ni_atmio.c revision da91b2692e0939b307f9047192d2b9fe07793e7a
1/* 2 comedi/drivers/ni_atmio.c 3 Hardware driver for NI AT-MIO E series cards 4 5 COMEDI - Linux Control and Measurement Device Interface 6 Copyright (C) 1997-2001 David A. Schleef <ds@schleef.org> 7 8 This program is free software; you can redistribute it and/or modify 9 it under the terms of the GNU General Public License as published by 10 the Free Software Foundation; either version 2 of the License, or 11 (at your option) any later version. 12 13 This program is distributed in the hope that it will be useful, 14 but WITHOUT ANY WARRANTY; without even the implied warranty of 15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 GNU General Public License for more details. 17 18 You should have received a copy of the GNU General Public License 19 along with this program; if not, write to the Free Software 20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21*/ 22/* 23Driver: ni_atmio 24Description: National Instruments AT-MIO-E series 25Author: ds 26Devices: [National Instruments] AT-MIO-16E-1 (ni_atmio), 27 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3, 28 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10 29Status: works 30Updated: Thu May 1 20:03:02 CDT 2003 31 32The driver has 2.6 kernel isapnp support, and 33will automatically probe for a supported board if the 34I/O base is left unspecified with comedi_config. 35However, many of 36the isapnp id numbers are unknown. If your board is not 37recognized, please send the output of 'cat /proc/isapnp' 38(you may need to modprobe the isa-pnp module for 39/proc/isapnp to exist) so the 40id numbers for your board can be added to the driver. 41 42Otherwise, you can use the isapnptools package to configure 43your board. Use isapnp to 44configure the I/O base and IRQ for the board, and then pass 45the same values as 46parameters in comedi_config. A sample isapnp.conf file is included 47in the etc/ directory of Comedilib. 48 49Comedilib includes a utility to autocalibrate these boards. The 50boards seem to boot into a state where the all calibration DACs 51are at one extreme of their range, thus the default calibration 52is terrible. Calibration at boot is strongly encouraged. 53 54To use the extended digital I/O on some of the boards, enable the 558255 driver when configuring the Comedi source tree. 56 57External triggering is supported for some events. The channel index 58(scan_begin_arg, etc.) maps to PFI0 - PFI9. 59 60Some of the more esoteric triggering possibilities of these boards 61are not supported. 62*/ 63/* 64 The real guts of the driver is in ni_mio_common.c, which is included 65 both here and in ni_pcimio.c 66 67 Interrupt support added by Truxton Fulton <trux@truxton.com> 68 69 References for specifications: 70 71 340747b.pdf Register Level Programmer Manual (obsolete) 72 340747c.pdf Register Level Programmer Manual (new) 73 DAQ-STC reference manual 74 75 Other possibly relevant info: 76 77 320517c.pdf User manual (obsolete) 78 320517f.pdf User manual (new) 79 320889a.pdf delete 80 320906c.pdf maximum signal ratings 81 321066a.pdf about 16x 82 321791a.pdf discontinuation of at-mio-16e-10 rev. c 83 321808a.pdf about at-mio-16e-10 rev P 84 321837a.pdf discontinuation of at-mio-16de-10 rev d 85 321838a.pdf about at-mio-16de-10 rev N 86 87 ISSUES: 88 89 need to deal