| ee40fa0656a730491765545ff7550f3c1ceb0fbc |
|
27-May-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
drivers/net: Add export.h to files using EXPORT_SYMBOL/THIS_MODULE
These were getting the macros from an implicit module.h
include via device.h, but we are planning to clean that up.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c
This relatively recently added file uses EXPORT_SYMBOL and hence
needs export.h included so that it is compatible with the module.h
split up work.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 49fee69204035247fd2a5828863fc6f633e829f2 |
|
21-Jul-2011 |
Daniel Drake <dsd@laptop.org> |
libertas: link mesh device to wiphy
The mesh device is now exposed as an interface of the wiphy.
This exposes the mesh device to the cfg80211 interface, allowing
mesh channel selection to be reimplemented, and available to
NetworkManager as it was before.
Some header tweaking was needed in order to implement lbs_mesh_activated().
Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| a6b7a407865aab9f849dd99a71072b7cd1175116 |
|
06-Jun-2011 |
Alexey Dobriyan <adobriyan@gmail.com> |
net: remove interrupt.h inclusion from netdevice.h
* remove interrupt.g inclusion from netdevice.h -- not needed
* fixup fallout, add interrupt.h and hardirq.h back where needed.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/libertas/rx.c
|
| f3a57fd148a4afd3c38f558c5b44972cb29ea8ba |
|
03-May-2011 |
Joe Perches <joe@perches.com> |
libertas: Use netdev_<level> or dev_<level> where possible
Using the more descriptive logging styles gives a bit
more information about the device being operated on.
Makes the object trivially smaller too.
$ size drivers/net/wireless/libertas/built-in.o.*
187730 2973 38488 229191 37f47 drivers/net/wireless/libertas/built-in.o.new
188195 2973 38488 229656 38118 drivers/net/wireless/libertas/built-in.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 0e4e06ae5e895864b4a4bca7eec2e3015fddca98 |
|
03-May-2011 |
Joe Perches <joe@perches.com> |
libertas: Convert lbs_pr_<level> to pr_<level>
Use the standard pr_<level> functions eases grep a bit.
Added a few missing terminating newlines to messages.
Coalesced long formats.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 8973a6e770fc891f92daacbc1c92c7cd396fcf7e |
|
27-Apr-2011 |
Randy Dunlap <randy.dunlap@oracle.com> |
libertas: use kernel-doc notation, fix comment style
Convert all libertas/ files to use kernel-doc notation instead
of whatever it was (doxygen?).
Add or fix function parameters in several places.
Use expected style for multi-line comments in lots of places.
Remove erroneous /** in multiple places.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 482e039f2a6546ee2ecf718ae6c02e84d1a7f00b |
|
21-Nov-2010 |
Joe Perches <joe@perches.com> |
libertas: Use static const
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.
text data bss dec hex filename
3650 56 704 4410 113a drivers/net/wireless/libertas/rx.o.new
3695 56 704 4455 1167 drivers/net/wireless/libertas/rx.o.old
27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.new
27328 964 5240 33532 82fc drivers/net/wireless/libertas/cfg.o.old
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 05318bc905467237d4aa68a701f6e92a2b332218 |
|
02-Jul-2010 |
David S. Miller <davem@davemloft.net> |
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Conflicts:
drivers/net/wireless/libertas/host.h
|
| e86dc1ca4676445d9f0dfe35104efe0eb8a2f566 |
|
14-Jun-2010 |
Kiran Divekar <dkiran@marvell.com> |
Libertas: cfg80211 support
Holger Schurig's patch (https://patchwork.kernel.org/patch/64286/)
is rebased to latest wireless-testing tree.
(Includes patches from me originally posted as "libertas: fix build
error due to undefined symbol" and "libertas: unmangle capability
value". -- JWL)
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Tested-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| ba2d3587912f82d1ab4367975b1df460db60fb1e |
|
02-Jun-2010 |
Eric Dumazet <eric.dumazet@gmail.com> |
drivers/net: use __packed annotation
cleanup patch.
