| 85d37226fb5faaf7bec55df50c2cd029bd6bb3cd |
|
18-Nov-2011 |
Chandrakala Chavva <cchavva@caviumnetworks.com> |
[SCSI] mptsas: Add device ID for SAS1068_820XELP.
Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: "Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 98cbe371fd373f13806595835b79da07f3a2f934 |
|
05-Aug-2011 |
kashyap.desai@lsi.com <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Fix for device offline while doing aggressive HBA reset
[Resend patch as per Bernd Schubert comment ]
Issue:
Device goes offline while doing aggressive HBA reset
along with IO using some utility.
Root cause:
FW goes into bad state due to aggressive reset. Softreset does not
help to recover FW. And also aggressive reset open up the window for
Error handling thread to kicked off at the same time HBA will be in
constant RESET loop as part of aggressive reset test case can lead
Device to goes offline.
Changes:
1. Added extra check as below inside eh_timed_out call back as below.
if(ioc->ioc_reset_in_progress) Rc = EH_TIMER_RESET
2. Removed " DOORBELL_ACTIVE" check for SAS controller from task
management context. Since SAS controller uses high priority queue
for task management. This check is not required for SAS controller.
3. Moved SoftReset call to HardReset from Task Mgmt context.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| a38ae37fdcd77657fb6624b0a0ec57f3d21e2f40 |
|
04-Aug-2011 |
kashyap.desai@lsi.com <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Avoid out of order Event processing due to cpu migration
Driver will now schedule MPI event using "delay_work_queue_on" to
specify same CPU to be used to schedule work. Earlier it used
"delay_work_queue" which can cause migration of work due to kernel'
timer migration feature.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| e62cca19a9bbfc72c62632d95a7c01cd6476708c |
|
04-Aug-2011 |
kashyap.desai@lsi.com <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Better handling of DEAD IOC PCI-E Link down error condition
Find Non-Operation IOC and remove it from OS: Detecting
dead(non-functional) ioc will be done reading doorbell register value
from fault reset thread, which has been called from work thread
context after each specific interval. If doorbell value is 0xFFFFFFFF,
it will be considered as IOC is non-operational and marked as dead
ioc.
Once Dead IOC has been detected, it will be removed at pci layer using
"pci_remove_bus_device" API.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 3850b14e51d32fc0d4297ceb30f3f7bb2c2b4779 |
|
04-Aug-2011 |
kashyap.desai@lsi.com <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Set max sector count module parameter
The max_sector setting is currently hard-coded in the driver to 8192
sectors (4MB transfers). Using new module parameter, if max_sectors is
specified at load time, the default of 8192 will be overridden.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
| 72ef0e5757c160fc627d2c89b6379bc102ccab5c |
|
02-May-2011 |
Borislav Petkov <borislav.petkov@amd.com> |
[SCSI] mptsas: Fix annoying warning
Shut up
drivers/message/fusion/mptsas.c: In function 'mptsas_event_process':
drivers/message/fusion/mptsas.c:5015: warning: unused variable 'log_info'
for configs with CONFIG_SCSI_MPT2SAS_LOGGING unset.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 25985edcedea6396277003854657b5f3cb31a628 |
|
31-Mar-2011 |
Lucas De Marchi <lucas.demarchi@profusion.mobi> |
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
|
| 3487735aa54407565278a5a1288119c45210b86c |
|
10-Feb-2011 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Remove bus reset for mptsas module
Bus reset is not required for SAS Controller. It is valid for mptspi
and mptfc, but for mptsas it is not required. It is an extra work for
Error handling escallation for mptsas. Removing bus reset from error
handling will eventually speedup Error handling for SAS controller.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| d75733d51fdab5c99a0d9491b25f22e13b39cdc1 |
|
10-Feb-2011 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Support SAS2.0 Devices with SAS1.0 Controllers
SAS1.0 Controller was not able to detect SAS2.0 Expanders due to Link
RATE detection was limited to 1.5 Gbps and 3.0 Gbps for SAS1
controllers. Added detection for 6.0 Gbps link. Now, user can mix-up
6.0 Gpbs links with SAS1.0 controller.
e.g SAS1.0 HBA <----> SAS2.0 Expander <------> SAS2.0 Expander <--------> SAS1.0 Drive.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| f281233d3eba15fb225d21ae2e228fd4553d824a |
|
16-Nov-2010 |
Jeff Garzik <jeff@garzik.org> |
SCSI host lock push-down
Move the mid-layer's ->queuecommand() invocation from being locked
with the host lock to being unlocked to facilitate speeding up the
critical path for drivers who don't need this lock taken anyway.
The patch below presents a simple SCSI host lock push-down as an
equivalent transformation. No locking or other behavior should change
with this patch. All existing bugs and locking orders are preserved.
Additionally, add one parameter to queuecommand,
struct Scsi_Host *
and remove one parameter from queuecommand,
void (*done)(struct scsi_cmnd *)
Scsi_Host* is a convenient pointer that most host drivers need anyway,
and 'done' is redundant to struct scsi_cmnd->scsi_done.
Minimal code disturbance was attempted with this change. Most drivers
needed only two one-line modifications for their host lock push-down.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| b595076a180a56d1bb170e6eceda6eb9d76f4cd3 |
|
01-Nov-2010 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
| 213aaca3e5727f3eb56002b04a1405db34a54ed8 |
|
26-Jul-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Extra debug prints added relavent to Device missing delay error handling
Adding function name in original debug prints and few more debug prints are
added.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| c9de7dc48307395fb71780b567ae8833b080d1c8 |
|
26-Jul-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Block Error handling for deleting devices or Device in DMD
Issue description:
In multipath topology, when device deletion is in transient state,
multipath driver can call blk_flush_queue() as part of path failure.
Before device get deleted from OS, Device may go OFFLINE as part of error
handling kicked off triggered from multipathing driver. Above condition hits
more frequently if device missing delay timer (which is LSI specific firmware
parameter) is non zero value.
root cause of this issue is Error handling thread is getting kicked off for
device which is not really present(in transient state of deleting).
This patch has solution for this issue. driver is now using eh_timed_out
callback. See below.
mptsas_transport_template->eh_timed_out = mptsas_eh_timed_out
Using mptsas_eh_timed_out function, driver can decide weather vdevice is
under Device missing delay or deleting state.
for either of those cases, there is BLK_EH_RESET_TIMER return to scsi mid
and error handling thread will not be kicked off for that particular scsi
command.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 97009a29e8c999def2d1e9ef253c226daf9541af |
|
22-Jun-2010 |
Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> |
[SCSI] mptfusion: print Doorbell register in a case of hard reset and timeout
Printing Doorbell register in a case of hard reset and timeout
should be useful for figuring out the state of the system.
Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 3e84beba608dee5a7c7711a3503eb2f335c78fca |
|
07-Apr-2010 |
Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com> |
[SCSI] mptsas: fixed hot-removal processing
This patch fixes mptsas disk hot-removal processing. The
hot-removal processing doesn't complete because of this condition.
drivers/message/fusion/mptsas.c:
mptsas_taskmgmt_complete()
if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
mptsas_queue_device_delete(...);
mptsas_queue_device_delete(), which must be called for
hot-removal, never gets called because mptsas_find_vtarget()
always returns 0 here. At that time, the vtarget has already
been freed in mptsas_target_destroy(), and also the scsi_device
has been marked as SDEV_DEL.
As a result of the issue, port deletion functions won't get
called and the device ends up being in an incomplete state.
(Some data structures and sysfs entries, which should be
removed in hot-removal, remain.) One side effect of this is
that a hot-addition of the device (bringing the device back
on) fails.
This patch just removes mptsas_find_vtarget() from the if-state
condition.
Signed-off-by: Kei Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| cc7e9f5f9999d9c015686ab4a622e1fb529391eb |
|
17-Jun-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Added code for occationally SATA hotplug failure.
Issue: SATA hotplug does not work sometimes.
At the time of ADD device/ADD phys disk, drive may fail to add SATA device
due to temporary SAS Address for SATA device generated by firmware. Final
SAS address for SATA driver will be generated only after disk spinup is
done. This may take some times for slow spining SATA drives.
At phy link up driver gets attached device sas address and stores into
phyinfo. At the time of ADD event driver will read sas device page0 using
channel and FW ID provided in ADD Device event. Here in case of SATA drives,
driver will see miss match in phyinfo->sas_address and latest sas address
read from SAS DEVICE PAGE0 and eventually device won't be added to OS.
Fix:
When Driver read SAS DEVICE PAGE0, it can identify Device type looking at
device_info. If device is SATA drive and sas address mismatch happens,
Driver will do same stuffs which happened at the time of LINK UP to get
correct piece of information from Pages. ( Find parent device and refresh
parent device phys either HBA refresh/Exp refresh)
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| b68bf096d4211bb6490955f86842d8291e8ae218 |
|
17-Jun-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: schedule_target_reset from all Reset context
Issue:
target reset will be queued to driver's internal queue to get schedule
later. When driver add target into internal target_reset queue we will block IOs
on those target using scsi midlayer API. Now due to some cause driver is not
executing those target_reset list and it is always in block state.
Changes:
now we are clearing target_reset queue from all other Callback context
instead of only DeviceReset context.Now wherever driver is clearing
taskmgmt_in_progress flag it is considering target_reset queue cleanup
also.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 51106ab5306b752cd53d40626f78774276bb1368 |
|
17-Jun-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Added sanity to check B_T mapping for device before adding to OS
Added sanity check before treating any device is a valid device.
It is possible that firmware can have device page0 in its table, but that
devicemay not be available in topology. Device will be available in topology
only if there is Bus Target mapping is done in firmware. Driver will always
check B_T mapping of firmware before reporting device to upper layer.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| aca794ddd688f1bbb7551f569b0620255c052d80 |
|
17-Jun-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Corrected declaration of device_missing_delay
device missing delay is 8 bit value in io unit pg1. Making correct variable
declaration for device_missing_delay.
The driver is storing the calculated device missing delay in IOC structure
as a u8 instead of a u16. It needs to be a u16 if the delay is > 255.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 0cf0f23c286459625eb5cbf9934135ff3156ce95 |
|
18-Mar-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Proper error handling is added after mpt_config timeout
Added proper error handling after mpt_config.
Now check of MPI_IOCSTATUS_CONFIG_INVALID_PAGE is added.
If error is MPI_IOCSTATUS_CONFIG_INVALID_PAGE, driver will return -ENODEV.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 568da76929392c9feb60a25383250dd6cfa68e05 |
|
18-Mar-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Check for command status is added after completion.
1) Corrected name string as "MPT SAS HOST"
2) Added proper check conditions for MPT_MGMT_STATUS_COMMAND_GOOD.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| ffb7fef32b98fff773a5a6882ae4f8aee65a7708 |
|
18-Mar-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Proper bus_type check is added
Added proper bus_type check before processing event/ reset handler.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 48959f1eae3068fefb3de05cdc0c2bd8f0f96c37 |
|
18-Mar-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: mpt_detach is called properly at the time of rmmod
Current design of mptsas is as follow.
MPTSAS will do probe() if pci id matches for available card in
system, irrespective of mode of controller. If controller is I/T mode
or I mode, things are fine. If controller is only in T mode, mptsas is
not doing complete process of mptsas_probe(). It will only make
sure IOC structure is created and IOC reference is available for
mptstm driver. Now While removing module we should take care
case of Target mode only mptsas. If we are removing IOC which is
only in Target mode, We should only detach IOC instead of
following rest of the cleanup process which is only required for T
mode controller. Now For T mode controller, only part clean up is
done instead of complete cleanup. mpt_detach will call early in case
of Target mode only controller.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| d0f698c46141e1d179fb3a86a0ae668d2fd12916 |
|
18-Mar-2010 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Added new less expensive RESET (Message Unit Reset)
Message Unit Reset - instructs the IOC to reset the Reply Post and
Free FIFO's. All the Message Frames on Reply Free FIFO are
discarded. All posted buffers are freed, and event notification is
turned off. IOC doesnt reply to any outstanding request. This will
transfer IOC to READY state. Message unit ready is less expensive
operations than Hard Reset. soft reset will not force Firmware to
reload again, it only do clean up of Message units.
mpt_Soft_Hard_ResetHandler will first try for Soft Reset,if
it fails then go for big hammer reset which is Hard Reset.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
| 64e155adc250ab68255b761c1faa77799aa1e41a |
|
16-Dec-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: block device when target is being removed by FW
Add support to set the sdev state to SDEV_BLOCK during device removal
to stop IOs comming to the deleting driver immediately.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| e0f553ab58f478321717100e44b28f765bd2a045 |
|
16-Dec-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptfusion: Added sysfs expander manufacture information at the time of expander add.