with external reference for DAC, and other DAC 90 properties in board properties 91 92 deal with at-mio-16de-10 revision D to N changes, etc. 93 94*/ 95 96#include "../comedidev.h" 97 98#include <linux/delay.h> 99#include <linux/isapnp.h> 100 101#include "ni_stc.h" 102#include "8255.h" 103 104#undef DEBUG 105 106#define ATMIO 1 107#undef PCIMIO 108 109/* 110 * AT specific setup 111 */ 112 113#define NI_SIZE 0x20 114 115#define MAX_N_CALDACS 32 116 117static const struct ni_board_struct ni_boards[] = { 118 {device_id:44, 119 isapnp_id:0x0000,/* XXX unknown */ 120 name: "at-mio-16e-1", 121 n_adchan:16, 122 adbits: 12, 123 ai_fifo_depth:8192, 124 alwaysdither:0, 125 gainlkup:ai_gain_16, 126 ai_speed:800, 127 n_aochan:2, 128 aobits: 12, 129 ao_fifo_depth:2048, 130 .ao_range_table = &range_ni_E_ao_ext, 131 ao_unipolar:1, 132 ao_speed:1000, 133 has_8255:0, 134 .num_p0_dio_channels = 8, 135 caldac: {mb88341}, 136 }, 137 {device_id:25, 138 isapnp_id:0x1900, 139 name: "at-mio-16e-2", 140 n_adchan:16, 141 adbits: 12, 142 ai_fifo_depth:2048, 143 alwaysdither:0, 144 gainlkup:ai_gain_16, 145 ai_speed:2000, 146 n_aochan:2, 147 aobits: 12, 148 ao_fifo_depth:2048, 149 .ao_range_table = &range_ni_E_ao_ext, 150 ao_unipolar:1, 151 ao_speed:1000, 152 has_8255:0, 153 .num_p0_dio_channels = 8, 154 caldac: {mb88341}, 155 }, 156 {device_id:36, 157 isapnp_id:0x2400, 158 name: "at-mio-16e-10", 159 n_adchan:16, 160 adbits: 12, 161 ai_fifo_depth:512, 162 alwaysdither:0, 163 gainlkup:ai_gain_16, 164 ai_speed:10000, 165 n_aochan:2, 166 aobits: 12, 167 ao_fifo_depth:0, 168 .ao_range_table = &range_ni_E_ao_ext, 169 ao_unipolar:1, 170 ao_speed:10000, 171 .num_p0_dio_channels = 8, 172 caldac: {ad8804_debug}, 173 has_8255:0, 174 }, 175 {device_id:37, 176 isapnp_id:0x2500, 177 name: "at-mio-16de-10", 178 n_adchan:16, 179 adbits: 12, 180 ai_fifo_depth:512, 181 alwaysdither:0, 182 gainlkup:ai_gain_16, 183 ai_speed:10000, 184 n_aochan:2, 185 aobits: 12, 186 ao_fifo_depth:0, 187 .ao_range_table = &range_ni_E_ao_ext, 188 ao_unipolar:1, 189 ao_speed:10000, 190 .num_p0_dio_channels = 8, 191 caldac: {ad8804_debug}, 192 has_8255:1, 193 }, 194 {device_id:38, 195 isapnp_id:0x2600, 196 name: "at-mio-64e-3", 197 n_adchan:64, 198 adbits: 12, 199 ai_fifo_depth:2048, 200 alwaysdither:0, 201 gainlkup:ai_gain_16, 202 ai_speed:2000, 203 n_aochan:2, 204 aobits: 12, 205 ao_fifo_depth:2048, 206 .ao_range_table = &range_ni_E_ao_ext, 207 ao_unipolar:1, 208 ao_speed:1000, 209 has_8255:0, 210 .num_p0_dio_channels = 8, 211 caldac: {ad8804_debug}, 212 }, 213 {device_id:39, 214 isapnp_id:0x2700, 215 name: "at-mio-16xe-50", 216 n_adchan:16, 217 adbits: 16, 218 ai_fifo_depth:512, 219 alwaysdither:1, 220 gainlkup:ai_gain_8, 221 ai_speed:50000, 222 n_aochan:2, 223 aobits: 12, 224 ao_fifo_depth:0, 225 .ao_range_table = &range_bipolar10, 226 ao_unipolar:0, 227 ao_speed:50000, 228 .num_p0_dio_channels = 8, 229 caldac: {dac8800, dac8043}, 230 has_8255:0, 231 }, 232 {device_id:50, 233 isapnp_id:0x0000,/* XXX unknown */ 234 name: "at-mio-16xe-10", 235 n_adchan:16, 236 adbits: 16, 237 ai_fifo_depth:512, 238 alwaysdither:1, 239 gainlkup:ai_gain_14, 240 ai_speed:10000, 241 n_aochan:2, 242 aobits: 16, 243 ao_fifo_depth:2048, 244 .ao_range_table = &range_ni_E_ao_ext, 245 ao_unipolar:1, 246 ao_speed:1000, 247 .num_p0_dio_channels = 8, 248 caldac: {dac8800, dac8043, ad8522}, 249 