1/* 2 * TI DAVINCI I2C adapter driver. 3 * 4 * Copyright (C) 2006 Texas Instruments. 5 * Copyright (C) 2007 MontaVista Software Inc. 6 * 7 * Updated by Vinod & Sudhakar Feb 2005 8 * 9 * ---------------------------------------------------------------------------- 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 * ---------------------------------------------------------------------------- 25 * 26 */ 27#include <linux/kernel.h> 28#include <linux/module.h> 29#include <linux/delay.h> 30#include <linux/i2c.h> 31#include <linux/clk.h> 32#include <linux/errno.h> 33#include <linux/sched.h> 34#include <linux/err.h> 35#include <linux/interrupt.h> 36#include <linux/platform_device.h> 37#include <linux/io.h> 38#include <linux/slab.h> 39#include <linux/cpufreq.h> 40#include <linux/gpio.h> 41 42#include <mach/hardware.h> 43#include <mach/i2c.h> 44 45/* ----- global defines ----------------------------------------------- */ 46 47#define DAVINCI_I2C_TIMEOUT (1*HZ) 48#define DAVINCI_I2C_MAX_TRIES 2 49#define I2C_DAVINCI_INTR_ALL (DAVINCI_I2C_IMR_AAS | \ 50 DAVINCI_I2C_IMR_SCD | \ 51 DAVINCI_I2C_IMR_ARDY | \ 52 DAVINCI_I2C_IMR_NACK | \ 53 DAVINCI_I2C_IMR_AL) 54 55#define DAVINCI_I2C_OAR_REG 0x00 56#define DAVINCI_I2C_IMR_REG 0x04 57#define DAVINCI_I2C_STR_REG 0x08 58#define DAVINCI_I2C_CLKL_REG 0x0c 59#define DAVINCI_I2C_CLKH_REG 0x10 60#define DAVINCI_I2C_CNT_REG 0x14 61#define DAVINCI_I2C_DRR_REG 0x18 62#define DAVINCI_I2C_SAR_REG 0x1c 63#define DAVINCI_I2C_DXR_REG 0x20 64#define DAVINCI_I2C_MDR_REG 0x24 65#define DAVINCI_I2C_IVR_REG 0x28 66#define DAVINCI_I2C_EMDR_REG 0x2c 67#define DAVINCI_I2C_PSC_REG 0x30 68 69#define DAVINCI_I2C_IVR_AAS 0x07 70#define DAVINCI_I2C_IVR_SCD 0x06 71#define DAVINCI_I2C_IVR_XRDY 0x05 72#define DAVINCI_I2C_IVR_RDR 0x04 73#define DAVINCI_I2C_IVR_ARDY 0x03 74#define DAVINCI_I2C_IVR_NACK 0x02 75#define DAVINCI_I2C_IVR_AL 0x01 76 77#define DAVINCI_I2C_STR_BB BIT(12) 78#define DAVINCI_I2C_STR_RSFULL BIT(11) 79#define DAVINCI_I2C_STR_SCD BIT(5) 80#define DAVINCI_I2C_STR_ARDY BIT(2) 81#define DAVINCI_I2C_STR_NACK BIT(1) 82#define DAVINCI_I2C_STR_AL BIT(0) 83 84#define DAVINCI_I2C_MDR_NACK BIT(15) 85#define DAVINCI_I2C_MDR_STT BIT(13) 86#define DAVINCI_I2C_MDR_STP BIT(11) 87#define DAVINCI_I2C_MDR_MST BIT(10) 88#define DAVINCI_I2C_MDR_TRX BIT(9) 89#define DAVINCI_I2C_MDR_XA BIT(8) 90#define DAVINCI_I2C_MDR_RM BIT(7) 91#define DAVINCI_I2C_MDR_IRS BIT(5) 92 93#define DAVINCI_I2C_IMR_AAS BIT(6) 94#define DAVINCI_I2C_IMR_SCD BIT(5) 95#define DAVINCI_I2C_IMR_XRDY BIT(4) 96#define DAVINCI_I2C_IMR_RRDY BIT(3) 97#define DAVINCI_I2C_IMR_ARDY BIT(2) 98#define DAVINCI_I2C_IMR_NACK BIT(1) 99#define DAVINCI_I2C_IMR_AL BIT(0) 100 101struct davinci_i2c_dev { 102 struct device *dev; 103 void __iomem *base; 104 struct completion cmd_complete; 105 struct clk *clk; 106 int cmd_err; 107 u8 *buf; 108 size_t buf_len; 109 int irq; 110 int stop; 111 u8 terminate; 112 struct i2c_adapter adapter; 113#ifdef CONFIG_CPU_FREQ 114 struct completion xfr_complete; 115 struct notifier_block freq_transition; 116#endif 117}; 118 119/* default platform data to use if not supplied in the platform_device */ 120static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = { 121 .bus_freq = 100, 122 .bus_delay = 0, 123}; 124 125static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev, 126 int reg, u16 val) 127{ 128 __raw_writew(val, i2c_dev->base + reg); 129} 130 131static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg) 132{ 133 return __raw_readw(i2c_dev->base + reg); 134} 135 136/* Generate a pulse on the i2c clock pin. */ 137static void generic_i2c_clock_pulse(unsigned int scl_pin) 138{ 139 u16 i; 140 141 if (scl_pin) { 142 /* Send high and low on the SCL line */ 143 for (i = 0; i < 9; i++) { 144 gpio_set_value(scl_pin, 0); 145 udelay(20); 146 gpio_set_value(scl_pin, 1); 147 udelay(20); 148 } 149 } 150} 151 152/* This routine does i2c bus recovery as specified in the 153 * i2c protocol Rev. 03 section 3.16 titled "Bus clear" 154 */ 155static void i2c_recover_bus(struct davinci_i2c_dev *dev) 156{ 157 u32 flag = 0; 158 struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; 159 160 dev_err(dev->dev, "initiating i2c bus recovery\n"); 161 /* Send NACK to the slave */ 162 flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 163 flag |= DAVINCI_I2C_MDR_NACK; 164 /* write the data into mode register */ 165 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 166 if (pdata) 167 generic_i2c_clock_pulse(pdata->scl_pin); 168 /* Send STOP */ 169 flag = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 170 flag |= DAVINCI_I2C_MDR_STP; 171 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 172} 173 174static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev, 175 int val) 176{ 177 u16 w; 178 179 w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG); 180 if (!val) /* put I2C into reset */ 181 w &= ~DAVINCI_I2C_MDR_IRS; 182 else /* take I2C out of reset */ 183 w |= DAVINCI_I2C_MDR_IRS; 184 185 davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w); 186} 187 188static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev) 189{ 190 struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; 191 u16 psc; 192 u32 clk; 193 u32 d; 194 u32 clkh; 195 u32 clkl; 196 u32 input_clock = clk_get_rate(dev->clk); 197 198 /* NOTE: I2C Clock divider programming info 199 * As per I2C specs the following formulas provide prescaler 200 * and low/high divider values 201 * input clk --> PSC Div -----------> ICCL/H Div --> output clock 202 * module clk 203 * 204 * output clk = module clk / (PSC + 1) [ (ICCL + d) + (ICCH + d) ] 205 * 206 * Thus, 207 * (ICCL + ICCH) = clk = (input clk / ((psc +1) * output clk)) - 2d; 208 * 209 * where if PSC == 0, d = 7, 210 * if PSC == 1, d = 6 211 * if PSC > 1 , d = 5 212 */ 213 214 /* get minimum of 7 MHz clock, but max of 12 MHz */ 215 psc = (input_clock / 7000000) - 1; 216 if ((input_clock / (psc + 1)) > 12000000) 217 psc++; /* better to run under spec than over */ 218 d = (psc >= 2) ? 5 : 7 - psc; 219 220 clk = ((input_clock / (psc + 1)) / (pdata->bus_freq * 1000)) - (d << 1); 221 clkh = clk >> 1; 222 clkl = clk - clkh; 223 224 davinci_i2c_write_reg(dev, DAVINCI_I2C_PSC_REG, psc); 225 davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh); 226 davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl); 227 228 dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk); 229} 230 231/* 232 * This function configures I2C and brings I2C out of reset. 