Use new __packed annotation in drivers/net/
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/libertas/rx.c
|
| c6a6368b32aa4fd145e840c8d8dac6923fae2688 |
|
27-May-2010 |
Prarit Bhargava <prarit@redhat.com> |
libertas: fix uninitialized variable warning
Fixes:
drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet:
drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| a4b770972b8f819e408d7cc3ae9637e15bff62f6 |
|
14-May-2010 |
Joe Perches <joe@perches.com> |
drivers/net: Remove unnecessary returns from void function()s
This patch removes from drivers/net/ all the unnecessary
return; statements that precede the last closing brace of
void functions.
It does not remove the returns that are immediately
preceded by a label as gcc doesn't like that.
It also does not remove null void functions with return.
Done via:
$ grep -rP --include=*.[ch] -l "return;\n}" net/ | \
xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }'
with some cleanups by hand.
Compile tested x86 allmodconfig only.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/libertas/rx.c
|
| 871039f02f8ec4ab2e5e9010718caa8e085786f1 |
|
11-Apr-2010 |
David S. Miller <davem@davemloft.net> |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
drivers/net/stmmac/stmmac_main.c
drivers/net/wireless/wl12xx/wl1271_cmd.c
drivers/net/wireless/wl12xx/wl1271_main.c
drivers/net/wireless/wl12xx/wl1271_spi.c
net/core/ethtool.c
net/mac80211/scan.c
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
/drivers/net/wireless/libertas/rx.c
|
| 819cf15e7cde0a1b0fa4f831478f792434f55679 |
|
11-Mar-2010 |
Stewart Malik <mali0037@gmail.com> |
DRIVER: Libertas: Fixed coding style in rx.c
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| e0e42da3a4df6f487b59dad608db56e25001bcdb |
|
25-Nov-2009 |
Holger Schurig <holgerschurig@gmail.com> |
libertas: moveing mesh-related functions into mesh.c
This moves mesh initialization, start/stop and rx/tx handling from
into mesh.c.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 9e66e701d0e42efd548f0f7249af8a56f8e07b67 |
|
16-Oct-2009 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: cleanup host.h and hostcmd.h
Also remove some unused definitions and make tab usage consistent.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| a2caba6b5fc4e046edfefb1db82f52b939b526a5 |
|
14-Apr-2009 |
John W. Linville <linville@tuxdriver.com> |
libertas: fix warning about %zd:
drivers/net/wireless/libertas/rx.c: In function ‘lbs_process_rxed_packet’:
drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘__le32’
drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 5 has type ‘unsigned int’
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| e45d8e534b67580eedd9b4910ccc16d6dd3cceff |
|
07-Apr-2009 |
Bing Zhao <bzhao@marvell.com> |
libertas: add support for Marvell SD8688 chip
libertas: add support for Marvell SD8688 chip
Use RxPD->pkt_ptr to locate eth803 header in the packet
received since SD8688/v10 firmware allows a gap between
RxPD and eth803 header.
Set SDIO block size to 256 for CMD53.
The maximum block size for SD8688 WLAN function is set
to 512 in TPLFE_MAX_BLK_SIZE. But using 512 as block size
results upto 2K bytes data (4 blocks) being transferred
and causes buffer overflow in firmware.
Both changes above are backward compatible with earlier
firmware versions for SD8385/SD8686.
The SDIO_DEVICE_IDs for SD8688 chip are added in
include/linux/mmc/sdio_ids.h
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 684d6b360222f31b6b9be9a63aa5c6ed5674c890 |
|
25-Mar-2009 |
Bing Zhao <bzhao@marvell.com> |
libertas: support mesh for various firmware versions
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD,
RxPD have been changed in firmware version 10.x.y.z and newer.
