| b11ec57fc6e6d4882ef01a0c09a1dde58f50492e |
|
21-Mar-2012 |
Ryosuke Saito <raitosyo@gmail.com> |
mtd: phram: fix section mismatch for phram_setup
phram_setup() is only called from init_phram() which is in .init.text,
so it must be in the same section to avoid a section mismatch warning.
Signed-off-by: Ryosuke Saito <raitosyo@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| b2a2a84d35e0f42ad26e326ec4258f6a8b8eecbe |
|
13-Mar-2012 |
Hervé Fache <h-fache@ti.com> |
mtd: phram: dot not crash when built-in and passing boot param
This patch is based on Ville Herva's similar patch to block2mtd.
Trying to pass a parameter through the kernel command line when built-in would
crash the kernel, as phram_setup() was called so early that kmalloc() was not
functional yet.
This patch only saves the parameter string at the early boot stage, and parses
it later when init_phram() is called. The same happens in both module and
built-in cases.
With this patch, I can boot with a statically-compiled phram, and mount a
ext2 root fs from physical RAM, without the need for a initrd.
This has been tested in built-in and module cases, with and without a
parameter string.
Artem: amended comments a bit
Signed-off-by: Hervé Fache <h-fache@ti.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 0dd5235f51fb0eb0b8cef3fed35be39b8a06d7bd |
|
08-Feb-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: harmonize mtd_point interface implementation
Some MTD drivers return -EINVAL if the 'phys' parameter is not NULL, trying to
convey that they cannot return the physical address. However, this is not very
logical because they still can return the virtual address ('virt'). But some
drivers (lpddr) just ignore the 'phys' parameter instead, which is a more
logical thing to do.
Let's harmonize this and:
1. Always initialize 'virt' and 'phys' to 'NULL' in 'mtd_point()'.
2. Do not return an error if the physical address cannot be found.
So as a result, all drivers will set 'phys' to 'NULL' if it is not supported.
None of the 'mtd_point()' users use 'phys' anyway, so this should not break
anything. I guess we could also just delete this parameter later.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 834247ec7e281dee839fe4a04bc1bbf0c7395172 |
|
05-Feb-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: remove retlen zeroing duplication
The MTD API function now zero the 'retlen' parameter before calling
the driver's method — do not do this again in drivers. This removes
duplicated '*retlen = 0' assignent from the following methods:
'mtd_point()'
'mtd_read()'
'mtd_write()'
'mtd_writev()'
'mtd_panic_write()'
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 664addc248d2fed68d013d26ff2fc796d7134259 |
|
03-Feb-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: remove R/O checking duplication
Many drivers check whether the partition is R/O and return -EROFS if yes.
Let's stop having duplicated checks and move them to the API functions
instead.
And again a bit of noise - deleted few too sparse newlines, sorry.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 5def48982b778aaebe201f85af7170b7d0a6619f |
|
03-Feb-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: do not duplicate length and offset checks in drivers
We already verify that offset and length are within the MTD device size
in the MTD API functions. Let's remove the duplicated checks in drivers.
This patch only affects the following API's:
'mtd_erase()'
'mtd_point()'
'mtd_unpoint()'
'mtd_get_unmapped_area()'
'mtd_read()'
'mtd_write()'
'mtd_panic_write()'
'mtd_lock()'
'mtd_unlock()'
'mtd_is_locked()'
'mtd_block_isbad()'
'mtd_block_markbad()'
This patch adds a bit of noise by removing too sparse empty lines, but this is
not too bad.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 5e4e6e3fdf48c1b012e2b6e80ed1d7e99d4fa6d1 |
|
03-Feb-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: return error code from mtd_unpoint
The 'mtd_unpoint()' API function should be able to return an error code because
it may fail if you specify incorrect offset. This patch changes this MTD API
function and amends all the drivers correspondingly.
