1/* envctrl.c: Temperature and Fan monitoring on Machines providing it. 2 * 3 * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) 4 * Copyright (C) 2000 Vinh Truong (vinh.truong@eng.sun.com) 5 * VT - The implementation is to support Sun Microelectronics (SME) platform 6 * environment monitoring. SME platforms use pcf8584 as the i2c bus 7 * controller to access pcf8591 (8-bit A/D and D/A converter) and 8 * pcf8571 (256 x 8-bit static low-voltage RAM with I2C-bus interface). 9 * At board level, it follows SME Firmware I2C Specification. Reference: 10 * http://www-eu2.semiconductors.com/pip/PCF8584P 11 * http://www-eu2.semiconductors.com/pip/PCF8574AP 12 * http://www-eu2.semiconductors.com/pip/PCF8591P 13 * 14 * EB - Added support for CP1500 Global Address and PS/Voltage monitoring. 15 * Eric Brower <ebrower@usa.net> 16 * 17 * DB - Audit every copy_to_user in envctrl_read. 18 * Daniele Bellucci <bellucda@tiscali.it> 19 */ 20 21#include <linux/module.h> 22#include <linux/init.h> 23#include <linux/kthread.h> 24#include <linux/delay.h> 25#include <linux/ioport.h> 26#include <linux/miscdevice.h> 27#include <linux/kmod.h> 28#include <linux/reboot.h> 29#include <linux/slab.h> 30#include <linux/of.h> 31#include <linux/of_device.h> 32 33#include <asm/uaccess.h> 34#include <asm/envctrl.h> 35#include <asm/io.h> 36 37#define DRIVER_NAME "envctrl" 38#define PFX DRIVER_NAME ": " 39 40#define ENVCTRL_MINOR 162 41 42#define PCF8584_ADDRESS 0x55 43 44#define CONTROL_PIN 0x80 45#define CONTROL_ES0 0x40 46#define CONTROL_ES1 0x20 47#define CONTROL_ES2 0x10 48#define CONTROL_ENI 0x08 49#define CONTROL_STA 0x04 50#define CONTROL_STO 0x02 51#define CONTROL_ACK 0x01 52 53#define STATUS_PIN 0x80 54#define STATUS_STS 0x20 55#define STATUS_BER 0x10 56#define STATUS_LRB 0x08 57#define STATUS_AD0 0x08 58#define STATUS_AAB 0x04 59#define STATUS_LAB 0x02 60#define STATUS_BB 0x01 61 62/* 63 * CLK Mode Register. 64 */ 65#define BUS_CLK_90 0x00 66#define BUS_CLK_45 0x01 67#define BUS_CLK_11 0x02 68#define BUS_CLK_1_5 0x03 69 70#define CLK_3 0x00 71#define CLK_4_43 0x10 72#define CLK_6 0x14 73#define CLK_8 0x18 74#define CLK_12 0x1c 75 76#define OBD_SEND_START 0xc5 /* value to generate I2c_bus START condition */ 77#define OBD_SEND_STOP 0xc3 /* value to generate I2c_bus STOP condition */ 78 79/* Monitor type of i2c child device. 80 * Firmware definitions. 81 */ 82#define PCF8584_MAX_CHANNELS 8 83#define PCF8584_GLOBALADDR_TYPE 6 /* global address monitor */ 84#define PCF8584_FANSTAT_TYPE 3 /* fan status monitor */ 85#define PCF8584_VOLTAGE_TYPE 2 /* voltage monitor */ 86#define PCF8584_TEMP_TYPE 1 /* temperature monitor*/ 87 88/* Monitor type of i2c child device. 89 * Driver definitions. 90 */ 91#define ENVCTRL_NOMON 0 92#define ENVCTRL_CPUTEMP_MON 1 /* cpu temperature monitor */ 93#define ENVCTRL_CPUVOLTAGE_MON 2 /* voltage monitor */ 94#define ENVCTRL_FANSTAT_MON 3 /* fan status monitor */ 95#define ENVCTRL_ETHERTEMP_MON 4 /* ethernet temperature */ 96 /* monitor */ 97#define ENVCTRL_VOLTAGESTAT_MON 5 /* voltage status monitor */ 98#define ENVCTRL_MTHRBDTEMP_MON 6 /* motherboard temperature */ 99#define ENVCTRL_SCSITEMP_MON 7 /* scsi temperature */ 100#define ENVCTRL_GLOBALADDR_MON 8 /* global address */ 101 102/* Child device type. 103 * Driver definitions. 104 */ 105#define I2C_ADC 0 /* pcf8591 */ 106#define I2C_GPIO 1 /* pcf8571 */ 107 108/* Data read from child device may need to decode 109 * through a data table and a scale. 110 * Translation type as defined by firmware. 111 */ 112#define ENVCTRL_TRANSLATE_NO 0 113#define ENVCTRL_TRANSLATE_PARTIAL 1 114#define ENVCTRL_TRANSLATE_COMBINED 2 115#define ENVCTRL_TRANSLATE_FULL 3 /* table[data] */ 116#define ENVCTRL_TRANSLATE_SCALE 4 /* table[data]/scale */ 117 118/* Driver miscellaneous definitions. */ 119#define ENVCTRL_MAX_CPU 4 120#define CHANNEL_DESC_SZ 256 121 122/* Mask values for combined GlobalAddress/PowerStatus node */ 123#define ENVCTRL_GLOBALADDR_ADDR_MASK 0x1F 124#define ENVCTRL_GLOBALADDR_PSTAT_MASK 0x60 125 126/* Node 0x70 ignored on CompactPCI CP1400/1500 platforms 127 * (see envctrl_init_i2c_child) 128 */ 129#define ENVCTRL_CPCI_IGNORED_NODE 0x70 130 131#define PCF8584_DATA 0x00 132#define PCF8584_CSR 0x01 133 134/* Each child device can be monitored by up to PCF8584_MAX_CHANNELS. 