| c391e1b9ebfe31514fa95a0cdd30c2cbc9652c89 |
|
09-Feb-2012 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
The controller power status flag does not have to be accessed from the
hot-plug detection code any more, it can now be removed from the platform
data and put in the controller private struct.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| c8be24c2afd3ed2445bbf8f542af35a9787fc0e8 |
|
09-Feb-2012 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
If the platform specifies the TMIO_MMC_HAS_COLD_CD flag, use the generic
MMC GPIO card hotplug helper.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| 973ed3af1a570612771ed10dec6506c757767668 |
|
21-Jun-2011 |
Simon Horman <horms@verge.net.au> |
mmc: sdhi: Add write16_hook
Some controllers require waiting for the bus to become idle
before writing to some registers. I have implemented this
by adding a hook to sd_ctrl_write16() and implementing
a hook for SDHI which waits for the bus to become idle.
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| 7311bef0697bcfbbcb898c3c22e61e23f203ae9d |
|
11-May-2011 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: tmio: runtime suspend the controller, where possible
The TMIO MMC controller cannot be powered off to save power, when no
card is plugged in, because then it will not be able to detect a new
card-insertion event. On some implementations, however, it is
possible to switch to using another source to detect card insertion.
This patch adds support for such implementations.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| 845ecd20239c28e97e766ff54078a58be19f3a91 |
|
28-Dec-2010 |
Arnd Hannemann <arnd@arndnet.de> |
mmc: tmio_mmc: implement SDIO IRQ support
This patch implements SDIO IRQ support for mfds which
announce the TMIO_MMC_SDIO_IRQ flag for tmio_mmc.
If MMC_CAP_SDIO_IRQ is also set SDIO IRQ signalling is activated.
Tested with a b43-based wireless SDIO card and sh_mobile_sdhi.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| 93173054f2979de41b1912b19f0b57edfb35fcdc |
|
22-Dec-2010 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: tmio_mmc: implement a bounce buffer for unaligned DMA
For example, with SDIO WLAN cards, some transfers happen with buffers at
odd addresses, whereas the SH-Mobile DMA engine requires even addresses
for SDHI. This patch extends the tmio driver with a bounce buffer, that
is used for single entry scatter-gather lists both for sending and
receiving. If we ever encounter unaligned transfers with multi-element
sg lists, this patch will have to be extended. For now it just falls
back to PIO in this and other unsupported cases.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
/include/linux/mfd/tmio.h
|
| f1334fb3c3006ba109886158c0ad79512f928bc1 |
|
30-Aug-2010 |
Yusuke Goda <yusuke.goda.sx@renesas.com> |
mmc: Allow 2 byte requests in 4-bit mode for tmio_mmc
Adjust the tmio_mmc block size check to accept 2-byte requests in 4-bit
mode if the hardware supports it.
Tested with the SDHI hardware block included in sh7724.
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Matt Fleming <matt@console-pimps.org>
Acked-by: Magnus Damm <damm@opensource.se>
Tested-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| 19ca7502c508595edfb963e5dbcf62854a926506 |
|
24-Aug-2010 |
Arnd Hannemann <arnd@arndnet.de> |
mmc: Allow the tmio_mmc mfd driver to specify get_cd handler
Some controllers, supported by the tmio_mmc driver do not have the card
detect pin of a slot connected, so that polling needs to be used and
card detection is handled by other means.
This patch exposes a get_cd hook for that purpose.
Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| a2b14dc9615c215a8cf4f2041f6c0c3fff5fc486 |
|
19-May-2010 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: let MFD's provide supported Vdd card voltages to tmio_mmc
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
/include/linux/mfd/tmio.h
|
| ac8fb3e8627d5494f3d2221925a82be4c1778b0e |
|
19-May-2010 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
tmio: add a platform flag to disable card write-protection detection
Write-protection status is not always available, e.g., micro-SD cards do not
have a write-protection switch at all. This patch adds a flag to let platforms
force tmio_mmc to consider the card writable.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
/include/linux/mfd/tmio.h
|
| 42a4533976d922ff3272fad17dd52fe3682899dd |
|
19-May-2010 |
Guennadi Liakhovetski <g.liakhovetski@gmx.de> |
mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell
After this patch, if the "dma" pointer in struct tmio_mmc_data is not NULL, it
points to a struct, containing two tokens, that have to be passed to the
dmaengine driver for channel configuration.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
/include/linux/mfd/tmio.h
|
| 707f0b2fbc65876e8abd94d26d8d0620600c05d4 |
|
17-Feb-2010 |
Magnus Damm <damm@opensource.se> |
tmio_mmc: Remove const from platform data V3
Remove const from the tmio-mmc platform data hclk V3.
This change makes it possible to remove the type cast
from the sh_mobile_sdhi driver which is using the clock
framework to get the clock rate.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| b741d440a97c376af309e902eeb2f3c5673d2c92 |
|
17-Feb-2010 |
Yusuke Goda <goda.yusuke@renesas.com> |
tmio_mmc: Add MMC_CAP_MMC_HIGHSPEED support V2
Enable MMC_CAP_XX support in the tmio_mmc driver if
pdata->capabilities is set.
Signed-off-by: Yusuke Goda <goda.yusuke@renesas.com>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| 64e8867ba8098b69889c1af94997a5ba2348fb26 |
|
06-Jan-2010 |
Ian Molton <ian@mnementh.co.uk> |
mfd: tmio_mmc hardware abstraction for CNF area
This patch abstracts out the CNF area code from tmio_mmc which
is not present in all hardware that can use this driver. This
is required so that we can support non-toshiba based hardware.
ASIC3 support by Philipp Zabel
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| 4d3792e054f706f73837769a0e5607b3b7ad25a2 |
|
15-Jun-2009 |
Samuel Ortiz <sameo@linux.intel.com> |
mfd: fix tmio related warnings
We can not have .driver_data as const since platform_set_drvdata() doesnt take
a const.
The hclk mmc_data field can be const though.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
/include/linux/mfd/tmio.h
|
| f0e46cc4971f6be96010d9248e0fc076b229d989 |
|
04-Jun-2009 |
Philipp Zabel <philipp.zabel@gmail.com> |
MFD,mmc: tmio_mmc: make HCLK configurable
The Toshiba parts all have a 24 MHz HCLK, but HTC ASIC3 has a 24.576 MHz HCLK
and AMD Imageon w228x's HCLK is 80 MHz. With this patch, the MFD driver
provides the HCLK frequency to tmio_mmc via mfd_cell->driver_data.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
/include/linux/mfd/tmio.h
|
| b53cde3557b8f97e6a635782875d442551a89bf1 |
|
16-Oct-2008 |
Dmitry Baryshkov <dbaryshkov@gmail.com> |
fbdev: add new TMIO framebuffer driver
Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB
chips.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/include/linux/mfd/tmio.h
|
| d3a2f71853ce543c5515d4982e202751e15b0b6d |
|
31-Jul-2008 |
Ian Molton <spyro@f2s.com> |
mfd: TMIO MMC structures and accessors.
Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
/include/linux/mfd/tmio.h
|
| f024ff10b1ab13da4d626366019fd05c49721af7 |
|
27-Jun-2008 |
Dmitry Baryshkov <dbaryshkov@gmail.com> |
[ARM] 5128/1: tc6393xb: tmio-nand support
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
/include/linux/mfd/tmio.h
|