usbduxfast.c revision 45f4d0243525b6bc747c946937ced437b135a84d
1/* 2 * Copyright (C) 2004 Bernd Porr, Bernd.Porr@f2s.com 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License as published by 6 * the Free Software Foundation; either version 2 of the License, or 7 * (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 17 */ 18 19/* 20 * I must give credit here to Chris Baugher who 21 * wrote the driver for AT-MIO-16d. I used some parts of this 22 * driver. I also must give credits to David Brownell 23 * who supported me with the USB development. 24 * 25 * Bernd Porr 26 * 27 * 28 * Revision history: 29 * 0.9: Dropping the first data packet which seems to be from the last transfer. 30 * Buffer overflows in the FX2 are handed over to comedi. 31 * 0.92: Dropping now 4 packets. The quad buffer has to be emptied. 32 * Added insn command basically for testing. Sample rate is 33 * 1MHz/16ch=62.5kHz 34 * 0.99: Ian Abbott pointed out a bug which has been corrected. Thanks! 35 * 0.99a: added external trigger. 36 * 1.00: added firmware kernel request to the driver which fixed 37 * udev coldplug problem 38 */ 39 40#include <linux/kernel.h> 41#include <linux/firmware.h> 42#include <linux/module.h> 43#include <linux/init.h> 44#include <linux/slab.h> 45#include <linux/input.h> 46#include <linux/usb.h> 47#include <linux/fcntl.h> 48#include <linux/compiler.h> 49#include "comedi_fc.h" 50#include "../comedidev.h" 51 52#define DRIVER_VERSION "v1.0" 53#define DRIVER_AUTHOR "Bernd Porr, BerndPorr@f2s.com" 54#define DRIVER_DESC "USB-DUXfast, BerndPorr@f2s.com" 55#define BOARDNAME "usbduxfast" 56 57/* 58 * timeout for the USB-transfer 59 */ 60#define EZTIMEOUT 30 61 62/* 63 * constants for "firmware" upload and download 64 */ 65#define USBDUXFASTSUB_FIRMWARE 0xA0 66#define VENDOR_DIR_IN 0xC0 67#define VENDOR_DIR_OUT 0x40 68 69/* 70 * internal addresses of the 8051 processor 71 */ 72#define USBDUXFASTSUB_CPUCS 0xE600 73 74/* 75 * max lenghth of the transfer-buffer for software upload 76 */ 77#define TB_LEN 0x2000 78 79/* 80 * input endpoint number 81 */ 82#define BULKINEP 6 83 84/* 85 * endpoint for the A/D channellist: bulk OUT 86 */ 87#define CHANNELLISTEP 4 88 89/* 90 * number of channels 91 */ 92#define NUMCHANNELS 32 93 94/* 95 * size of the waveform descriptor 96 */ 97#define WAVESIZE 0x20 98 99/* 100 * size of one A/D value 101 */ 102#define SIZEADIN (sizeof(int16_t)) 103 104/* 105 * size of the input-buffer IN BYTES 106 */ 107#define SIZEINBUF 512 108 109/* 110 * 16 bytes 111 */ 112#define SIZEINSNBUF 512 113 114/* 115 * size of the buffer for the dux commands in bytes 116 */ 117#define SIZEOFDUXBUFFER 256 118 119/* 120 * number of in-URBs which receive the data: min=5 121 */ 122#define NUMOFINBUFFERSHIGH 10 123 124/* 125 * total number of usbduxfast devices 126 */ 127#define NUMUSBDUXFAST 16 128 129/* 130 * number of subdevices 131 */ 132#define N_SUBDEVICES 1 133 134/* 135 * analogue in subdevice 136 */ 137#define SUBDEV_AD 0 138 139/* 140 * min delay steps for more than one channel 141 * basically when the mux gives up ;-) 142 * 143 * steps at 30MHz in the FX2 144 */ 145#define MIN_SAMPLING_PERIOD 9 146 147/* 148 * max number of 1/30MHz delay steps 149 */ 150#define MAX_SAMPLING_PERIOD 500 151 152/* 153 * number of received packets to ignore before we start handing data 154 * over to comedi, it's quad buffering and we have