1#
2# Arcnet configuration
3#
4
5menuconfig ARCNET
6	depends on NETDEVICES && (ISA || PCI || PCMCIA)
7	tristate "ARCnet support"
8	---help---
9	  If you have a network card of this type, say Y and check out the
10	  (arguably) beautiful poetry in
11	  <file:Documentation/networking/arcnet.txt>.
12
13	  You need both this driver, and the driver for the particular ARCnet
14	  chipset of your card. If you don't know, then it's probably a
15	  COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
16	  support" below.
17
18	  You might also want to have a look at the Ethernet-HOWTO, available
19	  from <http://www.tldp.org/docs.html#howto>(even though ARCnet
20	  is not really Ethernet).
21
22	  To compile this driver as a module, choose M here. The module will
23	  be called arcnet.
24
25if ARCNET
26
27config ARCNET_1201
28	tristate "Enable standard ARCNet packet format (RFC 1201)"
29	help
30	  This allows you to use RFC1201 with your ARCnet card via the virtual
31	  arc0 device.  You need to say Y here to communicate with
32	  industry-standard RFC1201 implementations, like the arcether.com
33	  packet driver or most DOS/Windows ODI drivers.  Please read the
34	  ARCnet documentation in <file:Documentation/networking/arcnet.txt>
35	  for more information about using arc0.
36
37config ARCNET_1051
38	tristate "Enable old ARCNet packet format (RFC 1051)"
39	---help---
40	  This allows you to use RFC1051 with your ARCnet card via the virtual
41	  arc0s device. You only need arc0s if you want to talk to ARCnet
42	  software complying with the "old" standard, specifically, the DOS
43	  arcnet.com packet driver, Amigas running AmiTCP, and some variants
44	  of NetBSD. You do not need to say Y here to communicate with
45	  industry-standard RFC1201 implementations, like the arcether.com
46	  packet driver or most DOS/Windows ODI drivers. RFC1201 is included
47	  automatically as the arc0 device. Please read the ARCnet
48	  documentation in <file:Documentation/networking/arcnet.txt> for more
49	  information about using arc0e and arc0s.
50
51config ARCNET_RAW
52	tristate "Enable raw mode packet interface"
53	help
54	  ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
55	  to work unless talking to a copy of the same Linux arcnet driver,
56	  but perhaps marginally faster in that case.
57
58config ARCNET_CAP
59	tristate "Enable CAP mode packet interface"
60	help
61	  ARCnet "cap mode" packet encapsulation. Used to get the hardware
62          acknowledge back to userspace. After the initial protocol byte every
63          packet is stuffed with an extra 4 byte "cookie" which doesn't
64          actually appear on the network. After transmit the driver will send
65          back a packet with protocol byte 0 containing the status of the
66          transmission:
67             0=no hardware acknowledge
68             1=excessive nak
69             2=transmission accepted by the receiver hardware
70
71          Received packets are also stuffed with the extra 4 bytes but it will
72          be random data.
73
74          Cap only listens to protocol 1-8.
75
76config ARCNET_COM90xx
77	tristate "ARCnet COM90xx (normal) chipset driver"
78	help
79	  This is the chipset driver for the standard COM90xx cards. If you
80	  have always used the old ARCnet driver without knowing what type of
81	  card you had, this is probably the one for you.
82
83	  To compile this driver as a module, choose M here. The module will
84	  be called com90xx.
85
86config ARCNET_COM90xxIO
87	tristate "ARCnet COM90xx (IO mapped) chipset driver"
88	---help---
89	  This is the chipset driver for the COM90xx cards, using them in
90	  IO-mapped mode instead of memory-mapped mode. This is slower than
91	  the normal driver. Only use it if your card doesn't support shared
92	  memory.
93
94	  To compile this driver as a module, choose M here. The module will
95	  be called com90io.
96
97config ARCNET_RIM_I
98	tristate "ARCnet COM90xx (RIM I) chipset driver"
99	---help---
100	  This is yet another chipset driver for the COM90xx cards, but this
101	  time only using memory-mapped mode, and no IO ports at all. This
102	  driver is completely untested, so if you have one of these cards,
103	  please mail <dwmw2@infradead.org>, especially if it works!
104
105	  To compile this driver as a module, choose M here. The module will
106	  be called arc-rimi.
107
108config ARCNET_COM20020
109	tristate "ARCnet COM20020 chipset driver"
110	help
111	  This is the driver for the new COM20020 chipset. It supports such
112	  things as promiscuous mode, so packet sniffing is possible, and
113	  extra diagnostic information.
114
115	  To compile this driver as a module, choose M here. The module will
116	  be called com20020.
117
118config ARCNET_COM20020_ISA
119	tristate "Support for COM20020 on ISA"
120	depends on ARCNET_COM20020 && ISA
121
122config ARCNET_COM20020_PCI
123	tristate "Support for COM20020 on PCI"
124	depends on ARCNET_COM20020 && PCI
125
126config ARCNET_COM20020_CS
127	tristate "COM20020 ARCnet PCMCIA support"
128	depends on ARCNET_COM20020 && PCMCIA
129	help
130	  Say Y here if you intend to attach this type of ARCnet PCMCIA card
131	  to your computer.
132
133	  To compile this driver as a module, choose M here: the module will be
134	  called com20020_cs.  If unsure, say N.
135
136endif # ARCNET
137