| 733a95bd39d79c5759c1f7016a94c08e7367076d |
|
09-Feb-2012 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Remove EDC sysfs interface.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| af11f64dfd634e8116b7c4e2422e0e0c698b91c1 |
|
09-Feb-2012 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Perform implicit logout during rport tear-down.
During rport tear-down, make sure we do an implicit LOGO of the fcport in our
firmware to try to clear any residual commands associated with that fcport.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| aa61556fa3cf7d0e39a67dc5b043b96519ce3726 |
|
09-Feb-2012 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure.
When thermal temperature initially fails, return a blank string to the
sysfs interface. This fixes the initial display of 0.00 followed by
subsequent display of blank line; the initial 0.00 should have not
displayed for cards that do not support thermal temperature.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 18f509dfa21a69b8de4145edc794172ed55a84a5 |
|
09-Feb-2012 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Correct print format for edc ql_log() calls.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6246b8a1d26c7cdb77fd2f3f3578d4db025d5c9e |
|
09-Feb-2012 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Enhancements to support ISP83xx.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d051a5aa1c234c8de01fc0a488b1a18d65246150 |
|
09-Feb-2012 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add an "is reset active" helper.
Many locations within the driver would use an inconsistent set of
checks to determine ISP-reset state. Consolidate the checks into
this inline-helper.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 71dfe9e776878d9583d004edade55edc2bdac5eb |
|
18-Nov-2011 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Corrections to returned sysfs error codes.
Correct the erroneous return codes introduced by the following patch:
"Return sysfs error codes appropriate to conditions".
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| cfb0919c12a33132f75fb91971bbd8bdd44ebb90 |
|
18-Nov-2011 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Update to dynamic logging.
This patch contains minor fixes to our new logging infrastructure:
- Remove extranous messages.
- Re-add 'nexus' and 'hdl' information.
- Adjusted the message ids to fill up the holes.
- Display FCP_CMND priority on update.
- Log only mail box error conditions.
- Do not print "Firmware ready **** FAILED ****" if cable is unplugged.
- Drop noisy 'fw_state...curr time...' message.
- Correct nexus display during abort.
- Add a special case error-logging set to '1'.
- Catagorize I/O exception display handling.
- Correct the bsg msg code printing.
- Dont use dynamic logging after host is removed.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d8424f68c0160c45c446e56cb586fd8b9c538a1a |
|
18-Nov-2011 |
Joe Perches <joe@perches.com> |
[SCSI] qla2xxx: Make the logging functions verify their arguments and fixed the current broken uses as appropriate.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 49e85c23beb1f12aba59450126ff7e803fbc767d |
|
18-Nov-2011 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Correct fc_host port_state display.
[jejb: checkpatch fixes]
Add more fine grain parsing of vha->loop_state to export a more accurate
fc_host port_state.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| b668ae37f10e5cefe65303150867e3fa2e631b93 |
|
16-Aug-2011 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Return sysfs error codes appropriate to conditions.
Return sysfs error codes that match the conditions encountered.
This prevents sysfs from retrying a request which is conditioned
to fail under the current circumstance.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1fedd80f9c2e1da9e6c2fa6a1b75ad077c70f291 |
|
16-Aug-2011 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Correction to sysfs edc interface.
Corrects the return value for the cases where read/write edc fails;
this prevents sysfs from retrying the operation until forever.
Corrects the printk width specifier for the first byte of buf.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 08de2844c626511cfd1db9c36e5e7d126707f780 |
|
16-Aug-2011 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Add support for ISP82xx to capture dump (minidump) on failure.
Minidump allows us to catpure a snapshot of the firmware/hardware states at the
time of failure for further analysis.
[jejb: added missing #include <linux/vmalloc.h>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> ]
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| e02587d777bfb398f70709fd3a92fa0154959003 |
|
16-Aug-2011 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF - Fix incorrect error reporting.
This fix:
- Disables app tag peeking; correct tag check will be added when the
SCSI API is available.
- Always derive ref_tag from scsi_get_lba()
- Removes incorrect swap of FCP_LUN in FCP_CMND
- Moves app-tag error check before ref-tag check. The reason being,
currently there is no interface in SCSI to retrieve the app-tag
for protection I/Os, so driver puts zero for app-tag in the
firmware interface, but requests not to validate it, but when a
ref-tag error is detected by firmware, it would put
expected/actual tags for all the protection tags (guard/app/ref).
As driver checks for app tag error first, a ref-tag error is
incorrectly flagged as app-tag error.
- Convert HBA specific checks to capability based.
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8cb2049c744809193ed3707a37c09676a24599ee |
|
16-Aug-2011 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF - Handle uninitalized sectors.
Driver needs to update protection bytes for uninitialized sectors as they are
not DMA-d.
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Reviewed-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7c3df1320e5e875478775e78d01a09aee96b8abe |
|
14-Jul-2011 |
Saurav Kashyap <saurav.kashyap@qlogic.com> |
[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.
The code is changed to support the new dynamic logging infrastructure.
Following are the levels added.
Default is 0 - no logging. 0x40000000 - Module Init & Probe.
0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.
0x08000000 - IO tracing. 0x04000000 - DPC Thread.
0x02000000 - Async events. 0x01000000 - Timer routines.
0x00800000 - User space. 0x00400000 - Task Management.
0x00200000 - AER/EEH. 0x00100000 - Multi Q.
0x00080000 - P3P Specific. 0x00040000 - Virtual Port.
0x00020000 - Buffer Dump. 0x00010000 - Misc.
0x7fffffff - For enabling all logs, can be too many logs.
Setting ql2xextended_error_logging module parameter to any of the above
value, will enable the debug for that particular level.
Do LOGICAL OR of the value to enable more than one level.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6766df9e8ae2ab29459381ade1ca91b28688ab13 |
|
10-May-2011 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Unify the read/write sfp mailbox command routines.
Make the read/write sfp mailbox command routines uniform, and remove redundancy.
Also protect against attempting to do a single byte dma in these routines.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 93d29cc63f1832dbbbab721cce1b9f845becf4d7 |
|
10-May-2011 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Correct buffer start in edc sysfs debug print.
The debug print prints the first byte of the buffer which is buf[8].
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 9f40682e2857a3c2ddb80a87b185af3c6a708346 |
|
10-May-2011 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: Fix vport delete hang when logins are outstanding.
Timer is required to flush out entries that may be present in work queues.
Cc: stable@kernel.org
Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ec426e106c410b000ac590b6e776d5a6cd9bccd9 |
|
30-Mar-2011 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Log fcport state transitions when debug messages are enabled.