has_8255:0, 250 }, 251 {device_id:51, 252 isapnp_id:0x0000,/* XXX unknown */ 253 name: "at-ai-16xe-10", 254 n_adchan:16, 255 adbits: 16, 256 ai_fifo_depth:512, 257 alwaysdither:1, /* unknown */ 258 gainlkup:ai_gain_14, 259 ai_speed:10000, 260 n_aochan:0, 261 aobits: 0, 262 ao_fifo_depth:0, 263 ao_unipolar:0, 264 .num_p0_dio_channels = 8, 265 caldac: {dac8800, dac8043, ad8522}, 266 has_8255:0, 267 } 268}; 269 270static const int ni_irqpin[] = 271 { -1, -1, -1, 0, 1, 2, -1, 3, -1, -1, 4, 5, 6, -1, -1, 7 }; 272 273#define interrupt_pin(a) (ni_irqpin[(a)]) 274 275#define IRQ_POLARITY 0 276 277#define NI_E_IRQ_FLAGS 0 278 279struct ni_private { 280 struct pnp_dev *isapnp_dev; 281 NI_PRIVATE_COMMON 282}; 283#define devpriv ((struct ni_private *)dev->private) 284 285/* How we access registers */ 286 287#define ni_writel(a,b) (outl((a),(b)+dev->iobase)) 288#define ni_readl(a) (inl((a)+dev->iobase)) 289#define ni_writew(a,b) (outw((a),(b)+dev->iobase)) 290#define ni_readw(a) (inw((a)+dev->iobase)) 291#define ni_writeb(a,b) (outb((a),(b)+dev->iobase)) 292#define ni_readb(a) (inb((a)+dev->iobase)) 293 294/* How we access windowed registers */ 295 296/* We automatically take advantage of STC registers that can be 297 * read/written directly in the I/O space of the board. The 298 * AT-MIO devices map the low 8 STC registers to iobase+addr*2. */ 299 300static void ni_atmio_win_out(struct comedi_device *dev, uint16_t data, int addr) 301{ 302 unsigned long flags; 303 304 comedi_spin_lock_irqsave(&devpriv->window_lock, flags); 305 if ((addr) < 8) { 306 ni_writew(data, addr * 2); 307 } else { 308 ni_writew(addr, Window_Address); 309 ni_writew(data, Window_Data); 310 } 311 comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags); 312} 313 314static uint16_t ni_atmio_win_in(struct comedi_device *dev, int addr) 315{ 316 unsigned long flags; 317 uint16_t ret; 318 319 comedi_spin_lock_irqsave(&devpriv->window_lock, flags); 320 if (addr < 8) { 321 ret = ni_readw(addr * 2); 322 } else { 323 ni_writew(addr, Window_Address); 324 ret = ni_readw(Window_Data); 325 } 326 comedi_spin_unlock_irqrestore(&devpriv->window_lock, flags); 327 328 return ret; 329} 330 331static struct pnp_device_id device_ids[] = { 332 {.id = "NIC1900",.driver_data = 0}, 333 {.id = "NIC2400",.driver_data = 0}, 334 {.id = "NIC2500",.driver_data = 0}, 335 {.id = "NIC2600",.driver_data = 0}, 336 {.id = "NIC2700",.driver_data = 0}, 337 {.id = ""} 338}; 339 340MODULE_DEVICE_TABLE(pnp, device_ids); 341 342static int ni_atmio_attach(struct comedi_device *dev, struct comedi_devconfig *it); 343static int ni_atmio_detach(struct comedi_device *dev); 344static struct comedi_driver driver_atmio = { 345 driver_name:"ni_atmio", 346 module:THIS_MODULE, 347 attach:ni_atmio_attach, 348 detach:ni_atmio_detach, 349}; 350 351COMEDI_INITCLEANUP(driver_atmio); 352 353#include "ni_mio_common.c" 354 355static int ni_getboardtype(struct comedi_device *dev); 356 357/* clean up allocated resources */ 358static int ni_atmio_detach(struct comedi_device *dev) 359{ 360 mio_common_detach(dev); 361 362 if (dev->iobase) 363 release_region(dev->iobase, NI_SIZE); 364 if (dev->irq) { 365 comedi_free_irq(dev->irq, dev); 366 } 367 if (devpriv->isapnp_dev) 368 pnp_device_detach(devpriv->isapnp_dev); 369 370 return 0; 371} 372 373static int ni_isapnp_find_board(struct pnp_dev **dev) 374{ 375 struct pnp_dev *isapnp_dev = NULL; 376 int i; 377 378 for (i = 0; i < n_ni_boards; i++) { 379 isapnp_dev = pnp_find_dev(NULL, 380 ISAPNP_VENDOR('N', 'I', 'C'), 381 ISAPNP_FUNCTION(ni_boards[i].isapnp_id), NULL); 382 383 if (isapnp_dev == NULL || isapnp_dev->card == NULL) 384 continue; 385 386 if (pnp_device_attach(isapnp_dev) < 0) { 387 printk("ni_atmio: %s found but already active, skipping.