| ffe455ad04681f3fc48eef595fe526a795f809a3 |
|
13-Dec-2011 |
Eugenia Emantayev <eugenia@mellanox.co.il> |
mlx4: Ethernet port management modifications
The physical port is now common to the PF and VFs.
The port resources and configuration is managed by the PF, VFs can
only influence the MTU of the port, it is set as max among all functions,
Each function allocates RX buffers of required size to meet it's MTU enforcement.
Port management code was moved to mlx4_core, as the mlx4_en module is
virtualization unaware
Move handling qp functionality to mlx4_get_eth_qp/mlx4_put_eth_qp
including reserve/release range and add/release unicast steering.
Let mlx4_register/unregister_mac deal only with MAC (un)registration.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il>
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|
| f9baff509f8a05a79626defdbdf4f4aa4efd373b |
|
13-Dec-2011 |
Jack Morgenstein <jackm@dev.mellanox.co.il> |
mlx4_core: Add "native" argument to mlx4_cmd and its callers (where needed)
For SRIOV, some Hypervisor commands can be executed directly (native = 1).
Others should go through the command wrapper flow (for tracking resource
usage, for example, or for changing some HCA configurations that slaves
need to be notified of).
This patch sets the groundwork for this capability -- adding the correct
value of "native" in each case.
Note that if SRIOV is not activated, this parameter has no effect.
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|
| ad04378cecca9c33b5ea3e46aa4ed71b15e0be0c |
|
18-Oct-2011 |
Yevgeny Petrilin <yevgenyp@mellanox.co.il> |
mlx4_en: Checksum counters per ring
Not updating common counters from data path.
The checksum counters are per ring, summarizing them when collecting statistics.
Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|
| f0ec7177e239ed94a398a6c70b38530ff1393cb7 |
|
09-Oct-2011 |
Alexander Guller <alexg@mellanox.com> |
mlx4_en: Adding 40gb speed report for ethtool
Query port will now identify a 40G Ethernet speed.
Signed-off-by: Alexander Guller <alexg@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|
| 999bb4b3831abd6ad53023a0b8e5d304875927dd |
|
09-Oct-2011 |
Alexander Guller <alexg@mellanox.com> |
mlx4_en: Fix QP number calculation according to module param
Number of bits taken from mac table index in QP
calculation should be based on log_num_mac parameter.
Signed-off-by: Alexander Guller <alexg@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|
| 5a2cc190eb3fe58fe519795c509b01b25795992e |
|
13-May-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
mlx4: Move the Mellanox driver
Moves the Mellanox driver into drivers/net/ethernet/mellanox/ and
make the necessary Kconfig and Makefile changes.
CC: Roland Dreier <roland@kernel.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
/drivers/net/ethernet/mellanox/mlx4/en_port.c
|