135 * Property of a port or channel as defined by the firmware. 136 */ 137struct pcf8584_channel { 138 unsigned char chnl_no; 139 unsigned char io_direction; 140 unsigned char type; 141 unsigned char last; 142}; 143 144/* Each child device may have one or more tables of bytes to help decode 145 * data. Table property as defined by the firmware. 146 */ 147struct pcf8584_tblprop { 148 unsigned int type; 149 unsigned int scale; 150 unsigned int offset; /* offset from the beginning of the table */ 151 unsigned int size; 152}; 153 154/* i2c child */ 155struct i2c_child_t { 156 /* Either ADC or GPIO. */ 157 unsigned char i2ctype; 158 unsigned long addr; 159 struct pcf8584_channel chnl_array[PCF8584_MAX_CHANNELS]; 160 161 /* Channel info. */ 162 unsigned int total_chnls; /* Number of monitor channels. */ 163 unsigned char fan_mask; /* Byte mask for fan status channels. */ 164 unsigned char voltage_mask; /* Byte mask for voltage status channels. */ 165 struct pcf8584_tblprop tblprop_array[PCF8584_MAX_CHANNELS]; 166 167 /* Properties of all monitor channels. */ 168 unsigned int total_tbls; /* Number of monitor tables. */ 169 char *tables; /* Pointer to table(s). */ 170 char chnls_desc[CHANNEL_DESC_SZ]; /* Channel description. */ 171 char mon_type[PCF8584_MAX_CHANNELS]; 172}; 173 174static void __iomem *i2c; 175static struct i2c_child_t i2c_childlist[ENVCTRL_MAX_CPU*2]; 176static unsigned char chnls_mask[] = { 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80 }; 177static unsigned int warning_temperature = 0; 178static unsigned int shutdown_temperature = 0; 179static char read_cpu; 180 181/* Forward declarations. */ 182static struct i2c_child_t *envctrl_get_i2c_child(unsigned char); 183 184/* Function Description: Test the PIN bit (Pending Interrupt Not) 185 * to test when serial transmission is completed . 186 * Return : None. 187 */ 188static void envtrl_i2c_test_pin(void) 189{ 190 int limit = 1000000; 191 192 while (--limit > 0) { 193 if (!(readb(i2c + PCF8584_CSR) & STATUS_PIN)) 194 break; 195 udelay(1); 196 } 197 198 if (limit <= 0) 199 printk(KERN_INFO PFX "Pin status will not clear.\n"); 200} 201 202/* Function Description: Test busy bit. 203 * Return : None. 204 */ 205static void envctrl_i2c_test_bb(void) 206{ 207 int limit = 1000000; 208 209 while (--limit > 0) { 210 /* Busy bit 0 means busy. */ 211 if (readb(i2c + PCF8584_CSR) & STATUS_BB) 212 break; 213 udelay(1); 214 } 215 216 if (limit <= 0) 217 printk(KERN_INFO PFX "Busy bit will not clear.\n"); 218} 219 220/* Function Description: Send the address for a read access. 221 * Return : 0 if not acknowledged, otherwise acknowledged. 222 */ 223static int envctrl_i2c_read_addr(unsigned char addr) 224{ 225 envctrl_i2c_test_bb(); 226 227 /* Load address. */ 228 writeb(addr + 1, i2c + PCF8584_DATA); 229 230 envctrl_i2c_test_bb(); 231 232 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 233 234 /* Wait for PIN. */ 235 envtrl_i2c_test_pin(); 236 237 /* CSR 0 means acknowledged. */ 238 if (!(readb(i2c + PCF8584_CSR) & STATUS_LRB)) { 239 return readb(i2c + PCF8584_DATA); 240 } else { 241 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 242 return 0; 243 } 244} 245 246/* Function Description: Send the address for write mode. 247 * Return : None. 248 */ 249static void envctrl_i2c_write_addr(unsigned char addr) 250{ 251 envctrl_i2c_test_bb(); 252 writeb(addr, i2c + PCF8584_DATA); 253 254 /* Generate Start condition. */ 255 writeb(OBD_SEND_START, i2c + PCF8584_CSR); 256} 257 258/* Function Description: Read 1 byte of data from addr 259 * set by envctrl_i2c_read_addr() 260 * Return : Data from address set by envctrl_i2c_read_addr(). 261 */ 262static unsigned char envctrl_i2c_read_data(void) 263{ 264 envtrl_i2c_test_pin(); 265 writeb(CONTROL_ES0, i2c + PCF8584_CSR); /* Send neg ack. */ 266 return readb(i2c + PCF8584_DATA); 267} 268 269/* Function Description: Instruct the device which port to read data from. 270 * Return : None. 271 */ 272static void envctrl_i2c_write_data(unsigned char port) 273{ 274 envtrl_i2c_test_pin(); 275 writeb(port, i2c + PCF8584_DATA); 276} 277 278/* Function Description: Generate Stop condition after last byte is sent. 279 * Return : None. 280 */ 281static void envctrl_i2c_stop(void) 282{ 283 envtrl_i2c_test_pin(); 284 writeb(OBD_SEND_STOP, i2c + PCF8584_CSR); 285} 286 287/* Function Description: Read adc device. 