Cross Reference: /drivers/scsi/scsi

History log of /drivers/scsi/scsi_debug.c
Revision	Date	Author	Comments
3f0bc3b331a371392bb64c5b211b60ec84d5a444	08-Mar-2012	Martin K. Petersen <mkp@mkp.net>	[SCSI] scsi_debug: Fix incorrect page length in logical block provisioning VPD The page length for the 0xb2 VPD page is defined to be 4 bytes when no provisioning descriptors are provided (DP=0). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
be1dd78de5686c062bb3103f9e86d444a10ed783	08-Mar-2012	Eric Sandeen <sandeen@redhat.com>	[SCSI] scsi_debug: add LBPRZ support Add LBPRZ support to scsi_debug; i.e. read zeros for unmapped blocks. Rather than checking for unmapped blocks at read time, this just zeroes them on the backing store at unmap time so it behaves the same way. This also adds a module parameter to disable it. lbprz, "unmapped blocks return 0 on read (def=1)" [jejb: fix whitespace errors] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
77dfce076cbd76c04e90abff188d058cdbff78dd	25-Nov-2011	Cong Wang <amwang@redhat.com>	scsi: remove the second argument of k[un]map_atomic() Signed-off-by: Cong Wang <amwang@redhat.com>
18a4d0a22ed6c54b67af7718c305cd010f09ddf8	09-Feb-2012	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] Handle disk devices which can not process medium access commands We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
de13e9654e308db6bde49c779410512ad9659bc0	20-Jan-2012	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: GET LBA STATUS response length correction The SCSI GET LBA STATUS command was introduced in SBC-3 revision 20 in September 2009. At that time the Parameter Data Length field in the response had an associated byte offset of 8. Then in SBC-3 revision 25 (October 2010) that byte offset was changed to 4. The sg_get_lba_status utility in sg3_utils version 1.33 (released earlier today) has been changed to calculate the newer response length. However the implementation of GET LBA STATUS command in the scsi_debug driver still uses the original byte offset. modify the Parameter Data Length field value in the GET LBA STATUS command response to comply with the change in SBC-3 revision 25 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
25985edcedea6396277003854657b5f3cb31a628	31-Mar-2011	Lucas De Marchi <lucas.demarchi@profusion.mobi>	Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
32f7ef73585a8773914661e1a8e477e7a0bfa8b4	11-Mar-2011	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: add consecutive medium errors A useful test case for error recovery is multiple, consecutive medium errors. When scsi_debug is started with "opts=2" a MEDIUM ERROR is generated when block 0x1234 (4660) is read. The patch extends that to 10 consecutive blocks from 0x1234 (i.e. blocks 4660 to 4669 inclusive). [0:0:0:0] disk ATA INTEL SSD 2CV1 /dev/sda /dev/sg0 80.0GB [10:0:0:0] disk Linux scsi_debug 0004 /dev/sdb /dev/sg1 1.09TB Output file not specified so no copy, just reading input >> unrecovered read error at blk=4660, substitute zeros ... >> unrecovered read error at blk=4669, substitute zeros 4670+10 records in 0+0 records out 10 unrecovered read errors lowest unrecovered read lba=4660, highest unrecovered lba=4669 time to read data: 0.047943 secs at 49.87 MB/sec BTW Change /dev/sg1 (bsg device works just as well) to /dev/sdb to see why, with faulty media, you do not want to use the block layer interface. Reason: time block layer takes to do useless retries and collateral damage to data in its 4 KB blocks (O_DIRECT mitigates the latter). ChangeLog: - extend opts=2 medium error generation at block 0x1234 to 10 consecutive blocks (i.e. blocks 0x1234 to 0x123d). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
5b94e23292dec213e5bb0240894b597d93744e2a	08-Mar-2011	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Logical Block Provisioning (SBC3r26) Update scsi_debug to support the Logical Block Provisioning commands and bits as defined in SBC3r26. The old tp* parameters have been transitioned to the new lbp* scheme found in the draft standard. The old tpu option to enable UNMAP is now called lbpu. tpws to signal support for WRITE SAME(16) with the UNMAP bit set is now lbpws. Support for WRITE SAME(10) with the UNMAP bit set is also available using the lpuws10 parameter. Limiting the maximum number of blocks per WRITE SAME command has been implemented and is available via the write_same_length module parameter. As part of the renaming process the parameter lists have been sorted alphabetically (request from Doug). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
