957265bd4fe182af757886f117416d66f68854aa |
|
27-Apr-2012 |
Colin Cross <ccross@android.com> |
Merge commit 'v3.4-rc4' into android-3.4
|
8eaeb9393397be8eb700ab38a69c450975463b77 |
|
03-Apr-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
mfd: Convert twl6040 to i2c driver, and separate it from twl core Complete the separation of the twl6040 from the twl core since it is a separate chip, not part of the twl6030 PMIC. Make the needed Kconfig changes for the depending drivers at the same time to avoid breaking the kernel build (vibra, ASoC components). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonicro.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
9cc8899de3cf51d04bca3bd324400a561a335dd6 |
|
15-Dec-2008 |
Mike Lockwood <lockwood@android.com> |
input: keychord: Add keychord driver This driver allows userspace to receive notification when client specified key combinations are pressed. The client opens /dev/keychord and writes a list of keychords for the driver to monitor. The client then reads or polls /dev/keychord for notifications. A client specified ID for the keychord is returned from read() when a keychord press is detected. Signed-off-by: Mike Lockwood <lockwood@android.com> keychord: fix to build without CONFIG_PREEMPT Change-Id: I911f13aeda4224b6fa57863bc7e8972fec8837fb
/drivers/input/misc/Kconfig
|
c3fffcb1895a47ea29892243af23b67a3c989174 |
|
16-Oct-2008 |
Arve Hjønnevåg <arve@android.com> |
Input: Generic GPIO Input device. Supports keyboard matrixces, direct inputs, direct outputs and axes connected to gpios. Change-Id: I5e921e6e3a1cc169316ee3b665f4cc21b5735114 Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Nick Pelly <npelly@google.com>
/drivers/input/misc/Kconfig
|
7bfe0e66d5da32961f0060fc5d96b739b1ed64b9 |
|
23-Mar-2012 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "- we finally merged driver for USB version of Synaptics touchpads (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo); - a bunch of new drivers for embedded platforms (Cypress touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x touchscreens, TI touchscreen); - input core allows clients to specify desired clock source for timestamps on input events (EVIOCSCLOCKID ioctl); - input core allows querying state of all MT slots for given event code via EVIOCGMTSLOTS ioctl; - various driver fixes and improvements." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: ili210x - add support for Ilitek ILI210x based touchscreens Input: altera_ps2 - use of_match_ptr() Input: synaptics_usb - switch to module_usb_driver() Input: convert I2C drivers to use module_i2c_driver() Input: convert SPI drivers to use module_spi_driver() Input: omap4-keypad - move platform_data to <linux/platform_data> Input: kxtj9 - who_am_i check value and initial data rate fixes Input: add driver support for MAX8997-haptic Input: tegra-kbc - revise device tree support Input: of_keymap - add device tree bindings for simple key matrices Input: wacom - fix physical size calculation for 3rd-gen Bamboo Input: twl4030-vibra - really switch from #if to #ifdef Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible Input: max8925_onkey - avoid accessing input device too early Input: max8925_onkey - allow to be used as a wakeup source Input: atmel-wm97xx - convert to dev_pm_ops Input: atmel-wm97xx - set driver owner Input: add cyttsp touchscreen maintainer entry Input: cyttsp - remove useless checks in cyttsp_probe() Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037 ...