Add the inline function qla2x00_set_port_state() so that when a fcport state
transition happens we can log the state transition if debug messages are
enabled.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 07e264b76d1db5794614ca3d726fdf1c0399dac0 |
|
30-Mar-2011 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 044d78e1acb6614f5d79040e490f1fd9bfa45487 |
|
29-Jan-2011 |
Madhuranath Iyengar <Madhu.Iyengar@qlogic.com> |
[SCSI] qla2xxx: Change from irq to irqsave with host_lock
Make the driver safer by using irqsave/irqrestore with host_lock.
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 794a5691147652387f4a2ffa890c5c1983e38849 |
|
22-Dec-2010 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add sysfs node for displaying board temperature.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 38170fa8e66bb75fe806bdc91657732aef0eae90 |
|
15-Oct-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Avoid depending on SCSI host_lock in queuecommand function.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1e6d0670921ea4e736b172e9a3c32a2ba0c33f6a |
|
15-Oct-2010 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Remove port down retry count.
This patch removes the use of the port down retry counter as a mechanism to
update a fcport state. The internal driver counter is a residual carry-over
from pre-FC-transport aware driver inteaction. The ql2xport_down_retry module
parameter and NVRAM set ha->port_down_retry_count remain in order to seed the
fc-host's default dev-loss-tmo.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| c70b5296e775cde46cfcb2d860ba160108a5ec7a |
|
23-Oct-2010 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (84 commits)
[SCSI] be2iscsi: SGE Len == 64K
[SCSI] be2iscsi: Remove premature free of cid
[SCSI] be2iscsi: More time for FW
[SCSI] libsas: fix bug for vacant phy
[SCSI] sd: Fix overflow with big physical blocks
[SCSI] st: add MTWEOFI to write filemarks without flushing drive buffer
[SCSI] libsas: Don't issue commands to devices that have been hot-removed
[SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
[SCSI] lpfc 8.3.17: Update lpfc driver version to 8.3.17
[SCSI] lpfc 8.3.17: Replace function reset methodology
[SCSI] lpfc 8.3.17: SCSI fixes
[SCSI] lpfc 8.3.17: BSG fixes
[SCSI] lpfc 8.3.17: SLI Additions and Fixes
[SCSI] lpfc 8.3.17: Code Cleanup and Locking fixes
[SCSI] zfcp: Remove scsi_cmnd->serial_number from debug traces
[SCSI] ipr: fix array error logging
[SCSI] aha152x: enable PCMCIA on 64bit
[SCSI] scsi_dh_alua: Handle all states correctly
[SCSI] cxgb4i: connection and ddp setting update
[SCSI] cxgb3i: fixed connection over vlan
...
|
| d2b5f10e5b93633a40d9263383b914f06019f00b |
|
15-Sep-2010 |
Mike Christie <michaelc@cs.wisc.edu> |
[SCSI] qla2xxx: prep for fc host dev loss tmo support
This removes the driver's get_host_def_dev_loss_tmo
callback and just has the driver set the dev loss
using the fc class fc_host_dev_loss_tmo macro like is
done for other fc params.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 3fadb80b0f39b193caafeed615a219aae57279fe |
|
04-Sep-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Clear local references of rport on device loss timeout notification from FC transport.
The clearing of local references to rport was blocked when abort is
active. This code clears the local references unconditionaly upon
device loss timeout callback from FC transport.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 35e0cbd4b282e541d05ca21694beb26c087bb49e |
|
04-Sep-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Return proper fabric name based on device state.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| feafb7b1714cf599a6d0fed45801ab3f66046cbd |
|
03-Sep-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: Fix vport delete issues
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a74bdf4661441d79a700f7ab3fc6d225ea2cf409 |
|
06-Aug-2010 |
Mike Christie <michaelc@cs.wisc.edu> |
[SCSI] qla2xxx: do not reset dev_loss_tmo in slave callout
This fixes a bug where the driver was resetting the
rport dev_loss_tmo when devices were added by adding
support for the get_host_def_dev_loss_tmo callout.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 0c470874858e0075f420dcfb3c3570b2057de275 |
|
23-Jul-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF Type 2 support
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| de7c5d059dbd245ad80011725f9c86f560e61fff |
|
23-Jul-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8867048b486a64125b62f93af13a379d6d575ee2 |
|
23-Jul-2010 |
Chad Dupuis <chad.dupuis@qlogic.com> |
[SCSI] qla2xxx: Add qla2x00_free_fcports() function
This function was added to encapsulate freeing the memory for all the fcports
associated with a particular vha. Also added a call to qla2x00_free_fcports()
to qla2x00_free_device() to free the memory for all the fcports associated with
a vha during device removal.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 0f2d962f4d120e93b4d74d13c2e8038e9e4358b9 |
|
23-Jul-2010 |
Madhuranath Iyengar <madhuranath.iyengar@qlogic.com> |
[SCSI] qla2xxx: Check for golden firmware and show version if available
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6c7ccf7bb96a0ae16d2bcc6155e1d1fc3e728b39 |
|
29-May-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Removed redundant check for ISP 84xx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ba77ef53547883b6be06c0657d5dc1642ad43d0c |
|
29-May-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF enablement for 81XX
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2c3c8bea608866d8bd9dcf92657d57fdcac011c5 |
|
13-May-2010 |
Chris Wright <chrisw@sous-sol.org> |
sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 86fbee86e94c7e80c9bb01db0cf68b7977462109 |
|
05-May-2010 |
Lalit Chandivade <lalit.chandivade@qlogic.com> |
[SCSI] qla2xxx: ensure flash operation and host reset via sg_reset are mutually exclusive
The problem occurring is a hw-race where there's an outstanding read-flash
operation occurring while the chip is being reset (done via an sg_reset script).
After the chip is paused, the read-flash operation never completes and the
DPC thread, while trying to complete the reset, is never able to recover,
as the HW appears to be hung...
The fix is to wait for outstanding flash operation prior to doing a sg_reset -h.
And to wait for reset to complete before any flash operations.
Note, during the wait, if any of the operation (reset/flash) does not complete,
failure is returned to the upper layer. The upper layer either need to
fail or retry.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bad750028917a7b804623701d0674e46c6012c18 |
|
05-May-2010 |
Arun Easi <arun.easi@qlogic.com> |
[SCSI] qla2xxx: T10 DIF support added.
Signed-off-by: Duane Grigsby <duane.grigsby@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 62542f4b05a4515ff75320600ffeb2e7447d25fe |
|
05-May-2010 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Display proper link state for disconnected ports.
