| 4a8a0788a36c923a0229beae5e88d9849e359db5 |
|
10-May-2012 |
Rolf Eike Beer <eike-kernel@sf-tec.de> |
parisc: move definition of PAGE0 to asm/page.h
This was defined in asm/pdc.h which needs to include asm/page.h for
__PAGE_OFFSET. This leads to an include loop so that page.h eventually will
include pdc.h again. While this is no problem because of header guards, it is
a problem because some symbols may be undefined. Such an error is this:
In file included from include/linux/bitops.h:35:0,
from include/asm-generic/getorder.h:7,
from arch/parisc/include/asm/page.h:162,
from arch/parisc/include/asm/pdc.h:346,
from arch/parisc/include/asm/processor.h:16,
from arch/parisc/include/asm/spinlock.h:6,
from arch/parisc/include/asm/atomic.h:20,
from include/linux/atomic.h:4,
from include/linux/sysfs.h:20,
from include/linux/kobject.h:21,
from include/linux/device.h:17,
from include/linux/eisa.h:5,
from arch/parisc/kernel/pci.c:11:
arch/parisc/include/asm/bitops.h: In function ‘set_bit’:
arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration]
arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration]
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/video/console/sticore.c
|
| af901ca181d92aac3a7dc265144a9081a86d8f39 |
|
14-Nov-2009 |
André Goddard Rosa <andre.goddard@gmail.com> |
tree-wide: fix assorted typos all over the place
That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.
Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
/drivers/video/console/sticore.c
|
| 1a1dba32412c15c51d5fc0b9efadd2ea310356d7 |
|
02-Aug-2009 |
Helge Deller <deller@gmx.de> |
parisc: sticore.c - check return values
Signed-off-by: Helge Deller <deller@gmx.de>
/drivers/video/console/sticore.c
|
| fdac4e69a1fc181652b37ce6a32ab8a56b0f3bcf |
|
30-Jul-2008 |
Helge Deller <deller@gmx.de> |
sticore: don't activate unsupported GSC STI cards on HPPA
On HPPA there exists some older GSC graphics cards, which need special
graphic-card-BIOS patching to become supported. Since we don't have yet
implemented the patching, it's better to detect such cards in advance,
inform to the user that there are known problems and to not activate the
card.
Problematic GSC cards and BIOS versions are:
* Hyperdrive/Hyperbowl (A4071A) graphics card series:
* ID = 0x2BCB015A (Version 8.04/8)
* ID = 0x2BCB015A (Version 8.04/11)
* Thunder 1 VISUALIZE 48 card:
* ID = 0x2F23E5FC (Version 8.05/9)
* Thunder 2 VISUALIZE 48 XP card:
* ID = 0x2F8D570E (Version 8.05/12)
* Some Hyperion and ThunderHawk GSC cards
Further details are described here:
http://parisc-linux.org/faq/graphics-howto.html
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/video/console/sticore.c
|
| 3d1e412ac5570a669e1b1fc5fd0f6859250c3d76 |
|
26-Jul-2008 |
Adrian Bunk <bunk@kernel.org> |
video/console/stico{n,re}.c: make code static
This patch makes the following needlessly global code static:
- sticon.c: sticonsole_init()
- sticore.c: struct default_sti
- sticore.c: sti_init_graph()
- sticore.c: sti_inq_conf()
- sticore.c: sti_rom_copy()
- sticore.c: sti_select_fbfont()
- sticore.c: sti_select_font()
- sticore.c: sti_get_wmode_rom()
- sticore.c: sti_read_rom()
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/video/console/sticore.c
|
| 03b18f1b2afeac76840648b4232d8e53cfb7ec84 |
|
29-Jun-2007 |
Kyle McMartin <kyle@parisc-linux.org> |
[PARISC] Clean up sti_flush
sti_flush is supposed to flush the caches so we can execute the STI rom
we copied to memory. Anything more than flush_icache_range is overkill.