|
104594b01ce750c91a19e9f1d8fe6b24ea8f9a59 |
|
16-Mar-2012 |
Donggeun Kim <dg77.kim@samsung.com> |
Input: add driver support for MAX8997-haptic The MAX8997-haptic function can be used to control motor. User can control the haptic driver by using force feedback framework. Signed-off-by: Donggeun Kim <dg77.kim@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
4bc25af79ec54b79266148f8c1b84bb1e7ff2621 |
|
06-Jan-2012 |
Andrew Jones <drjones@redhat.com> |
xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps PV-on-HVM guests may want to use the xen keyboard/mouse frontend, but they don't use the xen frame buffer frontend. For this case it doesn't make much sense for INPUT_XEN_KBDDEV_FRONTEND to depend on XEN_FBDEV_FRONTEND. The opposite direction always makes more sense, i.e. if you're using xenfb, then you'll want xenkbd. Switch the dependencies. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
/drivers/input/misc/Kconfig
|
f0c5f65bc5729e94c62953eae0712b392f09bec1 |
|
04-Mar-2012 |
Ashish Jangam <ashish.jangam@kpitcummins.com> |
Input: add support for OnKey module for DA9052/53 PMIC On-key Driver for Dialog Semiconductor DA9052/53 PMICs. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
393f9ffb7956c0ab8edb971d2c98d94aad9eeef8 |
|
31-Jan-2012 |
Masanari Iida <standby24x7@gmail.com> |
Input: pcf8574_keypad - fix typo in Kconfig Correct spelling "connetced" to "connected" in pcf8574_keypad description in drivers/input/misc/Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
ff803ed4ddbbf9f4bbd439b5e23dc25a4e0cce7a |
|
12-Dec-2011 |
Courtney Cavin <courtney.cavin@sonyericsson.com> |
Input: add driver for Sharp gp2ap002a00f proximity sensor This driver adds support for Sharp's GP2AP002A00F proximity sensor. The proximity is measured as a binary switch, i.e. an object is either detected or not detected. Hence, this driver is implemented as a switch that reports SW_FRONT_PROXIMITY. Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
3bfd5c5baf66e975b0f365a0cda8d75bf2953ebe |
|
29-Nov-2011 |
Heiko Stübner <heiko@sntech.de> |
Input: add generic GPIO-tilt driver There exist tilt switches that simply report their tilt-state via some gpios. The number and orientation of their axes can vary depending on the switch used and the build of the device. Also two or more one-axis switches could be combined to provide multi-dimensional orientation. One example of a device using such a switch is the family of Qisda ebook readers, where the switch provides information about the landscape / portrait orientation of the device. The example in Documentation/input/gpio-tilt.txt documents exactly this one-axis device. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
a0a4194c943bc64dd7b6e26cccb036cb26b81363 |
|
03-Nov-2011 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6 * 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c
|
1eb63378354ac37b7e27d256bbf84684751bac32 |
|
31-Oct-2011 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits) [media] pctv452e: Remove bogus code [media] adv7175: Make use of media bus pixel codes [media] media: vb2: fix incorrect return value [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES [media] cx23885: Stop the risc video fifo before reconfiguring it [media] cx23885: Avoid incorrect error handling and reporting [media] cx23885: Avoid stopping the risc engine during buffer timeout [media] cx23885: Removed a spurious function cx23885_set_scale() [media] cx23885: v4l2 api compliance, set the audioset field correctly [media] cx23885: hook the audio selection functions into the main driver [media] cx23885: add generic functions for dealing with audio input selection [media] cx23885: fixes related to maximum number of inputs and range checking [media] cx23885: Initial support for the MPX-885 mini-card [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use [media] cx23885: Enable audio line in support from the back panel [media] cx23885: Allow the audio mux config to be specified on a per input basis [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs [media] cx23885: Name an internal i2c part and declare a bitfield by name [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming [media] cx23885: remove channel dump diagnostics when a vbi buffer times out ... Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header file rename vs add)
|
30fc7ac3f62945a714d9842edae313a757efb49d |
|
18-Sep-2011 |
Philippe Rétornaz <philippe.retornaz@epfl.ch> |
input: Add power button support for mc13783 This adds support for the power-on buttons of MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
9688efda3fb0abb487ae44ced1dd02d14a4312c4 |
|
06-Aug-2011 |
Anssi Hannula <anssi.hannula@iki.fi> |
[media] move ati_remote driver from input/misc to media/rc The driver will be migrated to the RC driver API in a following commit. [mchehab@redhat.com: Fix some bad whitespacing] Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
/drivers/input/misc/Kconfig
|
7e66eaf14e19c032433be7c4df3c892fa2a5282f |
|
07-Sep-2011 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge commit 'v3.1-rc4' into next
|
c17ca3f5a2c98784739bbbcc3f6b6ee177f4f201 |
|
09-Aug-2011 |
Eric Andersson <eric.andersson@unixphere.com> |
Input: add driver for Bosch Sensortec's BMA150 accelerometer Signed-off-by: Albert Zhang <xu.zhang@bosch-sensortec.com> Signed-off-by: Eric Andersson <eric.andersson@unixphere.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
11205bb63e5c2e5174f377595103005b00c68370 |
|
02-Aug-2011 |
Amy Maloche <amaloche@codeaurora.org> |
Input: add support for pm8xxx based vibrator driver Add support for pm8xx based vibrator to facilitate haptics. This module uses the ff-memless framework. Signed-off-by: Amy Maloche <amaloche@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
70a3eff5768350c0313a9ae70a15da113171d0ab |
|
27-Jul-2011 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (53 commits) Input: synaptics - fix reporting of min coordinates Input: tegra-kbc - enable key autorepeat Input: kxtj9 - fix locking typo in kxtj9_set_poll() Input: kxtj9 - fix bug in probe() Input: intel-mid-touch - remove pointless checking for variable 'found' Input: hp_sdc - staticize hp_sdc_kicker() Input: pmic8xxx-keypad - fix a leak of the IRQ during init failure Input: cy8ctmg110_ts - set reset_pin and irq_pin from platform data Input: cy8ctmg110_ts - constify i2c_device_id table Input: cy8ctmg110_ts - fix checking return value of i2c_master_send Input: lifebook - make dmi callback functions return 1 Input: atkbd - make dmi callback functions return 1 Input: gpio_keys - switch to using SIMPLE_DEV_PM_OPS Input: gpio_keys - add support for device-tree platform data Input: aiptek - remove double define Input: synaptics - set minimum coordinates as reported by firmware Input: synaptics - process button bits in AGM packets Input: synaptics - rename set_slot to be more descriptive Input: synaptics - fuzz position for touchpad with reduced filtering Input: synaptics - set resolution for MT_POSITION_X/Y axes ...