Added new function mptsas_exp_manufacture_info, which will
obtain the REPORT_MANUFACTURING, and fill the details into the
sas_expander_device object when the expander port is created.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 9766096d331c82e71d3c9df61f1c88eff6ad916b |
|
02-Sep-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : FW event thread and scsi mid layer deadlock in SYNCHRONIZE CACHE command
Normally In HBA reset path MPT driver will flush existing work in current work
queue (mpt/0) . This is just a dummy activity for MPT driver point of
view, since HBA reset will turn off Work queue events.
It means we will simply returns from work queue without doing anything.
But for the case where Work is already done (half the way), we have to have
that work to be done.
Considering above condition we stuck forever since Deadlock in scsi midlayer
and MPT driver. sd_sync_cache() will wait forever since HBA is not in
Running state, and it will never come into Running state since
sd_sync_cache() is called from HBA reset context.
Now new code will not wait for half cooked work to be finished
before returning from HBA reset.
Once we are out of HBA reset, EH thread will change host state to running from
recovery and work waiting for running state of HBA will be finished.
New code is turning ON firmware event from another special work called
Rescan toplogy.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| f44fd18198eb26b62ba86b17016e9441ce95fc71 |
|
02-Sep-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : NULL pointer on big endian systems causing Expander not to tear off
On Big endian system kernel will crash due to address translation
is not handle properly.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 9e39089b958818c8f3d772414cd27f84fb2622f2 |
|
02-Sep-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : Sanity check for phyinfo is added
Check for phyinfo->phy before calling sas_port_delete_phy.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 79a3ec1ace2329d115ecd2445379b46aed3286b0 |
|
04-Aug-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : set max_id to infinite value.
Do not set max_id value received from FW. Once SAS transport layer is
introduced max_id value is missleading to SCSI mid layer. Use max_id to
infinite value.
logic of can queue of scsi host is changed.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 4b97650b555b1cd09b547104d98da0ff700187d9 |
|
04-Aug-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : Change config request timeout value to 30 seconds.
Change config request timeout value to 30 seconds.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| a247fa4521ccec7cb82a9f2d4e8544fce27ea109 |
|
04-Aug-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : Removed mptscsih_timer_expired.
Removed mptscsih_timer_expired. This timer is no more use.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 9d2e9d66a3f032667934144cd61c396ba49f090d |
|
04-Aug-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mptsas : Change DEFINED value of can queue for FC and SAS devices.
Change DEFINED value of can queue for FC and SAS devices.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
|
| 129dd98194747a3b8ac1ff876d8d1f2440660d01 |
|
21-Jun-2009 |
Jiri Slaby <jirislaby@gmail.com> |
fusion: mptsas, fix lock imbalance
Fix two typos in mptsas_not_responding_devices. It was mutex_lock instead
of unlock.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| fc847ab4318cd6ab6c231739ad51d2502d19a87a |
|
10-Jun-2009 |
James Bottomley <James.Bottomley@HansenPartnership.com> |
[SCSI] mpt fusion: fix up doc book comments
Several of the doc book in the previous patches had incorrect multi-line short
function descriptors. Fixed it all to be the correct single line descriptor.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| db7051b2984d2c7d44b6178ad4c523500dff7f7c |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Added support for Broadcast primitives Event handling
Firmware is able to handle Broadcast primitives, but upstream driver does not
have support for broadcast primitive handling. Now this patch is mainly to
support broadcast primitives.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 57e985136bfafdfcd72c4c7d91115955d225677e |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Queue full event handling
FW will report Queue full event to Driver and driver will handle this queue
full event to SCSI Mid layer.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| a7938b0bb3b458fe0723608be3db6c4ed8d79a8c |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: RAID device handling and Dual port Raid support is added
1. Handle integrated Raid device(Add/Delete) and error condition and check
related to Raid device. is_logical_volume will represent logical volume
device.
2. Raid device dual port support is added. Main functions to support this
feature are mpt_raid_phys_disk_get_num_paths and mpt_raid_phys_disk_pg1.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 2f187862e579f1f5e883188cab6bd867cb60387f |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Code Cleanup patch
Resending patch considering Grants G's code review.
Main goal to submit this patch is code cleaup.
1. Better driver debug prints and code indentation.
2. fault_reset_work_lock is not used anywhere. driver is using taskmgmt_lock
instead of fault_reset_work_lock.
3. setting pci_set_drvdata properly.
4. Ingore config request when IOC is in reset state.( ioc_reset_in_progress
is set).
5. Init/clear managment frame proprely.(INITIALIZE_MGMT_STATUS and
CLEAR_MGMT_STATUS)
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| eedf92b99806aeff18dc21c9dfb28999ce374413 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Rescan SAS topology added
1.) SAS topology Rescan is added. If Firmware is doing Reset and we get
Device add interrupt from Firmware, we will not receive it as part of Reset
is going ON. After Reset we will do special Rescan of SAS topology.
2.) Driver version changed from 3.04.08 to 3.04.09.
Added proper lock/unlock in mptsas_not_responding_devices() as per James'
comment.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| f9c34022eae9c76465dc2ec8805b9905e171ef40 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: SAS topology scan changes, expander events
SAS topology scan is restructured. HBA firmware is generating more
events. Expander Events are added, Link status events are also added with
respect to SAS topology scan optimization.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 3eb0822c6740c5564c37a2fe56449cdb4f3d800c |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueue
Now Firmware events are handled by firmware event queue.
Previously it was handled in interrupt context/WorkQueue of Linux.
Firmware Event handling is restructured and optimized.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| ea2a788de4ce5ebab09276e25443f55592af2335 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: rewrite of ioctl_cmds internal generated function
1) rewrite of ioctl_cmds internal generated function that issue commands to
firmware, porting them to be single threaded using the generic MPT_MGMT
struct. All wait Queues are replace by completion Queue.
2) added seperate callback handler for ioctl task managment
(mptctl_taskmgmt_reply), to handle command that timeout
3) rewrite mptctl_bus_reset
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| e7deff3374cc5951f914dcb3c66bc1b8de8a084e |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Adding DeviceResetCtx for internal Device reset frame
1.) Added taskmgmt_quiesce_io flag in IOC and removed resetPending from
_MPT_SCSI_HOST struct.
2.) Reset from Scsi mid layer and internal Reset are seperate context.