Fixes a missing symbol when built as a module.
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
/drivers/video/console/sticore.c
|
| 48a7d5c66b3cecc40364d62cfd54c502c0979561 |
|
27-May-2007 |
Helge Deller <deller@gmx.de> |
[PARISC] fix section mismatch in parisc STI video drivers
Hi Kyle,
this patch fixes various section mismatches in the sti graphics driver:
WARNING: drivers/built-in.o(.text.sticore_pci_init+0xac): Section mismatch: reference to .init.text:sti_try_rom_generic (after 'sticore_pci_init')
WARNING: drivers/built-in.o(.text.sticore_pci_init+0xe4): Section mismatch: reference to .init.text:sticore_check_for_default_sti (after 'sticore_pci_init')
WARNING: drivers/built-in.o(.text.sti_get_rom+0x18): Section mismatch: reference to .init.text:sti_init_roms (after 'sti_get_rom')
(and others).
Basically it's a replacement of __init by __devinit.
Please apply, Helge
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
/drivers/video/console/sticore.c
|
| 2d2699d984924890f6dac8cf51c3b6311f56816c |
|
08-May-2007 |
Antonino A. Daplas <adaplas@gmail.com> |
fbcon: font setting should check limitation of driver
fbcon_set_font() will now check if the new font dimensions can be drawn by the
driver (by checking pixmap.blit_x and blit_y). Similarly, add 2 new
parameters to get_default_font(), font_w and font_h, to further aid in the
font selection process.
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/drivers/video/console/sticore.c
|
| 6ab3d5624e172c553004ecc862bfeac16d9d68b7 |
|
30-Jun-2006 |
Jörn Engel <joern@wohnheim.fh-wedel.de> |
Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
/drivers/video/console/sticore.c
|
| 9b41046cd0ee0a57f849d6e1363f7933e363cca9 |
|
31-Mar-2006 |
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
[PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).
And __setup() is used in obsolete_checksetup().
start_kernel()
-> parse_args()
-> unknown_bootoption()
-> obsolete_checksetup()
If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.
If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func(). If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].
Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.
This patch fixes a wrong usage of it, however fixes obvious one only.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
/drivers/video/console/sticore.c
|
| 857600c77161fd36e30cd6bcca9a0a8676036323 |
|
22-Mar-2006 |
Helge Deller <deller@parisc-linux.org> |
[PARISC] Fix stifb with IOREMAP and a 64-bit kernel
Kill various warnings when built using ioremap.
Remove stifb_{read,write} functions, which are now obsolete (and stack abusers!)
Disable stifb mmap() functionality on a 64-bit kernel, it will crash the
machine.
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
/drivers/video/console/sticore.c
|
| cb6fc18e9ca615f03d18e60c49855b434ca2e51e |
|
17-Jan-2006 |
Helge Deller <deller@parisc-linux.org> |
[PARISC] Use kzalloc and other janitor-style cleanups
Helge,
o Convert a bunch of kmalloc/memset uses to kzalloc.
o pci.c: Add some __read_mostly annotations.
o pci.c: Move constant pci_post_reset_delay to asm/pci.h
o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG.
o Add some consts to perf.c/perf_images.h
Matthew,
o sticore.c: Add some consts to suppress compile warnings.
Signed-off-by: Helge Deller <deller@parisc-linux.org>
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
/drivers/video/console/sticore.c
|
| 951a0150135c46c7791d68e0d1112900d99302d7 |
|
22-Oct-2005 |
Matthew Wilcox <willy@parisc-linux.org> |
[PARISC] Reorganize sticore probe routine to be a little less convoluted
Fix some whitespace issues
Reorganise parisc_device probe routine to be a little less convoluted
Use ->hpa.start instead of ->hpa
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
/drivers/video/console/sticore.c
|
| 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 |
|
17-Apr-2005 |
Linus Torvalds <torvalds@ppc970.osdl.org> |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
/drivers/video/console/sticore.c
|