|
e8e70d83912b40c5c9ea7b85a6110b9925fbed62 |
|
07-Jul-2011 |
Chris Hudson <chudson@kionix.com> |
Input: add support for Kionix KXTJ9 accelerometer Signed-off-by: Chris Hudson <chudson@kionix.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
cc697d38392c92b7504e7719c65ae905f0a0618a |
|
01-May-2011 |
Misael Lopez Cruz <misael.lopez@ti.com> |
input: Add initial support for TWL6040 vibrator Add twl6040_vibra as a child of MFD device twl6040_codec. This implementation covers the PCM-to-PWM mode of TWL6040 vibrator module. Signed-off-by: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Tejun Heo <tj@kernel.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
57fe7251f5bfc4332f24479376de48a1e8ca6211 |
|
30-May-2011 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
MFD: twl4030-codec -> twl4030-audio: Rename the driver Rename the driver, and header file from twl4030-codec to twl4030-audio. To avoid breakage change depending drivers at the same time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> CC: Misael Lopez Cruz <misael.lopez@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
631b16e81eab82e2894425a94c3fc14bf21adb26 |
|
27-Jun-2011 |
Joseph Lai <joseph_lai@wistron.com> |
Input: add a driver to support InvenSense mpu3050 gyroscope chip This driver is registered as an input device. An IRQ is required in this basic driver configuration. Signed-off-by: Joseph Lai <joseph_lai@wistron.com> [Cleaned up PM_RUNTIME defines] Signed-off-by: Alan Cox <alan@linux.intel.com> [dtor@mail.ru: consolidated PM methods, some code rearrangement] Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
3ead8b5ddbe6ca8e79b24535f4119c9d4ffd91e3 |
|
22-Jun-2011 |
Eric Miao <eric.miao@linaro.org> |
Input: add support for mma8450 accelerometer Signed-off-by: Sammy He <r62914@freescale.com> Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
92d57a73e41047bff7d0812e06f893567876d455 |
|
13-May-2011 |
Trilok Soni <tsoni@codeaurora.org> |
input: Add support for Qualcomm PMIC8XXX power key Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
49851ca04c7f941ef6f5ca04751b0e0fefe9d50d |
|
17-Mar-2011 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: xen-kbdfront - move to drivers/input/misc drivers/input is reserved for input core code and input handlers with drivers belonging to one of the sub-directories. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
31b6ca0af758a88e5e769b48cc6dde037ee37b96 |
|
07-Jan-2011 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (58 commits) Input: wacom_w8001 - support pen or touch only devices Input: wacom_w8001 - use __set_bit to set keybits Input: bu21013_ts - fix misuse of logical operation in place of bitop Input: i8042 - add Acer Aspire 5100 to the Dritek list Input: wacom - add support for digitizer in Lenovo W700 Input: psmouse - disable the synaptics extension on OLPC machines Input: psmouse - fix up Synaptics comment Input: synaptics - ignore bogus mt packet Input: synaptics - add multi-finger and semi-mt support Input: synaptics - report clickpad property input: mt: Document interface updates Input: fix double equality sign in uevent Input: introduce device properties hid: egalax: Add support for Wetab (726b) Input: include MT library as source for kerneldoc MAINTAINERS: Update input-mt entry hid: egalax: Add support for Samsung NB30 netbook hid: egalax: Document the new devices in Kconfig hid: egalax: Add support for Wetab hid: egalax: Convert to MT slots ... Fixed up trivial conflict in drivers/input/keyboard/Kconfig
|
5b2e303f6df1e0b1a903950c5d613a20c8c71a37 |
|
29-Oct-2010 |
David Härdeman <david@hardeman.nu> |
[media] rc-core: convert winbond-cir Move winbond-cir from drivers/input/misc/ into drivers/media/rc/ and convert it to use rc-core. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
/drivers/input/misc/Kconfig
|
b029ffafe89cf4b97cf39e0225a5205cbbf9e02f |
|
01-Dec-2010 |
Hemanth V <hemanthv@ti.com> |
Input: add CMA3000 accelerometer driver Add support for CMA3000 Tri-axis accelerometer, which supports Motion detect, Measurement and Free fall modes. CMA3000 supports both I2C/SPI bus for communication, currently the driver supports I2C based communication. Signed-off-by: Hemanth V <hemanthv@ti.com> Reviewed-by: Jonathan Cameron <jic23@cam.ac.uk> Reviewed-by: Sergio Aguirre <saaguirre@ti.com> Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
