| 46592a6929ec62012bb1b089026b9df6c4827ff9 |
|
21-May-2012 |
Jarkko Sakkinen <jarkko.sakkinen@intel.com> |
x86, relocs: Build clean fix
commit b2d668da9307c4c163dd603d2bb3cadb10f9fd37 upstream.
relocs was not cleaned up when "make clean" is issued. This
patch fixes the issue.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Link: http://lkml.kernel.org/r/1337622684-6834-1-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 6520fe5564acf07ade7b18a1272db1184835c487 |
|
08-May-2012 |
H. Peter Anvin <hpa@linux.intel.com> |
x86, realmode: 16-bit real-mode code support for relocs tool
A new option is added to the relocs tool called '--realmode'.
This option causes the generation of 16-bit segment relocations
and 32-bit linear relocations for the real-mode code. When
the real-mode code is moved to the low-memory during kernel
initialization, these relocation entries can be used to
relocate the code properly.
In the assembly code 16-bit segment relocations must be relative
to the 'real_mode_seg' absolute symbol. Linear relocations must be
relative to a symbol prefixed with 'pa_'.
16-bit segment relocation is used to load cs:ip in 16-bit code.
Linear relocations are used in the 32-bit code for relocatable
data references. They are declared in the linker script of the
real-mode code.
The relocs tool is moved to arch/x86/tools/relocs.c, and added new
target archscripts that can be used to build scripts needed building
an architecture. be compiled before building the arch/x86 tree.
[ hpa: accelerating this because it detects invalid absolute
relocations, a serious bug in binutils 2.22.52.0.x which currently
produces bad kernels. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org>
|
| c0e9afc0da6cb0f11497e5ea83377b3c451450e0 |
|
28-Mar-2012 |
Andi Kleen <ak@linux.intel.com> |
x86: Use -mno-avx when available
On gccs that support AVX it's a good idea to disable that too, similar to
how SSE2, SSE1 etc. are already disabled. This prevents the compiler
from generating AVX ever implicitely.
No failure observed, just from review.
[ hpa: Marking this for urgent and stable, simply because the patch
will either have absolutely no effect *or* it will avoid potentially
very hard to debug failures. ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1332960678-11879-1-git-send-email-andi@firstfloor.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
|
| 8bd69c2d5f9c0b5237c632d1b21dbfe4fd16ba6b |
|
28-Feb-2012 |
Ingo Molnar <mingo@elte.hu> |
x86/x32: Fix the binutils auto-detect
Fix:
arch/x86/Makefile:96: *** recipe commences before first target. Stop.
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 0bf6276392e990dd0da0ccd8e10f42597d503f29 |
|
27-Feb-2012 |
H. Peter Anvin <hpa@linux.intel.com> |
x32: Warn and disable rather than error if binutils too old
If X32 is enabled in .config, but the binutils can't build it, issue a
warning and disable the feature rather than erroring out.
In order to support this, have CONFIG_X86_X32 be the option set in
Kconfig, and CONFIG_X86_X32_ABI be the option set by the Makefile when
it is enabled and binutils has been found to be functional.
Requested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: H. J. Lu <hjl.tools@gmail.com>
Link: http://lkml.kernel.org/r/1329696488-16970-1-git-send-email-hpa@zytor.com
|
| 303395ac3bf3e2cb488435537d416bc840438fcb |
|
12-Nov-2011 |
H. Peter Anvin <hpa@linux.intel.com> |
x86: Generate system call tables and unistd_*.h from tables
Generate system call tables and unistd_*.h automatically from the
tables in arch/x86/syscalls. All other information, like NR_syscalls,
is auto-generated, some of which is in asm-offsets_*.c.
This allows us to keep all the system call information in one place,
and allows for kernel space and user space to see different
information; this is currently used for the ia32 system call numbers
when building the 64-bit kernel, but will be used by the x32 ABI in
the near future.
This also removes some gratuitious differences between i386, x86-64
and ia32; in particular, now all system call tables are generated with
the same mechanism.