With qla2xxx using mid-layer async-scsi-scanning, the link state for
disconnected port is displayed wrong. Additional check for cable presence
is considered to display proper link state.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 0b9dae6aeb0e5397b426e135509046b323740fd5 |
|
05-May-2010 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Check for ISP84xx before processing to get 84xx firmware version.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a9083016a5314b3aeba6e0d2e814872e72168c08 |
|
13-Apr-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Add ISP82XX support.
Enhanced the driver to support new FCoE host bus adapter.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6c452a45e5d8a93812360a5581e93ac5a8776025 |
|
20-Mar-2010 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: General checkpatch corrections.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6e98016ca077c5c751167bfdb1a3a2a3bee581cf |
|
20-Mar-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Re-organized BSG interface specific code.
1. Segregate BSG interface specific code to new files.
2. Handle multiple vendor specific commands indepedently.
3. Reorganised support for reset, management and update FCoE firmware commands.
4. Fixed memory leak issue in Loopback.
5. Added new vendor command to support iiDMA using BSG interface.
6. Proper cleanup of dma mapped and dma allocated buffers for BSG request.
[jejb: fix up conflict and merge in Jiri Slaby lock imbalance patch]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bc0beb44f27dc068c1daefc79826c07e0b22ef6c |
|
16-Mar-2010 |
Jiri Slaby <jslaby@suse.cz> |
[SCSI] qla2xxx: fix lock imbalance
Stanse found that one error path in qla24xx_bsg_timeout omits to
unlock ha->hardware_lock. Fix that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7da23b86e14b77c094b11a9fa5ef5b3758fc9193 |
|
06-Apr-2010 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] qla1280: retain firmware for error recovery
[SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init
[SCSI] advansys: fix regression with request_firmware change
[SCSI] qla2xxx: Updated version number to 8.03.02-k2.
[SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
[SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.
[SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time.
[SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.
[SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.
[SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline
[SCSI] libiscsi: Fix recovery slowdown regression
|
| 5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d6136f3f749cf68c3295c883cea612afd9919100 |
|
20-Mar-2010 |
Santosh Vernekar <santosh.vernekar@qlogic.com> |
[SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.
The fix prevents application path from sending get-firmware-state mbx command
during as isp reset.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 715848ca6fffeb6362a50887d9c26245bd5dfba9 |
|
18-Feb-2010 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct use-after-free issue in terminate_rport_io callback.
The explicit logout (LOGO) issued at the end of the callback will
flush (via normal scsi_cmnd->done()) any outstanding commands
(FCP2) the firmware is holding. While iterating through the
outstanding_cmnd array in qla2x00_abort_fcport_cmds(), locking
and unlocking of the hardware spinlock, opens-up the driver to
cases where the processed SRB (sp) could be used after the
command completed from interrupt context.
Cc: stable@kernel.org
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| db3ad7f8852cfdfa03f72b27472e5a8bc9c1e1cf |
|
18-Feb-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Proper clean-up of BSG requests when request times out.
Fix for BSG request cleanup when the request timesout.
Proper release of driver resources used for BSG request during timeout cleanup.
Cc: stable@kernel.org
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 236b0249c2274cd24bc98a1fbbb5e78d861d4bd9 |
|
18-Feb-2010 |
Sarang Radke <sarang.radke@qlogic.com> |
[SCSI] qla2xxx: Initialize payload receive length in failure path of vendor commands
Since bsg_job->reply->reply_payload_rcv_len is uninitialized
in case of failure, fc-transport triggers a warning for each command
failed.
Cc: stable@kernel.org
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 9a069e196767d7b87184fd8d8211d22bb5b9c0b8 |
|
12-Jan-2010 |
Giridhar Malavali <giridhar.malavali@qlogic.com> |
[SCSI] qla2xxx: Add BSG support for FC ELS/CT passthrough and vendor commands.
[jejb: fixed printk casting issues]
Signed-off-by: Sarang Radke <sarang.radke@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 858808019313f217d63ec4ad26686e6fb7b08c19 |
|
16-Dec-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Extend base EEH support in qla2xxx.
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d139b9bd0e52dda14fd13412e7096e68b56d0076 |
|
05-Nov-2009 |
James Bottomley <James.Bottomley@suse.de> |
[SCSI] scsi_lib_dma: fix bug with dma maps on nested scsi objects
Some of our virtual SCSI hosts don't have a proper bus parent at the
top, which can be a problem for doing DMA on them
This patch makes the host device cache a pointer to the physical bus
device and provides an extra API for setting it (the normal API picks
it up from the parent). This patch also modifies the qla2xxx and lpfc
vport logic to use the new DMA host setting API.
Acked-By: James Smart <james.smart@emulex.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 0d6e61bc6a4f3f54444b088ae6d447f1703a21dd |
|
25-Aug-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct various NPIV issues.
* Consolidate vport-count processing.
* Correct vp_idx restrictions during RSCN processing.
* Push topology verification check to qla2x00_do_dpc_all_vps().
* Don't skip vport full-login-lip/lip-reset mailbox handling.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7163ea815170f8c5d56ead27d7e6fa3fa1f9844b |
|
05-Aug-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Fix to ensure driver works in sinlge queue mode if multiqueue fails
When the multiqueue mode fails to work, the driver falls back on single
queue mode. This ensures that the firmware is reinitialized with single
queue options and all the resources are readjusted accordingly.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 656e89122a737b60cebc7b8fcb669faf0e7bc905 |
|
03-Jun-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export additional firmware-states for application support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6805c1504eb4cfd4a31c05ed88fdeb56228eb3ba |
|
03-Jun-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Avoid explicit LOGO during driver host tear-down.
As firmware will ultimately terminate (stop) and port
states-cleared.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 59e0b8b088031b3b751f0608f797f2581f49a827 |
|
03-Jun-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Correct NULL pointer bug in cpu affinity mode.
This patch fixes a NULL pointer bug that occurs when IO is being
carried out on a vport for which the cpu affinity mode is turned on.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 40859ae5f13534624cc35a05179b4f93ecbf531a |
|
03-Jun-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Correct queue-creation bug when driver loaded in QoS mode.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 11bbc1d896637c1d83b11cc3b97ed3d6d2076c63 |
|
03-Jun-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export TLV data on supported ISPs.