233 * This function is called during I2C init function. This function 234 * also gets called if I2C encounters any errors. 235 */ 236static int i2c_davinci_init(struct davinci_i2c_dev *dev) 237{ 238 struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; 239 240 if (!pdata) 241 pdata = &davinci_i2c_platform_data_default; 242 243 /* put I2C into reset */ 244 davinci_i2c_reset_ctrl(dev, 0); 245 246 /* compute clock dividers */ 247 i2c_davinci_calc_clk_dividers(dev); 248 249 /* Respond at reserved "SMBus Host" slave address" (and zero); 250 * we seem to have no option to not respond... 251 */ 252 davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08); 253 254 dev_dbg(dev->dev, "PSC = %d\n", 255 davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG)); 256 dev_dbg(dev->dev, "CLKL = %d\n", 257 davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG)); 258 dev_dbg(dev->dev, "CLKH = %d\n", 259 davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG)); 260 dev_dbg(dev->dev, "bus_freq = %dkHz, bus_delay = %d\n", 261 pdata->bus_freq, pdata->bus_delay); 262 263 /* Take the I2C module out of reset: */ 264 davinci_i2c_reset_ctrl(dev, 1); 265 266 /* Enable interrupts */ 267 davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL); 268 269 return 0; 270} 271 272/* 273 * Waiting for bus not busy 274 */ 275static int i2c_davinci_wait_bus_not_busy(struct davinci_i2c_dev *dev, 276 char allow_sleep) 277{ 278 unsigned long timeout; 279 static u16 to_cnt; 280 281 timeout = jiffies + dev->adapter.timeout; 282 while (davinci_i2c_read_reg(dev, DAVINCI_I2C_STR_REG) 283 & DAVINCI_I2C_STR_BB) { 284 if (to_cnt <= DAVINCI_I2C_MAX_TRIES) { 285 if (time_after(jiffies, timeout)) { 286 dev_warn(dev->dev, 287 "timeout waiting for bus ready\n"); 288 to_cnt++; 289 return -ETIMEDOUT; 290 } else { 291 to_cnt = 0; 292 i2c_recover_bus(dev); 293 i2c_davinci_init(dev); 294 } 295 } 296 if (allow_sleep) 297 schedule_timeout(1); 298 } 299 300 return 0; 301} 302 303/* 304 * Low level master read/write transaction. This function is called 305 * from i2c_davinci_xfer. 306 */ 307static int 308i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop) 309{ 310 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 311 struct davinci_i2c_platform_data *pdata = dev->dev->platform_data; 312 u32 flag; 313 u16 w; 314 int r; 315 316 if (!pdata) 317 pdata = &davinci_i2c_platform_data_default; 318 /* Introduce a delay, required for some boards (e.g Davinci EVM) */ 319 if (pdata->bus_delay) 320 udelay(pdata->bus_delay); 321 322 /* set the slave address */ 323 davinci_i2c_write_reg(dev, DAVINCI_I2C_SAR_REG, msg->addr); 324 325 dev->buf = msg->buf; 326 dev->buf_len = msg->len; 327 dev->stop = stop; 328 329 davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len); 330 331 INIT_COMPLETION(dev->cmd_complete); 332 dev->cmd_err = 0; 333 334 /* Take I2C out of reset and configure it as master */ 335 flag = DAVINCI_I2C_MDR_IRS | DAVINCI_I2C_MDR_MST; 336 337 /* if the slave address is ten bit address, enable XA bit */ 338 if (msg->flags & I2C_M_TEN) 339 flag |= DAVINCI_I2C_MDR_XA; 340 if (!