77686517977e77d101c8a7b397717df00a88922b |
|
05-Sep-2010 |
Sundar R Iyer <sundar.iyer@stericsson.com> |
Input: add support for PowerOn button on the AB8500 MFD Add the PowerOn (PonKey) button support to detect power on/off events. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
e22739d02a13bb2099084d135f90f4ac6b6d01e1 |
|
14-Jul-2010 |
Lars-Peter Clausen <lars@metafoo.de> |
Input: Add pwm beeper driver This patch adds a simple driver which allows to use pwm based beepers (for example piezo elements) as a pcspkr-like device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
e27c729219ad24c8ac9a4b34cf192e56917565c5 |
|
25-Jun-2010 |
Michael Hennerich <michael.hennerich@analog.com> |
Input: add driver for ADXL345/346 Digital Accelerometers This is a driver for the ADXL345/346 Three-Axis Digital Accelerometers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Chris Verges <chrisv@cyberswitching.com> Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
3734574cac1002e4cf037e3591cf222b1e04dfa4 |
|
22-May-2010 |
Haojian Zhuang <haojian.zhuang@gmail.com> |
Input: enable onkey driver of max8925 When ONKEY is held for 3 seconds, KEY_POWER event is reported. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
6c04d7b3cf50a393f07f22a661d05d15db5dc6f6 |
|
22-Mar-2010 |
Barry Song <barry.song@analog.com> |
Input: ad714x - add support for the AD7143/8/7A parts Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
31a6296333b94964e9a073649840bb34d4603369 |
|
22-Mar-2010 |
Bryan Wu <cooloney@kernel.org> |
Input: add Analog Devices AD714x captouch input driver AD7142 and AD7147 are integrated capacitance-to-digital converters (CDCs) with on-chip environmental calibration for use in systems requiring a novel user input method. The AD7142 and AD7147 can interface to external capacitance sensors implementing functions such as buttons, scrollwheels, sliders, touchpads and so on. The chips don't restrict the specific usage. Depending on the hardware connection, one special target board can include one or several these components. The platform_data for the device's "struct device" holds these information. The data-struct defined in head file descript the hardware feature of button/scrollwheel/slider/touchpad components on target boards, which need be filled in the arch/mach-/. As the result, the driver is independent of boards. It gets the components layout from the platform_data, registers related devices, fullfills the algorithms and state machines for these components and report related input events to up level. Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
b91c4be730668e801aa6a2ea95f467cd9a1e0983 |
|
20-Mar-2010 |
Bryan Wu <cooloney@kernel.org> |
Input: add PCF8574 I2C keypad input device driver Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
3dd1b39497b6820219581af16e6a8831a582bb3a |
|
09-Mar-2010 |
Jari Vanhala <ext-jari.vanhala@nokia.com> |
Input: add driver for TWL4030 vibrator device TWL4030 Vibrator implemented via Force Feedback interface. This uses MFD TWL4030 codec and own dynamic workqueue. Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
6985403138b74ad28c8ddac8baf88869556bec9a |
|
03-Feb-2010 |
Haojian Zhuang <haojian.zhuang@marvell.com> |
input: Support onkey in 88pm860x Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
6604072798da52547111cc06afacb8d9f2a907cf |
|
04-Dec-2009 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: dm355evm_kbd - switch to using sparse keymap library Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
e97af4cbbe500e6a3f4e189fe9324c5b99192dd6 |
|
04-Dec-2009 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: wistron_btns - switch to using sparse keymap library The keymap manipulation code was split into a library module, so let's make us of it. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
0baa3de6eb677e5c9b4c38642c6619df2b4ef11f |
|
03-Nov-2009 |
David Härdeman <david@hardeman.nu> |
Input: winbond-cir - select LEDS_TRIGGERS drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so add an appropriate select to drivers/input/misc/Kconfig Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
d2b5ec3aa0784335f031239e71fb50924cac9e0d |
|
24-Sep-2009 |
Ingo Molnar <mingo@elte.hu> |