Cc: H. J. Lu <hjl.tools@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
| d7acb92fea932ad2e7846480aeacddc2c03c8485 |
|
14-Oct-2010 |
H. Peter Anvin <hpa@linux.intel.com> |
x86-64, asm: If the assembler supports fxsave64, use it
Kbuild allows for us to probe for the existence of specific constructs
in the assembler, use them to find out if we can use fxsave64 and
permit the compiler to generate better code.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
| 08c2b394b98786ebb067e2a54d08f1f6f0d247da |
|
13-Sep-2010 |
basile@opensource.dyc.edu <basile@opensource.dyc.edu> |
x86, build: Disable -fPIE when compiling with CONFIG_CC_STACKPROTECTOR=y
The arch/x86/Makefile uses scripts/gcc-x86_$(BITS)-has-stack-protector.sh
to check if cc1 supports -fstack-protector. When -fPIE is passed to cc1,
these scripts fail causing stack protection to be disabled even when it
is available.
This fix is similar to commit c47efe5548abbf53c2f66e06dcb46183b11d6b22
Reported-by: Kai Dietrich <mail@cleeus.de>
Signed-off-by: Magnus Granberg <zorry@gentoo.org>
LKML-Reference: <20100913101319.748A1148E216@opensource.dyc.edu>
Signed-off-by: Anthony G. Basile <basile@opensource.dyc.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
| 9e565292270a2d55524be38835104c564ac8f795 |
|
14-May-2010 |
Roland McGrath <roland@redhat.com> |
x86: Use .cfi_sections for assembly code
The newer assemblers support the .cfi_sections directive so we can put
the CFI from .S files into the .debug_frame section that is preserved
in unstripped vmlinux and in separate debuginfo, rather than the
.eh_frame section that is now discarded by vmlinux.lds.S.
Signed-off-by: Roland McGrath <roland@redhat.com>
LKML-Reference: <20100514044303.A6FE7400BE@magilla.sf.frob.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
| 477346ff74f4c2aed50e8a0db96a61069f3e5b80 |
|
07-Jan-2010 |
Dave Airlie <airlied@redhat.com> |
x86-64: Allow fbdev primary video code
For some reason the 64-bit tree was doing this differently and
I can't see why it would need to.
This correct behaviour when you have two GPUs plugged in and
32-bit put the console in one place and 64-bit in another.
Signed-off-by: Dave Airlie <airlied@redhat.com>
LKML-Reference: <1262847894-27498-1-git-send-email-airlied@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
| 14a3f40aafacde1dfd6912327ae14df4baf10304 |
|
23-Oct-2009 |
Arjan van de Ven <arjan@infradead.org> |
x86: Remove STACKPROTECTOR_ALL
STACKPROTECTOR_ALL has a really high overhead (runtime and stack
footprint) and is not really worth it protection wise (the
normal STACKPROTECTOR is in effect for all functions with
buffers already), so lets just remove the option entirely.
Reported-by: Dave Jones <davej@redhat.com>
Reported-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Eric Sandeen <sandeen@redhat.com>
LKML-Reference: <20091023073101.3dce4ebb@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| caa27b66bd7188fd063769eaf4b33533ef0709e6 |
|
20-Jul-2009 |
Sam Ravnborg <sam@ravnborg.org> |
kbuild: use INSTALLKERNEL to select customized installkernel script
Replace the use of CROSS_COMPILE to select a customized
installkernel script with the possibility to set INSTALLKERNEL
to select a custom installkernel script when running make:
make INSTALLKERNEL=arm-installkernel install
With this patch we are now more consistent across
different architectures - they did not all support use
of CROSS_COMPILE.
The use of CROSS_COMPILE was a hack as this really belongs
to gcc/binutils and the installkernel script does not change
just because we change toolchain.
The use of CROSS_COMPILE caused troubles with an upcoming patch
that saves CROSS_COMPILE when a kernel is built - it would no
longer be installable.