Adding DeviceResetCtx for internal Device reset frame.
mptsas_taskmgmt_complete is optimized as part of implementation.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 37c60f374a855974c27bd30d5662a8fa5e933792 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: rewrite of all internal generated functions
Rewrite of all internal generated functions that issue commands to firmware,
porting them to be single threaded using the generic MPT_MGMT
struct. Implemented using completion Queue.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| f0f09d3b3f06900d64971625d6753dea0623ed45 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: config path optimized, completion queue is used
1) Previously we had mutliple #defines to use same values.
Now those #defines are optimized.
MPT_IOCTL_STATUS_* is removed and MPT_MGMT_STATUS_* are new
#defines.
2.) config path is optimized.
Instead of wait Queue and timer, using completion Q.
3.) mpt_timer_expired is not used.
[jejb: elide patch to eliminate mpt_timer_expired]
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 7b5a65b9e649dad9cf9c6d282df4162843070351 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Added support for MPT discovery completion check
sas_discovery_quiesce_io flag is used to control IO start/resume functionality.
IO will be stoped while doing discovery of topology. Once discovery is completed
It will resume IO. Resending patch including James review.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 14d0f0b063f5363984dd305a792854f9c23e9e97 |
|
29-May-2009 |
Kashyap, Desai <kashyap.desai@lsi.com> |
[SCSI] mpt fusion: Fixing 1078 data corruption issue for 36GB memory region
The reason for this change is there is a data corruption when four different
physical memory regions in the 36GB to 37GB region are
accessed. This is only affecting 1078.
The solution is we need to use different addressing when filling in
the scatter gather table for the effected memory regions. So instead
of snooping on all four different memory holes, we treat any physical
addresses in the 36GB address with the same algorithm.
The fix is explained below
1) Ensure that the message frames are NOT located in the trouble
region. There is no remapping available for message frames, they must
be allocated outside the problem region.
2) Ensure that Sense buffers are NOT in the trouble region. There is
no remapping available.
3) Walk through the SGE entries and if any are inside the trouble region
then they need to be remapped as discussed below.
1) Set the Local Address bit in the SGE Flags field.
MPI_SGE_FLAGS_LOCAL_ADDRESS
2) Ensure we are using 64-bit SGEs
3) Set MSb (Bit 63) of the 64-bit address, this will indicate buffer
location is Host Memory.
Signed-off-by: Kashyap Desai <kadesai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 5f49f63178360b07a095bd33b0d850d60edf7590 |
|
19-May-2009 |
Tejun Heo <tj@kernel.org> |
block: set rq->resid_len to blk_rq_bytes() on issue
In commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero. The conversion was done under the assumption that
when a request fails residue count wasn't defined. However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.
This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers. While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.
* ide-cd: rq->resid_len cleared on pc success
* mptsas: req->resid_len cleared on success
* sas_expander: rsp/req->resid_len cleared on success
* mpt2sas_transport: req->resid_len cleared on success
* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
advantage of initial full count to simplify code
Boaz Harrosh spotted bug in resid_len initialization. Fixed as
suggested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
| b0790410300abaaf4f25f702803beff701baebf1 |
|
07-May-2009 |
Tejun Heo <tj@kernel.org> |
block: cleanup rq->data_len usages
With recent unification of fields, it's now guaranteed that
rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct
users to accessors. IDE will be converted in a separate patch.
Boaz: spotted incorrect data_len/resid_len conversion in osd.
[ Impact: convert direct rq->data_len usages to blk_rq_bytes() ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
| c3a4d78c580de4edc9ef0f7c59812fb02ceb037f |
|
07-May-2009 |
Tejun Heo <tj@kernel.org> |
block: add rq->resid_len
rq->data_len served two purposes - the length of data buffer on issue
and the residual count on completion. This duality creates some
headaches.
First of all, block layer and low level drivers can't really determine
what rq->data_len contains while a request is executing. It could be
the total request length or it coulde be anything else one of the
lower layers is using to keep track of residual count. This
complicates things because blk_rq_bytes() and thus
[__]blk_end_request_all() relies on rq->data_len for PC commands.
Drivers which want to report residual count should first cache the
total request length, update rq->data_len and then complete the
request with the cached data length.
Secondly, it makes requests default to reporting full residual count,
ie. reporting that no data transfer occurred. The residual count is
an exception not the norm; however, the driver should clear
rq->data_len to zero to signify the normal cases while leaving it
alone means no data transfer occurred at all. This reverse default
behavior complicates code unnecessarily and renders block PC on some
drivers (ide-tape/floppy) unuseable.
This patch adds rq->resid_len which is used only for residual count.
While at it, remove now unnecessasry blk_rq_bytes() caching in
ide_pc_intr() as rq->data_len is not changed anymore.
Boaz : spotted missing conversion in osd
Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape
[ Impact: cleanup residual count handling, report 0 resid by default ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
|
| d58069adc6f59f48bf96a72e6df68a670ff1b3bc |
|
01-Apr-2009 |
Alan Cox <alan@redhat.com> |
[SCSI] mptsas: remove unneeded check
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| cadbd4a5e36dde7e6c49b587b2c419103c0b7218 |
|
04-Jul-2008 |
Harvey Harrison <harvey.harrison@gmail.com> |
[SCSI] replace __FUNCTION__ with __func__
[jejb: fixed up a ton of missed conversions.
All of you are on notice this has happened, driver trees will now
need to be rebased]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: SCSI List <linux-scsi@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| cddc0ab71194a09c0ac359be10a0f1ef976ddc95 |
|
20-May-2008 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion : Updated copyright statment with 2008 included
Updating copyright statement to include the year 2008
Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 7ba2db5f38955907e46a65c9334d287cd3da32c2 |
|
13-Mar-2008 |
Michael Reed <mdr@sgi.com> |
[SCSI] fusion mpt: fix target missing after resetting external raid
Following a hard reset of a SAS raid, one of the raid targets is occasionally
missing. I tracked this down to a pretty obscure little bug.
The LSI fusion drivers for SAS and Fibre Channel both use their respective
transport layers. Those transport layers increment the target number
assigned to new targets.
The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host
structure to avoid scanning the scsi host adapter. Both fusion drivers set
"this_id" from a value returned in a firmware PortFacts response. For my
particular test case (SAS) the firmware id assigned to the initiator was
173. After enough raid resets to cause the raid targets to go and come a
sufficient number of times, the id assigned by the transport to a raid
target would match the id assigned by the host adapter to the "this_id"
field, resulting in that target not being scanned.
Fix by not assigning this_id and not checking it in slave_configure.
Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 7748369f49d428e558c519ed344d3005d38347b7 |
|
20-Mar-2008 |
Michael Reed <mdr@sgi.com> |
[SCSI] mptsas: do not use ioc->handle to locate hba portinfo structure
While performing hardware raid reset testing via the raid's client, I
noticed that sometimes, following the reset, that there would be more
raid targets in the lsscsi output than there actually were raid
targets. I tracked this down to the following issue.
Fusion cannot always find the mptsas_portinfo structure for the hba
because it uses the handle stored in ioc->handle to locate it. The
problem is that the firmware can change the handle associated with the
hba when h/w raid is reset (via the raid client). When this happens,
the driver will allocate another mptsas_portinfo structure and link it
into the chain of said structures. This ultimately causes confusion
within the driver resulting in targets not being removed when they
should be.
Eric Moore pointed out that the hba's portinfo structure is always the
first structure on the sas_topology list. This patch modifies
mptsas.c to access the hba's portinfo structure by taking the first
structure on said list.
Signed-off-by: Michael Reed <mdr@sgi.com>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 51f39eae14b4874618e73281c236e3a1c1572d4d |
|
04-Mar-2008 |
Krzysztof Oledzki <olel@ans.pl> |
[SCSI] mpt fusion: don't oops if NumPhys==0
Don't oops if NumPhys==0, instead return -ENODEV.
This patch fixes http://bugzilla.kernel.org/show_bug.cgi?id=9909
Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| 38b3167f75c9508156b974d19692c19b78292e2e |
|
30-Dec-2007 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
[SCSI] mpt fusion: make mptsas_smp_handler update resid
This patch fixes mptsas_smp_handler to update both din_resid or
dout_resid on success. bsg can report back the residual.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
| c51d0beaaed902ef48ed1f3b1834d37b7ffd55e8 |
|
29-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: fix up fusion prints using the sdev_printk, dev_printk, and shost_printk API
Cleaning up prints that use the xxx_printk API, in that the fusion
preamble "mptbase: iocX" follows the info provided by the print API.
The way its currently coded, the [H:C:T] print in sdev_printk will be
inbetween "mptbase" and "iocX", instead of before.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e8206381f5842269691f3164ec0d79b7059bd710 |
|
29-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: lock down ScsiLookup
ScsiLookup is an array of pending scmd pointers that the scsi lld
maintains. This array is touched from queuecommand, eh threads, and
interrupt context. This array should put under locks, hence this patch
to synchronize its access. I've added some nice little function
wrappers for this, and moved the ScsiLookup array over to MPT_ADAPTER
struct.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| bc6e089a13a5c0ac36247616baecd6fc77405e7f |
|
29-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: Fix sparse warnings
List below is output from C=2 sparse compilation, which are fixed with
this patch.
1) mptspi: pg0 is defined in x86 version of include/asm/pgtable.h
2) mptsas: context imbalance in 'mptsas_probe' different lock contexts
for basic block
3) mptbase: from mpt_attach - cast adds address space to expression
4) mptbase: from mpt_do_upload - request[] is bad constant expression
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e7eae9f6e94cd49261c2997b0b4f768c1351bc02 |
|
29-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: add use of shost_priv and remove all the typecasting
The driver is currently typecasting to obtain the shost hostdata. The
driver is updated to use the shost_priv macro.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 50847ed8bc3d108d923bb8b6793f453a15af3c3f |
|
15-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: removing Dell copyright
Some other vender has concerns over this copyright, and Dell has
approved removing it.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e80b002bfd38263117da93feb4f67f5cf7d9221b |
|
15-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: removing references to hd->ioc
Cleaning up code by accesing the ioc pointer directly instead of via hd->ioc. In the future, most data members of struct MPT_SCSI_HOST will be either deleted or moved to struct MPT_ADAPTER.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| a69de507aae293e32d22e873f34f25f49b2db3b2 |
|
15-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: rename vdev to vdevice
common naming of vdevice through out driver
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 29dd3609f2fc70e02ce48123485b14d9417b834f |
|
15-Sep-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: standardize printks and debug info
Standardize all prints using common MYIOC_s_XXX_FMT macro defined in mptbase.h. Currently the driver uses several different methods to display info, where in some cases the "controller name" generating the printk is not provided.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f36789e22ac32a6554b8e4d05ab6125fc1161745 |
|
14-Aug-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: Change company name from LSI Logic to LSI
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is
a reference of LSI Logic, it is changed to LSI in mpt fusion driver
code.
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 56af97ae477cf8c2983edf86db2559d6394ca860 |
|
14-Aug-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: Creation of mptsas.h header file
The data structure definitions from mptsas.c are moved to a new header
file mptsas.h
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f606f5718fa5a36e400000f91c44a5725b0f005d |
|
14-Aug-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: Change call back indices to u8 from int
The call back index requires only u8 but in lot of places it is
referred as int, now everywhere the call back index variables are
declared as u8 with uniform name cb_idx
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 7a195f464e0692607aca8150c8489a838fab684b |
|
14-Aug-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: Usage of high priority request FIFO to send task management commands
Added support for sending the task management requests through High priority
request FIFO instead of Doorbell writes when firmware support High priority
FIFO.
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Acked-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 159e36fe996411a4a05added6b7b20b1c4490ebb |
|
30-Jul-2007 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
[SCSI] mptsas: add SMP passthrough support via bsg
This patch adds support for SAS Management Protocol (SMP) passthrough
support via bsg.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| d6ecdd638aa840604b87195f2097cabbd095092c |
|
24-Jul-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support
This patch contains changes in mptfc.c, mptlan.c, mptsas.c and mptspi.c to
support logging in MPT fusion drivers.
The changes are majorly in debug printks, the existing debugprintk are
modified accroding to new debug macros defined in the file mptbdebug.h
signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 57ce21bfccaf3b24296f1e097682177e49017a57 |
|
02-Jul-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: deregister from transport layer if PCI registration failed
The mptspi and mptsas drivers are modified to deregister from transport layer
if registration with PCI driver failed
Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| edb9068d0d7a3ba92f66b8c86cba625f3a439f64 |
|
17-Jul-2007 |
Prakash, Sathya <sathya.prakash@lsi.com> |
[SCSI] mpt fusion: add sysfs attributes to display IOC parameters
New sysfs scsi_host attributes are added to provide information about Firmware
version, BIOS version, MPI version and other product related information
signed-off-by: Sathya Praksh <sathya.prakash@lsi.com>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 16d201016a9f29e0557849907352769c63cef259 |
|
14-Jun-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] mpt fusion: update MAINTAINERS (fusion part)
Update assocated fusion sources with new support email address.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| ba76ef246090601b783c1e6190e22b8b149a105f |
|
09-Mar-2007 |
Judith Lebzelter <judith@linux-foundation.org> |
[SCSI] mptsas: Fix oops for insmod during kexec
This fix's an oops during driver load time. mptsas_probe calls
mpt_attach(over in mptbase.c). Inside that call, we read some
manufacturing config pages to setup some defaults. While reading the
config pages, the firmware doesn't complete the reply in time, and we
have a timeout. The timeout results in hardreset handler being called.