288 * Return : Data at address and port. 289 */ 290static unsigned char envctrl_i2c_read_8591(unsigned char addr, unsigned char port) 291{ 292 /* Send address. */ 293 envctrl_i2c_write_addr(addr); 294 295 /* Setup port to read. */ 296 envctrl_i2c_write_data(port); 297 envctrl_i2c_stop(); 298 299 /* Read port. */ 300 envctrl_i2c_read_addr(addr); 301 302 /* Do a single byte read and send stop. */ 303 envctrl_i2c_read_data(); 304 envctrl_i2c_stop(); 305 306 return readb(i2c + PCF8584_DATA); 307} 308 309/* Function Description: Read gpio device. 310 * Return : Data at address. 311 */ 312static unsigned char envctrl_i2c_read_8574(unsigned char addr) 313{ 314 unsigned char rd; 315 316 envctrl_i2c_read_addr(addr); 317 318 /* Do a single byte read and send stop. */ 319 rd = envctrl_i2c_read_data(); 320 envctrl_i2c_stop(); 321 return rd; 322} 323 324/* Function Description: Decode data read from an adc device using firmware 325 * table. 326 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 327 */ 328static int envctrl_i2c_data_translate(unsigned char data, int translate_type, 329 int scale, char *tbl, char *bufdata) 330{ 331 int len = 0; 332 333 switch (translate_type) { 334 case ENVCTRL_TRANSLATE_NO: 335 /* No decode necessary. */ 336 len = 1; 337 bufdata[0] = data; 338 break; 339 340 case ENVCTRL_TRANSLATE_FULL: 341 /* Decode this way: data = table[data]. */ 342 len = 1; 343 bufdata[0] = tbl[data]; 344 break; 345 346 case ENVCTRL_TRANSLATE_SCALE: 347 /* Decode this way: data = table[data]/scale */ 348 sprintf(bufdata,"%d ", (tbl[data] * 10) / (scale)); 349 len = strlen(bufdata); 350 bufdata[len - 1] = bufdata[len - 2]; 351 bufdata[len - 2] = '.'; 352 break; 353 354 default: 355 break; 356 }; 357 358 return len; 359} 360 361/* Function Description: Read cpu-related data such as cpu temperature, voltage. 362 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 363 */ 364static int envctrl_read_cpu_info(int cpu, struct i2c_child_t *pchild, 365 char mon_type, unsigned char *bufdata) 366{ 367 unsigned char data; 368 int i; 369 char *tbl, j = -1; 370 371 /* Find the right monitor type and channel. */ 372 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 373 if (pchild->mon_type[i] == mon_type) { 374 if (++j == cpu) { 375 break; 376 } 377 } 378 } 379 380 if (j != cpu) 381 return 0; 382 383 /* Read data from address and port. */ 384 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 385 (unsigned char)pchild->chnl_array[i].chnl_no); 386 387 /* Find decoding table. */ 388 tbl = pchild->tables + pchild->tblprop_array[i].offset; 389 390 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 391 pchild->tblprop_array[i].scale, 392 tbl, bufdata); 393} 394 395/* Function Description: Read noncpu-related data such as motherboard 396 * temperature. 397 * Return: Number of read bytes. Data is stored in bufdata in ascii format. 398 */ 399static int envctrl_read_noncpu_info(struct i2c_child_t *pchild, 400 char mon_type, unsigned char *bufdata) 401{ 402 unsigned char data; 403 int i; 404 char *tbl = NULL; 405 406 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 407 if (pchild->mon_type[i] == mon_type) 408 break; 409 } 410 411 if (i >= PCF8584_MAX_CHANNELS) 412 return 0; 413 414 /* Read data from address and port. */ 415 data = envctrl_i2c_read_8591((unsigned char)pchild->addr, 416 (unsigned char)pchild->chnl_array[i].chnl_no); 417 418 /* Find decoding table. */ 419 tbl = pchild->tables + pchild->tblprop_array[i].offset; 420 421 return envctrl_i2c_data_translate(data, pchild->tblprop_array[i].type, 422 pchild->tblprop_array[i].scale, 423 tbl, bufdata); 424} 425 426/* Function Description: Read fan status. 427 * Return : Always 1 byte. Status stored in bufdata. 