input: fix build failures caused by Kconfig Winbond WPCD376I Consumer IR hardware driver Kconfig entry Fix these warnings: drivers/built-in.o: In function `apanel_remove': apanel.c:(.text+0x56e852): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `apanel_probe': apanel.c:(.text+0x56eae3): undefined reference to `led_classdev_register' drivers/built-in.o: In function `acpi_fujitsu_hotkey_add': fujitsu-laptop.c:(.text+0x5d7647): undefined reference to `led_classdev_register' fujitsu-laptop.c:(.text+0x5d76b5): undefined reference to `led_classdev_register' drivers/built-in.o: In function `wbcir_probe': winbond-cir.c:(.devinit.text+0x5f375): undefined reference to `led_classdev_register' winbond-cir.c:(.devinit.text+0x5f663): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `wbcir_remove': winbond-cir.c:(.devexit.text+0x7f23): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `fujitsu_cleanup': fujitsu-laptop.c:(.exit.text+0xbe37): undefined reference to `led_classdev_unregister' fujitsu-laptop.c:(.exit.text+0xbe53): undefined reference to `led_classdev_unregister' It happens because the new INPUT_WINBOND_CIR driver relies on new-leds infrastructure - but does not select it in drivers/input/misc/Kconfig. But it selects LEDS_CLASS, which confuses a number of other drivers into thinking that all the leds infrastructure is in place. Fix this by selecting NEW_LEDS as well, like similar drivers do. Eventually, this whole leds infrastructure complexity should be cleaned up, it's been going on for years. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/misc/Kconfig
|
e258b80e691f1f3ae83a60aa80eaf7322bd55ec4 |
|
22-Sep-2009 |
David Härdeman <david@hardeman.nu> |
input: add a driver for the Winbond WPCD376I Consumer IR hardware Add a driver for the the Consumer IR (CIR) functionality of the Winbond WPCD376I chipset (found on e.g. Intel DG45FC motherboards). Signed-off-by: David Härdeman <david@hardeman.nu> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/misc/Kconfig
|
d0a821324819a2908b886ae8b2f33fc7824ff83f |
|
10-Aug-2009 |
Daniel Ribeiro <drwyrm@gmail.com> |
input: PCAP2 misc input driver This is a driver for misc input events for the PCAP2 PMIC, it handles the Power key and the Headphone button. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Ilya Petrov <ilya.muromec@gmail.com> Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
0c73b992dd4c645f050344cb13142c0fd3496824 |
|
15-Sep-2009 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
input: Add support for the WM831x ON pin The WM831x series of PMICs support control of initial power on through the ON pin on the device with soft control of the pin at other times. Represent this to userspace as KEY_POWER. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/drivers/input/misc/Kconfig
|
4832958218f96f98009c5e01729fbe2b48c7124c |
|
23-Jul-2009 |
Michael Hennerich <michael.hennerich@analog.com> |
Input: add Blackfin rotary input driver This driver handles the Blackfin on-chip rotary peripheral. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
93db6294958f62643a917e44d1abc85440e600cf |
|
20-Jun-2009 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
|
492d0f95e6927d60be6234c4b0dd500216e87e18 |
|
21-May-2009 |
Alessio Igor Bogani <abogani@texware.it> |
trivial: input/misc: Fix typo in Kconfig Signed-off-by: Alessio Igor Bogani <abogani@texware.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
/drivers/input/misc/Kconfig
|
eb990b5533cfbddfac6efe783a349525907d1c26 |
|
24-Apr-2009 |
David Brownell <dbrownell@users.sourceforge.net> |
Input: add dm355evm_keys driver Simple input driver support for the events reported by the MSP430 firmware on the DM355 EVM. Verified using the RC5 remote included with the kit; docs weren't quite right. Some of the keycode selections might need improvement; they can be remapped, so there's at least a runtime workaround. (I also suspect Linux may someday merit more generic support for RC5 based remote controls.) These events don't distinguish key press vs release events, so this reports both and then skips the next event if it's identical. The RC5 remote codes include a "toggle" bit that can help detect autorepeated keys; but this driver doesn't bother with those nuances. This driver relies on the drivers/mfd/dm355evm_msp.c code for core features, including sharing I2C access to this firmware with GPIO, LED, and RTC support. [dtor@mail.ru: fix error unwindng path in probe()] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
68d8bf0436001980461483f2d753206447f27685 |
|
20-Apr-2009 |
