| a3664b51c783aaa0dde1c95334d1a670d6d54590 |
|
12-Jan-2012 |
Axel Lin <axel.lin@gmail.com> |
i2c/busses: Use module_platform_driver()
Convert the drivers in drivers/i2c/busses/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Cc: Ben Dooks <ben-linux@fluff.org>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Yong Zhang <yong.zhang0@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| d6748066ad0e8b2514545998f8367ebb3906f299 |
|
03-Nov-2011 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
MIPS: O32: Provide definition of registers ta0 .. ta3.
MIPS: perf: Add Octeon support for hardware perf.
MIPS: perf: Add support for 64-bit perf counters.
MIPS: perf: Reorganize contents of perf support files.
MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
MIPS: Add accessor macros for 64-bit performance counter registers.
MIPS: Add probes for more Octeon II CPUs.
MIPS: Add more CPU identifiers for Octeon II CPUs.
MIPS: XLR, XLS: Add comment for smp setup
MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
MIPS: JZ4740: GPIO: Simplify IRQ demuxer
MIPS: JZ4740: Use generic irq chip
MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
MIPS: Alchemy: kill au1xxx.h header
MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
MIPS: Alchemy: Redo PCI as platform driver
MIPS: Alchemy: more base address cleanup
MIPS: Alchemy: rewrite USB platform setup.
MIPS: Alchemy: abstract USB block control register access
...
Fix up trivial conflicts in:
arch/mips/alchemy/devboards/db1x00/platform.c
drivers/ide/Kconfig
drivers/mmc/host/au1xmmc.c
drivers/video/Kconfig
sound/mips/Kconfig
|
| 46f344e2a0844d9b068bffa38cb48b52f4bd2d4a |
|
22-Oct-2011 |
Manuel Lauss <manuel.lauss@googlemail.com> |
i2c-au1550: dev_pm_ops conversion
use newer dev_pm_ops for PM
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 84785f120f4d64c5fa8cf4bab1cf07c2507d434f |
|
22-Oct-2011 |
Manuel Lauss <manuel.lauss@googlemail.com> |
i2c-au1550: increase timeout waiting for master done
Double the timeout in the loop which busy-waits for the "master-done"
bit to be set. This bit indicates whether an i2c transaction has
completed; on the DB1300 and DB1550 boards this timeout is slightly
too short and causes transactions to the WM8731 codec to be falsely flagged
as failed. The timeout itself is necessary since transactions to
non-existant slaves never set this bit in the first place (and cause
i2cdetect to hang).
With this change the WM8731 codec on the DB1300/DB1550 boards is correctly
detected and initialized.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 85ea25698843d37b6f79927b2995644623fe1e06 |
|
22-Oct-2011 |
Manuel Lauss <manuel.lauss@googlemail.com> |
i2c-au1550: remove unused ack_timeout
The ack_timeout context member is unused, get rid of it.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
/drivers/i2c/busses/i2c-au1550.c
|
| c5de6467d2a54eb81b139f29b217d0394e8a790c |
|
22-Oct-2011 |
Manuel Lauss <manuel.lauss@googlemail.com> |
i2c-au1550: remove usage of volatile keyword
Replace the usage of "volatile"s with register accessor functions.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 50d5676ebac57c187ac347bae24290f0dc16fdbe |
|
12-Aug-2011 |
Manuel Lauss <manuel.lauss@googlemail.com> |
MIPS: Alchemy: kill au1xxx.h header
No longer required
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2705/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
/drivers/i2c/busses/i2c-au1550.c
|
| c6ffddea36dd576b70dfbd10eb5d2b287b786dca |
|
14-Jun-2009 |
Linus Walleij <linus.walleij@stericsson.com> |
i2c: Use resource_size macro
This replace all instances in the i2c busses tree of
res->end - res->start + 1 with the handy macro resource_size(res)
from ioport.h (coming in from platform_device.h).
This was created with a simple
sed -i -e 's/\([a-z]*\)->end *- *[a-z]*->start *+ *1/resource_size(\1)/g'
Then manually replacing the PXA redefiniton of the same kind
of macro manually. Recompiled some ARM defconfigs I could find to
make a rough test so it shouldn't break anything, though I
couldn't see exactly which configs you need for all the drivers.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 1745522ccbabd990bfc7511861aa9fa98287cba0 |
|
26-Jan-2009 |
Jean Delvare <khali@linux-fr.org> |
i2c: Delete many unused adapter IDs
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| f09f71b24e77a2f2b4e5c98311c8804fc61ad8bc |
|
14-Jul-2008 |
Manuel Lauss <mano@roarinelk.homelinux.net> |
i2c-au1550: Fix PM support
Fix driver power management:
- suspend the PSC while driver is idle.