\n", ni_boards[i].name); 388 continue; 389 } 390 if (pnp_activate_dev(isapnp_dev) < 0) { 391 pnp_device_detach(isapnp_dev); 392 return -EAGAIN; 393 } 394 if (!pnp_port_valid(isapnp_dev, 0) 395 || !pnp_irq_valid(isapnp_dev, 0)) { 396 pnp_device_detach(isapnp_dev); 397 printk("ni_atmio: pnp invalid port or irq, aborting\n"); 398 return -ENOMEM; 399 } 400 break; 401 } 402 if (i == n_ni_boards) 403 return -ENODEV; 404 *dev = isapnp_dev; 405 return 0; 406} 407 408static int ni_atmio_attach(struct comedi_device *dev, struct comedi_devconfig *it) 409{ 410 struct pnp_dev *isapnp_dev; 411 int ret; 412 unsigned long iobase; 413 int board; 414 unsigned int irq; 415 416 /* allocate private area */ 417 if ((ret = ni_alloc_private(dev)) < 0) 418 return ret; 419 devpriv->stc_writew = &ni_atmio_win_out; 420 devpriv->stc_readw = &ni_atmio_win_in; 421 devpriv->stc_writel = &win_out2; 422 devpriv->stc_readl = &win_in2; 423 424 iobase = it->options[0]; 425 irq = it->options[1]; 426 isapnp_dev = NULL; 427 if (iobase == 0) { 428 ret = ni_isapnp_find_board(&isapnp_dev); 429 if (ret < 0) 430 return ret; 431 432 iobase = pnp_port_start(isapnp_dev, 0); 433 irq = pnp_irq(isapnp_dev, 0); 434 devpriv->isapnp_dev = isapnp_dev; 435 } 436 437 /* reserve our I/O region */ 438 439 printk("comedi%d: ni_atmio: 0x%04lx", dev->minor, iobase); 440 if (!request_region(iobase, NI_SIZE, "ni_atmio")) { 441 printk(" I/O port conflict\n"); 442 return -EIO; 443 } 444 445 dev->iobase = iobase; 446 447#ifdef DEBUG 448 /* board existence sanity check */ 449 { 450 int i; 451 452 printk(" board fingerprint:"); 453 for (i = 0; i < 16; i += 2) { 454 printk(" %04x %02x", inw(dev->iobase + i), 455 inb(dev->iobase + i + 1)); 456 } 457 } 458#endif 459 460 /* get board type */ 461 462 board = ni_getboardtype(dev); 463 if (board < 0) 464 return -EIO; 465 466 dev->board_ptr = ni_boards + board; 467 468 printk(" %s", boardtype.name); 469 dev->board_name = boardtype.name; 470 471 /* irq stuff */ 472 473 if (irq != 0) { 474 if (irq > 15 || ni_irqpin[irq] == -1) { 475 printk(" invalid irq %u\n", irq); 476 return -EINVAL; 477 } 478 printk(" ( irq = %u )", irq); 479 if ((ret = comedi_request_irq(irq, ni_E_interrupt, 480 NI_E_IRQ_FLAGS, "ni_atmio", dev)) < 0) { 481 printk(" irq not available\n"); 482 return -EINVAL; 483 } 484 dev->irq = irq; 485 } 486 487 /* generic E series stuff in ni_mio_common.c */ 488 489 if ((ret = ni_E_init(dev, it)) < 0) { 490 return ret; 491 } 492 493 return 0; 494} 495 496static int ni_getboardtype(struct comedi_device *dev) 497{ 498 int device_id = ni_read_eeprom(dev, 511); 499 int i; 500 501 for (i = 0; i < n_ni_boards; i++) { 502 if (ni_boards[i].device_id == device_id) { 503 return i; 504 } 505 } 506 if (device_id == 255) { 507 printk(" can't find board\n"); 508 } else if (device_id == 0) { 509 printk(" EEPROM read error (?) or device not found\n"); 510 } else { 511 printk(" unknown device ID %d -- contact author\n", device_id); 512 } 513 return -1; 514} 515