1/* 2 comedi/drivers/ni_atmio.c 3 Hardware driver for NI AT-MIO E series cards 4 5 COMEDI - Linux Control and Measurement Device Interface 6 Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21*/ 22/* 23Driver: ni_atmio 24Description: National Instruments AT-MIO-E series 25Author: ds 26Devices: [National Instruments] AT-MIO-16E-1 (ni_atmio), 27 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, 28 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 29Status: works 30Updated: Thu May 1 20:03:02 CDT 2003 31 32The driver has 2.6 kernel isapnp support, and 33will automatically probe for a supported board if the 34I/O base is left unspecified with comedi_config. 35However, many of 36the isapnp id numbers are unknown. If your board is not 37recognized, please send the output of 'cat /proc/isapnp' 38(you may need to modprobe the isa-pnp module for 39/proc/isapnp to exist) so the 40id numbers for your board can be added to the driver. 41 42Otherwise, you can use the isapnptools package to configure 43your board. Use isapnp to 44configure the I/O base and IRQ for the board, and then pass 45the same values as 46parameters in comedi_config. A sample isapnp.conf file is included 47in the etc/ directory of Comedilib. 48 49Comedilib includes a utility to autocalibrate these boards. The 50boards seem to boot into a state where the all calibration DACs 51are at one extreme of their range, thus the default calibration 52is terrible. Calibration at boot is strongly encouraged. 53 54To use the extended digital I/O on some of the boards, enable the 558255 driver when configuring the Comedi source tree. 56 57External triggering is supported for some events. The channel index 58(scan_begin_arg, etc.) maps to PFI0 - PFI9. 59 60Some of the more esoteric triggering possibilities of these boards 61are not supported. 62*/ 63/* 64 The real guts of the driver is in ni_mio_common.c, which is included 65 both here and in ni_pcimio.c 66 67 Interrupt support added by Truxton Fulton <trux@truxton.com> 68 69 References for specifications: 70 71 340747b.pdf Register Level Programmer Manual (obsolete) 72 340747c.pdf Register Level Programmer Manual (new) 73 DAQ-STC reference manual 74 75 Other possibly relevant info: 76 77 320517c.pdf User manual (obsolete) 78 320517f.pdf User manual (new) 79 320889a.pdf delete 80 320906c.pdf maximum signal ratings 81 321066a.pdf about 16x 82 321791a.pdf discontinuation of at-mio-16e-10 rev. c 83 321808a.pdf about at-mio-16e-10 rev P 84 321837a.pdf discontinuation of at-mio-16de-10 rev d 85 321838a.pdf about at-mio-16de-10 rev N 86 87 ISSUES: 88 89 need to deal with external reference for DAC, and other DAC 90 properties in board properties 91 92 deal with at-mio-16de-10 revision D to N changes, etc. 93 94*/ 95 96#include <linux/interrupt.h> 97#include "../comedidev.h" 98 99#include <linux/delay.h> 100#include <linux/isapnp.h> 101 102#include "ni_stc.h" 103#include "8255.h" 104 105#undef DEBUG 106 107#define ATMIO 1 108#undef PCIMIO 109 110/* 111 * AT specific setup 112 */ 113 114#define NI_SIZE 0x20 115 116#define MAX_N_CALDACS 32 117 118static const struct ni_board_struct ni_boards[] = { 119 {.device_id = 44, 120 .isapnp_id = 0x0000, /* XXX unknown */ 121 .name = "at-mio-16e-1", 122 .n_adchan = 16, 123 .adbits = 12, 124 .ai_fifo_depth = 8192, 125 .alwaysdither = 0, 126 .gainlkup = ai_gain_16, 127 .ai_speed = 800, 128 .n_aochan = 2, 129 .aobits = 12, 130 .ao_fifo_depth = 2048, 131 .ao_range_table = &range_ni_E_ao_ext, 132 .ao_unipolar = 1, 133 .ao_speed = 1000, 134 .has_8255 = 0, 135 .num_p0_dio_channels = 8, 136 .caldac = {mb88341}, 137 }, 138 {.device_id = 25, 139 .isapnp_id = 0x1900, 140 .name = "at-mio-16e-2", 141 .n_adchan = 16, 142 .adbits = 12, 143 .ai_fifo_depth = 2048, 144 .alwaysdither = 0, 145 .gainlkup = ai_gain_16, 146 .ai_speed = 2000, 147 .n_aochan = 2, 148 .aobits = 12, 149 .ao_fifo_depth = 2048, 150 .ao_range_table = &range_ni_E_ao_ext, 151 .ao_unipolar = 1, 152 .ao_speed = 1000, 153 .has_8255 = 0, 154 .num_p0_dio_channels = 8, 155 .caldac = {mb88341}, 156 }, 157 {.device_id = 36, 158 .isapnp_id = 0x2400, 159 .name = "at-mio-16e-10", 160 .n_adchan = 16, 161 .adbits = 12, 162 .ai_fifo_depth = 512, 163 .alwaysdither = 0, 164 .gainlkup = ai_gain_16, 165 .ai_speed = 10000, 166 .n_aochan = 2, 167 .aobits = 12, 168 .ao_fifo_depth = 0, 169 .ao_range_table = &range_ni_E_ao_ext, 170 .ao_unipolar = 1, 171 .ao_speed = 10000, 172 .num_p0_dio_channels = 8, 173 .caldac = {ad8804_debug}, 174 .has_8255 = 0, 175 }, 176 {.device_id = 37, 177 .isapnp_id = 0x2500, 178 .name = "at-mio-16de-10", 179 .n_adchan = 16, 180 .adbits = 12, 181 .ai_fifo_depth = 512, 182 .alwaysdither = 0, 183 .gainlkup = ai_gain_16, 184 .ai_speed = 10000, 185 .n_aochan = 2, 186 .aobits = 12, 187 .ao_fifo_depth = 0, 188 .ao_range_table = &range_ni_E_ao_ext, 189 .ao_unipolar = 1, 190 .ao_speed = 10000, 191 .num_p0_dio_channels = 8, 192 .caldac = {ad8804_debug}, 193 .has_8255 = 1, 194 }, 195 {.device_id = 38, 196 .isapnp_id = 0x2600, 197 .name = "at-mio-64e-3", 198 .n_adchan = 64, 199 .adbits = 12, 200 .ai_fifo_depth = 2048, 201 .alwaysdither = 0, 202 .gainlkup = ai_gain_16, 203 .ai_speed = 2000, 204 .n_aochan = 2, 205 .aobits = 12, 206 .ao_fifo_depth = 2048, 207 .ao_range_table = &range_ni_E_ao_ext, 208 .ao_unipolar = 1, 209 .ao_speed = 1000, 210 .has_8255 = 0, 211 .num_p0_dio_channels = 8, 212 .caldac = {ad8804_debug}, 213 }, 214 {.device_id = 39, 215 .isapnp_id = 0x2700, 216 .name = "at-mio-16xe-50", 217 .n_adchan = 16, 218 .adbits = 16, 219 .ai_fifo_depth = 512, 220 .alwaysdither = 1, 221 .gainlkup = ai_gain_8, 222 .ai_speed = 50000, 223 .n_aochan = 2, 224 .aobits = 12, 225 .ao_fifo_depth = 0, 226 .ao_range_table = &range_bipolar10, 227 .ao_unipolar = 0, 228 .ao_speed = 50000, 229 .num_p0_dio_channels = 8, 230 .caldac = {dac8800, dac8043}, 231 .has_8255 = 0, 232 }, 233 {.device_id = 50, 234 .isapnp_id = 0x0000, /* XXX unknown */ 235 .name = "at-mio-16xe-10", 236 .n_adchan = 16, 237 .adbits = 16, 238 .ai_fifo_depth = 512, 239 .alwaysdither = 1, 240 .gainlkup = ai_gain_14, 241 .ai_speed = 10000, 242 .n_aochan = 2, 243 .aobits = 16, 244 .ao_fifo_depth = 2048, 245 .ao_range_table = &range_ni_E_ao_ext, 246 .ao_unipolar = 1, 247 .ao_speed = 1000, 248 .num_p0_dio_channels = 8, 249 .caldac = {dac8800, dac8043, ad8522}, 250 .has_8255 = 0, 251 }, 252 {.device_id = 51, 253 .isapnp_id = 0x0000, /* XXX unknown */ 254 .name = "at-ai-16xe-10", 255 .n_adchan = 16, 256 .adbits = 16, 257 .ai_fifo_depth = 512, 258 .alwaysdither = 1, /* unknown */ 259 .gainlkup = ai_gain_14, 260 .ai_speed = 10000, 261 .n_aochan = 0, 262 .aobits = 0, 263 .ao_fifo_depth = 0, 264 .ao_unipolar = 0, 265 .num_p0_dio_channels = 8, 