Firmware currently provides PB and PGF TLVs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ce0423f4a23317d0166addd7d6fcc4a0fa95e751 |
|
03-Jun-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export XGMAC statistics on supported ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7f774025171f626fc1a6a97781967c84a869d277 |
|
03-Jun-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export negotiated fabric-parameters for application support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8f979751367b9975fe606bce6a64b9d871dcfcfa |
|
07-Apr-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct typo in read_nvram() callback.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 68ca949cdb04b4dc71451a999148fbc5f187a220 |
|
07-Apr-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Add CPU affinity support.
Set the module parameter ql2xmultique_tag to 1 to enable this
feature. In this mode, the total number of response queues
created is equal to the number of online cpus. Turning the block
layer's rq_affinity mode on enables requests to be routed to the
proper cpu and at the same time it enables completion of the IO
in a response queue that is affined to the cpu in the request
path.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2afa19a9377ca61b9489e44bf50029574fbe63be |
|
07-Apr-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Add QoS support.
Set the number of request queues to the module paramater
ql2xmaxqueues. Each vport gets a request queue. The QoS value
set to the request queues determines priority control for queued
IOs. If QoS value is not specified, the vports use the default
queue 0.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bad7001c200458c24864df6f2b1b66548bca7c75 |
|
07-Apr-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export additional FCoE attributes for application support.
Cull and export VN_Port MAC address and VLAN_ID information on
supported FCoE ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| b9b12f73dff15915914f51bbff7620f5dd49b3de |
|
24-Mar-2009 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Correct several PCI-EEH issues.
In addition to checking for potentially unnecessary iomem
readX()/writeX() operations, a pci_channel_io_perm_failure should
not trigger a full internal removal. Found during additional
testing with pSeries blade systems.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6749ce362d38b47bd4669ccc0cafcc0014bff6e9 |
|
24-Mar-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Don't cache VPD data for newer ISPs.
As updates will occur using low-level option-rom manipulation
routines.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 3d79038f92841052aced9aec43c9d9aa864d28ab |
|
24-Mar-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Always use an FLT's NVRAM/VPD region information.
Rather than assuming a particular layout of the data. Applies to
recent ISPs only.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ad0ecd61f4ad3260ca8f7216765ddbb1a10677ea |
|
24-Mar-2009 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Add EDC-update support.
Interface allows for the update of onboard EDC firmware
present on mezzanine ISP25xx type cards.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| fbcbb5d0cf69ba8b59028ec3c5b9f9ff04409b88 |
|
24-Mar-2009 |
Lalit Chandivade <lalit.chandivade@qlogic.com> |
[SCSI] qla2xxx: Export flash-block-size for application support.
In handling the RMW semantics needed to update regions not
falling on a sector boundary.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d0c3eefae09e4c19d6da1ed2417e02d8377b1eb3 |
|
24-Mar-2009 |
Lalit Chandivade <lalit.chandivade@qlogic.com> |
[SCSI] qla2xxx: Remove implicit ISP-abort after a flash update.
For ISP24xx and above the ISP-abort after flash update is not
needed, as the only purpose it was serving was to update the boot
code and firmware versions in the scsi_qla_host_t structure. Now
an update of the versions will be done in the write-vpd path.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6e181be508cf81fda4407b4689befeb7e4149607 |
|
26-Mar-2009 |
Lalit Chandivade <lalit.chandivade@qlogic.com> |
[SCSI] qla2xxx: Add reset capabilities for application support.
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2533cf671da0603129c8af9c31c735e1d2654e20 |
|
24-Mar-2009 |
Lalit Chandivade <lalit.chandivade@qlogic.com> |
[SCSI] qla2xxx: Correct ISP abort semantics for NVRAM, VPD, and flash update.
Ensure that an ISP-abort has completed before performing any
update. After the update do not wait for an ISP-abort completion,
instead just wait until the ISP is reset. This avoids long
delays due to waiting for loop ready in qla2x00_abort_isp().
Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 55a961581fd34632bf724dd144c0dbf740c9fede |
|
24-Mar-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update MPI/PHY version retrieval codes.
Reflects layout and format of latest specification.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| be67e6530b006b10380a5f0c49cdf974426a22e9 |
|
24-Mar-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Preserve an fcport's loop-id after terminate_rport_io().
Since in some circumstances, login-retries may be occuring in the
background via the DPC routine. This race, in the inadvertant
setting of the loop-id to 'NONE' breaks the existing retry logic.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6431c5dc5eeaa79863b4af300c081a01e2ccd0bb |
|
05-Mar-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct address range checking for option-rom updates.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| cf5a163127118325296c90670093b14afebb8424 |
|
09-Feb-2009 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Correct slab-error overwrite during vport creation and deletion.
The clearing of a vha's req_ques were overrunning during vport
creation. During deletion, vport queues should be torn-down
after all cleanup has occurred.
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 3c01b4f9fbb43fc911acd33ea7a14ea7a4f9866b |
|
22-Jan-2009 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Add checks for a valid fcport in dev-loss-tmo/terminate_rport_io callbacks.
Commit f78badb1ae07e7f8b835ab2ea0b456ed3fc4caf4 ([SCSI] fc
transport: pre-emptively terminate i/o upon dev_loss_tmo timeout)
changed the callback semantics of dev_loss_tmo and
terminate_rport_io such that repeated calls could be made. This
could result in the the driver using stale (NULLed-out, in
dev_loss_tmo) data from the rport. Correct this by addint a
simple check to ensure a valid fcport is attached.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 3a03eb797ce76ae8868a1497e9e746ad0add1e3b |
|
05-Jan-2009 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP81XX support.
Codes to support new FCoE boards.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 73208dfd7ab19f379d73e8a0fbf30f92c203e5e8 |
|
10-Dec-2008 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: add support for multi-queue adapter
Following changes have been made.
1. qla_hw_data structure holds an array for request queue pointers,
and an array for response queue pointers.
2. The base request and response queues are created by default.
3. Additional request and response queues are created at the time of vport
creation. If queue resources are exhausted during vport creation, newly
created vports use the default queue.
4. Requests are sent to the request queue that the vport was assigned
in the beginning.
5. Responses are completed on the response queue with which the request queue
is associated with.
[fixup memcpy argument reversal spotted by davej@redhat.com]
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7b867cf76fbcc8d77867cbec6f509f71dce8a98f |
|
06-Nov-2008 |
Anirban Chakraborty <anirban.chakraborty@qlogic.com> |
[SCSI] qla2xxx: Refactor qla data structures
Following changes have been made to the qla2xxx FC driver in
preparation for the multi- queue and future SR IOV hardware.
1. scsi_qla_host structure has been changed to contain scsi host
specific data only.
2. A new structure, qla_hw_data is created to contain HBA specific
hardware data.