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| f54930f363113a9357c9ae008965b6484a61cd29 |
|
07-Apr-2009 |
Philip Rakity <prakity@yahoo.com> |
libertas: don't leak skb on receive error
Don't lead memory when receive errors
Signed-off-by: Philip Rakity <prakity@yahoo.com>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| aae89831df03e5282a8f5c0ee46432cfb677fc5c |
|
13-Mar-2009 |
Johannes Berg <johannes@sipsolutions.net> |
wireless: radiotap updates
Radiotap was updated to include a "bad PLCP" flag and standardise
the "bad FCS" flag in the "flags" rather than "RX flags" field,
this patch updates Linux to that standard.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| bbfc6b788f63f079fb8eeeb8d397bb1c0a8065a1 |
|
20-Mar-2009 |
Stephen Hemminger <shemminger@vyatta.com> |
libertas: convert to internal net_device_stats
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/libertas/rx.c
|
| b700a98c70401c2a48e509b91b47f58a883806bc |
|
27-Oct-2008 |
Sergio Luis <sergio@larces.uece.br> |
libertas: free sk_buff with kfree_skb
free sk_buff with kfree_skb, instead of kree
Signed-off-by: Sergio Luis <sergio@larces.uece.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/libertas/rx.c
|
| 85319f933a703a92652a8f23339f1ec1694cd594 |
|
24-May-2008 |
Javier Cardona <javier@cozybit.com> |
libertas: rate adaptation configuration via iwconfig.
Implemented rate adaptation support via 'iwconfig rate' API. It is now
possible to specify a bit-rate value and append 'auto'. That will configure
rate adaptation to use all bit-rates equal or lower than than selected value.
Made lbs_cmd_802_11_rate_adapt_rateset a direct command.
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 7919b89c8276d657976d4d4d6b7cb58ea1aa08c3 |
|
01-Apr-2008 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: convert libertas driver to use an event/cmdresp queue
This patch (co-developed by Dan Williams and Holger Schurig) uses a kfifo
object for events and a swapping buffer scheme for the command response to
preserve the zero-copy semantics of the CF driver and keep memory usage low.
The main thread should only ever touch the buffer indexed by priv->resp_idx,
while the interface code is free to write to the second buffer, then swap
priv->resp_idx under the driver spinlock. The firmware specs only permit
one in-flight command, so there will only ever be one command response to
process at a time.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| c2b310a73b62f074b0019b940417cafbdbafde41 |
|
26-Mar-2008 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: kill useless #define LBS_MONITOR_OFF 0
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| ae3e0fcf901e4b7df87aef7ab39093e142a8de8b |
|
16-Jan-2008 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas cs/sdio: fix 'NOHZ: local_softirq_pending 08' message
netif_rx should be called only from interrupt context. if_cs and if_sdio receive
packets from other contexts, and thus should call netif_rx_ni.
Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 6f93a8e7e41c2d29749242f983f41e3f6a75b40b |
|
10-Dec-2007 |
David Woodhouse <dwmw2@infradead.org> |
libertas: kill lbs_upload_tx_packet()
It replaces two lines of code. And even for those it has to make
inferences about things (i.e. which device) which the caller would have
just known.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 7bf02c2985ced746f8b8956dbe4b0384edb41846 |
|
10-Dec-2007 |
David Woodhouse <dwmw2@infradead.org> |
libertas: fix error cases in lbs_process_rxed_802_11_packet()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 180be755aec37483337f64bfca3d4b02f5c8fef4 |
|
10-Dec-2007 |
David Woodhouse <dwmw2@infradead.org> |
libertas: remove unreachable code from process_rxed_802_11_packet()
The function is only ever called if we're in rtap mode. So the bit in it
which is conditional on rtap mode seems a little superfluous.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| aa21c004f80bdf943736c62dccf0c0398d7824f3 |
|
08-Dec-2007 |
David Woodhouse <dwmw2@infradead.org> |
libertas: kill struct lbs_adapter
There seems to be no reason for a separate structure; move it all
into struct lbs_private.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 9088566176cb7f7361e862557eb20adfdd1bfc1f |
|
06-Dec-2007 |
David Woodhouse <dwmw2@infradead.org> |
libertas: Don't claim to have checksummed incoming packets.