Also return '-EOPNOTSUPP' from 'mtd_unpoint()' when the '->unpoint()' method is
undefined. We do not really need this currently, but this just makes
sense to be consistent with 'mtd_point()'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 3c3c10bba1e4ccb75b41442e45c1a072f6cded19 |
|
30-Jan-2012 |
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> |
mtd: add leading underscore to all mtd functions
This patch renames all MTD functions by adding a "_" prefix:
mtd->erase -> mtd->_erase
mtd->read_oob -> mtd->_read_oob
...
The reason is that we are re-working the MTD API and from now on it is
an error to use MTD function pointers directly - we have a corresponding
API call for every pointer. By adding a leading "_" we achieve the following:
1. Make sure we convert every direct pointer users
2. A leading "_" suggests that this interface is internal and it becomes
less likely that people will use them directly
3. Make sure all the out-of-tree modules stop compiling and the owners
spot the big API change and amend them.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| ee0e87b174bb41f0310cf089262bf5dd8f95a212 |
|
23-May-2011 |
Jamie Iles <jamie@jamieiles.com> |
mtd: convert remaining users to mtd_device_register()
The older add_mtd_device()/add_mtd_partitions() and their removal
counterparts will soon be gone. Replace uses with mtd_device_register()
and mtd_device_unregister().
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| f17f12ce9dd6ec0a8e1f415ecdbaebfce0207464 |
|
30-Jan-2011 |
Mathias Krause <minipli@googlemail.com> |
mtd: phram: fix memory leak
Commit 4f678a58 (mtd: fix memory leaks in phram_setup) missed two cases
where the memory allocated for name would be leaked. This commit frees
the memory when register_device() fails and on unregister_devices().
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 1cd844fe43cb6464b34dea504930c1a15e4ad38d |
|
20-Oct-2010 |
Joe Perches <joe@perches.com> |
mtd: phram: use KBUILD_MODNAME
Use the more standard #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
No change in output strings.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 64da392ab08a88ad83f4c3f60283711ee090c9ef |
|
16-Jun-2009 |
Mike Frysinger <vapier@gentoo.org> |
phram: cleanup error handling and associated messages
The error handling in the phram driver is pretty bad -- in many places,
errors are silently ignored or logged, but then still ignored in the
return value. So convert all of the code to pass back the correct return
value and log error messages properly (and using the new pr_fmt() helper).
If everything does go smoothly, rather than exit silently, dump a helpful
info message like pretty much every other MTD driver does.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Joern Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
| 59018b6d2acabb114ab58637e6ab95ba424a89d0 |
|
20-May-2008 |
Adrian Bunk <bunk@kernel.org> |
MTD/JFFS2: remove CVS keywords
Once upon a time, the MTD repository was using CVS.
This patch therefore removes all usages of the no longer updated CVS
keywords from the MTD code.
This also includes code that printed them to the user.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| a98889f3d8882995b5aa2255b931cf0202325cc0 |
|
30-Apr-2008 |
Jared Hulbert <jaredeh@gmail.com> |
[MTD][NOR] Add physical address to point() method
Adding the ability to get a physical address from point() in addition
to virtual address. This physical address is required for XIP of
userspace code from flash.
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Reviewed-by: Jörn Engel <joern@logfs.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| f72561cf6c9d0671da57902bc2ffee03b074227a |
|
31-Mar-2008 |
Mark Hindley <mark@hindley.org.uk> |
[MTD] Correct phram module param description
Signed-off-by: Mark Hindley <mark@hindley.org.uk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| 2b54aaef7a3a77f208bc14f576010da4fb8dfe29 |
|
06-Feb-2008 |
Joern Engel <joern@lazybastard.org> |
Claim maintainership for block2mtd and update email addresses
I have been prime author and maintainer of block2mtd from day one, but
neither MAINTAINERS nor the module source makes this fact clear. And while
I'm at it, update my email addresses tree-wide, as the old address
currently bounces and change my name to "joern" as unicode will likely
continue to cause trouble until the end of this century.