Felipe Balbi <me@felipebalbi.com> |
Input: add twl4030-pwrbutton driver This is part of the twl4030 multifunction device driver that supports reporting KEY_POWER events via the input layer. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
d061ebd57a046b3df8be8b76c387a95171059244 |
|
12-Apr-2009 |
Alexander Beregalov <a.beregalov@gmail.com> |
Input: hp_sdc_rtc should depend on serio Fix this build error when CONFIG_SERIO is not set hp_sdc_rtc.c:691: undefined reference to `hp_sdc_request_timer_irq' and so on.. "select should be used with care. select will force a symbol to a value without visiting the dependencies." Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
d9bdffd2102404e8ea5f71c5b88dad890984164d |
|
05-Mar-2009 |
Phil Sutter <n0-1@freewrt.org> |
Input: add driver for S1 button of rb532 Mikrotik's Routerboard 532 has two builtin buttons, from which one triggers a hardware reset. The other one is accessible through GPIO pin 1. Sadly, this pin is being multiplexed with UART0 input, so enabling it as interrupt source (as implied by the gpio-keys driver) is not possible unless UART0 has been turned off. The later one though is a rather bad idea as the Routerboard is an embedded device with only a single serial port, so it's almost always used as serial console device. This patch adds a driver based on INPUT_POLLDEV, which disables the UART and reconfigures GPIO pin 1 temporarily while reading the button state. This procedure works fine and has been tested as part of another, unpublished driver for this device. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
73969ff0eda233f140bcbed1251431387b43f383 |
|
05-Mar-2009 |
Daniel Mack <daniel@caiaq.de> |
Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
1851b06ac40c57fe4efe7ddefc3c04dab4f99e67 |
|
09-Jan-2009 |
Balaji Rao <balajirrao@openmoko.org> |
input: PCF50633 input driver Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
/drivers/input/misc/Kconfig
|
c04148f915e5ba7947752e6348e0da4cdab1329e |
|
08-Aug-2008 |
Alfred E. Heggestad <aeh@db.org> |
Input: add driver for USB VoIP phones with CM109 chipset Signed-off-by: Alfred E. Heggestad <aeh@db.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
48ad88b1f2caf87e3d02c34e1d7de2ce68370e27 |
|
19-Jul-2008 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
Input: sgi_btns - add support for SGI Indy volume buttons Also rename sgio2_btns to sgi_btns since the driver is not only for SGI O2 anymore. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
3bee2a04cf14f599e094a37445f2eb4e6bb316bc |
|
07-Jul-2008 |
Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
Input: new driver for SGI O2 volume buttons This driver adds support for the volume buttons on the front of every SGI O2 workstation. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
714c8a061092417d3ffb1d0f0522e3d092c730dd |
|
06-Jun-2008 |
Stas Sergeev <stsp@aknet.ru> |
Input: pcspkr - remove negative dependency on snd-pcsp It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
e5e1d3cb20034a3cbcfff1f0bae12201aa2ce17e |
|
07-May-2008 |
Stas Sergeev <stsp@aknet.ru> |
pcspkr: fix dependancies fix pcspkr dependancies: make the pcspkr platform drivers to depend on a platform device, and not the other way around. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> CC: Vojtech Pavlik <vojtech@suse.cz> CC: Michael Opdenacker <michael-lists@free-electrons.com> [fixed for 2.6.26-rc1 by tiwai] Signed-off-by: Takashi Iwai <tiwai@suse.de>
/drivers/input/misc/Kconfig
|
5bae4199522c56110d33e6fd925c052bc5ae36a1 |
|
23-Apr-2008 |
Stas Sergeev <stsp@aknet.ru> |
pcsp - Don't build pcspkr when snd-pcsp is enabled - Update CREDITS with the pc-speaker driver authors. - Prevent pcspkr from being built together with snd-pcsp. Both pcspkr and snd-pcsp use the same platform driver name "pcspkr". Signed-off-by: Stas Sergeev <stsp@aknet.ru>
/drivers/input/misc/Kconfig
|
1913130553aa231644eb4e955b1a2c533fe33d17 |
|
04-Mar-2008 |
Randy Dunlap <randy.dunlap@oracle.com> |
input: add I2C to config since the driver makes several i2c*() calls Add to help text that the Intel I2C ICH (i801) driver is also needed for this kernel. Add LEDS_CLASS to config since the driver makes les_classdev_*() calls: ERROR: "led_classdev_register" [drivers/input/misc/apanel.ko] undefined! ERROR: "__led_classdev_unregister" [drivers/input/misc/apanel.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/misc/Kconfig
