| dbccdd1d320e8454e25750ba6adec3b0d0688fe8 |
|
22-Feb-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k_hw: Use CONFIG_ATH9K_BTCOEX_SUPPORT
Make use of CONFIG_ATH9K_BTCOEX_SUPPORT in ath9k_hw
to provide a clean way of compilation without BTCOEX
support.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 4daa7760e2da9324e740f7d872970fa91c8ea6f0 |
|
21-Feb-2012 |
Sujith Manoharan <c_manoha@qca.qualcomm.com> |
ath9k: Use CONFIG_ATH9K_BTCOEX_SUPPORT
This patch uses CONFIG_ATH9K_BTCOEX_SUPPORT to conditionally
compile btcoex-related code in the driver core.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 29942bc125374b5aa049a438fb628ea729538ca5 |
|
15-Dec-2011 |
Zefir Kurtisi <zefir.kurtisi@neratec.com> |
ath9k: add DFS radar pulse processing
This initial DFS module provides basic functionality to deal
with radar pulses reported by the Atheros DFS HW pulse detector.
The reported data is evaluated and basic plausibility checks
are performed to filter false pulses. Passing radar pulses are
forwarded to pattern detectors which are not yet implemented.
(Some modifications to actually use ATH9K_DFS_DEBUGFS based on comments
from Julian Calaby <julian.calaby@gmail.com>. -- JWL)
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| bbefb8715298ce8c6a1da03da16efaa6f1ff4237 |
|
30-Nov-2011 |
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> |
ath9k_hw: Add MCI h/w code and state machine
Cc: Wilson Tsao <wtsao@qca.qualcomm.com>
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 7dc181c273861c4d96991f59a4fdcda3a3eaccae |
|
24-Oct-2011 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k: Add btcoex profile management support for AR9462
AR9462 chips have the capabilities to provoide bluetooth
profile information. For non-AR9462 btcoex chips, the BT
priority traffic was identified by periodically polling
the respective registers and updated dutycycle, stomptype,
etc. As AR9462 chip offers the BT profile informations,
let us make use of that to update aggregation limit,
dutycycle, stomptype and wieghtages.
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 324c74ad64c7528a9cf243455723d5ed57238e15 |
|
13-Oct-2011 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k_hw: Add radio retention support for AR9480
Supported calibrations of radio retention table (RTT) are
- DC offset
- Filter
- Peak detect
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 8e42e4ba98f986be64016df79eacbb671dbd3d18 |
|
13-Apr-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_htc: Move debug code to a separate file
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 8e26a0303614e766f993b1ac4a5bfbf80436d9dd |
|
12-Apr-2011 |
Gabor Juhos <juhosg@openwrt.org> |
ath9k: introduce ATH9K_{PCI,AHB} config options
Currently ath9k only available in menuconfig if PCI bus
support is enabled. However the driver is required for
the built-in wireless MACs of the Atheros AR9130/AR9132
SoCs. These SoCs have no PCI controller, the wireless
MAC is connected to the AHB bus on them.
Introduce separated config options for the supported
buses, in order to allow building of ath9h without PCI
bus support.
As a bonus, this patch removes the cross-reference of
the ATHEROS_AR71XX option which is not present in the
kernel.
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 7545daf498c43e548506212310e6c75382d2731d |
|
24-Jan-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: remove support for virtual wiphys
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 6e5c2b4e8addfaab8ef54dedaf7b607e1585c35b |
|
20-Sep-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: make the driver specific rate control module optional
ath9k can use minstrel_ht instead, so it makes sense to save some space here.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 21cb987914cb5334af78378141efed77505ea987 |
|
18-Aug-2010 |
Vivek Natarajan <vnatarajan@atheros.com> |
ath9k_htc: Add support for bluetooth coexistence.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 717f6bedcd2d3d39624437e1de7067c90ec931f0 |
|
12-Jun-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: add functions for controlling PA predistortion calibration
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| b622a720b45def8dce816244a83b82992da4fe20 |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: move AR9002 mac ops to its own file
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 15c9ee7af8a3527a82013ea447da2d8c491aabfe |
|
15-Apr-2010 |
Senthil Balasubramanian <senthilkumar@atheros.com> |
ath9k_hw: Implement AR9003 eeprom callbacks
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| b3950e6a52b1d0279787ef44ba1efac2f3414260 |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: split the generic hardware code by hardware family
Move out the generic hardware family code out into their own
files, we have one for AR5008, AR9001, and AR9002 family (ar9002_hw.c)
and another file for the new AR9003 hardware family (ar9003_hw.c).
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 795f5e2ca672727a96bacf97075976cfe1249fcf |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: split calib code by hardware families
Calibration code touches phy registers and since these
change the calibration code needs to be abstracted.