(msg->flags & I2C_M_RD)) 341 flag |= DAVINCI_I2C_MDR_TRX; 342 if (msg->len == 0) 343 flag |= DAVINCI_I2C_MDR_RM; 344 345 /* Enable receive or transmit interrupts */ 346 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_IMR_REG); 347 if (msg->flags & I2C_M_RD) 348 w |= DAVINCI_I2C_IMR_RRDY; 349 else 350 w |= DAVINCI_I2C_IMR_XRDY; 351 davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, w); 352 353 dev->terminate = 0; 354 355 /* 356 * Write mode register first as needed for correct behaviour 357 * on OMAP-L138, but don't set STT yet to avoid a race with XRDY 358 * occurring before we have loaded DXR 359 */ 360 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 361 362 /* 363 * First byte should be set here, not after interrupt, 364 * because transmit-data-ready interrupt can come before 365 * NACK-interrupt during sending of previous message and 366 * ICDXR may have wrong data 367 * It also saves us one interrupt, slightly faster 368 */ 369 if ((!(msg->flags & I2C_M_RD)) && dev->buf_len) { 370 davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, *dev->buf++); 371 dev->buf_len--; 372 } 373 374 /* Set STT to begin transmit now DXR is loaded */ 375 flag |= DAVINCI_I2C_MDR_STT; 376 if (stop && msg->len != 0) 377 flag |= DAVINCI_I2C_MDR_STP; 378 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag); 379 380 r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, 381 dev->adapter.timeout); 382 if (r == 0) { 383 dev_err(dev->dev, "controller timed out\n"); 384 i2c_recover_bus(dev); 385 i2c_davinci_init(dev); 386 dev->buf_len = 0; 387 return -ETIMEDOUT; 388 } 389 if (dev->buf_len) { 390 /* This should be 0 if all bytes were transferred 391 * or dev->cmd_err denotes an error. 392 * A signal may have aborted the transfer. 393 */ 394 if (r >= 0) { 395 dev_err(dev->dev, "abnormal termination buf_len=%i\n", 396 dev->buf_len); 397 r = -EREMOTEIO; 398 } 399 dev->terminate = 1; 400 wmb(); 401 dev->buf_len = 0; 402 } 403 if (r < 0) 404 return r; 405 406 /* no error */ 407 if (likely(!dev->cmd_err)) 408 return msg->len; 409 410 /* We have an error */ 411 if (dev->cmd_err & DAVINCI_I2C_STR_AL) { 412 i2c_davinci_init(dev); 413 return -EIO; 414 } 415 416 if (dev->cmd_err & DAVINCI_I2C_STR_NACK) { 417 if (msg->flags & I2C_M_IGNORE_NAK) 418 return msg->len; 419 if (stop) { 420 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 421 w |= DAVINCI_I2C_MDR_STP; 422 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 423 } 424 return -EREMOTEIO; 425 } 426 return -EIO; 427} 428 429/* 430 * Prepare controller for a transaction and call i2c_davinci_xfer_msg 431 */ 432static int 433i2c_davinci_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) 434{ 435 struct davinci_i2c_dev *dev = i2c_get_adapdata(adap); 436 int i; 437 int ret; 438 439 dev_dbg(dev->dev, "%s: msgs: %d\n", __func__, num); 440 441 ret = i2c_davinci_wait_bus_not_busy(dev, 1); 442 if (ret < 0) { 443 dev_warn(dev->dev, "timeout waiting for bus ready\n"); 444 return ret; 445 } 446 447 for (i = 0; i < num; i++) { 448 ret = i2c_davinci_xfer_msg(adap, &msgs[i], (i == (num - 1))); 449 dev_dbg(dev->dev, "%s [%d/%d] ret: %d\n", __func__, i + 1, num, 450 ret); 451 if (ret < 0) 452 return ret; 453 } 454 455#ifdef CONFIG_CPU_FREQ 456 complete(&dev->xfr_complete); 457#endif 458 459 