| 83626404a70da74c67f32f119e53c0ba032ba2d8 |
|
07-Mar-2012 |
Don Fry <donald.h.fry@intel.com> |
iwlwifi: more status bit factoring
Continue splitting the status bits between transport and op_mode.
All but a few are separated.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 9a716863ae4a2f039bc4d0b2b2bb4b24a1dc7a91 |
|
07-Mar-2012 |
Don Fry <donald.h.fry@intel.com> |
iwlwifi: separate status to priv and trans
The shared status bits are a mixture of transport and op mode bits.
Some are used just by one or the other, some are shared. Begin the
de-tangling of these bits.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| bfe4b80e9f7385f34986736cdc094be56782109a |
|
07-Mar-2012 |
Stanislaw Gruszka <sgruszka@redhat.com> |
iwlwifi: always check if got h/w access before write
Before we write to the device registers always check if
iwl_grap_nic_access() was successful.
On the way change return type of grab_nic_access() to bool, and add
likely()/unlikely() statement.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 84abd2cc066fc077c424d0faf7618be348a7efb2 |
|
06-Mar-2012 |
Johannes Berg <johannes.berg@intel.com> |
iwlwifi: move status check functions out of shared
They are only used in the DVM op_mode.
Also move the rfkill debug macros that
depend on them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| b1eea297d6b522b801c95b60b1e64fb61228c6c7 |
|
06-Mar-2012 |
Johannes Berg <johannes.berg@intel.com> |
iwlwifi: move mutex out of shared
Now the mutex no longer needs to be
shared, so move it into iwl_priv.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 1ee158d83853a9f5c1465be56d56ff56e6698e92 |
|
17-Feb-2012 |
Johannes Berg <johannes.berg@intel.com> |
iwlwifi: move workqueue to priv
In order to separate the different parts of the
driver better, we are reducing the shared data.
This moves the workqueue to "priv", and removes
it from the transport. To do this, simply use
schedule_work() in the transport.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 1042db2af183b96cdce5972014d85e8bca0634ad |
|
03-Jan-2012 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlwifi: give trans to all the read / write functions
From now on, the transport layer in charge of providing access to the
device. So change all the driver to give a pointer to the transport
to all the low level functions that actually access the device.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 4e3182626a914443a5e0fbe014813f03e51a75df |
|
27-Dec-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlwifi: update Copyright
Update Copyright to 2012
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 3862241945026a8fa165ab73c57739df77b8e1fb |
|
16-Dec-2011 |
Don Fry <donald.h.fry@intel.com> |
iwlwifi: move iwl_cfg from iwl_priv to iwl_shared
Move the configuration pointer from the upper level iwl_priv to the
lower level iwl_shared structure, with associated code fixes.
Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 0288356272153f916f31b8331780a7336872f63b |
|
23-Sep-2011 |
Johannes Berg <johannes.berg@intel.com> |
iwlagn: remove Kelvin support
Only 5150 series devices report their temperature
in Kelvin, and for those we already convert it to
Celsius when storing into priv->temperature, so
there's no way priv->temperature will ever be in
Kelvin. Remove support for this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 7f90dce1ea9de432cf1f196c743a8d5a119e38ba |
|
23-Sep-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: use kcalloc when possible for array allocation
As everybody knows kcalloc checks the multiplication is safe and
that we don't run into overflow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 859cfb0a99369cf51dc2125ebc3476382a15c322 |
|
15-Sep-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: move iwl_stop / wake_queue to the upper layer
Add a wrapper in the upper layer to call the mac80211's function.
This allows not to have the transport layer call mac80211 directly.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| e20d434170c3a7f388d5e916825499c9c0738606 |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: move the stop / wake queue logic to transport layer
priv->mac80211_registered and priv->hw needed to move to shared.
stop_queue API was added in order to allow the upper layer to stop
the SW queues for regulatory purposes.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 83ed90155f98bd949735c2cc22d832b557a6d7d1 |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: all function iwl-io.c receive iwl_bus
Which means that iwl-io.c doesn't need to include iwl-dev.h any more.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 845a9c0d8acea87dede740bc5feb9ec2d00505d9 |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: move all iwl_is_XXX helpers to iwl-shared.h
Logic move after all priv->status moved to struct iwl_shared
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 6ac2f839b0b21225a65f41802c5f0df5eff4f16c |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: priv->mutex moves to iwl_shared
Since it is used by all the layers, it needs to move to iwl_shared.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 63013ae30159c90d2a873e20e680e7810fa533fa |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: priv->status moves to iwl_shared
Since it is used by all the layers, it needs to move to iwl_shared.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 74e28e44095e30ffd2d0258e4fe91826a15247e7 |
|
26-Aug-2011 |
Emmanuel Grumbach <emmanuel.grumbach@intel.com> |
iwlagn: workqueue moves to iwl_shared
Since it is used by all the layers, it needs to move to iwl_shared.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| f38f884b3b291c895d1033f02e351532d1d3f1dc |
|
06-Jun-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlagn: use IWL_DEBUG_TEMP for temperature related debug
Instead of IWL_DEBUG_POWER, IWL_DEBUG_TEMP should be used for temperature
related debug messages
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 901069c71415a76d731857ccda814e18ded062f7 |
|
05-Apr-2011 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlagn: change Copyright to 2011
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 57934dc1fb7ef65a8a0f5d7a1578536b36043c0a |
|
22-Sep-2010 |
Johannes Berg <johannes.berg@intel.com> |
iwlwifi: remove spurious exports
A number of exports, especially related to
thermal throttling, are unnecessary because
the code lives in the same module that it
is used in, so remove them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 7cb1b0887fcc61918e3d64827fbef968bb67a57a |
|
06-Oct-2010 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlagn: reduce redundant parameter definitions
move paramater definitions to a device paramater structure only
leaving the device name, which antennas are used and what firmware
file to use in the iwl_cfg structure. this will not completely
remove the redundancies but greatly reduce them for devices that
only vary by name or antennas. the parameters that are more
likely to change within a given device family are left in iwl_cfg.
also separate bt param structure added to help reduce more.
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 246ed355221076884d225f9d8a4c30a048be8162 |
|
23-Aug-2010 |
Johannes Berg <johannes.berg@intel.com> |
iwlwifi: initial contextification
In order to support multiple interfaces, we must move
a lot of data into per-context structures so we can
use the contexts the device offers. To start with,
this makes a lot of code context-aware, more changes
will move more things into the context structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|
| 0975cc8fbf5b61b188734f2edd9e588c7edff2a1 |
|
31-Jul-2010 |
Wey-Yi Guy <wey-yi.w.guy@intel.com> |
iwlwifi: separate thermal throttling function
"Thermal Throttling" is an advance feature which only available for
newer _agn devices. Move from iwl-core to iwl-agn for better code
organization.
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/iwlwifi/iwl-agn-tt.c
|