428 */ 429static int envctrl_i2c_fan_status(struct i2c_child_t *pchild, 430 unsigned char data, 431 char *bufdata) 432{ 433 unsigned char tmp, ret = 0; 434 int i, j = 0; 435 436 tmp = data & pchild->fan_mask; 437 438 if (tmp == pchild->fan_mask) { 439 /* All bits are on. All fans are functioning. */ 440 ret = ENVCTRL_ALL_FANS_GOOD; 441 } else if (tmp == 0) { 442 /* No bits are on. No fans are functioning. */ 443 ret = ENVCTRL_ALL_FANS_BAD; 444 } else { 445 /* Go through all channels, mark 'on' the matched bits. 446 * Notice that fan_mask may have discontiguous bits but 447 * return mask are always contiguous. For example if we 448 * monitor 4 fans at channels 0,1,2,4, the return mask 449 * should be 00010000 if only fan at channel 4 is working. 450 */ 451 for (i = 0; i < PCF8584_MAX_CHANNELS;i++) { 452 if (pchild->fan_mask & chnls_mask[i]) { 453 if (!(chnls_mask[i] & tmp)) 454 ret |= chnls_mask[j]; 455 456 j++; 457 } 458 } 459 } 460 461 bufdata[0] = ret; 462 return 1; 463} 464 465/* Function Description: Read global addressing line. 466 * Return : Always 1 byte. Status stored in bufdata. 467 */ 468static int envctrl_i2c_globaladdr(struct i2c_child_t *pchild, 469 unsigned char data, 470 char *bufdata) 471{ 472 /* Translatation table is not necessary, as global 473 * addr is the integer value of the GA# bits. 474 * 475 * NOTE: MSB is documented as zero, but I see it as '1' always.... 476 * 477 * ----------------------------------------------- 478 * | 0 | FAL | DEG | GA4 | GA3 | GA2 | GA1 | GA0 | 479 * ----------------------------------------------- 480 * GA0 - GA4 integer value of Global Address (backplane slot#) 481 * DEG 0 = cPCI Power supply output is starting to degrade 482 * 1 = cPCI Power supply output is OK 483 * FAL 0 = cPCI Power supply has failed 484 * 1 = cPCI Power supply output is OK 485 */ 486 bufdata[0] = (data & ENVCTRL_GLOBALADDR_ADDR_MASK); 487 return 1; 488} 489 490/* Function Description: Read standard voltage and power supply status. 491 * Return : Always 1 byte. Status stored in bufdata. 492 */ 493static unsigned char envctrl_i2c_voltage_status(struct i2c_child_t *pchild, 494 unsigned char data, 495 char *bufdata) 496{ 497 unsigned char tmp, ret = 0; 498 int i, j = 0; 499 500 tmp = data & pchild->voltage_mask; 501 502 /* Two channels are used to monitor voltage and power supply. */ 503 if (tmp == pchild->voltage_mask) { 504 /* All bits are on. Voltage and power supply are okay. */ 505 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD; 506 } else if (tmp == 0) { 507 /* All bits are off. Voltage and power supply are bad */ 508 ret = ENVCTRL_VOLTAGE_POWERSUPPLY_BAD; 509 } else { 510 /* Either voltage or power supply has problem. */ 511 for (i = 0; i < PCF8584_MAX_CHANNELS; i++) { 512 if (pchild->voltage_mask & chnls_mask[i]) { 513 j++; 514 515 /* Break out when there is a mismatch. */ 516 if (!(chnls_mask[i] & tmp)) 517 break; 518 } 519 } 520 521 /* Make a wish that hardware will always use the 522 * first channel for voltage and the second for 523 * power supply. 524 */ 525 if (j == 1) 526 ret = ENVCTRL_VOLTAGE_BAD; 527 else 528 ret = ENVCTRL_POWERSUPPLY_BAD; 529 } 530 531 bufdata[0] = ret; 532 return 1; 533} 534 535/* Function Description: Read a byte from /dev/envctrl. Mapped to user read(). 536 * Return: Number of read bytes. 0 for error. 537 */ 538static ssize_t 539envctrl_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) 540{ 541 struct i2c_child_t *pchild; 542 unsigned char data[10]; 543 int ret = 0; 544 545 /* Get the type of read as decided in ioctl() call. 546 * Find the appropriate i2c child. 547 * Get the data and put back to the user buffer. 548 */ 549 550 switch ((int)(long)file->private_data) { 551 case ENVCTRL_RD_WARNING_TEMPERATURE: 552 if (warning_temperature == 0) 553 return 0; 554 555 data[0] = (unsigned char)(warning_temperature); 556 ret = 1; 557 if (copy_to_user(buf, data, ret)) 558 ret = -EFAULT; 559 break; 560 561 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 562 if (shutdown_temperature == 0) 563 return 0; 564 565 data[0] = (unsigned char)(shutdown_temperature); 566 ret = 1; 567 if (copy_to_user(buf, data, ret)) 568 ret = -EFAULT; 569 break; 570 571 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 572 