return num; 460} 461 462static u32 i2c_davinci_func(struct i2c_adapter *adap) 463{ 464 return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; 465} 466 467static void terminate_read(struct davinci_i2c_dev *dev) 468{ 469 u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 470 w |= DAVINCI_I2C_MDR_NACK; 471 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 472 473 /* Throw away data */ 474 davinci_i2c_read_reg(dev, DAVINCI_I2C_DRR_REG); 475 if (!dev->terminate) 476 dev_err(dev->dev, "RDR IRQ while no data requested\n"); 477} 478static void terminate_write(struct davinci_i2c_dev *dev) 479{ 480 u16 w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG); 481 w |= DAVINCI_I2C_MDR_RM | DAVINCI_I2C_MDR_STP; 482 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w); 483 484 if (!dev->terminate) 485 dev_dbg(dev->dev, "TDR IRQ while no data to send\n"); 486} 487 488/* 489 * Interrupt service routine. This gets called whenever an I2C interrupt 490 * occurs. 491 */ 492static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) 493{ 494 struct davinci_i2c_dev *dev = dev_id; 495 u32 stat; 496 int count = 0; 497 u16 w; 498 499 while ((stat = davinci_i2c_read_reg(dev, DAVINCI_I2C_IVR_REG))) { 500 dev_dbg(dev->dev, "%s: stat=0x%x\n", __func__, stat); 501 if (count++ == 100) { 502 dev_warn(dev->dev, "Too much work in one IRQ\n"); 503 break; 504 } 505 506 switch (stat) { 507 case DAVINCI_I2C_IVR_AL: 508 /* Arbitration lost, must retry */ 509 dev->cmd_err |= DAVINCI_I2C_STR_AL; 510 dev->buf_len = 0; 511 complete(&dev->cmd_complete); 512 break; 513 514 case DAVINCI_I2C_IVR_NACK: 515 dev->cmd_err |= DAVINCI_I2C_STR_NACK; 516 dev->buf_len = 0; 517 complete(&dev->cmd_complete); 518 break; 519 520 case DAVINCI_I2C_IVR_ARDY: 521 davinci_i2c_write_reg(dev, 522 DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_ARDY); 523 if (((dev->buf_len == 0) && (dev->stop != 0)) || 524 (dev->cmd_err & DAVINCI_I2C_STR_NACK)) { 525 w = davinci_i2c_read_reg(dev, 526 DAVINCI_I2C_MDR_REG); 527 w |= DAVINCI_I2C_MDR_STP; 528 davinci_i2c_write_reg(dev, 529 DAVINCI_I2C_MDR_REG, w); 530 } 531 complete(&dev->cmd_complete); 532 break; 533 534 case DAVINCI_I2C_IVR_RDR: 535 if (dev->buf_len) { 536 *dev->buf++ = 537 davinci_i2c_read_reg(dev, 538 DAVINCI_I2C_DRR_REG); 539 dev->buf_len--; 540 if (dev->buf_len) 541 continue; 542 543 davinci_i2c_write_reg(dev, 544 DAVINCI_I2C_STR_REG, 545 DAVINCI_I2C_IMR_RRDY); 546 } else { 547 /* signal can terminate transfer */ 548 terminate_read(dev); 549 } 550 break; 551 552 case DAVINCI_I2C_IVR_XRDY: 553 if (dev->buf_len) { 554 davinci_i2c_write_reg(dev, DAVINCI_I2C_DXR_REG, 555 *dev->buf++); 556 dev->buf_len--; 557 if (dev->buf_len) 558 continue; 559 560 w = davinci_i2c_read_reg(dev, 561 DAVINCI_I2C_IMR_REG); 562 w &= ~DAVINCI_I2C_IMR_XRDY; 563 davinci_i2c_write_reg(dev, 564 DAVINCI_I2C_IMR_REG, 565 w); 566 } else { 567 /* signal can terminate transfer */ 568 terminate_write(dev); 569 } 570 break; 571 572 case DAVINCI_I2C_IVR_SCD: 573 davinci_i2c_write_reg(dev, 574 DAVINCI_I2C_STR_REG, DAVINCI_I2C_STR_SCD); 575 complete(&dev->cmd_complete); 576 break; 577 578 case DAVINCI_I2C_IVR_AAS: 579 dev_dbg(dev->dev, "Address as slave interrupt\n"); 580 break; 581 