| 271ddbf702c3a4e6b18f6464180eda0f62efd9a5 |
|
09-Apr-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
V4L/DVB (7514): media/dvb/frontends replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 7bff4b4d3ad2b9ff42b4087f409076035af1d165 |
|
22-Apr-2008 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
V4L/DVB (7393): tda827x: fixed support of tuners with LNA
Tuner refactoring broke support of tuners with LNA configurations 1 and 2
for both, analog TV and DVB-T.
Additionally, this patch initializes the saa713x gpios defined by the gpiomask
at driver init to avoid undefined stated at dvb.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 08cdf94c076121cd0214ef9ea18ae3fbb9ace684 |
|
18-Mar-2007 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
V4L/DVB (5458): Tda1004x: add ts_mode option to config struct
The struct tda1004x_config has a new entry: .ts_mode
Possible values are TDA10046_TS_PARALLEL or TDA10046_TS_SERIAL
There always is only one interface active, default is parallel.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 8ce47dad8e2b9fcb899a67e6537337fa9c18c1f5 |
|
27-Apr-2007 |
Michael Krufky <mkrufky@linuxtv.org> |
V4L/DVB (5317): Create tda827x dvb tuner module
The patch moves the tda827x dvb tuning code to a separate module
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 1bb0e8667fab773d6c5a3d7caf506001deaeb7f5 |
|
27-Apr-2007 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
V4L/DVB (5311): Tda1004x driver updates
There are the following changes:
- separate configuration of IF and GPIOs.
- set GPIOs before firmware load. This helps to avoid I2C address
collisions.
- if desired invert GPIOs at sleep (automatic return to analog mode of card).
- added 3 tuner configuration bytes to config stuct.
- added i2c gate address to config struct.
- moved _state struct declaration to header file to make it accessible
on board layer.
- added "conf_probed" to the state struct to allow i.e. probing for correct
tuner version.
- changed firmware load mechanism to always:
+ check if already loaded
+ try to boot from eeprom
+ try downlad from host
- corrected name of tda10046 firmware image (backward compatible).
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 550a9a5e5f8086ae410832f134a5d80b9bd7fdb6 |
|
16-Nov-2006 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
V4L/DVB (4835): Added support for the Terratec Cinergy HT PCMCIA module
This is a hybrid cardbus module. Besides the card support, i
modified the definition names for AGC and GPIO of the tda10046.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| c5dec9fb248e3318f30a26f9984b3b064053a77f |
|
14-Oct-2006 |
Trent Piepho <xyzzy@speakeasy.org> |
V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel
When a front-end is disabled, card drivers that use it are compiled with
a stub version of the front-end's attach function. This way they have no
references to the front-end's code and don't need it to be loaded.
If a card driver is compiled into the kernel, and a front-end is a
module, then that front-end is effectively disabled wrt the card driver.
In this case, the card driver should get the stub version. This was not
happening.
The stub vs real attach function selection is changed so that when the
front-end is a module the real attach function is only used if the card
driver is a module as well. This means a module front-end will be
supported by card drivers that are modules and not supported by card
drivers compiled into the kernel.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 102a342bb9672f67a34fd185803aaded4ce8dd0f |
|
08-Aug-2006 |
Andrew de Quincey <adq_dvb@lidskialf.net> |
V4L/DVB (4387): Add Kconfig infrastructure for dvb_attach
Allow it to be en/disabled
Disable it in < 2.6.17 due to symbol_xxx() bug
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| c10d14d62d7b7596fd5c7bb8aad3f2b56f8640e6 |
|
08-Aug-2006 |
Andrew de Quincey <adq_dvb@lidskialf.net> |
V4L/DVB (4384): Remove remaining static function calls
Rewrote _write() calls to use write() op.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 74349bef1a5b5a287721a42bec08c226b095e8b0 |
|
18-Apr-2006 |
Andrew de Quincey <adq_dvb@lidskialf.net> |
V4L/DVB (3858): Convert tda1004x to refactored tuner code
Convert to tuner_ops calls.
Remove pll function pointers from structure.
Remove unneeded tuner calls.
Add i2c gate control function.
Remove europa specific hack (moved into appropriate card driver)
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| 0eb3de20a1cec67547951cebc4fcddc701e7428b |
|
07-Feb-2006 |
Hartmut Hackmann <hartmut.hackmann@t\-online.de> |
V4L/DVB (3304): TDA10046 Driver update
- Set outputs to tristate in sleep mode
- Reduce dangerously high firmware download speed with 16MHz xtal
- added tda827x configuration with GPIOs low
- added comments to stupid looking IIC reads that work around bugs in
the tda10046.
- some minor updates
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
| f03cbea36ab9412dcea58e953be4933b36c9b7be |
|
08-Jul-2005 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
[PATCH] dvb: frontend: tda1004x: support tda827x tuners
o added preliminary support for tda827x tuners
o set parameters for drift compensation to 0
makes no sense for DVB-T but can prevent lock
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| ecb60deb9d5bbcbab6c87ee5fde6f8368197fcac |
|
08-Jul-2005 |
Hartmut Hackmann <hartmut.hackmann@t-online.de> |
[PATCH] dvb: frontend: tda1004x update
o added config options for IF frequency and AGC
o support DSP boot from on board eeprom
o added pll sleep call
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 1dfb800f9d0391dee86d692142745415f5f65f81 |
|
17-May-2005 |
Johannes Stezenbach <js@linuxtv.org> |
[PATCH] dvb: tda1004x: allow N_I2C to be overridden by the card driver
allow N_I2C to be overridden by the card driver (Andreas Oberritter)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| dd102c752c17636b2aec7977b377c41156ed19c1 |
|
17-May-2005 |
Johannes Stezenbach <js@linuxtv.org> |
[PATCH] dvb: tda1004x: dont use bitfields
use simple u8 instead of bitfields (Andreas Oberritter)
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|