[Thanks to Peter Z. for this hint]
This patch undos what Ian did in commit:
0f8e2d62fa04441cd12c08ce521e84e5bd3f8a46
("use ${CROSS_COMPILE}installkernel in arch/*/boot/install.sh")
The patch has been lightly tested on x86 only - but all changes
looks obvious.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Russell King <linux@arm.linux.org.uk> [arm]
Acked-by: Paul Mundt <lethal@linux-sh.org> [sh]
Acked-by: "H. Peter Anvin" <hpa@zytor.com> [x86]
Cc: Ian Campbell <icampbell@arcom.com>
Cc: Tony Luck <tony.luck@intel.com> [ia64]
Cc: Fenghua Yu <fenghua.yu@intel.com> [ia64]
Cc: Hirokazu Takata <takata@linux-m32r.org> [m32r]
Cc: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Cc: Kyle McMartin <kyle@mcmartin.ca> [parisc]
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> [powerpc]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390]
Cc: Thomas Gleixner <tglx@linutronix.de> [x86]
Cc: Ingo Molnar <mingo@redhat.com> [x86]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
| 23386d63bbb3199cf247313ec088878d72debcfd |
|
29-Aug-2009 |
Michal Schmidt <mschmidt@redhat.com> |
x86: Detect stack protector for i386 builds on x86_64
Stack protector support was not detected when building with
ARCH=i386 on x86_64 systems:
arch/x86/Makefile:80: stack protector enabled but no compiler support
The "-m32" argument needs to be passed to the detection script.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090829182718.10f566b1@leela>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--
|
| ca0e9badd1a39fecdd235f4bf1481b9da756e27b |
|
13-Aug-2009 |
Masami Hiramatsu <mhiramat@redhat.com> |
x86: X86 instruction decoder build-time selftest
Add a user-space selftest of x86 instruction decoder at kernel build
time.
When CONFIG_X86_DECODER_SELFTEST=y, Kbuild builds a test harness of x86
instruction decoder and performs it after building vmlinux.
The test compares the results of objdump and x86 instruction decoder
code and check there are no differences.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Przemysław Pawełczyk <przemyslaw@pawelczyk.it>
Cc: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
LKML-Reference: <20090813203421.31965.29006.stgit@localhost.localdomain>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
| 366d19e181be873c70f4aafca3931d77d781ccd7 |
|
21-Aug-2009 |
Tobias Doerffel <tobias.doerffel@gmail.com> |
x86: add specific support for Intel Atom architecture
Add another option when selecting CPU family so the kernel can be
optimized for Intel Atom CPUs. If GCC supports tuning options for
Intel Atom they will be used.
Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1251018457-19157-1-git-send-email-tobias.doerffel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| c7bd0414d681706a32105895cae20fb9090db52e |
|
23-Jul-2009 |
Frans Pop <elendil@planet.nl> |
x86: Simplify the Makefile in a minor way through use of cc-ifversion
Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
LKML-Reference: <200907232056.28635.elendil@planet.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| dfec072ecd35ba6ecad2d51dde325253ac9a2936 |
|
04-Apr-2008 |
Vegard Nossum <vegard.nossum@gmail.com> |
kmemcheck: add the kmemcheck core
General description: kmemcheck is a patch to the linux kernel that
detects use of uninitialized memory. It does this by trapping every
read and write to memory that was allocated dynamically (e.g. using
kmalloc()). If a memory address is read that has not previously been
written to, a message is printed to the kernel log.
Thanks to Andi Kleen for the set_memory_4k() solution.
Andrew Morton suggested documenting the shadow member of struct page.
Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
[export kmemcheck_mark_initialized]
[build fix for setup_max_cpus]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
[rebased for mainline inclusion]
Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
|
| 1648e4f805063137b55b869666e936ffd4419cdf |
|
17-Apr-2009 |
H. Peter Anvin <hpa@zytor.com> |
x86, kbuild: make "make install" not depend on vmlinux
It is common to use "make install" in restricted environments which
differ from the one which was actually used to build the kernel. In
such environments it is highly undesirable to trigger a rebuild of any
part of the system. Worse, the rebuild may be spurious, triggered by
differences in the environment.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <20090415234642.GA28531@uranus.ravnborg.org>
|
| d1f0ae5e2e45e74cff4c3bdefb0fc77608cdfeec |
|
15-Apr-2009 |
Sam Ravnborg <sam@ravnborg.org> |
x86: standardize Kbuild rules
Introducing this Kbuild file allow us to:
make arch/x86/
And thus building all the core part of x86.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 16a6791934a1077609482dd6c091aa8b4c39a834 |
|
12-Mar-2009 |
H. Peter Anvin <hpa@zytor.com> |
x86: use targets in the boot Makefile instead of CLEAN_FILES
Impact: cleanup
Instead of using CLEAN_FILES in arch/x86/Makefile, add generated files
to targets in arch/x86/boot/Makefile, so they will get naturally
cleaned up by "make clean".