a361cc0025614fdd07f5f69aeeaa8075530870bc	01-Feb-2011	Darrick J. Wong <djwong@us.ibm.com>	[SCSI] scsi_debug: Fix 32-bit overflow in do_device_access causing memory corruption If I create a scsi_debug device that is larger than 4GB, the multiplication of (block * scsi_debug_sector_size) can produce a 64-bit value. Unfortunately, the compiler sees two 32-bit quantities and performs a 32-bit multiplication, thus truncating the bits above 2^32. This causes the wrong memory location to be read or written. Change block and rest to be unsigned long long. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
a87e3a67d57472f40da2218793ff6d25c4518498	18-Dec-2010	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: set resid to indicate no data-in when medium error set resid to the requested data-in length when a MEDIUM ERROR is simulated. This implies no valid data is returned in the data-in buffer Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
f281233d3eba15fb225d21ae2e228fd4553d824a	16-Nov-2010	Jeff Garzik <jeff@garzik.org>	SCSI host lock push-down Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (done)(struct scsi_cmnd ) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9b906779568f009b53254a15b283b53ae4570b93	07-Sep-2010	Nicholas Bellinger <nab@linux-iscsi.org>	[SCSI] scsi_debug: Convert to use root_device_register() and root_device_unregister() This patch updates the scsi_debug virtual LLD to use root_device_register() and root_device_unregister() from include/linux/device.h instead of device_register() and device_unregister() respectively within scsi_debug_init() and scsi_debug_exit() This simply involved converting the static struct device pseudo_primary into a pointer that is setup by the call to root_device_register(). This patch also contains the correct IS_ERR() conditional check of root_device_register() from within scsi_debug_init(). Thanks to Richard Sharpe and Dmitry Torokhov for their help with this item. Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
6014759c929b4ce8c068810b8d05f31969df5897	19-Aug-2010	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Update thin provisioning support The previous thin provisioning support was not very user friendly because it depended on all the relevant options being set on the command line. Implement support for the Thin Provisioning VPD page from SBC3 r24 and add module options for TPU (UNMAP) and TPWS (WRITE SAME (16) with UNMAP bit). This allows us to have sane default and to enable thin provisioning with a simple tpu=1 or tpws=1 on the command line depending on whether we want UNMAP or WRITE SAME behavior. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
9ab98f57b3e1d73cd0720d29c21b687ba609cde9	27-Jun-2010	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: fix map_region and unmap_region oops map_region and unmap_region could access to invalid memory area since they don't check the size boundary. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
5447ed6c968e7270b656afa273c2b79d15d82edd	25-Apr-2010	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: virtual_gb ignores sector_size In the scsi_debug driver, the virtual_gb option ignores the sector_size, implicitly assuming that is 512 bytes. So if 'virtual_gb=1 sector_size=4096' the result is an 8 GB (virtual) disk. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
e308b3d19d1cf6af39024121269bb384b95d3da3	23-Mar-2010	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Block Limits VPD page fixes Add a few clarifying comments in the B0 page function and allow the optimal transfer length field to be specified on the command line using opt_blks=N. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
78d4e5a07dca7374dd9db40b3346d727b65eb794	25-Mar-2010	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: add max_queue + no_uld parameters While testing the midlevel q_at_head and q_at_tail patch for sg and the block SG_IO ioctl I found it useful to reduce the queuing within the scsi_debug driver. The reason is that the midlevel queue only comes into play when the corresponding LLD queue is full. It is also useful when testing to be confident that your program is the only thing issuing commands to the (virtual) scsi_debug device. The no_uld=1 parameter will stop a scsi_debug virtual disk appearing as /dev/sd* . Changelog: - add max_queue parameter to reduce the number of queued commands the driver will accept. This parameter can be changed after the driver is loaded. - add no_uld parameter that restricts scsi_debug's virtual devices to the sg and bsg drivers - correct stale url Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