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_MTHRBDTEMP_MON))) 573 return 0; 574 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_MTHRBDTEMP_MON, data); 575 if (copy_to_user(buf, data, ret)) 576 ret = -EFAULT; 577 break; 578 579 case ENVCTRL_RD_CPU_TEMPERATURE: 580 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) 581 return 0; 582 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUTEMP_MON, data); 583 584 /* Reset cpu to the default cpu0. */ 585 if (copy_to_user(buf, data, ret)) 586 ret = -EFAULT; 587 break; 588 589 case ENVCTRL_RD_CPU_VOLTAGE: 590 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_CPUVOLTAGE_MON))) 591 return 0; 592 ret = envctrl_read_cpu_info(read_cpu, pchild, ENVCTRL_CPUVOLTAGE_MON, data); 593 594 /* Reset cpu to the default cpu0. */ 595 if (copy_to_user(buf, data, ret)) 596 ret = -EFAULT; 597 break; 598 599 case ENVCTRL_RD_SCSI_TEMPERATURE: 600 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_SCSITEMP_MON))) 601 return 0; 602 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_SCSITEMP_MON, data); 603 if (copy_to_user(buf, data, ret)) 604 ret = -EFAULT; 605 break; 606 607 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 608 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_ETHERTEMP_MON))) 609 return 0; 610 ret = envctrl_read_noncpu_info(pchild, ENVCTRL_ETHERTEMP_MON, data); 611 if (copy_to_user(buf, data, ret)) 612 ret = -EFAULT; 613 break; 614 615 case ENVCTRL_RD_FAN_STATUS: 616 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_FANSTAT_MON))) 617 return 0; 618 data[0] = envctrl_i2c_read_8574(pchild->addr); 619 ret = envctrl_i2c_fan_status(pchild,data[0], data); 620 if (copy_to_user(buf, data, ret)) 621 ret = -EFAULT; 622 break; 623 624 case ENVCTRL_RD_GLOBALADDRESS: 625 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 626 return 0; 627 data[0] = envctrl_i2c_read_8574(pchild->addr); 628 ret = envctrl_i2c_globaladdr(pchild, data[0], data); 629 if (copy_to_user(buf, data, ret)) 630 ret = -EFAULT; 631 break; 632 633 case ENVCTRL_RD_VOLTAGE_STATUS: 634 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_VOLTAGESTAT_MON))) 635 /* If voltage monitor not present, check for CPCI equivalent */ 636 if (!(pchild = envctrl_get_i2c_child(ENVCTRL_GLOBALADDR_MON))) 637 return 0; 638 data[0] = envctrl_i2c_read_8574(pchild->addr); 639 ret = envctrl_i2c_voltage_status(pchild, data[0], data); 640 if (copy_to_user(buf, data, ret)) 641 ret = -EFAULT; 642 break; 643 644 default: 645 break; 646 647 }; 648 649 return ret; 650} 651 652/* Function Description: Command what to read. Mapped to user ioctl(). 653 * Return: Gives 0 for implemented commands, -EINVAL otherwise. 654 */ 655static long 656envctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg) 657{ 658 char __user *infobuf; 659 660 switch (cmd) { 661 case ENVCTRL_RD_WARNING_TEMPERATURE: 662 case ENVCTRL_RD_SHUTDOWN_TEMPERATURE: 663 case ENVCTRL_RD_MTHRBD_TEMPERATURE: 664 case ENVCTRL_RD_FAN_STATUS: 665 case ENVCTRL_RD_VOLTAGE_STATUS: 666 case ENVCTRL_RD_ETHERNET_TEMPERATURE: 667 case ENVCTRL_RD_SCSI_TEMPERATURE: 668 case ENVCTRL_RD_GLOBALADDRESS: 669 file->private_data = (void *)(long)cmd; 670 break; 671 672 case ENVCTRL_RD_CPU_TEMPERATURE: 673 case ENVCTRL_RD_CPU_VOLTAGE: 674 /* Check to see if application passes in any cpu number, 675 * the default is cpu0. 676 */ 677 infobuf = (char __user *) arg; 678 if (infobuf == NULL) { 679 read_cpu = 0; 680 }else { 681 get_user(read_cpu, infobuf); 682 } 683 684 /* Save the command for use when reading. */ 685 file->private_data = (void *)(long)cmd; 686 break; 687 688 default: 689 return -EINVAL; 690 }; 691 692 return 0; 693} 694 695/* Function Description: open device. Mapped to user open(). 696 * Return: Always 0. 697 */ 698static int 699envctrl_open(struct inode *inode, struct file *file) 700{ 701 file->private_data = NULL; 702 return 0; 703} 704 705/* Function Description: Open device. Mapped to user close(). 706 * Return: Always 0. 