The hardreset handler calls all the fusion upper layer driver reset
callback handlers. The mptsas_ioc_reset function is the callback
handler in mptsas.c. So where I'm getting to, is mptsas_ioc_reset is
getting called before scsi_host_alloc is called, and the pointer ioc->sh
is NULL as well as the hostdata.
Signed-off-by: Judith Lebzelter <judith@osdl.org>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| cd354f1ae75e6466a7e31b727faede57a1f89ca5 |
|
14-Feb-2007 |
Tim Schmielau <tim@physik3.uni-rostock.de> |
[PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 07c861d6d9ca3dc58e225bcfe2da0f378af6fa6c |
|
29-Jan-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] fusion - bump version - 3.04.04
bump version, and fix email addr for lsi support
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 2ecce492290bf0d5eedc76cf0f4bf45f8c3f42bc |
|
29-Jan-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] fusion - report wide port sas address's for hba phys
Return proper sas address to sas transport layer for parent phys that
form a wide port. Current implementation returns a different address
for each phy, incremented by one from the base address.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| df9e062ad994c4db683377b108c0dbed4690e4b0 |
|
29-Jan-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] fusion - serialize target resets in mptsas.c
Fusion firmware requires target reset following hotplug removal event,
with purpose to flush target outstanding request in fw. Current implementation
does the target resets from delayed work tasks, that in heavy load
conditions, take too long to be invoked, resulting in command time outs
This patch will issue target reset immediately from ISR context, and will
queue remaining target resets to be issued after the previous one completes.
The delayed work tasks are spawned during the target reset completion.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| b506ade9f3c309ac2ce3ffc4039f731097506038 |
|
29-Jan-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] fusion - inactive raid support, and raid event bug fix's
inactive raid support, e.g. exposing hidden raid components
belonging to a volume that are inactive. Also misc bug fix's for
various raid asyn events.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 793955f549c710a1b0c18f823d5d710840747b15 |
|
29-Jan-2007 |
Eric Moore <eric.moore@lsi.com> |
[SCSI] fusion - Greater than 255 target and lun support
Add support for greater than 255 target and luns.
Kill the hd->Target[] field, and change all references
of bus_id/target_id, to channel/id.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 9f4203b357d46a66c042df3dedf277ccaa5e2b1d |
|
05-Jan-2007 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] fusion: MODULE_VERSION support
* Add modinfo driver version support.
* Change copyright year to 2007.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f99be43b3024f2dd054f2addd54a318eabee2018 |
|
05-Jan-2007 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] fusion: power pc and miscellaneous bug fixs
* Endian fix's for warnings found in ppc environment.
* Fix compile time warning when calling scsi_device_reprobe, where
in newer kernels this API expects its return value to be examined.
* Fix compile errors when debug messages are enabled.
Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| c4028958b6ecad064b1a6303a6a5906d4fe48d73 |
|
22-Nov-2006 |
David Howells <dhowells@redhat.com> |
WorkStruct: make allyesconfig
Fix up for make allyesconfig.
Signed-Off-By: David Howells <dhowells@redhat.com>
|
| f4ad7b5807385ad1fed0347d966e51a797cd1013 |
|
25-Aug-2006 |
James Bottomley <James.Bottomley@steeleye.com> |
[SCSI] scsi_transport_sas: remove local_attached flag
This flag denotes local attachment of the phy. There are two problems
with it:
1) It's actually redundant ... you can get the same information simply
by seeing whether a host is the phys parent
2) we condition a lot of phy parameters on it on the false assumption
that we can only control local phys. I'm wiring up phy resets in the
aic94xx now, and it will be able to reset non-local phys as well.
I fixed 2) by moving the local check into the reset and stats function
of the mptsas, since that seems to be the only HBA that can't
(currently) control non-local phys.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 0c269e6d3c615403a6e0acbe6e88f1c0da9c2396 |
|
12-Jul-2006 |
James Bottomley <James.Bottomley@steeleye.com> |
[SCSI] mptsas: add parent port backlink
This takes advantage of the sas class backlink function to show which
port on an expander is used to communicate with the parent.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| ba856d32f2cede67fd2a59a53bc662360f17c7b5 |
|
12-Jul-2006 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] mptfusion: misc fix's
* removing obsolete 1066, 1066E from Kconfig
* initializing aen_event_read_flag after host reset
* remove oem references
* remove obsolete mpt_pq_filter command line option
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e8bf39417b578a11e2ee2cd16e794a5b2d40757b |
|
11-Jul-2006 |
James Bottomley <James.Bottomley@steeleye.com> |
[SCSI] scsi_transport_sas: kill the use of channel
Using the port_id for the channel is completely unnecessary since the
host_id/target_id are constructed to be globally unique. Also move
the mptsas driver on to virtual channel 1 for its raid devices.
Acked-by: "Moore, Eric" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| dc22f16d4e46cee699c3835cc6e2a8005023517f |
|
06-Jul-2006 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] mptsas: use unnumbered port API and remove driver porttracking
This allows us to be rid of the machinery in mptsas for creating and
tracking port numbers. Since mptsas is merely inventing the numbers,
the SAS transport class may as well do it instead.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 2686de27a356914e098329463d5a8cd7aa6f29a4 |
|
30-Jun-2006 |
James Bottomley <James.Bottomley@steeleye.com> |
[SCSI] mptsas: eliminate ghost devices
One of the current problems the mptsas driver has is that of "ghost"
devices (these are devices the firmware reports as existing, but what
they actually represent are the parents of a lower device), so for
example in my dual expander configuration, three expanders actually show
up, two for the real expanders but a third is created because the
firmware reports that the lower expander also has another expander
connected (which is simply the port going back to the upper expander).
