ni_atmio.c revision 8ab41df0d7399567372d75d1a3c552dccb42063d
1/* 2 comedi/drivers/ni_atmio.c 3 Hardware driver for NI AT-MIO E series cards 4 5 COMEDI - Linux Control and Measurement Device Interface 6 Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21*/ 22/* 23Driver: ni_atmio 24Description: National Instruments AT-MIO-E series 25Author: ds 26Devices: [National Instruments] AT-MIO-16E-1 (ni_atmio), 27 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, 28 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 29Status: works 30Updated: Thu May 1 20:03:02 CDT 2003 31 32The driver has 2.6 kernel isapnp support, and 33will automatically probe for a supported board if the 34I/O base is left unspecified with comedi_config. 35However, many of 36the isapnp id numbers are unknown. If your board is not 37recognized, please send the output of 'cat /proc/isapnp' 38(you may need to modprobe the isa-pnp module for 39/proc/isapnp to exist) so the 40id numbers for your board can be added to the driver. 41 42Otherwise, you can use the isapnptools package to configure 43your board. Use isapnp to 44configure the I/O base and IRQ for the board, and then pass 45the same values as 46parameters in comedi_config. A sample isapnp.conf file is included 47in the etc/ directory of Comedilib. 48 49Comedilib includes a utility to autocalibrate these boards. The 50boards seem to boot into a state where the all calibration DACs 51are at one extreme of their range, thus the default calibration 52is terrible. Calibration at boot is strongly encouraged. 53 54To use the extended digital I/O on some of the boards, enable the 558255 driver when configuring the Comedi source tree. 56 57External triggering is supported for some events. The channel index 58(scan_begin_arg, etc.) maps to PFI0 - PFI9. 59 60Some of the more esoteric triggering possibilities of these boards 61are not supported. 62*/ 63/* 64 The real guts of the driver is in ni_mio_common.c, which is included 65 both here and in ni_pcimio.c 66 67 Interrupt support added by Truxton Fulton <trux@truxton.com> 68 69 References for specifications: 70 71 340747b.pdf Register Level Programmer Manual (obsolete) 72 340747c.pdf Register Level Programmer Manual (new) 73 DAQ-STC reference manual 74 75 Other possibly relevant info: 76 77 320517c.pdf User manual (obsolete) 78 320517f.pdf User manual (new) 79 320889a.pdf delete 80 320906c.pdf maximum signal ratings 81 321066a.pdf about 16x 82 321791a.pdf discontinuation of at-mio-16e-10 rev. c 83 321808a.pdf about at-mio-16e-10 rev P 84 321837a.pdf discontinuation of at-mio-16de-10 rev d 85 321838a.pdf about at-mio-16de-10 rev N 86 87 ISSUES: 88 89 need to deal with external reference for DAC, and other DAC 90 properties in board properties 91 92 deal with at-mio-16de-10 revision D to N changes, etc. 93 94*/ 95 96#include "../comedidev.h" 97 98#include <linux/delay.h> 99#include <linux/isapnp.h> 100 101#include "ni_stc.h" 102#include "8255.h" 103 104#undef DEBUG 105 106#define ATMIO 1 107#undef PCIMIO 108 109/* 110 * AT specific setup 111 */ 112 113#define NI_SIZE 0x20 114 115#define MAX_N_CALDACS 32 116 117static const struct ni_board_struct ni_boards[] = { 118 {device_id:44, 119 isapnp_id:0x0000,/* XXX unknown */ 120 name: "at-mio-16e-1", 121 n_adchan:16, 122 adbits: 12, 123 ai_fifo_depth:8192, 124 alwaysdither:0, 125 gainlkup:ai_gain_16, 126 ai_speed:800, 127 n_aochan:2, 128 aobits: 12, 129 ao_fifo_depth:2048, 130 .ao_range_table = &range_ni_E_ao_ext, 131 ao_unipolar:1, 132 ao_speed:1000, 133 has_8255:0, 134 .num_p0_dio_channels = 8, 135 caldac: {mb88341}, 136 }, 137 {device_id:25, 138 isapnp_id:0x1900, 139 name: "at-mio-16e-2", 140 n_adchan:16, 141 adbits: 12, 142 ai_fifo_depth:2048, 143 alwaysdither:0, 144 gainlkup:ai_gain_16, 145 ai_speed:2000, 146 n_aochan:2, 147 aobits: 12, 148 ao_fifo_depth:2048, 149 .ao_range_table = &range_ni_E_ao_ext, 150 ao_unipolar:1, 151 ao_speed:1000, 152 has_8255:0, 153 .num_p0_dio_channels = 8, 154 caldac: {mb88341}, 155 }, 156 {device_id:36, 157 isapnp_id:0x2400, 158 name: "at-mio-16e-10", 159 n_adchan:16, 160 adbits: 12, 161 ai_fifo_depth:512, 162 alwaysdither:0, 163 gainlkup:ai_gain_16, 164 ai_speed:10000, 165 n_aochan:2, 166 aobits: 12, 167 ao_fifo_depth:0, 168 .ao_range_table = &range_ni_E_ao_ext, 169 ao_unipolar:1, 170 ao_speed:10000, 171 .num_p0_dio_channels = 8, 172 caldac: {ad8804_debug}, 173 has_8255:0, 174 }, 175 {device_id:37, 176 isapnp_id:0x2500, 177 name: "at-mio-16de-10", 178 n_adchan:16, 179 adbits: 12, 180 ai_fifo_depth:512, 181 alwaysdither:0, 182 gainlkup:ai_gain_16, 183 ai_speed:10000, 184 n_aochan:2, 185 aobits: 12, 186 ao_fifo_depth:0, 187 .ao_range_table = &range_ni_E_ao_ext, 188 ao_unipolar:1, 189 ao_speed:10000, 190 .num_p0_dio_channels = 8, 191 caldac: {ad8804_debug}, 192 has_8255:1, 193 }, 194 {device_id:38, 195 isapnp_id:0x2600, 196 name: "at-mio-64e-3", 197 n_adchan:64, 198 adbits: 12, 199 ai_fifo_depth:2048, 200 alwaysdither:0, 201 gainlkup:ai_gain_16, 202 ai_speed:2000, 203 n_aochan:2, 204 aobits: 12, 205 ao_fifo_depth:2048, 206 .ao_range_table = &range_ni_E_ao_ext, 207 ao_unipolar:1, 208 ao_speed:1000, 209 has_8255:0, 210 .num_p0_dio_channels = 8, 211 caldac: {ad8804_debug}, 212 }, 213 {device_id:39, 214 isapnp_id:0x2700, 215 name: "at-mio-16xe-50", 216 n_adchan:16, 217 adbits: 16, 218 ai_fifo_depth:512, 219 alwaysdither:1, 220 gainlkup:ai_gain_8, 221 ai_speed:50000, 222 n_aochan:2, 223 aobits: 12, 224 ao_fifo_depth:0, 225 .ao_range_table = &range_bipolar10, 226 ao_unipolar:0, 227 ao_speed:50000, 228 .num_p0_dio_channels = 8, 229 caldac: {dac8800, dac8043}, 230 has_8255:0, 231 }, 232 {device_id:50, 233 isapnp_id:0x0000,/* XXX unknown */ 234 name: "at-mio-16xe-10", 235 n_adchan:16, 236 adbits: 16, 237 ai_fifo_depth:512, 238 alwaysdither:1, 239 gainlkup:ai_gain_14, 240 ai_speed:10000, 241 n_aochan:2, 242 aobits: 16, 243 ao_fifo_depth:2048, 244 .ao_range_table = &range_ni_E_ao_ext, 245 ao_unipolar:1, 246 ao_speed:1000, 247 .num_p0_dio_channels = 8, 248 caldac: {dac8800, dac8043, ad8522}, 249 has_8255:0, 250 }, 251 {device_id:51, 252 isapnp_id:0x0000,/* XXX unknown */ 253 name: "at-ai-16xe-10", 254 n_adchan:16, 255 adbits: 16, 256 ai_fifo_depth:512, 257 alwaysdither:1, /* unknown */ 258 gainlkup:ai_gain_14, 259 ai_speed:10000, 260 n_aochan:0, 261 aobits: 0, 262 ao_fifo_depth:0, 263 ao_unipolar:0, 264 .num_p0_dio_channels = 8, 265 