582 default: 583 dev_warn(dev->dev, "Unrecognized irq stat %d\n", stat); 584 break; 585 } 586 } 587 588 return count ? IRQ_HANDLED : IRQ_NONE; 589} 590 591#ifdef CONFIG_CPU_FREQ 592static int i2c_davinci_cpufreq_transition(struct notifier_block *nb, 593 unsigned long val, void *data) 594{ 595 struct davinci_i2c_dev *dev; 596 597 dev = container_of(nb, struct davinci_i2c_dev, freq_transition); 598 if (val == CPUFREQ_PRECHANGE) { 599 wait_for_completion(&dev->xfr_complete); 600 davinci_i2c_reset_ctrl(dev, 0); 601 } else if (val == CPUFREQ_POSTCHANGE) { 602 i2c_davinci_calc_clk_dividers(dev); 603 davinci_i2c_reset_ctrl(dev, 1); 604 } 605 606 return 0; 607} 608 609static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev) 610{ 611 dev->freq_transition.notifier_call = i2c_davinci_cpufreq_transition; 612 613 return cpufreq_register_notifier(&dev->freq_transition, 614 CPUFREQ_TRANSITION_NOTIFIER); 615} 616 617static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev) 618{ 619 cpufreq_unregister_notifier(&dev->freq_transition, 620 CPUFREQ_TRANSITION_NOTIFIER); 621} 622#else 623static inline int i2c_davinci_cpufreq_register(struct davinci_i2c_dev *dev) 624{ 625 return 0; 626} 627 628static inline void i2c_davinci_cpufreq_deregister(struct davinci_i2c_dev *dev) 629{ 630} 631#endif 632 633static struct i2c_algorithm i2c_davinci_algo = { 634 .master_xfer = i2c_davinci_xfer, 635 .functionality = i2c_davinci_func, 636}; 637 638static int davinci_i2c_probe(struct platform_device *pdev) 639{ 640 struct davinci_i2c_dev *dev; 641 struct i2c_adapter *adap; 642 struct resource *mem, *irq, *ioarea; 643 int r; 644 645 /* NOTE: driver uses the static register mapping */ 646 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 647 if (!mem) { 648 dev_err(&pdev->dev, "no mem resource?\n"); 649 return -ENODEV; 650 } 651 652 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); 653 if (!irq) { 654 dev_err(&pdev->dev, "no irq resource?\n"); 655 return -ENODEV; 656 } 657 658 ioarea = request_mem_region(mem->start, resource_size(mem), 659 pdev->name); 660 if (!ioarea) { 661 dev_err(&pdev->dev, "I2C region already claimed\n"); 662 return -EBUSY; 663 } 664 665 dev = kzalloc(sizeof(struct davinci_i2c_dev), GFP_KERNEL); 666 if (!dev) { 667 r = -ENOMEM; 668 goto err_release_region; 669 } 670 671 init_completion(&dev->cmd_complete); 672#ifdef CONFIG_CPU_FREQ 673 init_completion(&dev->xfr_complete); 674#endif 675 dev->dev = get_device(&pdev->dev); 676 dev->irq = irq->start; 677 platform_set_drvdata(pdev, dev); 678 679 dev->clk = clk_get(&pdev->dev, NULL); 680 if (IS_ERR(dev->clk)) { 681 r = -ENODEV; 682 goto err_free_mem; 683 } 684 clk_enable(dev->clk); 685 686 dev->base = ioremap(mem->start, resource_size(mem)); 687 if (!dev->base) { 688 r = -EBUSY; 689 goto err_mem_ioremap; 690 } 691 692 i2c_davinci_init(dev); 693 694 r = request_irq(dev->irq, i2c_davinci_isr, 0, pdev->name, dev); 695 if (r) { 696 dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); 697 goto err_unuse_clocks; 698 } 699 700 r = i2c_davinci_cpufreq_register(dev); 701 if (r) { 702 dev_err(&pdev->dev, "failed to register cpufreq\n"); 703 goto err_free_irq; 704 } 705 706 adap = &dev->adapter; 707 i2c_set_adapdata(adap, dev); 