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
| f9c5107c2bcad91dd56d23888653d7bfa1a9696e |
|
12-Mar-2009 |
H. Peter Anvin <hpa@zytor.com> |
x86: remove additional vestiges of the zImage/bzImage split
Impact: cleanup
Remove targets that were used for zImage only, and Makefile
infrastructure that was there to support the zImage/bzImage split.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
LKML-Reference: <1236879901.24144.26.camel@test.thuisdomein>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
| 5d707e9c8ef2a3596ed5c975c6ff05cec890c2b4 |
|
09-Feb-2009 |
Tejun Heo <tj@kernel.org> |
stackprotector: update make rules
Impact: no default -fno-stack-protector if stackp is enabled, cleanup
Stackprotector make rules had the following problems.
* cc support test and warning are scattered across makefile and
kernel/panic.c.
* -fno-stack-protector was always added regardless of configuration.
Update such that cc support test and warning are contained in makefile
and -fno-stack-protector is added iff stackp is turned off. While at
it, prepare for 32bit support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 6bda2c8b32febeb38ee128047253751e080bad52 |
|
28-Jan-2009 |
Ingo Molnar <mingo@elte.hu> |
x86: remove subarchitecture support
Remove the 32-bit subarchitecture support code.
All subarchitectures but Voyager have been converted. Voyager will be
done later or will be removed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 7b38725318f4517af6168ccbff99060d67aba1c8 |
|
28-Jan-2009 |
Ingo Molnar <mingo@elte.hu> |
x86: remove subarchitecture support code
Remove remaining bits of the subarchitecture code. Now that all the
special platforms are runtime probed and runtime handled, we can remove
these facilities.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| bb8985586b7a906e116db835c64773b7a7d51663 |
|
18-Aug-2008 |
Al Viro <viro@zeniv.linux.org.uk> |
x86, um: ... and asm-x86 move
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
| 1f972768a1df1518f45adb6b8ffbf04fa1c99737 |
|
26-Jul-2008 |
Ingo Molnar <mingo@elte.hu> |
x86, RDC321x: add to mach-default
first step to add RDC321x support to the default PC architecture.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 62fa572f6933038b3d79558812de88702bda176f |
|
10-Jul-2008 |
Ingo Molnar <mingo@elte.hu> |
x86, VisWS: turn into generic arch, remove leftover files
remove leftover arch/x86/mach-visws/* files.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 1b84e1c81f56e13c7d81b47c85eda15d94624e43 |
|
10-Jul-2008 |
Ingo Molnar <mingo@elte.hu> |
x86, VisWS: turn into generic arch, flip over VISWS to generic arch
this is the big move: flip over VISWS to generic arch support.
From this commit on CONFIG_X86_VISWS is just another (default-disabled)
option that turns on certain quirks - no other complications.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| d49c4288407b2ffa8cab270cb5bc6882abe969f6 |
|
09-Jun-2008 |
Yinghai Lu <yhlu.kernel@gmail.com> |
x86: make generic arch support NUMAQ
... so it could fall back to normal numa and we'd reduce the impact of the
NUMAQ subarch.
NUMAQ depends on GENERICARCH
also decouple genericarch numa from acpi.
also make it fall back to bigsmp if apicid > 8.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 0c51a965ed3c44dd50497e74492a015680e49899 |
|
02-Jun-2008 |
Huang, Ying <ying.huang@intel.com> |
x86: extract common part of head32.c and head64.c into head.c
This patch extracts the common part of head32.c and head64.c into head.c.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: andi@firstfloor.org
Cc: mingo@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| b40a4392a3c262e0d1b5379b4e142a8eefa63439 |
|
18-Apr-2008 |
Arjan van de Ven <arjan@linux.intel.com> |
stackprotector: turn not having the right gcc into a #warning
If the user selects the stack-protector config option, but does not have
a gcc that has the right bits enabled (for example because it isn't build
with a glibc that supports TLS, as is common for cross-compilers, but also
because it may be too old), then the runtime test fails right now.