3. Request and response IO specific data strucures are created.
4. The global list of fcports for the hba is not maintained anymore,
instead a fcport list is construted on per scsi_qla_host.
Signed-of-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 9cc328f502eacfcc52ab1c1bf9a7729cf12f14be |
|
20-Aug-2008 |
Mike Christie <michaelc@cs.wisc.edu> |
[SCSI] ibmvfc, qla2xxx, lpfc: remove scsi_target_unblock calls in terminate callbacks
The fc class now calls scsi_target_unblock after calling the
terminate callback, so this patch removes the calls from the
drivers.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| c00d8994d91e51aa6b891ad0e877f66cc1011de2 |
|
12-Sep-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add Flash Layout Table support.
The Flash Layout Table (FLT) present on many recent HBAs encodes
flash usage information, organizes data stored into separate
regions and presents the information uniformly to the driver.
Use this information rather than using specific hard-coded values
based on ISP type.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 49fd462a1ba4a1b9bfbfe01d279d506017d85492 |
|
12-Sep-2008 |
Harish Zunjarrao <harish.zunjarrao@qlogic.com> |
[SCSI] qla2xxx: Add input/output byte-count statistics.
Currently Firmware does not have counters for input megabytes and
output megabytes, therefore driver counts these values depending
on the status of the scsi command and direction of the command.
The values are exported in the FC_HOST path.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6390d1f33faecf48e31f27dd7dbe928540f8acfc |
|
14-Aug-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct synchronization of software/firmware fcport states.
Greg Wettstein (greg@enjellic.com) noted:
http://article.gmane.org/gmane.linux.scsi/43409
on a reboot of a previously recognized SCST target, the initiator
driver would be unable to re-recognize the device as a target.
It turns out that prior to the SCST software reloading and
returning it's "target-capable" abilities in the PRLI payload,
the HBA would be re-initialized as an initiator-only type port.
Since initiators typically classify themselves as an FCP-2
capable device, both software and firmware do not perform an
explicit logout during port-loss. Unfortunately, as can be seen
by the failure case, when the port (now target-capable) returns,
firmware performs an ADISC without a follow-on PRLI, leaving
stale 'initiator-only' data in the firmware's port database.
Correct the discrepancy by performing the explicit logout during
the transport's request to terminate-rport-io, thus synchronizing
port states and ensuring a follow-on PRLI is performed.
Reported-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 00eabe7c4478f38b42d632763c4878ced5a1f25c |
|
28-Jul-2008 |
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> |
[SCSI] qla2xxx: fix msleep compile error
drivers/scsi/qla2xxx/qla_attr.c: In function 'qla24xx_vport_delete':
drivers/scsi/qla2xxx/qla_attr.c:1184: error: implicit declaration of function 'msleep'
make[3]: *** [drivers/scsi/qla2xxx/qla_attr.o] Error 1
make[3]: *** Waiting for unfinished jobs....
Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| c9c5ced90abc22a94c96fa7db0e29c13483a6db0 |
|
24-Jul-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Additional NPIV corrections.
Minor fixes addressing:
- rport managements during vport deletion.
- acquire proper physical-ha during qla24xx_abort_command() and
qla24xx_queuecommand()
- do not needlessly acquire the pha for non-NPIV capable ISPs.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| b3dc9088f3714642284245a6c580305a1415e0e3 |
|
24-Jul-2008 |
Akinobu Mita <akinobu.mita@gmail.com> |
[SCSI] qla2xxx: use memory_read_from_buffer()
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1ee2714632ce3f7e6477069b41cb685112f5f217 |
|
11-Jul-2008 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Retrieve board serial-number and description from VPD.
Recent ISPs have this information written at manufacturing time,
so use the information. This also reduces future churn of the
qla_devtbl.h file contents, as the driver can now depend on the
information to be present in VPD.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 711c1d916be083a5bf4fbc8e66201e7e9f8b9334 |
|
11-Jul-2008 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Cleanup NPIV related functions
Removed repeated or unnecessary operations during vport
creation/deletion.
Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 032d8dd739eccbb39c78c901beece70062d1820d |
|
11-Jul-2008 |
Harish Zunjarrao <harish.zunjarrao@qlogic.com> |
[SCSI] qla2xxx: Add LIP count to FC-transport statistics.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| e5f5f6f72b10c4c6209f0522a7c5b27079d64429 |
|
11-Jul-2008 |
Harish Zunjarrao <harish.zunjarrao@qlogic.com> |
[SCSI] qla2xxx: Track total number of ISP aborts.
This parameter counts the total number of ISP aborts during
driver execution. The value is exported through a DEVICE_ATTR()
off the scsi_host.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 85821c906cf3563a00a3d98fa380a2581a7a5ff1 |
|
11-Jul-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Set an rport's dev_loss_tmo value in a consistent manner.
As there's no point in adding a fixed-fudge value (originally 5
seconds), honor the user settings only. We also remove the
driver's dead-callback get_rport_dev_loss_tmo function
(qla2x00_get_rport_loss_tmo()).
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 5f3a9a207f1fccde476dd31b4c63ead2967d934f |
|
11-Jul-2008 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Add dev_loss_tmo_callbk/terminate_rport_io callback support.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 68af081151670af4ca405823f9dfb74ec6b20e66 |
|
13-May-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump.
The user-initiated dump can be a useful tool in triaging complex
ISP and FC issues.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6c2f527cb84cbd7d2d8a668c979e70bf78980ccc |
|
13-May-2008 |
matthias@kaehlcke.net <matthias@kaehlcke.net> |
[SCSI] qla2xxx: Convert vport_sem to a mutex
The semaphore vport_sem is used as a mutex. Convert it to the
mutex API.
Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2f2fa13d5665d7d5f2ba6068dd28ca7796fa9ea8 |
|
13-May-2008 |
Shyam Sundar <shyam.sundar@qlogic.com> |
[SCSI] qla2xxx: Return correct port_type to FC-transport for Vports.
For Vports, the port_type should be set to FC_PORTTYPE_NPIV.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bbd1ae412c9eb09ae7bb11cfaf7018a2367d493f |
|
18-Mar-2008 |
Hannes Reinecke <hare@suse.de> |
[SCSI] qla2xxx, lfpc: Rename 'state' attribute to 'link_state'
lpfc and qla2xxx overwrite the standard 'state' attribute with
custom callbacks. So rename the custom attributes to 'link_state'
and retain the original meaning of the 'state' attribute.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ee959b00c335d7780136c5abda37809191fe52c3 |
|
22-Feb-2008 |
Tony Jones <tonyj@suse.de> |
SCSI: convert struct class_device to struct device
It's big, but there doesn't seem to be a way to split it up smaller...
Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 4d4df1932b6b116aecc81039066fec27f2050762 |
|
03-Apr-2008 |
Harihara Kadayam <harihara.kadayam@qlogic.com> |
[SCSI] qla2xxx: Add ISP84XX support.
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 5ab5a4dd5444db0715b5748bab916725138d3a32 |
|
03-Apr-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Use an rport's scsi_target_id member consistently throughout driver.
Rather than using a duplicate/cached value stored in the driver's
internal fcport structure.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2ae2b3709542a4b5b691985ecbdf3b79303d9e56 |
|
03-Apr-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for host supported speeds FC transport attribute.
Use generic FC transport #defines for speed values.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 01e58d8eac93f3b73246b8d0bdee071d9fb85661 |
|
03-Apr-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update copyright banner.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| da4541b63bbe9a945d7bbc1105f2deacc42ef195 |
|
31-Jan-2008 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Access the proper 'physical' port in FC-transport callbacks.
For following fc_host specific attributes, vports rely on the pport.
So, this patch changed way to access the data for those attributes so that
they can access pport's.
- get_host_speed (speed)
- get_host_port_state (port_state)
- get_host_port_type (port_type)
- get_fc_host_stats
Also, added PORT_SPEED_8GB case in the speed attribute for 8Gb HBAs.
Signed-Off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| e87110852d0bd331d50c3de686a7fc9626579d60 |
|
31-Jan-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Cleanse memory allocation logic during probe.
- Drop loop-till-allocated structure of code within
qla2x00_mem_alloc().
- Properly unwind deallcations of memory during failures.
- Drop qla2x00_allocate_sp_pool() and qla2x00_free_sp_pool()
functions as their implementations can easily be collapsed into
the callers.
- Defer DMA pool allocation of SFP data until requested.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a824ebb37c1a1c5fd8e19b47bf5c14cb7b419b48 |
|
17-Jan-2008 |
Adrian Bunk <bunk@kernel.org> |
[SCSI] qla2xxx: Code cleanups.
- make the following needlessly global code static:
- qla_attr.c: qla24xx_vport_delete()
- qla_attr.c: qla24xx_vport_disable()
- qla_mid.c: qla24xx_allocate_vp_id()
- qla_mid.c: qla24xx_find_vhost_by_name()
- qla_mid.c: qla2x00_do_dpc_vp()
- qla_os.c: struct qla2x00_driver_template
- qla_os.c: qla2x00_stop_timer()
- qla_os.c: qla2x00_mem_alloc()
- qla_os.c: qla2x00_mem_free()
- qla_sup.c: qla2x00_lock_nvram_access()
- qla_sup.c: qla2x00_unlock_nvram_access()
- qla_sup.c: qla2x00_get_nvram_word()
- qla_sup.c: qla2x00_write_nvram_word()
- #if 0 the following unused global functions:
- qla_mbx.c: qla2x00_system_error()
- qla_os.c: remove some unneeded function prototypes
- removed unused functions:
- qla_dbg.c: qla2x00_dump_pkt()
- qla_mbx.c: qla2x00_get_serdes_params()
- qla_mbx.c: qla2x00_get_idma_speed()
- qla_mbx.c: qla24xx_get_vp_database()
- qla_mbx.c: qla24xx_get_vp_entry()
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Small modifications and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a4722cf24d7a0dfa0874d49f61b053a6459761bf |
|
17-Jan-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Don't schedule the DPC routine to perform an issue-lip request.
As the driver depends on the DPC routine to handle bottom-half
loop resynchronization in order to recover from the issue-lip
request. The issue_lip call is sleeping context capable, so just
issue the reset function there.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 43ef058010c79a967195539bbcdeee8c5b24219d |
|
17-Jan-2008 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Retrieve additional HBA port statistics from recent ISPs.
HBAs supporting these additional counters include ISP24xx and
ISP25xx type boards.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| eb66dc60be5a72bc940458a5adfd400e4d810d49 |
|
12-Nov-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct NPIV support for recent ISPs.
Firmware will export to software the maximum number of vports
supported for any given firmware version and ISP type. Use this
information rather than the current hardcoding of limitations
within the driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8b7afc2a90d93d87d53732a9281c22facebe8d62 |
|
20-Oct-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Correct display of ISP serial-number.
The original serial-number calculations based on WWPN no longer
apply to newer ISPs (ISP24xx and ISP25xx). These newer board's
serial number reside in the VPD.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 2c96d8d0c17978bbf5eb82314d488f46d4a51280 |
|
20-Oct-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.
Since both NVRAM and VPD regions of the flash reside on unaligned
sector boundaries, during update, the driver must perform a
read-modify-write operation to the composite NVRAM/VPD region.
This affects ISP25xx type boards only.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| f363b9434a464e72927b468ba33cb548f482669f |
|
20-Sep-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Use shost_priv().
Drop usage of legacy to_qla_host() macro.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 4d0ea24769c81581b8fd25fd7deff281b1b97dee |
|
20-Sep-2007 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: Retrieve max-NPIV support capabilities from FW.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| c45bcc8e771fa152ed540b8cb2ac8022280173bd |
|
20-Sep-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Use the correct pointer-address during NVRAM writes.
Original code, incorrectly passed the address-of a pointer rather
than the pointer value itself.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| b7cc176c9eb3aa6989ac099efd8bdd6d0eaa784a |
|
20-Sep-2007 |
Joe Carnuccio <joe.carnuccio@qlogic.com> |
[SCSI] qla2xxx: Allow region-based flash-part accesses.
Additional cleanups and
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 281afe1947d855661754850de29d7530b2ff18dc |
|
26-Jul-2007 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes
This is a patch to fix 'segmentation fault' issue which was initiated
by Richard Lary <rlary@us.ibm.com>. Thanks again Richard.
- on following sysfs attritute function, changes have made so that both
count and offset input parameters are honored by the functions.
= qla2x00_sysfs_read_nvram()
= qla2x00_sysfs_read_vpd()
- made changes so that NVRAM data to be cached to minimize H/W accesses
during agent querying of the driver's.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| c3a2f0dfe1cecac76950f340f540c1a887dd2500 |
|
20-Jul-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP25XX support.
Large code-reuse from ISP24xx, consolidate RISC memory
extraction routines during firmware-dump.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| fd34f55694a784052981977cb84c50ea369ffc68 |
|
20-Jul-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Re-factor isp_operations to static structures.
