658b069b7c6b5d91cd89a24dde34ec91918f6e25 |
|
10-May-2012 |
Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> |
USB: gpio_vbus: provide an appropriate debounce interval commit 934ccec4da14dc0586dfe08b36166364bdd2181b upstream. In commit c2344f13b59e007d782a3e591ebc551bc583a8b7 (USB: gpio_vbus: add delayed vbus_session calls, 2009-01-24), usb_gadget_vbus_connect() and ...disconnect() were extracted from the interrupt handler, so to allow vbus_session handlers to deal with msleep() calls. This patch takes the approach one step further. USB2.0 specification (7.1.7.3 Connect and Disconnect Signaling) says that the USB system software (shall) provide a debounce interval with a minimum duration of 100 ms, which ensures that the electrical and mechanical connection is stable before software attempts to reset the attached device. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
662c738d9946de521dcece2b146dced335242389 |
|
29-Feb-2012 |
Heiko Stübner <heiko@sntech.de> |
usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Dima Zavin <dima@android.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
16bc1bb2d87feabe7a69c68c4795b54273ed80f1 |
|
13-Feb-2012 |
Heikki Krogerus <heikki.krogerus@linux.intel.com> |
usb: otg: gpio_vbus: Start using struct usb_otg Use struct usb_otg members with OTG specific functions instead of usb_phy members. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
8675381109b0eb1c948a423c2b35e3f4509cb25e |
|
13-Feb-2012 |
Heikki Krogerus <heikki.krogerus@linux.intel.com> |
usb: otg: Rename otg_transceiver to usb_phy This is the first step in separating USB transceivers from USB OTG utilities. Includes fixes to IMX code from Sascha Hauer. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Acked-by: Li Yang <leoli@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
|
6eb0de827084060e6607c8f8542d9e9566214538 |
|
03-Jul-2011 |
Paul Gortmaker <paul.gortmaker@windriver.com> |
usb: Add module.h to drivers/usb consumers who really use it. The situation up to this point meant that module.h was pretty much everywhere, regardless of whether you asked for it or not. We are fixing that, so give the USB folks who want it an actual include of it. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
2887ba9e3e478522a4a3f1f64506fe1e8b0c740c |
|
02-May-2011 |
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> |
USB: gpio-vbus: ask for vbus_draw regulator before registering xceiv Ask for vbus_draw regulator before registering tranceiver to disallow possible race between registration and set_power/etc. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
c2344f13b59e007d782a3e591ebc551bc583a8b7 |
|
25-Jan-2009 |
Robert Jarzmik <robert.jarzmik@free.fr> |
USB: gpio_vbus: add delayed vbus_session calls Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
6084f1bf0c51a99cbba612ee90a4607cffb8b042 |
|
24-Nov-2008 |
Philipp Zabel <philipp.zabel@gmail.com> |
USB: otg: gpio_vbus transceiver stub gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|