| dc4e96ce2dceb649224ee84f83592aac8c54c9b7 |
|
28-Aug-2010 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Don't exceed the max HW CQ depth
The max depth supported by T3 is 64K entries. This fixes a bug
introduced in commit 9918b28d ("RDMA/cxgb3: Increase the max CQ
depth") that causes stalls and possibly crashes in large MPI clusters.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 7960d6b9de7716e9080b47f6dc4d415d967e032d |
|
02-Apr-2010 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
RDMA/cxgb3: Use the dma state API instead of pci equivalents
The DMA API is preferred; no functional change.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 5279d3ac2d9ca578d04c6f0c760485b0621eb393 |
|
27-Jan-2010 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Don't allocate the SW queue for user mode CQs
Only kernel mode CQs need the SW queue memory allocated. The SW queue
for user mode CQs is allocated in userspace by libcxgb3.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 9918b28d2bf733816c5d1612fe17ca380b601b10 |
|
29-Jan-2010 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Increase the max CQ depth
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 45465487897a1c6d508b14b904dc5777f7ec7e04 |
|
21-Dec-2009 |
Stefani Seibold <stefani@seibold.net> |
kfifo: move struct kfifo in place
This is a new generic kernel FIFO implementation.
The current kernel fifo API is not very widely used, because it has to
many constrains. Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.
I think this are the reasons why kfifo is not in use:
- The API is to simple, important functions are missing
- A fifo can be only allocated dynamically
- There is a requirement of a spinlock whether you need it or not
- There is no support for data records inside a fifo
So I decided to extend the kfifo in a more generic way without blowing up
the API to much. The new API has the following benefits:
- Generic usage: For kernel internal use and/or device driver.
- Provide an API for the most use case.
- Slim API: The whole API provides 25 functions.
- Linux style habit.
- DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
- Direct copy_to_user from the fifo and copy_from_user into the fifo.
- The kfifo itself is an in place member of the using data structure, this save an
indirection access and does not waste the kernel allocator.
- Lockless access: if only one reader and one writer is active on the fifo,
which is the common use case, no additional locking is necessary.
- Remove spinlock - give the user the freedom of choice what kind of locking to use if
one is required.
- Ability to handle records. Three type of records are supported:
- Variable length records between 0-255 bytes, with a record size
field of 1 bytes.
- Variable length records between 0-65535 bytes, with a record size
field of 2 bytes.
- Fixed size records, which no record size field.
- Preserve memory resource.
- Performance!
- Easy to use!
This patch:
Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure. This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them. This
patch changes the implementation and all existing users.
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 04b5d028f50ff05a8f9ae049ee71f8fdfcf1f5de |
|
30-Mar-2009 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Handle EEH events
- wrap calls into cxgb3 and fail them if we're in the middle
of a PCI EEH event.
- correctly unwind and release endpoint and other resources when
we are in an EEH event.
- dispatch IB_EVENT_DEVICE_FATAL event when cxgb3 notifies iw_cxgb3 of
a fatal error.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 13220a94d35708d5378114e96ffcc88d0a74fe99 |
|
26-Mar-2009 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
ixgbe: Allow Priority Flow Control settings to survive a device reset
net: core: remove unneeded include in net/core/utils.c.
e1000e: update version number
e1000e: fix close interrupt race
e1000e: fix loss of multicast packets
e1000e: commonize tx cleanup routine to match e1000 & igb
netfilter: fix nf_logger name in ebt_ulog.
netfilter: fix warning in ebt_ulog init function.
netfilter: fix warning about invalid const usage
e1000: fix close race with interrupt
e1000: cleanup clean_tx_irq routine so that it completely cleans ring
e1000: fix tx hang detect logic and address dma mapping issues
bridge: bad error handling when adding invalid ether address
bonding: select current active slave when enslaving device for mode tlb and alb
gianfar: reallocate skb when headroom is not enough for fcb
Bump release date to 25Mar2009 and version to 0.22
r6040: Fix second PHY address
qeth: fix wait_event_timeout handling
qeth: check for completion of a running recovery
qeth: unregister MAC addresses during recovery.
...
Manually fixed up conflicts in:
drivers/infiniband/hw/cxgb3/cxio_hal.h
drivers/infiniband/hw/nes/nes_nic.c
|
| d1fbe04eee32ed2642cff139b8592866f1d43f41 |
|
25-Mar-2009 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Enforce required firmware
The cxgb3 NIC driver can handle more firmware versions than iw_cxgb3,
and since commit 8207befa ("cxgb3: untie strict FW matching") cxgb3
will load with firmware versions that iw_cxgb3 can't handle. The FW
major number indicates a specific interface between the FW and
iw_cxgb3. Thus if the major number of the running firmware does not
match the required version compiled into iw_cxgb3, then iw_cxgb3 must
not register that device.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| a73efd0a8552927ebe5dff84936f7fdac4f7e314 |
|
27-Jan-2009 |
Divy Le Ray <divy@chelsio.com> |
iw_cxgb3: handle chip reset notifications
Freeze activity when notified that the underlying chip
is getting reset on a EEH event or fatal error.
Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 52c8084b740c42af27d5bfa62cec7079d12fbc2b |
|
15-Jul-2008 |
Jon Mason <jon@opengridcomputing.com> |
RDMA/cxgb3: Propagate HW page size capabilities
cxgb3 does not currently report the page size capabilities, and
incorrectly reports them internally.
This version changes the bit-shifting to a static value (per Steve's
request).
Signed-off-by: Jon Mason <jon@opengridcomputing.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 97d1cc8055c7b3fbd35bf693775d61102e65d174 |
|
15-Jul-2008 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Fix up some ib_device_attr fields
- set fw_ver
- set hw_ver
- set max_qp_wr to something reasonable
- set max_cqe to something reasonable
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| e7e55829999deaab3f43e201a087731c02c54cf9 |
|
15-Jul-2008 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: MEM_MGT_EXTENSIONS support
- set IB_DEVICE_MEM_MGT_EXTENSIONS capability bit if fw supports it.
- set max_fast_reg_page_list_len device attribute.
- add iwch_alloc_fast_reg_mr function.
- add iwch_alloc_fastreg_pbl
- add iwch_free_fastreg_pbl
- adjust the WQ depth for kernel mode work queues to account for
fastreg possibly taking 2 WR slots.
- add fastreg_mr work request support.
- add local_inv work request support.
- add send_with_inv and send_with_se_inv work request support.
- removed useless duplicate enums/defines for TPT/MW/MR stuff.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 273748cc908a901d082b4da5a16b2541c9d78a02 |
|
07-May-2008 |
Roland Dreier <rolandd@cisco.com> |
RDMA/cxgb3: Fix severe limit on userspace memory registration size
Currently, iw_cxgb3 is severely limited on the amount of userspace
memory that can be registered in in a single memory region, which
causes big problems for applications that expect to be able to
register 100s of MB.
The problem is that the driver uses a single kmalloc()ed buffer to
hold the physical buffer list (PBL) for the entire memory region
during registration, which means that 8 bytes of contiguous memory are
required for each page of memory being registered. For example, a 64
MB registration will require 128 KB of contiguous memory with 4 KB
pages, and it unlikely that such an allocation will succeed on a busy
system.
This is purely a driver problem: the temporary page list buffer is not
needed by the hardware, so we can fix this by writing the PBL to the
hardware in page-sized chunks rather than all at once. We do this by
splitting the memory registration operation up into several steps:
- Allocate PBL space in adapter memory for the full registration
- Copy PBL to adapter memory in chunks
- Allocate STag and enable memory region
This also allows several other cleanups to the __cxio_tpt_op()
interface and related parts of the driver.
This change leaves the reregister memory region and memory window
operations broken, but they already didn't work due to other
longstanding bugs, so fixing them will be left to a later patch.
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| c8286944b802c5ce4063ec3c334b38c6757a9434 |
|
02-May-2008 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: QP flush fixes
- Flush the QP only after the HW disables the connection. Currently
we flush the QP when transitioning to CLOSING. This exposes a race
condition where the HW can complete a RECV WR, for instance, -and-
the SW can flush that same WR.
- Only call CQ event handlers on flush IFF we actually flushed something.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| ccaf10d0ad17bf755750160ebe594de7261a893e |
|
29-Apr-2008 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Set the max_mr_size device attribute correctly
cxgb3 only supports 4GB memory regions. The lustre RDMA code uses
this attribute and currently has to code around our bad setting.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| 2b540355cd2f46c5445030995e72c4b4fb2b775e |
|
21-Feb-2007 |
Adrian Bunk <bunk@stusta.de> |
RDMA/cxgb3: cleanups
- don't mark static functions in C files as inline - gcc should know
best whether inlining makes sense
- never compile the unused cxio_dbg.c
- make the following needlessly global functions static:
- cxio_hal.c: cxio_hal_clear_qp_ctx()
- iwch_provider.c: iwch_get_qp()
- remove the following unused global functions:
- cxio_hal.c: cxio_allocate_stag()
- cxio_resource.: cxio_hal_get_rhdl()
- cxio_resource.: cxio_hal_put_rhdl()
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| c52daa29760818772ee4211be4ee8d1c78b888d5 |
|
15-Feb-2007 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Remove Open Grid Computing copyrights in iw_cxgb3 driver
Remove the Open Grid Computing copyright. It shouldn't be there.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|
| b038ced7b3705bf0ac9b30e118af0f56ab48b847 |
|
13-Feb-2007 |
Steve Wise <swise@opengridcomputing.com> |
RDMA/cxgb3: Add driver for Chelsio T3 RNIC
Add an RDMA/iWARP driver for the Chelsio T3 1GbE and 10GbE adapters.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
/drivers/infiniband/hw/cxgb3/cxio_hal.h
|