|
52fe0cdb090a344cad9d95461ad06239e0c28712 |
|
14-Dec-2007 |
Stephen Hemminger <shemminger@linux-foundation.org> |
Input: add driver for Fujitsu application buttons This driver supports the application buttons on some Fujitsu Lifebook laptops. It is based on the earlier apanel driver done by Jochen Eisenger, but with many changes. The original driver used ioctl's and a separate user space program (see http://apanel.sourceforge.net). This driver hooks into the input subsystem so that the normal keys act as expected without a daemon. In addition to buttons, the Mail Led is handled via LEDs class device. The driver now supports redefinable keymaps and no longer has to have a DMI table for all Fujitsu laptops. I thought about mixing this driver should be integrated into the Fujitsu laptop extras driver that handles backlight, but rejected the idea because it wasn't clear if all the Fujitsu laptops supported both. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
01dd2fbf0da4019c380b6ca22a074538fb31db5a |
|
20-Oct-2007 |
Matt LaPlante <kernel1@cyberdogtech.com> |
typo fixes Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
/drivers/input/misc/Kconfig
|
247537b9a270b52cc0375adcb0fb2605a160cba5 |
|
26-Sep-2007 |
Adrian Bunk <bunk@kernel.org> |
kconfig: syntax cleanup - drop support for "depends/requires/def_boolean" Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
/drivers/input/misc/Kconfig
|
928923c76b393e38e5ba1d47e843e208ceef6cf9 |
|
22-Aug-2007 |
Geert Uytterhoeven <geert@linux-m68k.org> |
Introduce CONFIG_CHECK_SIGNATURE Introduce CONFIG_CHECK_SIGNATURE to control inclusion of check_signature() and avoid problems on platforms that don't have readb(). Let the few legacy (ISA || PCI || X86) drivers that need check_signature() select CONFIG_CHECK_SIGNATURE. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/misc/Kconfig
|
c2554c91425a86e5d0409a76b7ddcb328362f08b |
|
23-May-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: wistron - convert to use input-polldev Switch to using input-polldev skeleton instead of implementing polling loop by itself. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
389679d8faa38bb6d069d9e1805f15e3cb9a6d7f |
|
21-May-2007 |
Eric Piel <eric.piel@tremplin-utc.net> |
Input: wistron - add LED support Add support to wistron_btns for leds that come with the multimedia keys. Mail and wifi leds are supported, on laptops which have them. Depending on the laptop, wifi subsystem may control just the led, or both the led and the wifi card. Wifi led interface is activated only for the former type of laptops, as the latter type is already managed. Leds are controled by the interface in /sys/class/leds. Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
eedab661a51966c454e38c17266a531aa58b4a98 |
|
13-Jun-2007 |
Linus Torvalds <torvalds@woody.linux-foundation.org> |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: move input-polldev to drivers/input Input: i8042 - add ULI EV4873 to noloop list Input: i8042 - add ASUS P65UP5 to the noloop list Input: usbtouchscreen - fix fallout caused by move from drivers/usb
|
893e7c2db05f14032f2390ef7c59a499fc25ccae |
|
13-Jun-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: move input-polldev to drivers/input To work around deficiences in Kconfig that allows to "select" a symbol without automatically selecting all dependencies for that symbol move input-polldev from drivers/input/misc to drivers/input thus removing extra dependency on CONFIG_INPUT_MISC. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
7a86edef395576f69d2513c62aea7c966043bc8d |
|
15-May-2007 |
Al Viro <viro@ftp.linux.org.uk> |
missing dependencies for USB drivers in input stuff that does select USB should depend on USB_ARCH_HAS_HCD, or we'll end up with unbuildable configs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/input/misc/Kconfig
|
ba0acb5ee318901646f82c134cca2e4de0c43934 |
|
07-May-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: move USB miscellaneous devices under drivers/input/misc This will allow concentrating all input devices in one place in {menu|x|q}config. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/input/misc/Kconfig
|
3d29cdff999c37b3876082278a8134a0642a02cd |
|
30-Apr-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: cobalt_btns - convert to use polldev library Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