This patch adds a warning message for this scenario. This warning accomplishes
two goals
1) the user is informed that the security option he selective isn't available
2) the user is suggested to turn of the CONFIG option that won't work for him,
and would make the runtime test fail anyway.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 41b3eae669fb1ef6ae4acaa937b4e4617a1aa078 |
|
22-Apr-2008 |
Jan Beulich <jbeulich@novell.com> |
x86: minor polishing to top-level arch Makefile
Use build target when creating compatibility link, and use $(boot)
where possible.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| ee09efc3e4173632471d2dff6ca42e21930c94fe |
|
19-Mar-2008 |
Glauber de Oliveira Costa <gcosta@redhat.com> |
x86: add subarch support (for headers) to x86_64
this patch allows x86_64 to use subarch mach_ headers
in practice, since x86_64 does not have any subarch, it
will use mach_default. But it will allow for substantially
less code duplication
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 700efc1b9f6afe34caae231b87d129ad8ffb559f |
|
23-Feb-2008 |
Eric W. Biederman <ebiederm@xmission.com> |
x86: introduce kernel/head32.c
Copy x86_64 and add a head32.c so we can start moving early
architecture initialization out of assembly.
[ Sam Ravnborg <sam@ravnborg.org>: updated it to x86 ]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| 3f85d63ea4ff922f6abdb509f4aaf6993b3273a3 |
|
16-Feb-2008 |
Sam Ravnborg <sam@ravnborg.org> |
x86: fix vdso_install breaks user "make install"
I suggest to make the vdso_install step independent as
in following patch.
This solves the issue at ahnd and still gives us the posibility
to install the files should they be needed.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| cf7700fe24301df2c8d3636cf40784651c098207 |
|
09-Feb-2008 |
Rafael J. Wysocki <rjw@sisk.pl> |
x86 PM: move 64-bit hibernation files to arch/x86/power
Move arch/x86/kernel/suspend_64.c to arch/x86/power .
Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power
as hibernate_asm_64.S .
Update purpose and copyright information in
arch/x86/power/suspend_64.c and
arch/x86/power/hibernate_asm_64.S .
Update the Makefiles in arch/x86, arch/x86/kernel and
arch/x86/power to reflect the above changes.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 1622ac23bd3568c3ae8bb391dd3adb51887d7141 |
|
04-Feb-2008 |
Ian Campbell <ijc@hellion.org.uk> |
x86: define OBJCOPYFLAGS explicitly for each target.
Do this rather than defining a global version and overriding it in
almost all cases in order to make subsequent patches simpler.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
| e3c2a998afcb6de179ad954ee0113cfbcc42083e |
|
01-Feb-2008 |
Steven Rostedt <rostedt@goodmis.org> |
fix directory entry in arch-x86-Makefile
Doing a make randconfig I came across this error in the Makefile.
This patch makes a directory out of arch/x86/mach-default for
CONFIG_X86_RDC321X
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| edf884172e9828c6234b254208af04655855038d |
|
16-Dec-2007 |
Avi Kivity <avi@qumranet.com> |
KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support. Note that while
ioapic.c could potentially be shared with ia64, it is also moved.
Signed-off-by: Avi Kivity <avi@qumranet.com>
|
| 5e3a77e9a9b7bfc1f69f51fe6d34aa649887980c |
|
30-Jan-2008 |
Florian Fainelli <florian.fainelli@telecomint.eu> |
x86: add support for the RDC R-321x SoC
This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.
Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 37f30e21d6be046e948fce1dfa4a968cf5abcf89 |
|
30-Jan-2008 |
Andi Kleen <ak@suse.de> |
x86: document fdimage/isoimage completely in make help
Add missing targets and missing options in x86 make help
[ mingo@elte.hu: more whitespace cleanups ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 4ba7e5cd499a72983e6d011e76c1d8fad896d310 |
|
30-Jan-2008 |
Sam Ravnborg <sam@ravnborg.org> |
x86: biarch support for 32 bit builds beautified
There were no reason to mess around with CC, AS and LD.
Fixing this up avoided duplicated option for ld.
A small fixlet were needed in boot/Makefile which assumed
that CC were modified.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 25dfeeb757bdf06521d65973676b21dac1d26d20 |
|
30-Jan-2008 |
Sam Ravnborg <sam@ravnborg.org> |
x86: share more options between 32 and 64 bit build
On recommendation from Andi Kleen share a few more options
between 32 and 64 bit builds.
