1#
2# PHY Layer Configuration
3#
4
5menuconfig PHYLIB
6	tristate "PHY Device support and infrastructure"
7	depends on !S390
8	depends on NETDEVICES
9	help
10	  Ethernet controllers are usually attached to PHY
11	  devices.  This option provides infrastructure for
12	  managing PHY devices.
13
14if PHYLIB
15
16comment "MII PHY device drivers"
17
18config AMD_PHY
19	tristate "Drivers for the AMD PHYs"
20	---help---
21	  Currently supports the am79c874
22
23config MARVELL_PHY
24	tristate "Drivers for Marvell PHYs"
25	---help---
26	  Currently has a driver for the 88E1011S
27	
28config DAVICOM_PHY
29	tristate "Drivers for Davicom PHYs"
30	---help---
31	  Currently supports dm9161e and dm9131
32
33config QSEMI_PHY
34	tristate "Drivers for Quality Semiconductor PHYs"
35	---help---
36	  Currently supports the qs6612
37
38config LXT_PHY
39	tristate "Drivers for the Intel LXT PHYs"
40	---help---
41	  Currently supports the lxt970, lxt971
42
43config CICADA_PHY
44	tristate "Drivers for the Cicada PHYs"
45	---help---
46	  Currently supports the cis8204
47
48config VITESSE_PHY
49        tristate "Drivers for the Vitesse PHYs"
50        ---help---
51          Currently supports the vsc8244
52
53config SMSC_PHY
54	tristate "Drivers for SMSC PHYs"
55	---help---
56	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
57
58config BROADCOM_PHY
59	tristate "Drivers for Broadcom PHYs"
60	---help---
61	  Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
62	  and BCM5482 PHYs.
63
64config BCM63XX_PHY
65	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
66	depends on BCM63XX
67	---help---
68	  Currently supports the 6348 and 6358 PHYs.
69
70config ICPLUS_PHY
71	tristate "Drivers for ICPlus PHYs"
72	---help---
73	  Currently supports the IP175C and IP1001 PHYs.
74
75config REALTEK_PHY
76	tristate "Drivers for Realtek PHYs"
77	---help---
78	  Supports the Realtek 821x PHY.
79
80config NATIONAL_PHY
81	tristate "Drivers for National Semiconductor PHYs"
82	---help---
83	  Currently supports the DP83865 PHY.
84
85config STE10XP
86	tristate "Driver for STMicroelectronics STe10Xp PHYs"
87	---help---
88	  This is the driver for the STe100p and STe101p PHYs.
89
90config LSI_ET1011C_PHY
91	tristate "Driver for LSI ET1011C PHY"
92	---help---
93	  Supports the LSI ET1011C PHY.
94
95config MICREL_PHY
96	tristate "Driver for Micrel PHYs"
97	---help---
98	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
99
100config FIXED_PHY
101	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
102	depends on PHYLIB=y
103	---help---
104	  Adds the platform "fixed" MDIO Bus to cover the boards that use
105	  PHYs that are not connected to the real MDIO bus.
106
107	  Currently tested with mpc866ads and mpc8349e-mitx.
108
109config MDIO_BITBANG
110	tristate "Support for bitbanged MDIO buses"
111	help
112	  This module implements the MDIO bus protocol in software,
113	  for use by low level drivers that export the ability to
114	  drive the relevant pins.
115
116	  If in doubt, say N.
117
118config MDIO_GPIO
119	tristate "Support for GPIO lib-based bitbanged MDIO buses"
120	depends on MDIO_BITBANG && GENERIC_GPIO
121	---help---
122	  Supports GPIO lib-based MDIO busses.
123
124	  To compile this driver as a module, choose M here: the module
125	  will be called mdio-gpio.
126
127config MDIO_OCTEON
128	tristate "Support for MDIO buses on Octeon SOCs"
129	depends on  CPU_CAVIUM_OCTEON
130	default y
131	help
132
133	  This module provides a driver for the Octeon MDIO busses.
134	  It is required by the Octeon Ethernet device drivers.
135
136	  If in doubt, say Y.
137
138endif # PHYLIB
139
140config MICREL_KS8995MA
141	tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
142	depends on SPI
143