| e01ae27f8ce6bd3ee26ef33c704f62449ce8233b |
|
18-Apr-2011 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Allow dynamic addition of PCI/USB IDs.
Both USB and PCI drivers allow a system administrator to dynamically add
USB/PCI IDs to the device table that a driver supports via the
/sys/bus/{usb,pci,pci_express}/drivers/<driver-name>/new_id files.
However, for the rt2x00 drivers using this method currently crashes the
system with a NULL pointer failure.
This is due to the set-up of rt2x00 where the probe functions require a
rt2x00_ops structure in the driver_info field of the probed device. As
this field is empty for the dynamically added devices this fails for
these devices.
Fix this by introducing driver-specific probe wrappers that do nothing
but calling the bus-specific probe functions with the rt2x00_ops structure
as an argument, rather than depending on the driver_info field.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 152a599274b15028604e24ae2d9c9d7f49853977 |
|
18-Apr-2011 |
Ivo van Doorn <IvDoorn@gmail.com> |
rt2x00: Decrease association time for USB devices
When powersaving is enabled, assocaition times are very high
(for WPA2 networks, the time can easily be around the 3 seconds).
This is caused, because the flushing of the queues takes
too much time. Without the flushing callback mac80211 assumes
a timeout of 100ms while scanning. Limit all flush waiting
loops to the same maximum.
We can apply this maximum by passing the drop status to the
driver, which makes sure the driver performs extra actions
during the waiting for the queue to become empty.
After these changes, association times fall within the
healthy range of ~0.6 seconds with powersaving enabled.
The difference between association time between powersaving
enabled and disabled is now only ~0.1 second (which can also
be due to the measuring method).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 166389375d5a3894aa00a9c2e490ac4b9af2a891 |
|
28-Mar-2011 |
Helmut Schaa <helmut.schaa@googlemail.com> |
rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once
Instead of receiving an unlimited number of frames, stop after 16
entries and reschedule the rxdone tasklet. This allows other tasklets
to be run inbetween.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 412b31334b831a8c2909afaca017c5a236ac2dd0 |
|
13-Dec-2010 |
Wolfgang Kufner <wolfgang.kufner@gmail.com> |
rt2x00: Fix firmware loading regression on x86_64.
Commit 6175ddf06b6172046a329e3abfd9c901a43efd2e changes the way
memcpy_toio() works for x86_64, causing firmware loading to fail for
some Ralink WLAN devices with the rt2800pci driver since linux 2.6.34.
This causes the log message: "phy0 -> rt2800pci_load_firmware: Error -
PBF system register not ready.".
Fix this by using __iowrite32_copy instead of memcpy_toio().
Signed-off-by: Wolfgang Kufner <wolfgang.kufner@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| e513a0b6f1bf8e1b59b0e1382d4e7ef3d344d535 |
|
29-Jun-2010 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Move common txdone handling to rt2x00lib_txdone.
Now that the write_tx_data functions are merged, also merge the relevant
parts of the txdone handling into common code, rather than {usb,pci}
specific code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 78eea11b0e6ae5771bc19cc46984f1cdcbbb6ba1 |
|
29-Jun-2010 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Merge PCI and USB versions of write_tx_data into single function.
Now that rt2x00pci_write_tx_data and rt2x00usb_write_tx_data are similar
we can merge them in a single function in rt2x00queue.c.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 0b8004aa12d13ec750d102ba4082a95f0107c649 |
|
03-Jun-2010 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Properly reserve room for descriptors in skbs.
Instead of fiddling with the skb->data pointer and thereby risking
out of bounds accesses, properly reserve the space needed in an
skb for descriptors.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 410866930ea1929b0fdfb533dd84ddaa234b06e4 |
|
15-Apr-2010 |
Helmut Schaa <helmut.schaa@googlemail.com> |
rt2x00: add txdesc parameter to write_tx_data
Extend the write_tx_data callback with a txdesc parameter to allow
access to the tx desciptor while preparing the tx data.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 714fa6636331d33c6045efe394f36c964a6c14ee |
|
13-Feb-2010 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Reorganize RT chipset setting for PCI/SOC devices.
Don't set the RT chipset for a device from within the generic PCI/SOC code,
but rather from the individual drivers, so that individual drivers have
more control over what RT chipset is set.
