| 990862a2f024296f27460306393de8f0cdab8997 |
|
10-Jan-2012 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] cx231xx: fix device disconnect checks
The driver were using DEV_MISCONFIGURED on some places, and
DEV_DISCONNECTED on others. In a matter of fact, DEV_MISCONFIGURED
were set only during the usb disconnect callback, with
was confusing.
Also, the alsa driver never checks if the device is present,
before doing some dangerous things.
Remove DEV_MISCONFIGURED, replacing it by DEV_DISCONNECTED.
Also, fixes the other usecases for DEV_DISCONNECTED.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| eeaaf817c7202b71a6e1aab87ebd538d1b5e5a42 |
|
12-Apr-2011 |
Márcio Alves <froooozen@gmail.com> |
[media] cx231xx: add support for Kworld
[mchehab@redhat.com: avoided board renumberation, removed an unused #define
and re-used the existing mb86a20s dvb attach code]
Signed-off-by: Márcio A Alves <froooozen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| e95342f168f7a02441cec51b222bb7ae62df364d |
|
06-Jan-2011 |
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> |
[media] DVB: cx231xx drivers does not use dummy frontend anymore
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 7572f9c5575c721f43b575a71fda1ecd896e0327 |
|
03-Oct-2010 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] mb86a20s: add support for serial streams
By comparing the traffic between Pixelview (cx23102-based and Kworld
(saa7134-based), the only difference is at register 0xd5. After some
tests, It seems that it is used to change mode between serial and parallel.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| ede676c72d0b18f1c15300f7874370e771489a1c |
|
28-Sep-2010 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] add digital support for PV SBTVD hybrid
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| a6f6fb9c86aa202cbc04796efe9187b698b9b225 |
|
27-Sep-2010 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] cx231xx: better handle the master port enable command
Improves the logic, for it to be clearer and to avoid having
board-dependent config there.
Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 1a4aa920d0b49af2c0d9bbedb3bb75be4e174218 |
|
27-Sep-2010 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
[media] cx231xx: properly use the right tuner i2c address
The driver has a field to indicate what bus is used by tuner and
by demod. However, this field were never used. On Pixelview,
it uses I2C 2 for tuner, instead of I2C 1.
drivers/media/video/cx231xx/cx231xx-cards.c
Acked-by: Sri Deevi <Srinivasa.Deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 2bfcc0611d1b53cf5ce2079b1f1a90bb769a9ea9 |
|
08-Jul-2010 |
Devin Heitmueller <dheitmueller@hauppauge.com> |
[media] cx231xx-dvb: remove unused variable
Get rid of warning about unused variable
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 761f6cf6425e8024b983ddfa905a4c0002718fbe |
|
07-Jul-2010 |
Devin Heitmueller <dheitmueller@hauppauge.com> |
[media] cx231xx: fix race condition in DVB initialization
Fix case where analog calls come in while the DVB side of the board is still
initializing. This patch is actually just an exact port of the same patch
made by Mauro to em28xx in hg rev 14762.
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 1a50fddefd17ec1359d08cd23c77da42fabbb4a7 |
|
06-Jul-2010 |
Michael Krufky <mkrufky@kernellabs.com> |
[media] cx231xx: add support for Hauppauge EXETER
Add support for various Hauppauge EXETER designs.
Note by DJH: fixed a few minor 'make checkpatch' warnings before commit.
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 64fbf44455260684fa5bfdd3121af3d0ef0b48dd |
|
06-Jul-2010 |
Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com> |
[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER
Added support for new cx231xx boards - Carraera, Shelby, RDx_253S and
VIDEO_GRABBER.
[mchehab@redhat.com: Fix a merge conflict with BKL removal patches]
Signed-off-by: Palash Bandyopadhyay <palash.bandyopadhyay@conexant.com>
Signed-off-by: Devin Heitmueller <dheitmueller@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
| d5abcc784ff337fbe9c6bc03235baecfd25191e5 |
|
16-Jan-2010 |
Márton Németh <nm127@freemail.hu> |
V4L/DVB: cx231xx: cleanup dvb_attach() return value handling
Remove the following sparse error (see "make C=1"):
* error: incompatible types for operation (<)
left side has type struct dvb_frontend *
right side has type int
Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| b9255176453086b2531c5559350bd5c92b771cc5 |
|
04-Mar-2009 |
Sri Deevi <Srinivasa.Deevi@conexant.com> |
V4L/DVB (10957): cx231xx: Fix CodingStyle
Fixes several CodingStyle issues on the driver.
Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| 84b5dbf39ed2f51224841bbbf08439158d69d427 |
|
03-Mar-2009 |
Mauro Carvalho Chehab <mchehab@redhat.com> |
V4L/DVB (10955): cx231xx: CodingStyle automatic fixes with Lindent
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
| e0d3bafd02586cfde286c320f56906fd9fa8d256 |
|
03-Mar-2009 |
Sri Deevi <Srinivasa.Deevi@conexant.com> |
V4L/DVB (10954): Add cx231xx USB driver
Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com>
[mchehab@redhat.com: Remove the Kconfig changes, to avoid git breakages]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|