caldac: {dac8800, dac8043, ad8522}, 266 has_8255:0, 267 } 268}; 269 270static const int ni_irqpin[] = 271 { -1, -1, -1, 0, 1, 2, -1, 3, -1, -1, 4, 5, 6, -1, -1, 7 }; 272 273#define interrupt_pin(a) (ni_irqpin[(a)]) 274 275#define IRQ_POLARITY 0 276 277#define NI_E_IRQ_FLAGS 0 278 279typedef struct { 280 struct pnp_dev *isapnp_dev; 281 NI_PRIVATE_COMMON} ni_private; 282#define devpriv ((ni_private *)dev->private) 283 284/* How we access registers */ 285 286#define ni_writel(a,b) (outl((a),(b)+dev->iobase)) 287#define ni_readl(a) (inl((a)+dev->iobase)) 288#define ni_writew(a,b) (outw((a),(b)+dev->iobase)) 289#define ni_readw(a) (inw((a)+dev->iobase)) 290#define ni_writeb(a,b) (outb((a),(b)+dev->iobase)) 291#define ni_readb(a) (inb((a)+dev->iobase)) 292 293/* How we access windowed registers */ 294 295/* We automatically take advantage of STC registers that can be 296 * read/written directly in the I/O space of the board. The 297 * AT-MIO devices map the low 8 STC registers to iobase+addr*2. */ 298 299static void ni_atmio_win_out(struct comedi_device * dev, uint16_t data, int addr) 300{ 301 unsigned long flags; 302 303 comedi_spin_lock_irqsave(&devpriv->window_lock, flags); 304 if ((addr) < 8) { 305 ni_writew(data, addr * 2); 306 } else { 307 ni_writew(addr, Window_Address); 308 ni_writew(data, Window_Data); 309 } 310 comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags); 311} 312 313static uint16_t ni_atmio_win_in(struct comedi_device * dev, int addr) 314{ 315 unsigned long flags; 316 uint16_t ret; 317 318 comedi_spin_lock_irqsave(&devpriv->window_lock, flags); 319 if (addr < 8) { 320 ret = ni_readw(addr * 2); 321 } else { 322 ni_writew(addr, Window_Address); 323 ret = ni_readw(Window_Data); 324 } 325 comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags); 326 327 return ret; 328} 329 330static struct pnp_device_id device_ids[] = { 331 {.id = "NIC1900",.driver_data = 0}, 332 {.id = "NIC2400",.driver_data = 0}, 333 {.id = "NIC2500",.driver_data = 0}, 334 {.id = "NIC2600",.driver_data = 0}, 335 {.id = "NIC2700",.driver_data = 0}, 336 {.id = ""} 337}; 338 339MODULE_DEVICE_TABLE(pnp, device_ids); 340 341static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig * it); 342static int ni_atmio_detach(struct comedi_device * dev); 343static struct comedi_driver driver_atmio = { 344 driver_name:"ni_atmio", 345 module:THIS_MODULE, 346 attach:ni_atmio_attach, 347 detach:ni_atmio_detach, 348}; 349 350COMEDI_INITCLEANUP(driver_atmio); 351 352#include "ni_mio_common.c" 353 354static int ni_getboardtype(struct comedi_device * dev); 355 356/* clean up allocated resources */ 357static int ni_atmio_detach(struct comedi_device * dev) 358{ 359 mio_common_detach(dev); 360 361 if (dev->iobase) 362 release_region(dev->iobase, NI_SIZE); 363 if (dev->irq) { 364 comedi_free_irq(dev->irq, dev); 365 } 366 if (devpriv->isapnp_dev) 367 pnp_device_detach(devpriv->isapnp_dev); 368 369 return 0; 370} 371 372static int ni_isapnp_find_board(struct pnp_dev **dev) 373{ 374 struct pnp_dev *isapnp_dev = NULL; 375 int i; 376 377 for (i = 0; i < n_ni_boards; i++) { 378 isapnp_dev = pnp_find_dev(NULL, 379 ISAPNP_VENDOR('N', 'I', 'C'), 380 ISAPNP_FUNCTION(ni_boards[i].isapnp_id), NULL); 381 382 if (isapnp_dev == NULL || isapnp_dev->card == NULL) 383 continue; 384 385 if (pnp_device_attach(isapnp_dev) < 0) { 386 printk("ni_atmio: %s found but already active, skipping.