Preparation for chip handling updates for rt2800 devices.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 9c9a0d145fee73b5e821bb460732ac2a66c680b3 |
|
08-Nov-2009 |
Gertjan van Wingerde <gwingerde@gmail.com> |
rt2x00: Update copyright statements.
As mentioned on the linux-wireless mailing list, the current copyright
statements in the rt2x00 are meaningless, as the rt2x00 project is
not even a formal legal entity. Therefore it is better to replace
the existing copyright statements with copyright statements for the
people that actually wrote the code.
Note: Updated to the best of my knowledge with respect to who
contributed considerable amounts of code.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 1f285f1423e456cfa14331987782edeca64d8e70 |
|
04-Nov-2009 |
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> |
rt2x00: move REGISTER_BUSY_* definitions to rt2x00.h
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 473196bd9935f0efd4c5f1cda28229e7dcff564c |
|
04-Nov-2009 |
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> |
rt2x00: fix rt2x00pci_register_multi[read,write]() arguments
Change type of 'length' argument from u16 to u32 (all arguments
match rt2x00usb_register_multi[read,write]() ones now).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 4e54c711b42c3cc8da8a3fdcde3407b86d67ebcc |
|
17-Jan-2009 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Update copyright year to 2009
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| c9c3b1a5deac4297503145840fffcd122b253db5 |
|
10-Nov-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Cleanup indirect register access
All code which accessed indirect registers was similar
in respect to the for-loop, the given timeout, etc.
Move it into a seperate function, which for PCI drivers
can be moved into rt2x00pci.
This allows us to cleanup the cleanup the code further
by removing the goto statementsand making the codepath
look a bit nicer.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 798b7adb4ed3533ab1282f51d16892034cfd8aae |
|
08-Nov-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Cleanup TX/RX entry handling
Merge the callback functions init_txentry() and
init_rxentry(). This makes life in rt2x00lib a
lot simpler and we can cleanup several functions.
rt2x00pci contained "fake" FIELD definitions for
descriptor words. This is not flexible since it
assumes the driver will always have the same field
to indicate if a driver is available or not.
This should be dependent on the driver, and we
should add a callback function for this.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 743b97caf98036ec8ee4bfc6fc6f85ad94e04783 |
|
29-Oct-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Remove debugfs CSR access wrappers
Move calculation of CSR register offset into rt2x00debug.c
and remove the wrapper functions from each individual driver.
(Except rt2500usb, which still needs to wrap for the
different value type argument).
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 49997d75152b3d23c53b0fa730599f2f74c92c65 |
|
18-Jul-2008 |
David S. Miller <davem@davemloft.net> |
Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:
Documentation/powerpc/booting-without-of.txt
drivers/atm/Makefile
drivers/net/fs_enet/fs_enet-main.c
drivers/pci/pci-acpi.c
net/8021q/vlan.c
net/iucv/iucv.c
|
| f160ebcbeb6c9b79a770f22e14398158dac3de00 |
|
24-May-2008 |
David Woodhouse <dwmw2@infradead.org> |
rt2x00: treat firmware data as const
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| d74f5ba473b915e5d4ea1ed391984bb62d9de8b1 |
|
16-Jun-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Cleanup symbol exports
With a bit of code moving to rt2x00lib within the
TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL()
statements. This cleans up the interface between rt2x00lib
and the drivers and has the additional benefit that rt2x00pci
and rt2x00usb are trimmed down in size as well since they
have less to do.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| c4da004857056e6ee034c4110ccdcba659077b7e |
|
16-Jun-2008 |
Gertjan van Wingerde <gwingerde@kpnplanet.nl> |
rt2x00: Replace statically allocated DMA buffers with mapped skb's.
The current PCI drivers require a lot of pre-allocated DMA buffers. Reduce this
by using dynamically mapped skb's (using pci_map_single) instead of the pre-
allocated DMA buffers that are allocated at device start-up time.
At the same time move common RX path code into rt2x00lib from rt2x00pci and
rt2x00usb, as the RX paths now are now almost the same.
Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 6db3786aee36b32e5ed072ed67fad6d5341b0991 |
|
06-Jun-2008 |
Ivo van Doorn <IvDoorn@gmail.com> |
rt2x00: Move generic TX frame writing code into rt2x00queue
The write_tx_data functions in rt2x00pci and rt2x00usb have
a lot in common. This moves that duplicate code into
rt2x00queue_write_tx_frame().