This explains why we never noticed the corruption of checksums on
outgoing packets... we weren't actually checking them either.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 69f9032d9dfeb763b467fdbe8cf5938f5457083a |
|
23-Nov-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: remove arbitrary typedefs
New typedefs are usually frowned upon. This patch changes
libertas_adapter -> struct libertas_adapter
libertas_priv -> struct libertas_priv
While passing, make everything checkpatch.pl-clean that gets touches.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 1007832103d016d1563fab71d4cf2b057a0bcceb |
|
16-Nov-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
libertas: move to uniform lbs_/LBS_ namespace
This patch unifies the namespace of variables, functions defines
and structures. It does:
- rename libertas_XXX to lbs_XXX
- rename LIBERTAS_XXX to lbs_XXX
- rename wlan_XXX to lbs_XXX
- rename WLAN_XXX to LBS_XXX (but only those that were
defined in libertas-local *.h files, e.g. not defines
from net/ieee80211.h)
While passing, I fixed some checkpatch.pl errors too.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 8362cd413e8116306fafbaf414f0419db0595142 |
|
03-Aug-2007 |
Dan Williams <dcbw@redhat.com> |
[PATCH] libertas: fix sparse-reported problems
A few fields being converted to the wrong sized type, and a few missed
endian conversions.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 965f8bbc6c92233600b176f4c80299f6766df9bd |
|
02-Aug-2007 |
Luis Carlos Cobo <luisca@cozybit.com> |
[PATCH] libertas: monitor mode support for OLPC firmware
Driver support for the monitor mode support that will be available in the next
OLPC 'bleeding edge' Marvell firmware release (most likely, 5.110.16.p2).
To activate monitor mode,
echo mode > /sys/class/net/{ethX,mshX}/device/libertas_rtap
where mode is the hex mask that specifies which frames to sniff (in short, 0x1
for data, 0x2 for all management but beacons, 0x4 for beacons). Any non zero
mode will activate the monitor mode, inhibiting transmission in ethX and mshX
interfaces and routing all the incoming traffic to a new rtapX interface that
will output the packets in 802.11+radiotap headers format.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| a783f1ee5b112a0258762877ec7c1ce8810f3cd8 |
|
02-Aug-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: remove adapter->{data,bcn}_avg_factor
Those two variables were initialized with some default values, but there
is no code that would ever change them. So we could use as well the defaults
directly.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| caef47a0dc2b17ea6fb0119d3678b4b21ae70daa |
|
02-Aug-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: remove adapter->rxpd_rate
No code uses the contents of this variable, so it can go.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| ece561919326236c7fb791a5e883f0eb76af029e |
|
02-Aug-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: make the hex dumper nicer
Currently, when you define LBS_DEB_HEX, you get every hex dump in the
whole driver, e.g. for LBS_DEB_CMD, LBS_DEB_RX, LBS_DEB_TX etc. This
patch makes sure that you only get the hexdump that you're interested in.
Renamed lbs_dbg_hex() into lbs_deb_hex(), like the other lbs_deb_XXX()
macros.
Made lbs_deb_hex() issue a line feed (and a new prompt) after 16 bytes.
As lbs_deb_hex() now prints the ":" after the prompt by itself, removed
the misc colons in the various *.c files.
lbs_deb_XXX() now print the debug category as well.
As lbs_deb_XXX() --- and especially lbs_deb_11d() --- now print the
category, I removed various "11D:" prefixes in 11d.c as well.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| f455eb1a4ba2bf0ff1bde7844bf3a811269d2d79 |
|
02-Aug-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: remove debugmode
There is nowhere any place that set's this variable.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 8c5127657549d055ac9d709cdea73902a6ef392c |
|
02-Aug-2007 |
Dan Williams <dcbw@redhat.com> |
[PATCH] libertas: simplify and clean up data rate handling
Remove unused/duplicated fields and consolidate static data rate arrays,
for example the libertas_supported_rates[] and datarates[] arrays in
the bss_descriptor structure, and the libertas_supported_rates field
in the wlan_adapter structure.
Introduce libertas_fw_index_to_data_rate and libertas_data_rate_to_fw_index
functions and use them everywhere firmware requires a rate index rather
than a rate array.