to ignore 4 packets 155 */ 156#define PACKETS_TO_IGNORE 4 157 158/* 159 * comedi constants 160 */ 161static const struct comedi_lrange range_usbduxfast_ai_range = { 162 2, {BIP_RANGE(0.75), BIP_RANGE(0.5)} 163}; 164 165/* 166 * private structure of one subdevice 167 * 168 * this is the structure which holds all the data of this driver 169 * one sub device just now: A/D 170 */ 171struct usbduxfastsub_s { 172 int attached; /* is attached? */ 173 int probed; /* is it associated with a subdevice? */ 174 struct usb_device *usbdev; /* pointer to the usb-device */ 175 struct urb *urbIn; /* BULK-transfer handling: urb */ 176 int8_t *transfer_buffer; 177 int16_t *insnBuffer; /* input buffer for single insn */ 178 int ifnum; /* interface number */ 179 struct usb_interface *interface; /* interface structure */ 180 /* comedi device for the interrupt context */ 181 struct comedi_device *comedidev; 182 short int ai_cmd_running; /* asynchronous command is running */ 183 short int ai_continous; /* continous aquisition */ 184 long int ai_sample_count; /* number of samples to acquire */ 185 uint8_t *dux_commands; /* commands */ 186 int ignore; /* counter which ignores the first 187 buffers */ 188 struct semaphore sem; 189}; 190 191/* 192 * The pointer to the private usb-data of the driver 193 * is also the private data for the comedi-device. 194 * This has to be global as the usb subsystem needs 195 * global variables. The other reason is that this 196 * structure must be there _before_ any comedi 197 * command is issued. The usb subsystem must be 198 * initialised before comedi can access it. 199 */ 200static struct usbduxfastsub_s usbduxfastsub[NUMUSBDUXFAST]; 201 202static DEFINE_SEMAPHORE(start_stop_sem); 203 204/* 205 * bulk transfers to usbduxfast 206 */ 207#define SENDADCOMMANDS 0 208#define SENDINITEP6 1 209 210static int send_dux_commands(struct usbduxfastsub_s *udfs, int cmd_type) 211{ 212 int tmp, nsent; 213 214 udfs->dux_commands[0] = cmd_type; 215 216#ifdef CONFIG_COMEDI_DEBUG 217 printk(KERN_DEBUG "comedi%d: usbduxfast: dux_commands: ", 218 udfs->comedidev->minor); 219 for (tmp = 0; tmp < SIZEOFDUXBUFFER; tmp++) 220 printk(" %02x", udfs->dux_commands[tmp]); 221 printk("\n"); 222#endif 223 224 tmp = usb_bulk_msg(udfs->usbdev, 225 usb_sndbulkpipe(udfs->usbdev, CHANNELLISTEP), 226 udfs->dux_commands, SIZEOFDUXBUFFER, &nsent, 10000); 227 if (tmp < 0) 228 printk(KERN_ERR "comedi%d: could not transmit dux_commands to" 229 "the usb-device, err=%d\n", udfs->comedidev->minor, tmp); 230 return tmp; 231} 232 233/* 234 * Stops the data acquision. 235 * It should be safe to call this function from any context. 236 */ 237static int usbduxfastsub_unlink_InURBs(struct usbduxfastsub_s *udfs) 238{ 239 int j = 0; 240 int err = 0; 241 242 if (udfs && udfs->urbIn) { 243 udfs->ai_cmd_running = 0; 244 /* waits until a running transfer is over */ 245 usb_kill_urb(udfs->urbIn); 246 j = 0; 247 } 248#ifdef CONFIG_COMEDI_DEBUG 249 printk(KERN_DEBUG "comedi: usbduxfast: unlinked InURB: res=%d\n", j); 250#endif 251 return err; 252} 253 254/* 255 * This will stop a running acquisition operation. 256 * Is called from within this driver from both the 257 * interrupt context and from comedi. 258 */ 259static int usbduxfast_ai_stop(struct usbduxfastsub_s *udfs, int do_unlink) 260{ 261 int ret = 0; 262 263 if (!udfs) { 264 printk(KERN_ERR "comedi?: usbduxfast_ai_stop: udfs=NULL!