/drivers/input/misc/Kconfig
|
0dcd8073673115eeb67343787f244905f62532f2 |
|
30-Apr-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: add skeleton for simple polled devices input-polldev provides a skeleton for supporting simple input devices that need to be periodically scanned or polled to detect changes in their state. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
bebb8a2bc180a4c920c57e89b2d713a34c1d096c |
|
18-Feb-2007 |
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> |
Input: add driver for MIPS Cobalt back panel buttons Tested on Cobalt Qube2. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
31ea7ff0f880dc3f4ad94e85c1432d4b910c9fca |
|
10-Feb-2007 |
Jaya Kumar <jayakumar.acpi@gmail.com> |
Input: add Atlas button driver This patch adds support for the buttons on the Atlas wallmount touchscreen. Signed-off-by: Jaya Kumar <jayakumar.acpi@gmail.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
da96d0b58adddf3bdeaa9644ac74f0dcc9039407 |
|
09-Oct-2006 |
Geert Uytterhoeven <geert@linux-m68k.org> |
[PATCH] m68k/HP300: Enable HIL configuration options Enable HIL configuration options on HP300 Signed-off-by: Kars de Jong <jongk@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
/drivers/input/misc/Kconfig
|
a2bd4fd17926d715a470fbe0ebe05128ba410984 |
|
23-Jun-2006 |
David S. Miller <davem@sunset.davemloft.net> |
[SPARC64]: Add of_device layer and make ebus/isa use it. Sparcspkr and power drivers are converted, to make sure it works. Eventually the SBUS device layer will use this as a sub-class. I really cannot cut loose on that bit until sparc32 is given the same infrastructure. Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/input/misc/Kconfig
|
01387959022def72f95f4bc1341aa69e32a06b30 |
|
30-Jan-2006 |
Alessandro Zummo <alessandro.zummo@towertech.it> |
Input: add ixp4xx beeper driver This is a driver for beeper found in LinkSys NSLU2 boxes. It should work on any ixp4xx based platform. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
0b57ee9e55373a27e45549e82b0c43621480a71b |
|
23-Dec-2005 |
Adrian Bunk <bunk@stusta.de> |
[SPARC]: introduce a SPARC Kconfig symbol Introduce a Kconfig symbol SPARC that is defined on both the sparc and sparc64 architectures. This symbol makes some dependencies more readable. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/input/misc/Kconfig
|
e9fb028ea2a0a70dad0f467410418e5ee2af811b |
|
20-Nov-2005 |
Andrew Morton <akpm@osdl.org> |
Input: wistron - disable for x86_64 On x86_64: {standard input}:233: Error: suffix or operands invalid for `push' {standard input}:233: Error: suffix or operands invalid for `pop' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
5fc1468029e2a4da90ded1e0e2cdd94fbdf83bac |
|
20-Nov-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: add Wistron driver A driver for laptop buttons using an x86 BIOS interface that is apparently used on quite a few laptops and seems to be originating from Wistron. This driver currently "knows" only about Fujitsu-Siemens Amilo Pro V2000 (i.e. it can detect the laptop using DMI and it contains the keycode->key meaning mapping for this laptop) and Xeron SonicPro X 155G (probably can't be reliably autodetected, requires a module parameter), adding other laptops should be easy. In addition to reporting button presses to the input layer the driver also allows enabling/disabling the embedded wireless NIC (using the "Wifi" button); this is done using the same BIOS interface, so it seems only logical to keep the implementation together. Any flexibility possibly gained by allowing users to remap the function of the "Wifi" button is IMHO not worth it when weighted against the necessity to run an user-space daemon to convert button presses to wifi state changes. Signed-off-by: Miloslav Trmac <mitr@volny.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
/drivers/input/misc/Kconfig
|
0d078f6f96809c95c69b99d6605a502b0ac63d3d |
|
30-Oct-2005 |
Brian Gerst <bgerst@didntduck.org> |
[PATCH] CONFIG_IA32 Add CONFIG_X86_32 for i386. This allows selecting options that only apply to 32-bit systems. (X86 && !X86_64) becomes X86_32 (X86 || X86_64) becomes X86 Signed-off-by: Brian Gerst <bgerst@didntduck.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
/drivers/input/misc/Kconfig
|
1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
/drivers/input/misc/Kconfig
|