707 */ 708static int 709envctrl_release(struct inode *inode, struct file *file) 710{ 711 return 0; 712} 713 714static const struct file_operations envctrl_fops = { 715 .owner = THIS_MODULE, 716 .read = envctrl_read, 717 .unlocked_ioctl = envctrl_ioctl, 718#ifdef CONFIG_COMPAT 719 .compat_ioctl = envctrl_ioctl, 720#endif 721 .open = envctrl_open, 722 .release = envctrl_release, 723 .llseek = noop_llseek, 724}; 725 726static struct miscdevice envctrl_dev = { 727 ENVCTRL_MINOR, 728 "envctrl", 729 &envctrl_fops 730}; 731 732/* Function Description: Set monitor type based on firmware description. 733 * Return: None. 734 */ 735static void envctrl_set_mon(struct i2c_child_t *pchild, 736 const char *chnl_desc, 737 int chnl_no) 738{ 739 /* Firmware only has temperature type. It does not distinguish 740 * different kinds of temperatures. We use channel description 741 * to disinguish them. 742 */ 743 if (!(strcmp(chnl_desc,"temp,cpu")) || 744 !(strcmp(chnl_desc,"temp,cpu0")) || 745 !(strcmp(chnl_desc,"temp,cpu1")) || 746 !(strcmp(chnl_desc,"temp,cpu2")) || 747 !(strcmp(chnl_desc,"temp,cpu3"))) 748 pchild->mon_type[chnl_no] = ENVCTRL_CPUTEMP_MON; 749 750 if (!(strcmp(chnl_desc,"vddcore,cpu0")) || 751 !(strcmp(chnl_desc,"vddcore,cpu1")) || 752 !(strcmp(chnl_desc,"vddcore,cpu2")) || 753 !(strcmp(chnl_desc,"vddcore,cpu3"))) 754 pchild->mon_type[chnl_no] = ENVCTRL_CPUVOLTAGE_MON; 755 756 if (!(strcmp(chnl_desc,"temp,motherboard"))) 757 pchild->mon_type[chnl_no] = ENVCTRL_MTHRBDTEMP_MON; 758 759 if (!(strcmp(chnl_desc,"temp,scsi"))) 760 pchild->mon_type[chnl_no] = ENVCTRL_SCSITEMP_MON; 761 762 if (!(strcmp(chnl_desc,"temp,ethernet"))) 763 pchild->mon_type[chnl_no] = ENVCTRL_ETHERTEMP_MON; 764} 765 766/* Function Description: Initialize monitor channel with channel desc, 767 * decoding tables, monitor type, optional properties. 768 * Return: None. 769 */ 770static void envctrl_init_adc(struct i2c_child_t *pchild, struct device_node *dp) 771{ 772 int i = 0, len; 773 const char *pos; 774 const unsigned int *pval; 775 776 /* Firmware describe channels into a stream separated by a '\0'. */ 777 pos = of_get_property(dp, "channels-description", &len); 778 779 while (len > 0) { 780 int l = strlen(pos) + 1; 781 envctrl_set_mon(pchild, pos, i++); 782 len -= l; 783 pos += l; 784 } 785 786 /* Get optional properties. */ 787 pval = of_get_property(dp, "warning-temp", NULL); 788 if (pval) 789 warning_temperature = *pval; 790 791 pval = of_get_property(dp, "shutdown-temp", NULL); 792 if (pval) 793 shutdown_temperature = *pval; 794} 795 796/* Function Description: Initialize child device monitoring fan status. 797 * Return: None. 798 */ 799static void envctrl_init_fanstat(struct i2c_child_t *pchild) 800{ 801 int i; 802 803 /* Go through all channels and set up the mask. */ 804 for (i = 0; i < pchild->total_chnls; i++) 805 pchild->fan_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 806 807 /* We only need to know if this child has fan status monitored. 808 * We don't care which channels since we have the mask already. 809 */ 810 pchild->mon_type[0] = ENVCTRL_FANSTAT_MON; 811} 812 813/* Function Description: Initialize child device for global addressing line. 814 * Return: None. 815 */ 816static void envctrl_init_globaladdr(struct i2c_child_t *pchild) 817{ 818 int i; 819 820 /* Voltage/PowerSupply monitoring is piggybacked 821 * with Global Address on CompactPCI. See comments 822 * within envctrl_i2c_globaladdr for bit assignments. 823 * 824 * The mask is created here by assigning mask bits to each 825 * bit position that represents PCF8584_VOLTAGE_TYPE data. 826 * Channel numbers are not consecutive within the globaladdr 827 * node (why?), so we use the actual counter value as chnls_mask 828 * index instead of the chnl_array[x].chnl_no value. 829 * 830 * NOTE: This loop could be replaced with a constant representing 831 * a mask of bits 5&6 (ENVCTRL_GLOBALADDR_PSTAT_MASK). 832 */ 833 for (i = 0; i < pchild->total_chnls; i++) { 834 if (PCF8584_VOLTAGE_TYPE == pchild->chnl_array[i].type) { 835 pchild->voltage_mask |= chnls_mask[i]; 836 } 837 } 838 839 /* We only need to know if this child has global addressing 840 * line monitored. We don't care which channels since we know 841 * the mask already (ENVCTRL_GLOBALADDR_ADDR_MASK). 