\n"); 265 return -EFAULT; 266 } 267#ifdef CONFIG_COMEDI_DEBUG 268 printk(KERN_DEBUG "comedi: usbduxfast_ai_stop\n"); 269#endif 270 271 udfs->ai_cmd_running = 0; 272 273 if (do_unlink) 274 /* stop aquistion */ 275 ret = usbduxfastsub_unlink_InURBs(udfs); 276 277 return ret; 278} 279 280/* 281 * This will cancel a running acquisition operation. 282 * This is called by comedi but never from inside the driver. 283 */ 284static int usbduxfast_ai_cancel(struct comedi_device *dev, 285 struct comedi_subdevice *s) 286{ 287 struct usbduxfastsub_s *udfs; 288 int ret; 289 290 /* force unlink of all urbs */ 291#ifdef CONFIG_COMEDI_DEBUG 292 printk(KERN_DEBUG "comedi: usbduxfast_ai_cancel\n"); 293#endif 294 udfs = dev->private; 295 if (!udfs) { 296 printk(KERN_ERR "comedi: usbduxfast_ai_cancel: udfs=NULL\n"); 297 return -EFAULT; 298 } 299 down(&udfs->sem); 300 if (!udfs->probed) { 301 up(&udfs->sem); 302 return -ENODEV; 303 } 304 /* unlink */ 305 ret = usbduxfast_ai_stop(udfs, 1); 306 up(&udfs->sem); 307 308 return ret; 309} 310 311/* 312 * analogue IN 313 * interrupt service routine 314 */ 315static void usbduxfastsub_ai_Irq(struct urb *urb) 316{ 317 int n, err; 318 struct usbduxfastsub_s *udfs; 319 struct comedi_device *this_comedidev; 320 struct comedi_subdevice *s; 321 uint16_t *p; 322 323 /* sanity checks - is the urb there? */ 324 if (!urb) { 325 printk(KERN_ERR "comedi_: usbduxfast_: ao int-handler called " 326 "with urb=NULL!\n"); 327 return; 328 } 329 /* the context variable points to the subdevice */ 330 this_comedidev = urb->context; 331 if (!this_comedidev) { 332 printk(KERN_ERR "comedi_: usbduxfast_: urb context is a NULL " 333 "pointer!\n"); 334 return; 335 } 336 /* the private structure of the subdevice is usbduxfastsub_s */ 337 udfs = this_comedidev->private; 338 if (!udfs) { 339 printk(KERN_ERR "comedi_: usbduxfast_: private of comedi " 340 "subdev is a NULL pointer!\n"); 341 return; 342 } 343 /* are we running a command? */ 344 if (unlikely(!udfs->ai_cmd_running)) { 345 /* 346 * not running a command 347 * do not continue execution if no asynchronous command 348 * is running in particular not resubmit 349 */ 350 return; 351 } 352 353 if (unlikely(!udfs->attached)) { 354 /* no comedi device there */ 355 return; 356 } 357 /* subdevice which is the AD converter */ 358 s = this_comedidev->subdevices + SUBDEV_AD; 359 360 /* first we test if something unusual has just happened */ 361 switch (urb->status) { 362 case 0: 363 break; 364 365 /* 366 * happens after an unlink command or when the device 367 * is plugged out 368 */ 369 case -ECONNRESET: 370 case -ENOENT: 371 case -ESHUTDOWN: 372 case -ECONNABORTED: 373 /* tell this comedi */ 374 s->async->events |= COMEDI_CB_EOA; 375 s->async->events |= COMEDI_CB_ERROR; 376 comedi_event(udfs->comedidev, s); 377 /* stop the transfer w/o unlink */ 378 usbduxfast_ai_stop(udfs, 0); 379 return; 380 381 default: 382 printk("comedi%d: usbduxfast: non-zero urb status received in " 383 "ai intr context: %d\n", 384 udfs->comedidev->minor, urb->status); 385 s->async->events |= COMEDI_CB_EOA; 386 s->async->events |= COMEDI_CB_ERROR; 387 comedi_event(udfs->comedidev, s); 388 usbduxfast_ai_stop(udfs, 0); 389 return; 390 } 391 392 p = urb->transfer_buffer; 393 if (!udfs->ignore) { 394 if (!udfs->ai_continous) { 395 /* not continous, fixed number of samples */ 396 n = urb->actual_length / sizeof(uint16_t); 397 if (unlikely(udfs->ai_sample_count < n)) { 398 /* 399 * we have send only a fraction of the bytes 400 * received 401 */ 402 cfc_write_array_to_buffer(s, 403 urb->transfer_buffer, 404 udfs->ai_sample_count 405 * sizeof(uint16_t)); 406 usbduxfast_ai_stop(udfs, 0); 407 /* tell comedi that the acquistion is over */ 408 s->async->events |= COMEDI_CB_EOA; 409 comedi_event(udfs->comedidev, s); 410 return; 411 } 412 udfs->ai_sample_count -= n; 413 } 414 /* write the full buffer to comedi */ 415 err = cfc_write_array_to_buffer(s, urb->transfer_buffer, 416 urb->actual_length); 417 if (unlikely(err == 0)) { 418 /* buffer overflow */ 419 usbduxfast_ai_stop(udfs, 0); 420 return; 421 } 422 423 /* tell comedi that data is there */ 424 comedi_event(udfs->comedidev, s); 425 426 } else { 427 /* ignore this packet */ 428 udfs->ignore--; 429 } 430 431 /* 432 * command is still running 433 * resubmit urb for BULK transfer 434 */ 435 urb->dev = udfs->usbdev; 436 urb->status = 0; 437 err = usb_submit_urb(urb, GFP_ATOMIC); 438 if (err < 0) { 439 printk(KERN_ERR "comedi%d: usbduxfast: urb resubm failed: %d", 440 udfs->comedidev->minor, err); 441 s->async->events |= COMEDI_CB_EOA; 442 s->async->events |= COMEDI_CB_ERROR; 443 comedi_event(udfs->comedidev, s); 444 usbduxfast_ai_stop(udfs, 0); 445 } 446} 447 448static int usbduxfastsub_start(struct usbduxfastsub_s *udfs) 449{ 450 int ret; 451 unsigned char local_transfer_buffer[16]; 452 453 /* 7f92 to zero */ 454 local_transfer_buffer[0] = 0; 455 /* bRequest, "Firmware" */ 456 ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, 457 VENDOR_DIR_OUT, /* bmRequestType */ 458 USBDUXFASTSUB_CPUCS, /* Value */ 459 0x0000, /* Index */ 460 /* address of the transfer buffer */ 461 local_transfer_buffer, 462 1, /* Length */ 463 EZTIMEOUT); /* Timeout */ 464 if (ret < 0) { 465 printk("comedi_: usbduxfast_: control msg failed (start)\n"); 466 return ret; 467 } 468 469 return 0; 470} 471 472static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs) 473{ 474 int ret; 475 unsigned char local_transfer_buffer[16]; 476 477 /* 7f92 to one */ 478 local_transfer_buffer[0] = 1; 479 /* bRequest, "Firmware" */ 480 ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, 481 VENDOR_DIR_OUT, /* bmRequestType */ 482 USBDUXFASTSUB_CPUCS, /* Value */ 483 0x0000, /* Index */ 484 local_transfer_buffer, 1, /* Length */ 485 EZTIMEOUT); /* Timeout */ 486 if (ret < 0) { 487 printk(KERN_ERR "comedi_: usbduxfast: control msg failed " 488 "(stop)\n"); 489 return ret; 490 } 491 492 return 0; 493} 494 495static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs, 496 unsigned char *local_transfer_buffer, 497 unsigned int startAddr, unsigned int len) 498{ 499 int ret; 500 501#ifdef CONFIG_COMEDI_DEBUG 502 printk(KERN_DEBUG "comedi: usbduxfast: uploading %d bytes", len); 503 printk(KERN_DEBUG " to addr %d, first byte=%d.