Noise floor calibration is the only thing remaining but
since the remaining calls only touch the AR_PHY_AGC_CONTROL
register we'll just define that register conditionally, that
will be done separately. The goal is to remove the dependency
of ar9002_phy.h on calib.c
This also adds stubs to be filled for AR9003 calibration code.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| ae3bb6d4628dae7ead588263177a0674221fea78 |
|
15-Apr-2010 |
Vasanthakumar Thiagarajan <vasanth@atheros.com> |
ath9k_hw: Fill rx_enable() for the AR9003 hardware family
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 8525f2801df14b6c4ae6a96127e47d646be5304c |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: Add AR9003 PHY support
This add stubs for PHY support for the AR9003 hardware family.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 8fe6536850ae49609704a263cbc7542133536922 |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: Move some RF ops to the private callbacks
The PHY split is easier done in a few steps. First move
the RF ops to the private ops and rename them accordingly.
We split PHY stuff up first for the AR5008 and AR9002
families. There are some callbacks that AR9002 share
with the AR5008 familiy so we set those first, if AR9002
has some different callbacks it will override them upon
hardware init.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| fb9987d0f748c983bb795a86f47522313f701a08 |
|
17-Mar-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_htc: Support for AR9271 chipset.
Features:
* Station mode
* IBSS mode
* Monitor mode
* Legacy support
* HT support
* TX/RX 11n Aggregation
* HW encryption
* LED
* Suspend/Resume
For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 556242049cc3992d0ee625e9f15c4b00ea4baac8 |
|
08-Jan-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Add new file init.c
Move initialization/de-initialization related
code to this file.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 0fca65c1c0569d6a143e978b6f4974c519033e63 |
|
08-Jan-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Add a new file for GPIO
Move all LED/RFKILL/BTCOEX related code
to gpio.c
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| a830df0714117574fd0d5fe98477059b3e9fd5bf |
|
23-Nov-2009 |
Felix Fietkau <nbd@openwrt.org> |
ath9k: separate debugfs support from CONFIG_ATH_DEBUG
In my setups, ath9k's debugfs files are most of the time much more
useful than the messages generated by enabling CONFIG_ATH_DEBUG along
with the right debug flags.
Since CONFIG_ATH_DEBUG comes with a noticeable overhead on embedded
systems, this patch makes it possible to use the debugfs files without
that option.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| db86f07ec6cdea9670a0928bd1289109d2a989dc |
|
05-Nov-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_common: add new module to share 802.11n driver helpers
ath9k and ath9k_htc share a lot of common hardware characteristics.
They only differ in that ath9k_htc works with a target CPU and ath9k
works directly with the hardware. ath9k_htc will do *some* things in
the firmware, but a lot of others on the host.
The common 802.11n hardware code is already shared through the ath9k_hw
module. Common helpers amongst all Atheros drivers can use the ath module,
this includes ath5k and ar9170 as users. But there is some common driver
specific helpers which are not exactly hardware code which ath9k and
ath9k_htc can share. We'll be using ath9k_common for this to avoid
bloating the ath module and the common 802.11n hardware module ath9k_hw.
We start by sharing skb pre and post processing in preparation for a hand
off to mac80211.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 7322fd19295fa7f7d954a19a5f0b77687d441846 |
|
24-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: move hw code to its own module
hw code for Atheros 802.11n hardware is commmon between
different chipsets. This moves this code into a separate
module, the next expected user of this code will be
the ath9k_htc module.
The ath9k/ dir is now selected by ATH9K_HW, an option which
gets selected by either ath9k or ath9k_htc, but remains
invisible for user menuconfig configuration. If either
ath9k or ath9k_htc will be compiled into the kernel
ath9k_hw will also be compiled in.
Cc: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 5bb127913299b37fceecf66ce86ee8ede70e7d13 |
|
14-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: move bus ops to ath_common
This is the last part to make ath9k hw code core driver agnostic.
I believe ath9k_htc can now use use the hw code unmodified.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 990b70ab24cbce585a3436c8c88cb48b888d48b4 |
|
14-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: move ATH9K_RSSI_BAD to hw.h
mac.c is now core driver independent.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| cfe8cba982cda73d4970dab712411bebdcc3b9cd |
|
14-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: clarify what hw code is and remove ath9k.h from a few files
hw code will be shared between ath9k and ath9k_htc.
Just a few more files are left to clean up, mark them as well.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 17d50d1df48631ae868958032edada7aa920636b |
|
26-Aug-2009 |
Vasanthakumar Thiagarajan <vasanth@atheros.com> |
ath9k: Move btcoex stuff from hw.[ch] to new btcoex.[ch]
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| b5aec950eeb433d4850c1e5fcf14b666048e647d |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Split eeprom.c into manageable pieces
Add eeprom_def.c, eeprom_4k.c and eeprom_9287.c
This improves maintainability.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|
| 203c4805e91786f9a010bc7945a0fde70c9da28e |
|
31-Mar-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: put atheros wireless drivers into ath/
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/Makefile
|