842 */ 843 pchild->mon_type[0] = ENVCTRL_GLOBALADDR_MON; 844} 845 846/* Initialize child device monitoring voltage status. */ 847static void envctrl_init_voltage_status(struct i2c_child_t *pchild) 848{ 849 int i; 850 851 /* Go through all channels and set up the mask. */ 852 for (i = 0; i < pchild->total_chnls; i++) 853 pchild->voltage_mask |= chnls_mask[(pchild->chnl_array[i]).chnl_no]; 854 855 /* We only need to know if this child has voltage status monitored. 856 * We don't care which channels since we have the mask already. 857 */ 858 pchild->mon_type[0] = ENVCTRL_VOLTAGESTAT_MON; 859} 860 861/* Function Description: Initialize i2c child device. 862 * Return: None. 863 */ 864static void envctrl_init_i2c_child(struct device_node *dp, 865 struct i2c_child_t *pchild) 866{ 867 int len, i, tbls_size = 0; 868 const void *pval; 869 870 /* Get device address. */ 871 pval = of_get_property(dp, "reg", &len); 872 memcpy(&pchild->addr, pval, len); 873 874 /* Get tables property. Read firmware temperature tables. */ 875 pval = of_get_property(dp, "translation", &len); 876 if (pval && len > 0) { 877 memcpy(pchild->tblprop_array, pval, len); 878 pchild->total_tbls = len / sizeof(struct pcf8584_tblprop); 879 for (i = 0; i < pchild->total_tbls; i++) { 880 if ((pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset) > tbls_size) { 881 tbls_size = pchild->tblprop_array[i].size + pchild->tblprop_array[i].offset; 882 } 883 } 884 885 pchild->tables = kmalloc(tbls_size, GFP_KERNEL); 886 if (pchild->tables == NULL){ 887 printk(KERN_ERR PFX "Failed to allocate table.\n"); 888 return; 889 } 890 pval = of_get_property(dp, "tables", &len); 891 if (!pval || len <= 0) { 892 printk(KERN_ERR PFX "Failed to get table.\n"); 893 return; 894 } 895 memcpy(pchild->tables, pval, len); 896 } 897 898 /* SPARCengine ASM Reference Manual (ref. SMI doc 805-7581-04) 899 * sections 2.5, 3.5, 4.5 state node 0x70 for CP1400/1500 is 900 * "For Factory Use Only." 901 * 902 * We ignore the node on these platforms by assigning the 903 * 'NULL' monitor type. 904 */ 905 if (ENVCTRL_CPCI_IGNORED_NODE == pchild->addr) { 906 struct device_node *root_node; 907 int len; 908 909 root_node = of_find_node_by_path("/"); 910 if (!strcmp(root_node->name, "SUNW,UltraSPARC-IIi-cEngine")) { 911 for (len = 0; len < PCF8584_MAX_CHANNELS; ++len) { 912 pchild->mon_type[len] = ENVCTRL_NOMON; 913 } 914 return; 915 } 916 } 917 918 /* Get the monitor channels. */ 919 pval = of_get_property(dp, "channels-in-use", &len); 920 memcpy(pchild->chnl_array, pval, len); 921 pchild->total_chnls = len / sizeof(struct pcf8584_channel); 922 923 for (i = 0; i < pchild->total_chnls; i++) { 924 switch (pchild->chnl_array[i].type) { 925 case PCF8584_TEMP_TYPE: 926 envctrl_init_adc(pchild, dp); 927 break; 928 929 case PCF8584_GLOBALADDR_TYPE: 930 envctrl_init_globaladdr(pchild); 931 i = pchild->total_chnls; 932 break; 933 934 case PCF8584_FANSTAT_TYPE: 935 envctrl_init_fanstat(pchild); 936 i = pchild->total_chnls; 937 break; 938 939 case PCF8584_VOLTAGE_TYPE: 940 if (pchild->i2ctype == I2C_ADC) { 941 envctrl_init_adc(pchild,dp); 942 } else { 943 envctrl_init_voltage_status(pchild); 944 } 945 i = pchild->total_chnls; 946 break; 947 948 default: 949 break; 950 }; 951 } 952} 953 954/* Function Description: Search the child device list for a device. 955 * Return : The i2c child if found. NULL otherwise. 956 */ 957static struct i2c_child_t *envctrl_get_i2c_child(unsigned char mon_type) 958{ 959 int i, j; 960 961 for (i = 0; i < ENVCTRL_MAX_CPU*2; i++) { 962 for (j = 0; j < PCF8584_MAX_CHANNELS; j++) { 963 if (i2c_childlist[i].mon_type[j] == mon_type) { 964 return (struct i2c_child_t *)(&(i2c_childlist[i])); 965 } 966 } 967 } 968 return NULL; 969} 970 971static void envctrl_do_shutdown(void) 972{ 973 static int inprog = 0; 974 int ret; 975 976 if (inprog != 0) 977 return; 978 979 inprog = 1; 980 printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n"); 981 ret = orderly_poweroff(true); 982 if (ret < 0) { 983 printk(KERN_CRIT "kenvctrld: WARNING: system shutdown failed!