5a0e3ad6af8660be21ca98a971cd00f331318c05	24-Mar-2010	Tejun Heo <tj@kernel.org>	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
1e49f78505b2c4df193614d774bf46d067cda7d8	29-Oct-2009	Douglas Gilbert <dgilbert@interlog.com>	[SCSI] scsi_debug: fix Thin provisioning support While testing scsi_debug with these patches I found a problem with the Block Limits VPD page function. The length returned by the inquiry_evpd_b0() function was too short. A patch to fix that and a cosmetic change (that the form factor of scsi_debug is less than 1.8 inches) is attached. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
44d9269481bb43df445adf464b06ff031e67d7ea	15-Oct-2009	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
395cef030c99349d238563095adc63ea72641192	18-Sep-2009	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Implement support for DIF Type 2 Add support for 32-byte READ/WRITE as well as DIF Type 2 protection. Reject protected 10/12/16 byte READ/WRITE commands when Type 2 is enabled. Verify Type 2 reference tag according to Expected Initial LBA in 32-byte CDB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
ea61fca58c1373a48c0741798f70364d4498d2af	15-May-2009	Martin K. Petersen <martin.petersen@oracle.com>	scsi_debug: Add support for physical block exponent and alignment This patch adds support for setting the physical block exponent and lowest aligned LBA in the READ CAPACITY(16) response. The B0 VPD page is adjusted accordingly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
73da9c13d4df3c1715029aa45edc78d71b617dfd	23-Apr-2009	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: fix virtual disk larger than 1TB Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
c6a44287417de1625a59f1d4ae52d033c03b9dab	04-Jan-2009	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: DIF/DIX support This patch adds support for DIX and DIF in scsi_debug. A separate buffer is allocated for the protection information. - The dix parameter indicates whether the controller supports DIX (protection information DMA) - The dif parameter indicates whether the simulated storage device supports DIF - The guard parameter switches between T10 CRC(0) and IP checksum(1) - The ato parameter indicates whether the application tag is owned by the disk(0) or the OS(1) - DIF and DIX errors can be triggered using the scsi_debug_opts mask Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
71610f55fa4db63dbf5385929a47c9fb2451f332	03-Dec-2008	Kay Sievers <kay.sievers@vrfy.org>	[SCSI] struct device - replace bus_id with dev_name(), dev_set_name() [jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
cadbd4a5e36dde7e6c49b587b2c419103c0b7218	04-Jul-2008	Harvey Harrison <harvey.harrison@gmail.com>	[SCSI] replace __FUNCTION__ with __func__ [jejb: fixed up a ton of missed conversions. All of you are on notice this has happened, driver trees will now need to be rebased] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: SCSI List <linux-scsi@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
eac6e8e449647cbb9efee53977c8bfee0aa7d69e	19-Jun-2008	Matthew Wilcox <matthew@wil.cx>	[SCSI] scsi_debug: add support for rotation speed Add support for VPD page b1 to scsi_debug SCSI VPD page b1 reports the nominal rotation speed of the device. Since scsi_debug is ram-based, claim to be a non-rotating medium. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
597136ab70a6dccba5c40ee6eed88e881412429b	05-Jun-2008	Martin K. Petersen <martin.petersen@oracle.com>	[SCSI] scsi_debug: Runtime-configurable sector size Make scsi_debug sector size configurable at load time instead of being a #define. Handy for testing 4KB sectors. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
75ad23bc0fcb4f992a5d06982bf0857ab1738e9e	29-Apr-2008	Nick Piggin <npiggin@suse.de>	block: make queue flags non-atomic We can save some atomic ops in the IO path, if we clearly define the rules of how to modify the queue flags. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
8dea0d02f8bb7103ec0818bd2e856f30f2d1bcf1	29-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: remove unnecessary function declarations This patch removes function declarations with moving some functions. This cleans up them a bit to silence checkpatch.pl. There is no functional change. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