A defconfig build for i386 did not show any difference in
size of text and data.
The additional shared options are:
-Wno-sign-compare
-fno-asynchronous-unwind-tables
-mno-sse
-mno-mmx
-mno-sse2
-mno-3dnow
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 0a6ef376d4baf298aaa2db71794df821a0d7795c |
|
30-Jan-2008 |
Sam Ravnborg <sam@ravnborg.org> |
x86: unification of arch/x86/Makefiles
Unify the 32 and 64 bit specific Makefiles.
The unification was simplest to do in one step although the
readability of the patch suffers a bit from this.
Noteworthy remarks on the unification:
- The 64 bit cpu stuff should be moved to Makefile_32.cpu
but I did not feel confident doing it due to subtle differences
- The use of cflags-y were abandoned since we have seen one bug where
we did wrong due to missing assignment to KBUILD_CFLAGS.
The cc-option marcro uses KBUILD_CFLAGS.
- The "No need to remake" line are deleted. It caused "make -B" to fail
- For 64 bit the sub architecture stuff is not used.
- The way head64.o is specified could be nicer - but it awaits the
introduction of head32.o (which seems like a win to introduce for readability)
- Patch is checkpatch clean
Patch is tested by doing a defconfig build for i386 and x86_64 and in both
cases monitoring that only relevant files were recompiled when applying
the patch.
[ mingo@elte.hu: build fix ]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 8c6531f7a99f29ba8817ffb12cc9ecf190049bd6 |
|
19-Nov-2007 |
Andreas Herrmann <aherrman@arcor.de> |
x86: correctly set UTS_MACHINE for "make ARCH=x86"
For a kernel built with "make ARCH=x86" the following system
information is displayed when running the new kernel
$ uname -m
x86
On some i386 systems (e.g. K7) we even have the following information
$ uname -m
x66
This is weird. The usual information for "uname -m" should be "x86_64"
on 64-bit and "i386" or "i686" on 32-bit.
This patch fixes the issue by setting UTS_MACHINE to "i386" for 32-bit
kernel builds and to "x86_64" for 64-bit kernel builds. I.e., "x86"
won't be used for UTS_MACHINE anymore.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 43517854da512ae7daf15e7044e040edb15b8b23 |
|
26-Nov-2007 |
Andreas Herrmann <aherrman@arcor.de> |
x86: correctly set UTS_MACHINE for "make ARCH=x86"
x86: correctly set UTS_MACHINE for "make ARCH=x86"
For a kernel built with "make ARCH=x86" the following system
information is displayed when running the new kernel
$ uname -m
x86
On some i386 systems (e.g. K7) we even have the following information
$ uname -m
x66
This is weird. The usual information for "uname -m" should be "x86_64"
on 64-bit and "i386" or "i686" on 32-bit.
This patch fixes the issue by setting UTS_MACHINE to "i386" for 32-bit
kernel builds and to "x86_64" for 64-bit kernel builds. I.e., "x86"
won't be used for UTS_MACHINE anymore.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@redhat.com>
|
| d746d647f31bd3664f4a23985b78654129ffc1db |
|
12-Nov-2007 |
Sam Ravnborg <sam@ravnborg.org> |
x86: do not use $(ARCH) when not needed
For x86 ARCH may say i386 or x86_64 and soon x86.
Rely on CONFIG_X64_32 to select between 32/64 or just
hardcode the value as appropriate.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
|
| 2266cfd50de3872e877eeca3dd4a6f940f22ba60 |
|
25-Oct-2007 |
Sam Ravnborg <sam@ravnborg.org> |
x86: move defconfig files for i386 and x86_64 to x86
With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|
| 74b469f2e6b1589118b6ac05c7256add01e572d2 |
|
25-Oct-2007 |
Sam Ravnborg <sam@ravnborg.org> |
x86: move i386 and x86_64 Makefiles to arch/x86
Moving the ARCH specific Makefiles for i386 and x86_64
required a litle bit tweaking in the top-lvel Makefile.
SRCARCH is now set in the top-level Makefile
because we need this info to include the correct
arch Makefile.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
|