1/* 2 * linux/arch/arm/mach-mx1/mach-scb9328.c 3 * 4 * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> 5 * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 */ 12 13#include <linux/platform_device.h> 14#include <linux/mtd/physmap.h> 15#include <linux/interrupt.h> 16#include <linux/dm9000.h> 17 18#include <asm/mach-types.h> 19#include <asm/mach/arch.h> 20#include <asm/mach/time.h> 21 22#include <mach/common.h> 23#include <mach/hardware.h> 24#include <mach/irqs.h> 25#include <mach/iomux-mx1.h> 26 27#include "devices-imx1.h" 28 29/* 30 * This scb9328 has a 32MiB flash 31 */ 32static struct resource flash_resource = { 33 .start = MX1_CS0_PHYS, 34 .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, 35 .flags = IORESOURCE_MEM, 36}; 37 38static struct physmap_flash_data scb_flash_data = { 39 .width = 2, 40}; 41 42static struct platform_device scb_flash_device = { 43 .name = "physmap-flash", 44 .id = 0, 45 .dev = { 46 .platform_data = &scb_flash_data, 47 }, 48 .resource = &flash_resource, 49 .num_resources = 1, 50}; 51 52/* 53 * scb9328 has a DM9000 network controller 54 * connected to CS5, with 16 bit data path 55 * and interrupt connected to GPIO 3 56 */ 57 58/* 59 * internal datapath is fixed 16 bit 60 */ 61static struct dm9000_plat_data dm9000_platdata = { 62 .flags = DM9000_PLATF_16BITONLY, 63}; 64 65/* 66 * the DM9000 drivers wants two defined address spaces 67 * to gain access to address latch registers and the data path. 68 */ 69static struct resource dm9000x_resources[] = { 70 { 71 .name = "address area", 72 .start = MX1_CS5_PHYS, 73 .end = MX1_CS5_PHYS + 1, 74 .flags = IORESOURCE_MEM, /* address access */ 75 }, { 76 .name = "data area", 77 .start = MX1_CS5_PHYS + 4, 78 .end = MX1_CS5_PHYS + 5, 79 .flags = IORESOURCE_MEM, /* data access */ 80 }, { 81 .start = IRQ_GPIOC(3), 82 .end = IRQ_GPIOC(3), 83 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, 84 }, 85}; 86 87static struct platform_device dm9000x_device = { 88 .name = "dm9000", 89 .id = 0, 90 .num_resources = ARRAY_SIZE(dm9000x_resources), 91 .resource = dm9000x_resources, 92 .dev = { 93 .platform_data = &dm9000_platdata, 94 } 95}; 96 97static const int mxc_uart1_pins[] = { 98 PC9_PF_UART1_CTS, 99 PC10_PF_UART1_RTS, 100 PC11_PF_UART1_TXD, 101 PC12_PF_UART1_RXD, 102}; 103 104static const struct imxuart_platform_data uart_pdata __initconst = { 105 .flags = IMXUART_HAVE_RTSCTS, 106}; 107 108static struct platform_device *devices[] __initdata = { 109 &scb_flash_device, 110 &dm9000x_device, 111}; 112 113/* 114 * scb9328_init - Init the CPU card itself 115 */ 116static void __init scb9328_init(void) 117{ 118 imx1_soc_init(); 119 120 mxc_gpio_setup_multiple_pins(mxc_uart1_pins, 121 ARRAY_SIZE(mxc_uart1_pins), "UART1"); 122 123 imx1_add_imx_uart0(&uart_pdata); 124 125 printk(KERN_INFO"Scb9328: Adding devices\n"); 126 platform_add_devices(devices, ARRAY_SIZE(devices)); 127} 128 129static void __init scb9328_timer_init(void) 130{ 131 mx1_clocks_init(32000); 132} 133 134static struct sys_timer scb9328_timer = { 135 .init = scb9328_timer_init, 136}; 137 138MACHINE_START(SCB9328, "Synertronixx scb9328") 139 /* Sascha Hauer */ 140 .atag_offset = 100, 141 .map_io = mx1_map_io, 142 .init_early = imx1_init_early, 143 .init_irq = mx1_init_irq, 144 .handle_irq = imx1_handle_irq, 145 .timer = &scb9328_timer, 146 .init_machine = scb9328_init, 147 .restart = mxc_restart, 148MACHINE_END 149