5f2578e579ab74b4e3cfd1431bfa976e906594f6	29-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: support large non-fake virtual disk Currently, the maximum amount of RAM that scsi_debug can allocate is 4GB. This patch increases it to 2TB; scsi_debug can allocates 2TB memory and export it as if it were 2TB scsi disk. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
1978910062c38394570c48b3065f37060be31b91	29-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: remove the duplicated code in resp_read and resp_write resp_read and resp_write performs READ_* and WRITE_* commands respectively. This sweeps up the similar code in them. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
28898873b0049d4271c0ff3eb57eb329bbc4d9df	29-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: sweep up sdebug_capacity calculation sdebug_capacity is calculated at five different places. This add a helper function to calculate sdebug_capacity to sweep up the duplicatated code. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
f58b0efbf49ec54c82b8904c64a6498f829e7544	29-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: remove unnecessary sdebug_store_size sdebug_store_size doesn't need to be static global. It's used at startup only. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
d5cdc9898b5589acc77db91a1e9c0feb9f32abef	25-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: fix lba and data length calculation bugs For example, `modprobe scsi_debug virtual_gb=1100` gives: scsi7 : scsi_debug, version 1.81 [20070104], dev_size_mb=8, opts=0x0 scsi 7:0:0:0: Direct-Access Linux scsi_debug 0004 PQ: 0 ANSI: 5 sd 7:0:0:0: [sdc] 2306867200 512-byte hardware sectors (1181116 MB) sd 7:0:0:0: [sdc] Write Protect is off sd 7:0:0:0: [sdc] Mode Sense: 73 00 10 08 sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 7:0:0:0: [sdc] 2306867200 512-byte hardware sectors (1181116 MB) sd 7:0:0:0: [sdc] Write Protect is off sd 7:0:0:0: [sdc] Mode Sense: 73 00 10 08 sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA sdc: unknown partition table sd 7:0:0:0: [sdc] Attached SCSI disk sd 7:0:0:0: Attached scsi generic sg6 type 0 end_request: I/O error, dev sdc, sector 2306867072 Buffer I/O error on device sdc, logical block 288358384 end_request: I/O error, dev sdc, sector 2306867072 Buffer I/O error on device sdc, logical block 288358384 end_request: I/O error, dev sdc, sector 2306867192 (snip) Note that this converts all the calculations (including the correct calculations) for unification. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
a34c4e98367965402134f2e66c3cdc4416f109e4	25-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: use scsi_build_sense_buffer Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
639db475c8bb77f915f79f567ee98ac673d6edf3	20-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: remove unnecessary function declarations This patch removes lots of function declarations with moving scsi_debug_queuecommand. This cleans up scsi_debug_queuecommand a bit to silence checkpatch.pl Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
8b40228f3f5b1fa926c116ec444476d32bc470f6	20-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: use list_for_each_entry_safe This replaces list_for_each_safe and list_entry with list_for_each_entry_safe. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
a75869d1ff73de74249373c2a1d80fbbc3b6c8fc	20-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: remove unnecessary condition test in devInfoReg open_devip is always non NULL. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
5cb2fc06107fe343a9488b32ddf3d9b4596b7090	20-Mar-2008	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>	[SCSI] scsi_debug: create new scsi_debug devices at a single place Two functions, sdebug_add_adapter and devInfoReg, creates new scsi_debug devices. To simplify the code, this patch adds a new helper function to create new scsi_debug devices (sdebug_device_create) and converts both functions to use it. I plan to add more to scsi_debug devices (e.g. using a thread for a scsi_debug device for scalability testings). This patch enable me to add such to just the new helper function instead of touching two functions, sdebug_add_adapter and devInfoReg. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Douglas Gilbert <dougg@torque.net> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>