The attached patch eliminates all these ghosts by not allocating any
devices for them if the SAS address is the SAS address of the parent.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 376ac8307868f93a0b9aa277f43dee0f63c41c1b |
|
30-Jun-2006 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] mptsas: make two functions static
Make two needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 87cf89866790a373edcf88c12b64d6d38560acdd |
|
28-Jun-2006 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] mptsas: Adding 1078 ROC support
* Adding 1078 ROC (Raid On Chip) Support - New host adapter
* Moving all PCI Vendor/Device ids to using internal defines; a request
from Christoph/James B. some time ago for when the next chip was added.
* Removing SAS 1066/1066E Vendor/Device IDs, as there are no plans to
manufacture that controller.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 547f9a218436ea35baf9a52e981753e44d9cff1f |
|
27-Jun-2006 |
Eric Moore <eric.moore@lsil.com> |
[SCSI] mptsas: wide port support
* Wide port support added - using James Bottomley's new SAS wide port API.
(There is a known problem in sas transport layer reported yesterday to
James. The Kobject dev.bus_ids for end devices are not unique across
expanders. I have added a work around in this patch, where I asigning
an unique port identifier for every port within the host - this solves
the problem, but I expect a fix from James in the sas transport).
* Adding target_alloc and target_destroy entry points, and moving code over
from the slave entry points.
* The renaming of some mptscsih_xxx functions declared in mptsas.c,
to mptsas_xxx.
* Target Reset moved from slave_destroy to hotplug work thread
handling (with regard to device removal). Also inhibit IO to end device
while device is being broken down . Talked to James Smart about this
at Linux Expo (with questions of how the fc transport handles this).
* Cleaning up the kzalloc's, and kfree's
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 8f7607803717e9d045965b210cd16a25d80cd04b |
|
27-Jun-2006 |
Jesper Juhl <jesper.juhl@gmail.com> |
[PATCH] Remove redundant NULL checks before [kv]free - in drivers/
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for
drivers/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| bd23e94cd70f18700fc366451a8f1427e56ed137 |
|
17-Apr-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] mptfusion: bug fix's for raid components adding/deleting
This patch handles case where raid hidden components
are not being removed when power turned off to device
attached to expander, as well as the case of
exposing raid components when power is turned back on
to devices attached to an expander. (This is a repost
of this patch, with mptsas_is_end_device declared
further up in the code.)
This patch contains some other miscellaneous bug fix's.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 3c0c25b97c7d020ef07f6366cf1d668a8e980c7c |
|
14-Apr-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] mptfusion - fix panic in mptsas_slave_configure
Driver panic when RAID logical volume was present when driver
loaded, or when a RAID logical volume was created on the fly.
This issue was created in due to recent scsi_transport_sas change,
when sas_read_port_mode_page was added into the mptsas drivers
slave_config entry point.
This new API expects that all sdev's to be assocated to an rphy, however
that is not the case for logical volumes, as they are created using
scsi_add_device, instead of sas_rphy_add().
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f013db3284376070fc4c196e58d204180b8ed62a |
|
18-Mar-2006 |
James Bottomley <James.Bottomley@steeleye.com> |
[SCSI] convert mptsas over to end_device/expander allocations
The conversion of mptsas should allow the elimination of the contained
flag in the sas transport class.
Acked-by: "Moore, Eric" <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e6b2d76a49f0ee48527691867d8af2b8f9c10452 |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - expander hotplug suport in mptsas module
This adds support for hot adding and removing
expanders, and its associated attached devices.
When there is a change in topology,
the fusion firmware sends the
MPI_EVENT_SAS_DISCOVERY event to the driver.
The driver will read firmware config pages
to determine what changes took place, and refresh
drivers view of the world stored in ioc->sas_topology.
Here is the details of the action the driver does:
(1) Expander Added : The mptsas_discovery_work
workqueue is called. Config pages read, and
ioc->sas_topology is refreshed. The sas_phy_add()
is called for each phy of the expander. The
expanders attached devices are added via
sas_rphy_add(). Added end devices are handled within
the MPT_ADD_DEVICE logic in mptsas_hotplug_work
workqueue.
(2) Expander Delete : The sas_rphy_delete() will be
called for the top most compenent of the parent that the
expander is attached to. The sas_rphy_delete call
will delete all the children phys, rphys, and end devices.
This is handled from mptsas_discovery_work workqueue.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f44e5461d919a344d44f7ca4f06cf8d169da8454 |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - exposing raid components in mptsas
Suppport for exposing hidden raid components
for sg interface. The sdev->no_uld_attach flag
will set set accordingly.
The sas module supports adding/removing raid
volumes using online storage management application
interface.
This patch rely's on patch's provided to me
by Christoph Hellwig, that exports device_reprobe.
I will post those patch's on behalf of Christoph.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| db9c9174e42bdc8d52bc18df7c55823cf4546eda |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - memory leak, and initializing fields
Changelog:
(1) fix memory leak: p->phy_info
(2) initialize device_info and port_info data fields
(3) initialize the hba firmware handle
(4) initialize phy_id for attached phy_info data fields
(5) initialize attached phy_info data fields
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 52435430fc8724f09ad0e917eddf677583cdd45c |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - exclosure misspelled
exclosure should be enclosure
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 4b766471e388352f35a6171563dfc0d272f12b59 |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - cleanup mptsas event handling functions
Cleanup of mptsas firmware event handlers.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 914c2d8e597798d62c2e0a3cba737bf6f611eecf |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - removing target_id/bus_id from the VirtDevice structure
It makes no sense in keeping the target_id and bus_id
in the VirtDevice structure, when it can be obtained
from the VirtTarget structure.
In addition, this patch fix's couple compilation bugs
in mptfc.c when MPT_DEBUG_FC is enabled. This
provided by Micheal Reed.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 3a892bef3f7e94c4d6c2c20b9a1b546f43679fd3 |
|
14-Mar-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - move some debug firmware event debug msgs to verbose level
Created a debug level MPT_DEBUG_VERBOSE_EVENTS.
Moving some of the more vebose debug messages
for firwmare events into new debug level. Also
added some more firmware events descriptions.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| e3094447e013a59ccedcf60f6055f18225bd8465 |
|
16-Feb-2006 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: add support for enclosure and bay identifier attributes
Adds support to retrieve the enclosure and bay identifiers. This patch
is from Eric with minor modifications from me, rewritten from a buggy
patch of mine, based on the earlier CSMI implementation from Eric..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 23f236ed2748fca0bcba304f4f9e3eacda51e91c |
|
30-Jan-2006 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: don't complain on bogus slave_alloc calls
When people use the userspace scanning facilities on SAS hardware the
LLDD gets bogus slave_alloc calls. Just fail those gracefully instead
of printing a warning in mptsas and another one in the midlayer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 79de278e86121cd4473c276409f834aee87f3195 |
|
26-Jan-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion: move sas persistent event handling over to the mptsas module
This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 7d3eecf7b2195c64d26f7e7d105d00e5a6dd702e |
|
26-Jan-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion: target reset when drive is being removed
The issuing of the target reset
used in device hot removal case so the
firmware queue is flushed out off outstanding
commands.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| c73787eecdbe4691d4e3f989052db8b552e1ac34 |
|
27-Jan-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion: add support for raid hot add/del support
RAID event support.