266 .caldac = {dac8800, dac8043, ad8522}, 267 .has_8255 = 0, 268 } 269}; 270 271static const int ni_irqpin[] = { 272 -1, -1, -1, 0, 1, 2, -1, 3, -1, -1, 4, 5, 6, -1, -1, 7 273}; 274 275#define interrupt_pin(a) (ni_irqpin[(a)]) 276 277#define IRQ_POLARITY 0 278 279#define NI_E_IRQ_FLAGS 0 280 281struct ni_private { 282 struct pnp_dev *isapnp_dev; 283 NI_PRIVATE_COMMON 284 285}; 286 287#define devpriv ((struct ni_private *)dev->private) 288 289/* How we access registers */ 290 291#define ni_writel(a, b) (outl((a), (b)+dev->iobase)) 292#define ni_readl(a) (inl((a)+dev->iobase)) 293#define ni_writew(a, b) (outw((a), (b)+dev->iobase)) 294#define ni_readw(a) (inw((a)+dev->iobase)) 295#define ni_writeb(a, b) (outb((a), (b)+dev->iobase)) 296#define ni_readb(a) (inb((a)+dev->iobase)) 297 298/* How we access windowed registers */ 299 300/* We automatically take advantage of STC registers that can be 301 * read/written directly in the I/O space of the board. The 302 * AT-MIO devices map the low 8 STC registers to iobase+addr*2. */ 303 304static void ni_atmio_win_out(struct comedi_device *dev, uint16_t data, int addr) 305{ 306 unsigned long flags; 307 308 spin_lock_irqsave(&devpriv->window_lock, flags); 309 if ((addr) < 8) { 310 ni_writew(data, addr * 2); 311 } else { 312 ni_writew(addr, Window_Address); 313 ni_writew(data, Window_Data); 314 } 315 spin_unlock_irqrestore(&devpriv->window_lock, flags); 316} 317 318static uint16_t ni_atmio_win_in(struct comedi_device *dev, int addr) 319{ 320 unsigned long flags; 321 uint16_t ret; 322 323 spin_lock_irqsave(&devpriv->window_lock, flags); 324 if (addr < 8) { 325 ret = ni_readw(addr * 2); 326 } else { 327 ni_writew(addr, Window_Address); 328 ret = ni_readw(Window_Data); 329 } 330 spin_unlock_irqrestore(&devpriv->window_lock, flags); 331 332 return ret; 333} 334 335static struct pnp_device_id device_ids[] = { 336 {.id = "NIC1900", .driver_data = 0}, 337 {.id = "NIC2400", .driver_data = 0}, 338 {.id = "NIC2500", .driver_data = 0}, 339 {.id = "NIC2600", .driver_data = 0}, 340 {.id = "NIC2700", .driver_data = 0}, 341 {.id = ""} 342}; 343 344MODULE_DEVICE_TABLE(pnp, device_ids); 345 346static int ni_atmio_attach(struct comedi_device *dev, 347 struct comedi_devconfig *it); 348static int ni_atmio_detach(struct comedi_device *dev); 349static struct comedi_driver driver_atmio = { 350 .driver_name = "ni_atmio", 351 .module = THIS_MODULE, 352 .attach = ni_atmio_attach, 353 .detach = ni_atmio_detach, 354}; 355 356static int __init driver_atmio_init_module(void) 357{ 358 return comedi_driver_register(&driver_atmio); 359} 360 361static void __exit driver_atmio_cleanup_module(void) 362{ 363 comedi_driver_unregister(&driver_atmio); 364} 365 366module_init(driver_atmio_init_module); 367module_exit(driver_atmio_cleanup_module); 368 369#include "ni_mio_common.c" 370 371static int ni_getboardtype(struct comedi_device *dev); 372 373/* clean up allocated resources */ 374static int ni_atmio_detach(struct comedi_device *dev) 375{ 376 mio_common_detach(dev); 377 378 if (dev->iobase) 379 release_region(dev->iobase, NI_SIZE); 380 if (dev->irq) 381 free_irq(dev->irq, dev); 382 383 if (devpriv->isapnp_dev) 384 pnp_device_detach(devpriv->isapnp_dev); 385 386 return 0; 387} 388 389static int ni_isapnp_find_board(struct pnp_dev **dev) 390{ 391 struct pnp_dev *isapnp_dev = NULL; 392 int i; 393 394 for (i = 0; i < n_ni_boards; i++) { 395 isapnp_dev = pnp_find_dev(NULL, 396 ISAPNP_VENDOR('N', 'I', 'C'), 397 ISAPNP_FUNCTION(ni_boards[i]. 