In preparation for new ISP types.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| e428924ccdf4644c58e23c2314ab970ff3afc607 |
|
20-Jul-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Generalize FW-Interface-2 support.
In preparation for new ISP types.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bc06cffdec85d487c77109dffcd2f285bdc502d3 |
|
16-Jul-2007 |
Linus Torvalds <torvalds@woody.linux-foundation.org> |
Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
[SCSI] ibmvscsi: convert to use the data buffer accessors
[SCSI] dc395x: convert to use the data buffer accessors
[SCSI] ncr53c8xx: convert to use the data buffer accessors
[SCSI] sym53c8xx: convert to use the data buffer accessors
[SCSI] ppa: coding police and printk levels
[SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
[SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
[SCSI] remove the dead CYBERSTORMIII_SCSI option
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
[SCSI] Clean up scsi_add_lun a bit
[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
[SCSI] sni_53c710: Cleanup
[SCSI] qla4xxx: Fix underrun/overrun conditions
[SCSI] megaraid_mbox: use mutex instead of semaphore
[SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
[SCSI] qla2xxx: update version to 8.02.00-k1.
[SCSI] qla2xxx: add support for NPIV
[SCSI] stex: use resid for xfer len information
[SCSI] Add Brownie 1200U3P to blacklist
[SCSI] scsi.c: convert to use the data buffer accessors
...
|
| 2c3dfe3f6ad8daff5acdb01713e4f2b116e78136 |
|
05-Jul-2007 |
Seokmann Ju <seokmann.ju@qlogic.com> |
[SCSI] qla2xxx: add support for NPIV
Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.
- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.
Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 91a6902958f052358899f58683d44e36228d85c2 |
|
09-Jun-2007 |
Zhang Rui <rui.zhang@intel.com> |
sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
Well, first of all, I don't want to change so many files either.
What I do:
Adding a new parameter "struct bin_attribute *" in the
.read/.write methods for the sysfs binary attributes.
In fact, only the four lines change in fs/sysfs/bin.c and
include/linux/sysfs.h do the real work.
But I have to update all the files that use binary attributes
to make them compatible with the new .read and .write methods.
I'm not sure if I missed any. :(
Why I do this:
For a sysfs attribute, we can get a pointer pointing to the
struct attribute in the .show/.store method,
while we can't do this for the binary attributes.
I don't know why this is different, but this does make it not
so handy to use the binary attributes as the regular ones.
So I think this patch is reasonable. :)
Who benefits from it:
The patch that exposes ACPI tables in sysfs
requires such an improvement.
All the table binary attributes share the same .read method.
Parameter "struct bin_attribute *" is used to get
the table signature and instance number which are used to
distinguish different ACPI table binary attributes.
Without this parameter, we need to offer different .read methods
for different ACPI table binary attributes.
This is impossible as there are various ACPI tables on different
platforms, and we don't know what they are until they are loaded.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7b595756ec1f49e0049a9e01a1298d53a7faaa15 |
|
13-Jun-2007 |
Tejun Heo <htejun@gmail.com> |
sysfs: kill unnecessary attribute->owner
sysfs is now completely out of driver/module lifetime game. After
deletion, a sysfs node doesn't access anything outside sysfs proper,
so there's no reason to hold onto the attribute owners. Note that
often the wrong modules were accounted for as owners leading to
accessing removed modules.
This patch kills now unnecessary attribute->owner. Note that with
this change, userland holding a sysfs node does not prevent the
backing module from being unloaded.
For more info regarding lifetime rule cleanup, please read the
following message.
http://article.gmane.org/gmane.linux.kernel/510293
(tweaked by Greg to not delete the field just yet, to make it easier to
merge things properly.)
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 26b8d34808598aae760091ae551182de91f3e0ae |
|
29-Jan-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Allow NVRAM updates to immediately go into effect.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 178779a6ca7c23b52d5537b972f2b54c830b4480 |
|
29-Jan-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Check loop-state before reading host statistics.
Non-ISP24xx cards must have a loop-id in order to query host
statistics.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 30c4766213aeb684ee477ac7f36703f9134ac7ad |
|
29-Jan-2007 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export OptionROM boot-codes version information.
This includes BIOS, EFI, FCODE and firmware versions.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 46ddab7b1c7225269ad45d33fc39d0a385194360 |
|
27-Nov-2006 |
Randy Dunlap <randy.dunlap@oracle.com> |
[SCSI] qla2xxx: use NULL instead of 0
Use NULL instead of 0 for pointers (sparse warning):
drivers/scsi/qla2xxx/qla_attr.c:393:4: warning: Using plain integer as NULL pointer
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| f1663ad5dbb801e03c4c99c24d698ad5dba9aaff |
|
13-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Check return value of sysfs_create_bin_file() usage.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7047fcddb1bc96a80fc54ac3a88ea18ca3ae77f6 |
|
02-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for host port state FC transport attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 90991c85d398fd46b2b07440b5639eb50dfacb2b |
|
02-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for fabric name FC transport attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a740a3f0407ed3344b28b05926b0ce61768e9893 |
|
02-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for system hostname FC transport attribute.
The system hostname will be used during a subsequent FDMI registration
with the fabric.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1620f7c2d8e3fdd7dba04bfe5f9c42201eef1188 |
|
02-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support for symbolic nodename FC transport attribute.
Refactored original code from qla_gs.c:qla2x00_rsnn_nn().
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d8b4521349274ab610d0b29384c704444e55cbca |
|
02-Oct-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add iIDMA support.
iIDMA (Intelligent Interleaved Direct Memory Access) allows for
the HBA hardware to send FC frames at the rate at which they can
be received by a target device. By taking advantage of the
higher link rate, the HBA can maximize bandwidth utilization in a
heterogeneous multi-speed SAN.
Within a fabric topology, port speed detection is done via a Name
Server command (GFPN_ID) followed by a Fabric Management command
(GPSC). In an FCAL/N2N topology, port speed is based on the HBA
link-rate.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7914d004bcff3e59ca7c0d628f9862fe6655429c |
|
24-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Create an VPD sysfs entry for supported ISPs only.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 88729e53a4798df20e7a7ef68e0a816f4a268da4 |
|
24-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add DMI (Diagnostics Monitoring Interface) support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| a7a167bf7e2d196fc33f292e7b02e90fee03bc9a |
|
24-Jun-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Rework firmware-trace facilities.
- Defer firmware dump-data raw-to-textual conversion to
user-space.
- Add module parameter (ql2xallocfwdump) to allow for per-HBA
allocations of firmware dump memory.
- Dump request and response queue data as per firmware group
request.