This will hot add and remove raid volumes
when managment application creates and
deletes the volumes. The driver is basically
responding to firmware asyn events, and reporting
the changes to the above layers.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 816aa907b909177bdf6e6e6b0d00c5e5a6e2be8c |
|
14-Jan-2006 |
Moore, Eric <Eric.Moore@lsil.com> |
[SCSI] fusion - adding raid support in mptsas
The SAS RAID volumes are reported beyond the expected number of phys.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 1ca00bb7916cb40b8140173c23481e11d92d6f6a |
|
13-Jan-2006 |
Christoph Hellwig <hch@lst.de> |
[SCSI] fusion: kzalloc / kcalloc conversion
Convert kmalloc + memset to kzalloc or kcalloc in fusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| eeb846cefdd842af479393a7d0fd399a29e42532 |
|
13-Jan-2006 |
Christoph Hellwig <hch@lst.de> |
[SCSI] fusion: convert semaphores to mutexes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 9a28f49adbe4955af8a1306fd36ddae15136dde7 |
|
13-Jan-2006 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: support basic hotplug
Adds hotplug support for SAS end devices. Unfortunately the fusion
firmware doesn't generate similar events for expanders addition/removal
so we can't support them yet. Eric has an idea about a clever scheme to
find out about expander changes so that'll be added later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| c7c82987b4844f555d309ccbd42abe95d46822ff |
|
17-Nov-2005 |
Moore, Eric Dean <Eric.Moore@lsil.com> |
[SCSI] mptfusion - mapping fixs required support for transport layers.
This utilizes the hostdata area that is hung off of scsi_target and
scsi_device for saving unique firmware mapping. This will be required
for supporting new Fibre and SPI transport support.
This also fixs problems in error handling error code for SAS
controllers, in which the incorrect mapping was passed to the
firmware.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 7acec1e7556a861416bb6b10f3e3cbb6e82fc01d |
|
17-Nov-2005 |
Moore, Eric Dean <Eric.Moore@lsil.com> |
[SCSI] mptfusion - cleaning up xxx_probe error handling
This cleans the returning failure conditions of the
mptsas/mptfc/mptspi probe routines.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f78496da6a85f4b5f4532d7bf85b05fa655146a8 |
|
17-Nov-2005 |
Moore, Eric Dean <Eric.Moore@lsil.com> |
[SCSI] mptfusion - adding = THIS_MODULE
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| f9a2d2e0c89f73f0203fa796101089c2bce31974 |
|
19-Oct-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: white space fixes and version bump
Various whitespace and comment fixes from Eric, aswell as a version
bump.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| da4fa65596733914b3c21fdffa02593959c67f56 |
|
19-Oct-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: add support for PHY resets
Support PHY resets in mptsas. Thanks to Eric for various bug fixes
and improvements.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| ac01bbbd3b7ebfca64357aed12cf476b16abe3ce |
|
19-Oct-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] sas: add flag for locally attached PHYs
Add a flag to mark a PHY as attached to the HBA as opposed to beeing on
an expander. This is needed because various features are only supported
on those. This is a crude hack, the proper fix would be to use
different classes for host-attached vs expander phys. I'm looking into
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| b5141128027c53b8ca40736d969f75c9a1cdb64b |
|
28-Oct-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: support link error attributes
.. and the fusion part. I had to move around the debug functions around
a little bit so they are below the transport class methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 024358eeafd44ecffd0e7a1002ef3ccc1d0acd4d |
|
21-Oct-2005 |
Eric Moore <Eric.Moore@lsil.com> |
[PATCH] mptsas: fix phy identifiers
This fixes handling of the phy identifiers in mptsas.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
[ split it a pre-2.6.14 portion from Eric's bigger patch ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 16192896ea8e03d18d4228023500607b00df49e6 |
|
17-Oct-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] mptsas: fix phy identifiers
This patch from Eric fixes handling of the phy identifiers in mptsas.
I've split it up from his bigger patch as it should go into 2.6.14
still.
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 466544d8898fc87ed6e2e62ac14af7c50ab7a1a4 |
|
15-Sep-2005 |
Moore, Eric Dean <Eric.Moore@lsil.com> |
[SCSI] fusion SAS support (mptsas driver) updates
Summary of Changes:
* splitting mpt_interrupt per Christophs suggestion
about a month ago
* rename ScsiCfgData to SpiCfgData structure,
then move all the raid related info into
new structure called RaidCfgData. This is
done because SAS supports RAID, as well as SPI,
so the raid stuff should be seperate.
* incorrect timeout calculation for cntdn
inside WaitForDoorbellAck and WaitForDoortbellInt
* add support for interpreting SAS Log Info
* Increase Event Log Size from 0xA to 0x32
* Fix bug in mptsas/mptfc/mptspi - when controller
has Initiator Mode Disabled, and only running in
TargetMode, the mptctl would panic when loading.
The fix is to return 0, instead of -ENODEV, in
SCSI LLD respective probe routines
* Fix bug in mptlan.c - driver will panic if
there is host reset, due to dev being set to
zero in mpt_lan_ioc_reset
* Fix's for SPI - Echo Buffer
* Several fix's in mptscsih_io_done - FCP Response
info, RESIDUAL_MISMATCH, Data Underrun, etc.
* Cleanup Error Handling - EH handlers,
mptscsih_flush_cmds, and zeroing out ScsiLookup
from mptscsih_qcmd
* Cleanup asyn event handling from
mptscsih -> mptscsih_event_process. Also
added support for SAS Persistent Table Full,
an asyn event
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|
| 0c33b27deb93178f10778b3d2669af1674793cef |
|
09-Sep-2005 |
Christoph Hellwig <hch@lst.de> |
[SCSI] fusion SAS support (mptsas driver)
Adds the actual mptsas driver, based upon the LSI driver with new work
for SAS transport class integration from Eric Moore and me.
This obviously depends on the SAS transport class.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
|