Signed-off-by: Joern Engel <joern@lazybastard.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| 95b93a0cd46682c6d9e8eea803fda510cb6b863a |
|
15-Nov-2006 |
Burman Yan <yan_952@hotmail.com> |
[MTD] replace kmalloc+memset with kzalloc
Signed-off-by: Yan Burman <yan_952@hotmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| 17ffc7ba6d7ea68b8d5f55a5ca1b87163e69720d |
|
22-Jun-2006 |
Artem B. Bityutskiy <dedekind@sauron.oktetlabs.ru> |
[MTD] Initialize 'writesize'
Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
|
| 21c8db9eff95260e543535dfc6f27164c4c0c0ff |
|
14-Jun-2006 |
David Woodhouse <dwmw2@infradead.org> |
[MTD] Restore MTD_ROM and MTD_RAM types
Let's not attempt the abolition of mtd->type until/unless it's properly
thought through. And certainly, let's not do it by halves.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| 92cbfdcc3661d7670b01b92b89811cd3a2412297 |
|
30-May-2006 |
Joern Engel <joern@wh.fh-wedel.de> |
[MTD] replace MTD_RAM with MTD_GENERIC_TYPE
Ram devices get the extra capability of MTD_NO_ERASE - not requiring
an explicit erase before writing to it. Currently only mtdblock uses
this capability. Rest of the patch is a simple text replacement.
Signed-off-by: Joern Engel <joern@wh.fh-wedel.de>
|
| 151e76590f66f5406eb2e1f4270c5323f385d2e8 |
|
14-May-2006 |
David Woodhouse <dwmw2@infradead.org> |
[MTD] Fix legacy character sets throughout drivers/mtd, include/linux/mtd
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| 4f678a58d335291ce9213c049bbe16e6d24487ed |
|
14-May-2006 |
Jesper Juhl <jesper.juhl@gmail.com> |
mtd: fix memory leaks in phram_setup
There are two code paths in drivers/mtd/devices/phram.c::phram_setup() that
will leak memory.
Memory is allocated to the variable 'name' with kmalloc() by the
parse_name() function, but if we leave by way of the parse_err() macro,
then that memory is never kfree()'d, nor is it ever used with
register_device() so it won't be freed later either - leak.
Found by the Coverity checker as #593 - simple fix below.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| a6c591eda3078f92e7a3ff3db55f6841e4819fb5 |
|
13-Apr-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove unchecked MTD flags
Several flags are set by some devices, but never checked. Remove them.
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
| e5580fbe8a950131b9ccccce0f962811dfb9ef43 |
|
07-Nov-2005 |
Thomas Gleixner <tglx@linutronix.de> |
[MTD] devices: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 4e57b6817880946a3a78d5d8cad1ace363f7e449 |
|
31-Oct-2005 |
Tim Schmielau <tim@physik3.uni-rostock.de> |
[PATCH] fix missing includes
I recently picked up my older work to remove unnecessary #includes of
sched.h, starting from a patch by Dave Jones to not include sched.h
from module.h. This reduces the number of indirect includes of sched.h
by ~300. Another ~400 pointless direct includes can be removed after
this disentangling (patch to follow later).
However, quite a few indirect includes need to be fixed up for this.
In order to feed the patches through -mm with as little disturbance as
possible, I've split out the fixes I accumulated up to now (complete for
i386 and x86_64, more archs to follow later) and post them before the real
patch. This way this large part of the patch is kept simple with only
adding #includes, and all hunks are independent of each other. So if any
hunk rejects or gets in the way of other patches, just drop it. My scripts
will pick it up again in the next round.
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
| 663259a44f440249cab1b0f3f4b82cfab8e4758d |
|
07-Mar-2005 |
Joern Engel <joern@wohnheim.fh-wedel.de> |
[MTD] phram: Allow short reads.
Jffs2 apparently needs this.
Accept newline at the end of input.
Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| d30f11d22549c54e9b05d153e37d166f88a2aa43 |
|
23-Feb-2005 |
Joern Engel <joern@wohnheim.fh-wedel.de> |
[MTD] Use after free, found by the Coverity tool
Signed-off-by: Alexander Nyberg <alexn@dsv.su.se>
Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
|