- Add extended firmware trace support for ISP24XX/ISP54XX chips.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| d4e3e04d789ba23027c66e176b10ac7477906948 |
|
18-May-2006 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Consolidate firmware-dump handling across ISPs.
Simplify and centralise buffer allocation/deallocation, as
there's no point in having two memory request methods.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 4a59f71d7f0d6dd433fd509584352cdd7c62e877 |
|
09-Mar-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Further restrict ZIO mode support.
Only support ZIO mode 6 on specific ISP types.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 6f6417905cf272337a9762e1f92a1fffa651fcd3 |
|
09-Mar-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add VPD sysfs attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 044cc6c8ec311c4ddeebfcc31c53dea282de70b7 |
|
09-Mar-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP54xx support.
Chip is similar in form to our ISP24xx offering.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 854165f4245c4a3b4a8cc363ba2050033151e196 |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support to retrieve/update HBA option-rom.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1b3f63659bd353ae460c35f5793a9fd46cc95014 |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Return correct data-len during NVRAM retrieval.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| f6df144cca19cc60dda6dcce65d236b70cc46494 |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add beacon support via class-device attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 392e2f651c8a83484116a407a9f121e534c22b5a |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add host-statistics FC transport attributes.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8d067623adf119081b7a2683cdc6ee90eb8a70b2 |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add host port-type FC transport attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 04414013bbda644b65537e73f1dacb2821b36811 |
|
01-Feb-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add port-speed FC transport attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| dad9c8c15dbe4eac0ab086c74cdb256ec2fb0b70 |
|
14-Jan-2006 |
andrew.vasquez@qlogic.com <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Reference proper node/port names in fc_host class.
The initial-control-block references are not always correct
as the use-node-name qualifier during NVRAM configuration
will cause the firmware to use the portname as a base for
the nodename.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 5433383ef33ed40c9c8a86a4355da344234af2a5 |
|
10-Nov-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add full firmware(-request) hotplug support for all ISPs.
Transition driver to exclusively use the request_firmware()
interfaces to retrieve firmware-blobs from user-space. This
will be the default behaviour going forward until the
embedded firmware-binary images are removed from the
upstream kernel.
Upon request, the driver caches the firmware image until the
driver is unloaded.
NOTE: The option is present to allow the user to continue to
use the firmware-loader modules, but, should be considered
deprecated.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 91ca7b01ecc916632202180569a7ddbfccfc3f05 |
|
28-Oct-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] Add an 'Issue LIP' device attribute in fc_transport class
Ok, here's a patch to add such a common API for fc transport users.
Relevant LLD changes (lpfc and qla2xxx) also present.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| fa90c54f6d27664cc67691f9e52d9165e0c25ca7 |
|
27-Oct-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Update license.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 4fdfefe52944f5c4132a372ed5c208962a73c3f2 |
|
27-Oct-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add support to dynamically enable/disable ZIO.
ISP23xx and ISP24xx chips have support for an adaptive
method of posting SCSI command completions for multiple SCSI
commands during a single system interrupt.
SCSI commands are placed on the system response queue
without interrupting the host until 1) a delay timer
expires; or 2) a SCSI command completes with an error.
As long as the host software (qla2xxx) services the response
queue for completions (this polling is done during
queuecommand()) within the 'delay timer' period, the
firmware will not generate system interrupt.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| f8b02a85ebbf5eed63163ca9ed915bf8c47309c5 |
|
01-Sep-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: use wwn_to_u64() transport helper
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| afb046e2be724a90f21f7cf0ba50e328005bd038 |
|
27-Aug-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add host attributes.
Export additional host information via the shost_attrs member in
the scsi_host template. Attributes include: driver version,
firmware version, ISP serial number, ISP type, ISP product ID,
HBA model name, HBA model description, PCI interconnect
information, and HBA port state.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| ad3e0edaceb9771be7ffbd7aa24fb444a7ed85bf |
|
27-Aug-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Export class-of-service (COS) information.
Export COS information for the fc_host and fc_remote_port
objects added by the driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| fca297037127e524e8f61b3fc1c7a1886e5d757b |
|
06-Jul-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add OS initialization codes for ISP24xx recognition.
Add OS initialization codes for ISP24xx recognition.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 459c537807bd72cce7b007fb218bb5a658a6c3c1 |
|
06-Jul-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Add ISP24xx flash-manipulation routines.
Add ISP24xx flash-manipulation routines.
Add read/write flash manipulation routines for the ISP24xx.
Update sysfs NVRAM objects to use generalized accessor
functions.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| abbd8870b9cb7754a4935826bc9f3c7b029f8b7c |
|
06-Jul-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.
Factor-out ISP specific functions to method-based call tables.
In anticipation of ISP24xx/ISP25xx support, factor-out ISP
specific functions into a method-based call table.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 1c97a12a29b49ad4432927eac076fd5e3dedece6 |
|
21-Apr-2005 |
Andrew Vasquez <andrew.vasquez@qlogic.com> |
[SCSI] qla2xxx: remove a transport #include
Make transport-functions structure non-static. Replace #include of
scsi_transport.h with a forward declaration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 7aaef27bafdfa10351726a1d383bdde33422072c |
|
17-Apr-2005 |
<jejb@titanic.il.steeleye.com> |
qla2xxx: fix compiler warning in qla_attr.c
CC [M] drivers/scsi/qla2xxx/qla_attr.o
drivers/scsi/qla2xxx/qla_attr.c: In function `qla2x00_sysfs_write_fw_dump':
drivers/scsi/qla2xxx/qla_attr.c:65: warning: implicit declaration of function `vfree'
drivers/scsi/qla2xxx/qla_attr.c:83: warning: implicit declaration of function `vmalloc'
drivers/scsi/qla2xxx/qla_attr.c:83: warning: cast to pointer from integer of different size
Also remove spurious inclusion of linux/version.h
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| bdf796210e01145fd77bbb3ae644d04f982b6c3b |
|
17-Apr-2005 |
<andrew.vasquez@qlogic.com> |
[PATCH] qla2xxx: remove lun discovery codes...
Remove internal lun discovery routines and support
structures.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|
| 8482e118afa0cb4321ab3d30b1100d27d63130c0 |
|
17-Apr-2005 |
<andrew.vasquez@qlogic.com> |
[PATCH] qla2xxx: add remote port codes...
Add initial support for FC remote port infrastructure.
o Use fc_remote_port...() registration and block/unlock
functions.
o Consolidate 'attribute' (fc-remote/sysfs) helpers into
new qla_attr.c file.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
/drivers/scsi/qla2xxx/qla_attr.c
|