\n"); 984 inprog = 0; /* unlikely to succeed, but we could try again */ 985 } 986} 987 988static struct task_struct *kenvctrld_task; 989 990static int kenvctrld(void *__unused) 991{ 992 int poll_interval; 993 int whichcpu; 994 char tempbuf[10]; 995 struct i2c_child_t *cputemp; 996 997 if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) { 998 printk(KERN_ERR PFX 999 "kenvctrld unable to monitor CPU temp-- exiting\n"); 1000 return -ENODEV; 1001 } 1002 1003 poll_interval = 5000; /* TODO env_mon_interval */ 1004 1005 printk(KERN_INFO PFX "%s starting...\n", current->comm); 1006 for (;;) { 1007 msleep_interruptible(poll_interval); 1008 1009 if (kthread_should_stop()) 1010 break; 1011 1012 for (whichcpu = 0; whichcpu < ENVCTRL_MAX_CPU; ++whichcpu) { 1013 if (0 < envctrl_read_cpu_info(whichcpu, cputemp, 1014 ENVCTRL_CPUTEMP_MON, 1015 tempbuf)) { 1016 if (tempbuf[0] >= shutdown_temperature) { 1017 printk(KERN_CRIT 1018 "%s: WARNING: CPU%i temperature %i C meets or exceeds "\ 1019 "shutdown threshold %i C\n", 1020 current->comm, whichcpu, 1021 tempbuf[0], shutdown_temperature); 1022 envctrl_do_shutdown(); 1023 } 1024 } 1025 } 1026 } 1027 printk(KERN_INFO PFX "%s exiting...\n", current->comm); 1028 return 0; 1029} 1030 1031static int __devinit envctrl_probe(struct platform_device *op) 1032{ 1033 struct device_node *dp; 1034 int index, err; 1035 1036 if (i2c) 1037 return -EINVAL; 1038 1039 i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME); 1040 if (!i2c) 1041 return -ENOMEM; 1042 1043 index = 0; 1044 dp = op->dev.of_node->child; 1045 while (dp) { 1046 if (!strcmp(dp->name, "gpio")) { 1047 i2c_childlist[index].i2ctype = I2C_GPIO; 1048 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1049 } else if (!strcmp(dp->name, "adc")) { 1050 i2c_childlist[index].i2ctype = I2C_ADC; 1051 envctrl_init_i2c_child(dp, &(i2c_childlist[index++])); 1052 } 1053 1054 dp = dp->sibling; 1055 } 1056 1057 /* Set device address. */ 1058 writeb(CONTROL_PIN, i2c + PCF8584_CSR); 1059 writeb(PCF8584_ADDRESS, i2c + PCF8584_DATA); 1060 1061 /* Set system clock and SCL frequencies. */ 1062 writeb(CONTROL_PIN | CONTROL_ES1, i2c + PCF8584_CSR); 1063 writeb(CLK_4_43 | BUS_CLK_90, i2c + PCF8584_DATA); 1064 1065 /* Enable serial interface. */ 1066 writeb(CONTROL_PIN | CONTROL_ES0 | CONTROL_ACK, i2c + PCF8584_CSR); 1067 udelay(200); 1068 1069 /* Register the device as a minor miscellaneous device. */ 1070 err = misc_register(&envctrl_dev); 1071 if (err) { 1072 printk(KERN_ERR PFX "Unable to get misc minor %d\n", 1073 envctrl_dev.minor); 1074 goto out_iounmap; 1075 } 1076 1077 /* Note above traversal routine post-incremented 'i' to accommodate 1078 * a next child device, so we decrement before reverse-traversal of 1079 * child devices. 1080 */ 1081 printk(KERN_INFO PFX "Initialized "); 1082 for (--index; index >= 0; --index) { 1083 printk("[%s 0x%lx]%s", 1084 (I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" : 1085 ((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"), 1086 i2c_childlist[index].addr, (0 == index) ? "\n" : " "); 1087 } 1088 1089 kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld"); 1090 if (IS_ERR(kenvctrld_task)) { 1091 err = PTR_ERR(kenvctrld_task); 1092 goto out_deregister; 1093 } 1094 1095 return 0; 1096 1097out_deregister: 1098 misc_deregister(&envctrl_dev); 1099out_iounmap: 1100 of_iounmap(&op->resource[0], i2c, 0x2); 1101 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1102 kfree(i2c_childlist[index].tables); 1103 1104 return err; 1105} 1106 1107static int __devexit envctrl_remove(struct platform_device *op) 1108{ 1109 int index; 1110 1111 kthread_stop(kenvctrld_task); 1112 1113 of_iounmap(&op->resource[0], i2c, 0x2); 1114 misc_deregister(&envctrl_dev); 1115 1116 for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++) 1117 kfree(i2c_childlist[index].tables); 1118 1119 return 0; 1120} 1121 1122static const struct of_device_id envctrl_match[] = { 1123 { 1124 .name = "i2c", 1125 .compatible = "i2cpcf,8584", 1126 }, 1127 {}, 1128}; 1129MODULE_DEVICE_TABLE(of, envctrl_match); 1130 1131static struct platform_driver envctrl_driver = { 1132 .driver = { 1133 .name = DRIVER_NAME, 1134 .owner = THIS_MODULE, 1135 .of_match_table = envctrl_match, 1136 }, 1137 .probe = envctrl_probe, 1138 .remove = __devexit_p(envctrl_remove), 1139}; 1140 1141module_platform_driver(envctrl_driver); 1142 1143MODULE_LICENSE("GPL"); 1144