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| e039fa4a4195ac4ee895e6f3d1334beed63256fe |
|
15-May-2008 |
Johannes Berg <johannes@sipsolutions.net> |
mac80211: move TX info into skb->cb
This patch converts mac80211 and all drivers to have transmit
information and status in skb->cb rather than allocating extra
memory for it and copying all the data around. To make it fit,
a union is used where only data that is necessary for all steps
is kept outside of the union.
A number of fixes were done by Ivo, as well as the rt2x00 part
of this patch.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| b8be63ffa5dc44324e7f507997870fa3e4b17619 |
|
10-May-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Merge RX and TX entry private data
With the pending removal of the tx_control structure
we can merge the RX and TX entry private data structure
in advance. This will temporarily increase the required
memory for the queue, but that overhead will only be limited.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 9a46d44eda55ad87a727fe351b0ab27c23d4555c |
|
21-Apr-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Fix kernel-doc
Add missing kernel-doc variables for structures/functions.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 30b3a23c2594e122e7086f97b5252a87eaf8a817 |
|
17-Feb-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Fix Descriptor DMA initialization
As Adam Baker reported the DMA address for the
descriptor base was incorrectly initialized in
the PCI drivers.
Instead of the DMA base for the descriptor, the
DMA base for the data was passed resulting in a
broken TX/RX state for PCI drivers.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 21795094e2b71b4b11bfb468321046c1336cef69 |
|
10-Feb-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: make csr_cache and csr_addr an union
The csr_cache and csr_addr pointers are both the same size
and they are never used both by the same driver. This makes
them a nice candidate for an union.
We could merge into 1 pointer, but that would either upset sparse,
or require a lot of __force casts.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 5957da4c6e67a5447e75c2ad65252fdd5e22f9d0 |
|
03-Feb-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Move beacon and atim queue defines into rt2x00
As Johannes Berg indicated the BEACON and AFTER_BEACON
queue indeces in mac80211 should be removed because they
are too hardware specific. This patch adds the queue index
defines into rt2x00queue.h and removes the dependency of
the defines inside mac80211.h.
Also move rt2x00pci_beacon_update() into rt2400pci and
rt2500pci individually since it is no longer a generic
function since rt61 and rt2800 no longer use that.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 181d6902b6bad978d157e69479c95cc0ff213a76 |
|
05-Feb-2008 |
Ivo van Doorn <IvDoorn@gmail.com> |
rt2x00: Queue handling overhaul
This introduces a big queue handling overhaul, this also
renames "ring" to "queues".
Move queue handling into rt2x00queue.c and the matching header,
use Kerneldoc to improve rt2x00 library documentation.
Access to the queues is now protected under a spinlock, this
to prevent race conditions which could corrupt the indexing
system of the queue.
Each queue entry allocates x bytes for driver/device specific data,
this cleans up the queue structure significantly and improves
code readability.
rt2500usb no longer needs 2 entries in the beacon queue to correctly
send out the guardian byte. This is now handled in the entry specific
structure.
rt61 and rt73 now use the correct descriptor size for beacon frames,
since this data is written into the registers not the entire TXD
descriptor was used but instead of a subset of it named TXINFO.
Finally this also fixes numerous other bugs related to incorrect
beacon handling or beacon related code.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 811aa9cad1bd927999888ab56ed9592519d2fef6 |
|
03-Feb-2008 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Update copyright notice
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 3957ccb56e17ca839265ccb292c4c6850dcf5d32 |
|
12-Nov-2007 |
Ivo van Doorn <ivdoorn@gmail.com> |
rt2x00: Move duplicate code into rt2x00pci_txdone()
rt2400pci, rt2500pci and rt61 require different
txdone handling, but the code that pushes the frame
upstream and cleans up the entry is identical to
all of them.
This will create the function rt2x00pci_txdone()
to remove the duplicate code.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 0e14f6d3e088473b411d35ff63737e46efb9e6df |
|
27-Oct-2007 |
Adam Baker <linux@baker-net.org.uk> |
rt2x00: Unconstify rt2x00dev
Some register accesses need rt2x00dev to be non-const
they all need modifying so the prototype is consistent.
Signed-off-by: Adam Baker <linux@baker-net.org.uk>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|
| 95ea36275f3c9a1d3d04c217b4b576c657c4e70e |
|
26-Sep-2007 |
Ivo van Doorn <IvDoorn@gmail.com> |
[RT2x00]: add driver for Ralink wireless hardware
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
/drivers/net/wireless/rt2x00/rt2x00pci.h
|