- move PSC init/deinit to separate functions, as PSC must be
initialized/shutdown on resume/suspend.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 8e07c2c6af30dccfa573033d280980b2b5eb35fe |
|
05-Apr-2008 |
Sergei Shtylyov <sshtylyov@ru.mvista.com> |
[MIPS] Alchemy: SMBus resource fix
The Alchemy platform code registers the SMBus device using the virtual
address of its registers instead of the physical one -- fix this, taking
into account that actually the whole megabyte is decoded by any of the
programmable serial controllers (one of which is SMBus), and that all the
Alchemy peripherals are directly mappable into KSEG1 kernel space and
therefore ioremap() call would just boil down to CKSEG1ADDR() invocation.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
/drivers/i2c/busses/i2c-au1550.c
|
| add8eda7f2be781af0224241e870715cf0cfd75a |
|
22-Apr-2008 |
Kay Sievers <kay.sievers@vrfy.org> |
i2c: Fix platform driver hotplug/coldplug
Since 43cc71eed1250755986da4c0f9898f9a635cb3bf, the platform
modalias is prefixed with "platform:". Add MODULE_ALIAS() to the
hotpluggable I2C platform drivers, to allow module auto loading.
[ db: add some more drivers ]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 8b798c4d16b762d15f4055597ff8d87f73b35552 |
|
27-Jan-2008 |
Manuel Lauss <mano@roarinelk.homelinux.net> |
i2c-au1550: Convert to platform driver
Convert the i2c-au1550 bus driver to platform driver, and
register a platform device for the Alchemy Db/Pb series of
boards.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 91f27958d686da713c3b0a1dc205288898e44124 |
|
27-Jan-2008 |
Manuel Lauss <mano@roarinelk.homelinux.net> |
i2c-au1550: properly terminate zero-byte transfers
Zero-bytes transfers would leave the bus transaction unfinished
(no i2c stop is sent), with the following transfer actually
sending the slave address to the previously addressed device,
resulting in weird device failures (e.g. reset minute register
values in my RTC).
This patch instructs the controller to send an I2C STOP right after
the slave address in case of a zero-byte transfer.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| a202707e71ff16d5e3a92f40eeaa41f3099dd8c5 |
|
13-Oct-2007 |
Chris David <cd@chrisdavid.com> |
i2c-au1550: Fix a misused register problem
Fix a "mis-used register" problem on the AMD MIPS Alchemy au1550
I2C interface.
In summary, the programmable serial controller seems to hang the kernel
when I send a single 'address' byte on the I2C bus. The patch
essentially uses the PSC_SMBSTAT register's TE (transmit FIFO empty)
bit to check when the transmit FIFO is empty, instead of using the
PSC_SMBEVNT register's TU (transmit underflow) bit. Using the TE bit
fixed the hang problem.
Signed-off-by: Chris David <cd@chrisdavid.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
/drivers/i2c/busses/i2c-au1550.c
|
| 8f9082c5ce0e2c2f7ad0211b0c089f680d2efc11 |
|
03-Sep-2006 |
Jean Delvare <khali@linux-fr.org> |
i2c: Constify i2c_algorithm declarations, part 2
i2c: Constify i2c_algorithm declarations, part 2
Make struct i2c_algorithm declarations const in all i2c bus drivers
where it is possible.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| a294de4e97a7a0cdeb949a3b2fbd4d81addc6d8c |
|
13-Aug-2006 |
Domen Puncer <domen.puncer@ultra.si> |
i2c-au1550: Add I2C support for Au1200
i2c-au1550: Add I2C support for Au1200
Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| 6ed07134792655db12fddaafbf870425331a21f6 |
|
13-Aug-2006 |
Domen Puncer <domen.puncer@ultra.si> |
i2c-au1550: Add SMBus functionality flag
i2c-au1550: Add SMBus functionality flag
Add SMBus functionality flag, so we can use eeprom and similar
drivers.
Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| 8859942ede8154c1e90e3b0d1b60aecf0cfaa169 |
|
13-Aug-2006 |
Domen Puncer <domen.puncer@ultra.si> |
i2c-au1550: Fix timeout problem
i2c-au1550: Fix timeout problem
Fix from Jordan Crouse:
If the transmit and recieve FIFOS are not empty, forceably flush them
rather then waiting for them to drain on their own.
This solves at least a problem reported by Clem Taylor:
http://www.linux-mips.org/archives/linux-mips/2006-05/msg00240.html
(1% of I2C transactions would timeout)
Signed-off-by: Domen Puncer <domen.puncer@ultra.si>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| 1d8b9e1bad35fa3ea829990b9056c2a257d8fe79 |
|
11-Aug-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] I2C: Kill i2c_algorithm.id (4/7)
There are no more users of i2c_algorithm.id, so we can finally drop
this structure member.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| 975185880d55676b1352047e82a0cb84173c6c28 |
|
11-Aug-2005 |
Jean Delvare <khali@linux-fr.org> |
[PATCH] I2C: Kill i2c_algorithm.name (1/7)
The name member of the i2c_algorithm is never used, although all
drivers conscientiously fill it. We can drop it completely, this
structure doesn't need to have a name.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| f0bb60e7b1a0a26c25d8cbf81dda7afbc8bd2982 |
|
16-Apr-2005 |
Alexey Dobriyan <adobriyan@mail.ru> |
[PATCH] I2C: drivers/i2c/*: #include <linux/config.h> cleanup
Files that don't use CONFIG_* stuff shouldn't include config.h
Files that use CONFIG_* stuff should include config.h
It's that simple. ;-)
Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/i2c/busses/i2c-au1550.c
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
/drivers/i2c/busses/i2c-au1550.c
|