\n", ni_boards[i].name); 387 continue; 388 } 389 if (pnp_activate_dev(isapnp_dev) < 0) { 390 pnp_device_detach(isapnp_dev); 391 return -EAGAIN; 392 } 393 if (!pnp_port_valid(isapnp_dev, 0) 394 || !pnp_irq_valid(isapnp_dev, 0)) { 395 pnp_device_detach(isapnp_dev); 396 printk("ni_atmio: pnp invalid port or irq, aborting\n"); 397 return -ENOMEM; 398 } 399 break; 400 } 401 if (i == n_ni_boards) 402 return -ENODEV; 403 *dev = isapnp_dev; 404 return 0; 405} 406 407static int ni_atmio_attach(struct comedi_device * dev, struct comedi_devconfig * it) 408{ 409 struct pnp_dev *isapnp_dev; 410 int ret; 411 unsigned long iobase; 412 int board; 413 unsigned int irq; 414 415 /* allocate private area */ 416 if ((ret = ni_alloc_private(dev)) < 0) 417 return ret; 418 devpriv->stc_writew = &ni_atmio_win_out; 419 devpriv->stc_readw = &ni_atmio_win_in; 420 devpriv->stc_writel = &win_out2; 421 devpriv->stc_readl = &win_in2; 422 423 iobase = it->options[0]; 424 irq = it->options[1]; 425 isapnp_dev = NULL; 426 if (iobase == 0) { 427 ret = ni_isapnp_find_board(&isapnp_dev); 428 if (ret < 0) 429 return ret; 430 431 iobase = pnp_port_start(isapnp_dev, 0); 432 irq = pnp_irq(isapnp_dev, 0); 433 devpriv->isapnp_dev = isapnp_dev; 434 } 435 436 /* reserve our I/O region */ 437 438 printk("comedi%d: ni_atmio: 0x%04lx", dev->minor, iobase); 439 if (!request_region(iobase, NI_SIZE, "ni_atmio")) { 440 printk(" I/O port conflict\n"); 441 return -EIO; 442 } 443 444 dev->iobase = iobase; 445 446#ifdef DEBUG 447 /* board existence sanity check */ 448 { 449 int i; 450 451 printk(" board fingerprint:"); 452 for (i = 0; i < 16; i += 2) { 453 printk(" %04x %02x", inw(dev->iobase + i), 454 inb(dev->iobase + i + 1)); 455 } 456 } 457#endif 458 459 /* get board type */ 460 461 board = ni_getboardtype(dev); 462 if (board < 0) 463 return -EIO; 464 465 dev->board_ptr = ni_boards + board; 466 467 printk(" %s", boardtype.name); 468 dev->board_name = boardtype.name; 469 470 /* irq stuff */ 471 472 if (irq != 0) { 473 if (irq > 15 || ni_irqpin[irq] == -1) { 474 printk(" invalid irq %u\n", irq); 475 return -EINVAL; 476 } 477 printk(" ( irq = %u )", irq); 478 if ((ret = comedi_request_irq(irq, ni_E_interrupt, 479 NI_E_IRQ_FLAGS, "ni_atmio", dev)) < 0) { 480 printk(" irq not available\n"); 481 return -EINVAL; 482 } 483 dev->irq = irq; 484 } 485 486 /* generic E series stuff in ni_mio_common.c */ 487 488 if ((ret = ni_E_init(dev, it)) < 0) { 489 return ret; 490 } 491 492 return 0; 493} 494 495static int ni_getboardtype(struct comedi_device * dev) 496{ 497 int device_id = ni_read_eeprom(dev, 511); 498 int i; 499 500 for (i = 0; i < n_ni_boards; i++) { 501 if (ni_boards[i].device_id == device_id) { 502 return i; 503 } 504 } 505 if (device_id == 255) { 506 printk(" can't find board\n"); 507 } else if (device_id == 0) { 508 printk(" EEPROM read error (?) or device not found\n"); 509 } else { 510 printk(" unknown device ID %d -- contact author\n", device_id); 511 } 512 return -1; 513} 514