708 adap->owner = THIS_MODULE; 709 adap->class = I2C_CLASS_HWMON; 710 strlcpy(adap->name, "DaVinci I2C adapter", sizeof(adap->name)); 711 adap->algo = &i2c_davinci_algo; 712 adap->dev.parent = &pdev->dev; 713 adap->timeout = DAVINCI_I2C_TIMEOUT; 714 715 adap->nr = pdev->id; 716 r = i2c_add_numbered_adapter(adap); 717 if (r) { 718 dev_err(&pdev->dev, "failure adding adapter\n"); 719 goto err_free_irq; 720 } 721 722 return 0; 723 724err_free_irq: 725 free_irq(dev->irq, dev); 726err_unuse_clocks: 727 iounmap(dev->base); 728err_mem_ioremap: 729 clk_disable(dev->clk); 730 clk_put(dev->clk); 731 dev->clk = NULL; 732err_free_mem: 733 platform_set_drvdata(pdev, NULL); 734 put_device(&pdev->dev); 735 kfree(dev); 736err_release_region: 737 release_mem_region(mem->start, resource_size(mem)); 738 739 return r; 740} 741 742static int davinci_i2c_remove(struct platform_device *pdev) 743{ 744 struct davinci_i2c_dev *dev = platform_get_drvdata(pdev); 745 struct resource *mem; 746 747 i2c_davinci_cpufreq_deregister(dev); 748 749 platform_set_drvdata(pdev, NULL); 750 i2c_del_adapter(&dev->adapter); 751 put_device(&pdev->dev); 752 753 clk_disable(dev->clk); 754 clk_put(dev->clk); 755 dev->clk = NULL; 756 757 davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, 0); 758 free_irq(dev->irq, dev); 759 iounmap(dev->base); 760 kfree(dev); 761 762 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); 763 release_mem_region(mem->start, resource_size(mem)); 764 return 0; 765} 766 767#ifdef CONFIG_PM 768static int davinci_i2c_suspend(struct device *dev) 769{ 770 struct platform_device *pdev = to_platform_device(dev); 771 struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); 772 773 /* put I2C into reset */ 774 davinci_i2c_reset_ctrl(i2c_dev, 0); 775 clk_disable(i2c_dev->clk); 776 777 return 0; 778} 779 780static int davinci_i2c_resume(struct device *dev) 781{ 782 struct platform_device *pdev = to_platform_device(dev); 783 struct davinci_i2c_dev *i2c_dev = platform_get_drvdata(pdev); 784 785 clk_enable(i2c_dev->clk); 786 /* take I2C out of reset */ 787 davinci_i2c_reset_ctrl(i2c_dev, 1); 788 789 return 0; 790} 791 792static const struct dev_pm_ops davinci_i2c_pm = { 793 .suspend = davinci_i2c_suspend, 794 .resume = davinci_i2c_resume, 795}; 796 797#define davinci_i2c_pm_ops (&davinci_i2c_pm) 798#else 799#define davinci_i2c_pm_ops NULL 800#endif 801 802/* work with hotplug and coldplug */ 803MODULE_ALIAS("platform:i2c_davinci"); 804 805static struct platform_driver davinci_i2c_driver = { 806 .probe = davinci_i2c_probe, 807 .remove = davinci_i2c_remove, 808 .driver = { 809 .name = "i2c_davinci", 810 .owner = THIS_MODULE, 811 .pm = davinci_i2c_pm_ops, 812 }, 813}; 814 815/* I2C may be needed to bring up other drivers */ 816static int __init davinci_i2c_init_driver(void) 817{ 818 return platform_driver_register(&davinci_i2c_driver); 819} 820subsys_initcall(davinci_i2c_init_driver); 821 822static void __exit davinci_i2c_exit_driver(void) 823{ 824 platform_driver_unregister(&davinci_i2c_driver); 825} 826module_exit(davinci_i2c_exit_driver); 827 828MODULE_AUTHOR("Texas Instruments India"); 829MODULE_DESCRIPTION("TI DaVinci I2C bus adapter"); 830MODULE_LICENSE("GPL"); 831