The firmware requires the 4 basic rates to have the MSB set, but most
other stuff doesn't, like WEXT and mesh ioctls. Therefore, only set the MSB
on basic rates when pushing rate arrays to firmware instead of doing a ton
of (rate & 0x7f) everywhere.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| d082b9b5c6edf2e1d241af4630f12f0e5e2d2377 |
|
02-Jul-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: fix use-after-free in rx path
... by removing an ill-conceived, useless line. Discovered by coverity.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 2fb3bd6a23e5d37889a78b6a13a124fa7c586009 |
|
05-Jun-2007 |
Dan Williams <dcbw@redhat.com> |
[PATCH] libertas: actually send mesh frames to mesh netdev
Found by Luis; got broken during module split.
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 981f187b7c4b237011d4175cae0120d5d203c0fd |
|
26-May-2007 |
David Woodhouse <dwmw2@infradead.org> |
[PATCH] libertas: first pass at fixing up endianness issues
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 634b8f49c11f49272b09d13a34b22a17b8c3d419 |
|
25-May-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: remove unused variables in wlan_dev_t
Actually, this patch removev wlan_dev_t totally and puts the used variables
of it directly into wlan_private. That reduces one level of indirection and
looks a little bit simpler. It's now "priv->card" and not
"priv->wlan_dev.card" and "priv->dev" instead of "priv->wlan_dev.netdev"
Changed two occurences of "((wlan_private *) dev->priv)->wlan_dev.netdev"
into "dev", because I didn't see the point in doing pointer-ping-pong.
The variables "ioport", "upld_rcv" and "upld_type" where unused. They have
been removed.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 084708b61014776198c56d1606343d4f504c691e |
|
25-May-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: split module into two (libertas.ko and usb8xxx.ko)
* add CONFIG_LIBERTAS to Kconfig
* remove global variable libertas_fw_name, the USB module might want to
use a different default FW name than the CF module, so libertas_fw_name
is now local to if_usb.c
* exported some symbols as GPL
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 78523daa86cf0b02c4d2f73b962c04ad565e9140 |
|
25-May-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: single out mesh code
This patches adds the two functions wlan_add_mesh() and wlan_remove_mesh(),
which are responsible for the mshX interface. In a CF driver with a non-
mesh-aware firmware you can omit the calls to this functions.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 9012b28a407511fb355f6d2176a12d4653489672 |
|
25-May-2007 |
Holger Schurig <hs4233@mail.mn-solutions.de> |
[PATCH] libertas: make debug configurable
The debug output of libertas was either not present or it was overwhelming.
This patch adds the possibility to specify a bitmask for the area of
interest. One should then only get the desired output.
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 412e8a0ebf1a58c060cc76438e5b6d33789c5e20 |
|
21-May-2007 |
Eugene Teo <eugeneteo@kernel.sg> |
[PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-free
skb could have been freed by then. Also, in libertas_upload_rx_packet(),
skb->protocol is initialized by eth_type_trans().
Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 3d4bd24b019981394fabb465b0c7932924b83d65 |
|
18-May-2007 |
Florin Malita <fmalita@gmail.com> |
[PATCH] libertas: skb dereferenced after netif_rx
In libertas_process_rxed_packet() and process_rxed_802_11_packet() the
skb is dereferenced after being passed to netif_rx (called from
libertas_upload_rx_packet). Spotted by Coverity (1658, 1659).
Also, libertas_upload_rx_packet() unconditionally returns 0 so the error
check is dead code - might as well take it out and change the signature.
Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 4269e2ad83036e1d8c076b1f1348f879a93be008 |
|
11-May-2007 |
Dan Williams <dcbw@redhat.com> |
[PATCH] libertas: 64-bit cleanups
Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|
| 876c9d3aeb989cf1961f2c228d309ba5dcfb1172 |
|
10-Feb-2007 |
Marcelo Tosatti <marcelo@kvack.org> |
[PATCH] Marvell Libertas 8388 802.11b/g USB driver
Add the Marvell Libertas 8388 802.11 USB driver.
Signed-off-by: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/libertas/rx.c
|