398 isapnp_id), NULL); 399 400 if (isapnp_dev == NULL || isapnp_dev->card == NULL) 401 continue; 402 403 if (pnp_device_attach(isapnp_dev) < 0) { 404 printk 405 ("ni_atmio: %s found but already active, skipping.\n", 406 ni_boards[i].name); 407 continue; 408 } 409 if (pnp_activate_dev(isapnp_dev) < 0) { 410 pnp_device_detach(isapnp_dev); 411 return -EAGAIN; 412 } 413 if (!pnp_port_valid(isapnp_dev, 0) 414 || !pnp_irq_valid(isapnp_dev, 0)) { 415 pnp_device_detach(isapnp_dev); 416 printk("ni_atmio: pnp invalid port or irq, aborting\n"); 417 return -ENOMEM; 418 } 419 break; 420 } 421 if (i == n_ni_boards) 422 return -ENODEV; 423 *dev = isapnp_dev; 424 return 0; 425} 426 427static int ni_atmio_attach(struct comedi_device *dev, 428 struct comedi_devconfig *it) 429{ 430 struct pnp_dev *isapnp_dev; 431 int ret; 432 unsigned long iobase; 433 int board; 434 unsigned int irq; 435 436 /* allocate private area */ 437 ret = ni_alloc_private(dev); 438 if (ret < 0) 439 return ret; 440 441 devpriv->stc_writew = &ni_atmio_win_out; 442 devpriv->stc_readw = &ni_atmio_win_in; 443 devpriv->stc_writel = &win_out2; 444 devpriv->stc_readl = &win_in2; 445 446 iobase = it->options[0]; 447 irq = it->options[1]; 448 isapnp_dev = NULL; 449 if (iobase == 0) { 450 ret = ni_isapnp_find_board(&isapnp_dev); 451 if (ret < 0) 452 return ret; 453 454 iobase = pnp_port_start(isapnp_dev, 0); 455 irq = pnp_irq(isapnp_dev, 0); 456 devpriv->isapnp_dev = isapnp_dev; 457 } 458 459 /* reserve our I/O region */ 460 461 printk("comedi%d: ni_atmio: 0x%04lx", dev->minor, iobase); 462 if (!request_region(iobase, NI_SIZE, "ni_atmio")) { 463 printk(" I/O port conflict\n"); 464 return -EIO; 465 } 466 467 dev->iobase = iobase; 468 469#ifdef DEBUG 470 /* board existence sanity check */ 471 { 472 int i; 473 474 printk(" board fingerprint:"); 475 for (i = 0; i < 16; i += 2) { 476 printk(" %04x %02x", inw(dev->iobase + i), 477 inb(dev->iobase + i + 1)); 478 } 479 } 480#endif 481 482 /* get board type */ 483 484 board = ni_getboardtype(dev); 485 if (board < 0) 486 return -EIO; 487 488 dev->board_ptr = ni_boards + board; 489 490 printk(" %s", boardtype.name); 491 dev->board_name = boardtype.name; 492 493 /* irq stuff */ 494 495 if (irq != 0) { 496 if (irq > 15 || ni_irqpin[irq] == -1) { 497 printk(" invalid irq %u\n", irq); 498 return -EINVAL; 499 } 500 printk(" ( irq = %u )", irq); 501 ret = request_irq(irq, ni_E_interrupt, NI_E_IRQ_FLAGS, 502 "ni_atmio", dev); 503 504 if (ret < 0) { 505 printk(" irq not available\n"); 506 return -EINVAL; 507 } 508 dev->irq = irq; 509 } 510 511 /* generic E series stuff in ni_mio_common.c */ 512 513 ret = ni_E_init(dev, it); 514 if (ret < 0) 515 return ret; 516 517 518 return 0; 519} 520 521static int ni_getboardtype(struct comedi_device *dev) 522{ 523 int device_id = ni_read_eeprom(dev, 511); 524 int i; 525 526 for (i = 0; i < n_ni_boards; i++) { 527 if (ni_boards[i].device_id == device_id) 528 return i; 529 530 } 531 if (device_id == 255) 532 printk(" can't find board\n"); 533 else if (device_id == 0) 534 printk(" EEPROM read error (?) or device not found\n"); 535 else 536 printk(" unknown device ID %d -- contact author\n", device_id); 537 538 return -1; 539} 540