| 02f77195db6ce252d5488b6d48d8edc1c5e2aa30 |
|
15-Jan-2012 |
Joe Perches <joe@perches.com> |
brcm80211: Use pr_fmt and pr_<level>
Convert printks to pr_<level>
Prefix logging with pr_fmt.
Use ##__VA_ARGS__ in some WL_ logging macros.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 18aad4f8e11530fd7e41d0faea0752c3a0ce799c |
|
15-Jan-2012 |
Joe Perches <joe@perches.com> |
brcm80211: Convert printk(KERN_DEBUG to pr_debug
Use pr_debug to allow dynamic debugging to work.
Move an #endif to allow brcmf_dbg_hex_dump
to be outside the #if/#endif block.
Move a const char* declaration to be inside a
pr_debug so the function doesn't need a #if/#endif
block.
Don't use temporaries in debugging functions so
the code can be optimized away.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 1e02382979dd422e3b1bdb45545a0699497e3692 |
|
15-Jan-2012 |
Joe Perches <joe@perches.com> |
brcm80211: Add and use brcmX_dbg_dump_hex
Reduce the number of #ifdef DEBUG uses by
adding a dbg_hex_dump routine which has the
appropriate #ifdef DEBUG test.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 8ae746543c8370fd04c28aaf8f185c1687b0e694 |
|
15-Jan-2012 |
Joe Perches <joe@perches.com> |
brcm80211: Use normal DEBUG define
Current CONFIG_BRCMDBG flag when enabled does not
necessarily enable proper pr_debug output when
DEBUG is not also enabled.
Remove BCMDBG define and just use DEBUG instead.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 53ee4bc46784ad53d0a9be52e8d687dd4e89a055 |
|
10-Nov-2011 |
Arend van Spriel <arend@broadcom.com> |
brcm80211: util: remove pointer traversal from brcmu_pkt_buf_free_skb
The function brcmu_pkt_buf_free_skb() was following the next pointer
to free all linked packets. However, it is only called with unlinked
packets so this can be removed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 9a95e60e0610bb8ec39c74d2c8546514a76428df |
|
10-Nov-2011 |
Arend van Spriel <arend@broadcom.com> |
brcm80211: util: move brcmu_pkttotlen() function to brcmfmac
The functions brcmu_pkttotlen() is only used in brcmfmac driver
so it has been moved there. It also does not use the sk_buff
next pointer anymore but walks a skb queue to determine the total
length.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| ad3b8b39189689dbff84c8a8edf024511b087f87 |
|
10-Nov-2011 |
Arend van Spriel <arend@broadcom.com> |
brcm80211: util: use sk_buff_head in precedence queue functions
Instead of dealing with sk_buff prev pointers the queue functions
now make use of the sk_buff_head functions provided by the kernel.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 09c7dfa0f01e906671f303061babb7e6ddce2c92 |
|
18-Oct-2011 |
Arend van Spriel <arend@broadcom.com> |
brcm80211: util: remove function brcmu_format_hex() from brcmutil
The function brcmu_format_hex() filled a string buffer with byte
values from a data buffer. The calling function used this string
buffer in a printk. Now the calling function uses the kernel
function print_hex_dump_bytes().
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 20e5ca16397648811a9e1ad531360c843e005a57 |
|
18-Oct-2011 |
Arend van Spriel <arend@broadcom.com> |
brcm80211: util: move brcmu_pktfrombuf() function to brcmfmac
The function brcmu_pktfrombuf was only used in the brcmfmac source
and has been moved there. It has been refactored to match its use.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| b7a57e762ecf5d9971549ab3f9eb66b559840e72 |
|
12-Oct-2011 |
Stephen Rothwell <sfr@canb.auug.org.au> |
net: wireless: brcm80210: include module.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 447606514450655885c5369782d7baa2478916a7 |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: moved function brcmu_format_flags
Moved the brcmu_format_flags function and brcmu_bit_desc structure
into smac. Names were adjusted accordingly.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 53a2277d2ad411b440d2f102ced7bebef42c2fd7 |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: moved function brcmu_mkiovar
Moved the brcmu_mkiovar function into fmac, adjusting the
name accordingly.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| f8e4b412c9df596557baf36f9d9635fd4f55a2a0 |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: moved function brcmu_parse_tlvs
Moved the brcmu_parse_tlvs function and brcmu_tlv structure into
the only file using them. Names were adjusted accordingly.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| b0551fb7e01d76165367ce77ddfcb80009b31427 |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: moved function brcmu_chipname
Moved the brcmu_chipname function into the only file using it.
The function name was adjusted accordingly.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| ef6ac17a20a424fdfb049ae475d62b92c192d1bc |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: moved power conversion functions
Moved brcmu_mw_to_qdbm and brcmu_qdbm_to_mw functions into the only
file using them. Names were adjusted accordingly.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| f53b170f465d52546c33faa962c3d2609a6bf5b3 |
|
12-Oct-2011 |
Alwin Beukers <alwin@broadcom.com> |
brcm80211: removed unused functions
Removed brcmu_bitcount, brcmu_mhz2channel, brcmu_chspec_ctlchan.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|
| 5b435de0d786869c95d1962121af0d7df2542009 |
|
05-Oct-2011 |
Arend van Spriel <arend@broadcom.com> |
net: wireless: add brcm80211 drivers
Add the brcm80211 tree to drivers/net/wireless, and disable the version that's
in drivers/staging. This version includes the sources currently in staging,
plus any changes that have been sent out for review.
Sources in staging will be deleted in a followup patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/brcm80211/brcmutil/utils.c
|