\n", 504 startAddr, local_transfer_buffer[0]); 505#endif 506 /* brequest, firmware */ 507 ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0), USBDUXFASTSUB_FIRMWARE, 508 VENDOR_DIR_OUT, /* bmRequestType */ 509 startAddr, /* value */ 510 0x0000, /* index */ 511 /* our local safe buffer */ 512 local_transfer_buffer, 513 len, /* length */ 514 EZTIMEOUT); /* timeout */ 515 516#ifdef CONFIG_COMEDI_DEBUG 517 printk(KERN_DEBUG "comedi_: usbduxfast: result=%d\n", ret); 518#endif 519 520 if (ret < 0) { 521 printk(KERN_ERR "comedi_: usbduxfast: uppload failed\n"); 522 return ret; 523 } 524 525 return 0; 526} 527 528static int usbduxfastsub_submit_InURBs(struct usbduxfastsub_s *udfs) 529{ 530 int ret; 531 532 if (!udfs) 533 return -EFAULT; 534 535 usb_fill_bulk_urb(udfs->urbIn, udfs->usbdev, 536 usb_rcvbulkpipe(udfs->usbdev, BULKINEP), 537 udfs->transfer_buffer, 538 SIZEINBUF, usbduxfastsub_ai_Irq, udfs->comedidev); 539 540#ifdef CONFIG_COMEDI_DEBUG 541 printk(KERN_DEBUG "comedi%d: usbduxfast: submitting in-urb: " 542 "0x%p,0x%p\n", udfs->comedidev->minor, udfs->urbIn->context, 543 udfs->urbIn->dev); 544#endif 545 ret = usb_submit_urb(udfs->urbIn, GFP_ATOMIC); 546 if (ret) { 547 printk(KERN_ERR "comedi_: usbduxfast: ai: usb_submit_urb error" 548 " %d\n", ret); 549 return ret; 550 } 551 return 0; 552} 553 554static int usbduxfast_ai_cmdtest(struct comedi_device *dev, 555 struct comedi_subdevice *s, 556 struct comedi_cmd *cmd) 557{ 558 int err = 0, stop_mask = 0; 559 long int steps, tmp; 560 int minSamplPer; 561 struct usbduxfastsub_s *udfs = dev->private; 562 563 if (!udfs->probed) 564 return -ENODEV; 565 566#ifdef CONFIG_COMEDI_DEBUG 567 printk(KERN_DEBUG "comedi%d: usbduxfast_ai_cmdtest\n", dev->minor); 568 printk(KERN_DEBUG "comedi%d: usbduxfast: convert_arg=%u " 569 "scan_begin_arg=%u\n", 570 dev->minor, cmd->convert_arg, cmd->scan_begin_arg); 571#endif 572 /* step 1: make sure trigger sources are trivially valid */ 573 574 tmp = cmd->start_src; 575 cmd->start_src &= TRIG_NOW | TRIG_EXT | TRIG_INT; 576 if (!cmd->start_src || tmp != cmd->start_src) 577 err++; 578 579 tmp = cmd->scan_begin_src; 580 cmd->scan_begin_src &= TRIG_TIMER | TRIG_FOLLOW | TRIG_EXT; 581 if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) 582 err++; 583 584 tmp = cmd->convert_src; 585 cmd->convert_src &= TRIG_TIMER | TRIG_EXT; 586 if (!cmd->convert_src || tmp != cmd->convert_src) 587 err++; 588 589 tmp = cmd->scan_end_src; 590 cmd->scan_end_src &= TRIG_COUNT; 591 if (!cmd->scan_end_src || tmp != cmd->scan_end_src) 592 err++; 593 594 tmp = cmd->stop_src; 595 stop_mask = TRIG_COUNT | TRIG_NONE; 596 cmd->stop_src &= stop_mask; 597 if (!cmd->stop_src || tmp != cmd->stop_src) 598 err++; 599 600 if (err) 601 return 1; 602 603 /* 604 * step 2: make sure trigger sources are unique and mutually compatible 605 */ 606 607 if (cmd->start_src != TRIG_NOW && 608 cmd->start_src != TRIG_EXT && cmd->start_src != TRIG_INT) 609 err++; 610 if (cmd->scan_begin_src != TRIG_TIMER && 611 cmd->scan_begin_src != TRIG_FOLLOW && 612 cmd->scan_begin_src != TRIG_EXT) 613 err++; 614 if (cmd->convert_src != TRIG_TIMER && cmd->convert_src != TRIG_EXT) 615 err++; 616 if (cmd->stop_src != TRIG_COUNT && 617 cmd->stop_src != TRIG_EXT && cmd->stop_src != TRIG_NONE) 618 err++; 619 620 /* can't have external stop and start triggers at once */ 621 if (cmd->start_src == TRIG_EXT && cmd->stop_src == TRIG_EXT) 622 err++; 623 624 if (err) 625 return 2; 626 627 /* step 3: make sure arguments are trivially compatible */ 628 629 if (cmd->start_src == TRIG_NOW && cmd->start_arg != 0) { 630 cmd->start_arg = 0; 631 err++; 632 } 633 634 if (!cmd->chanlist_len) 635 err++; 636 637 if (cmd->scan_end_arg != cmd->chanlist_len) { 638 cmd->scan_end_arg = cmd->chanlist_len; 639 err++; 640 } 641 642 if (cmd->chanlist_len == 1) 643 minSamplPer = 1; 644 else 645 minSamplPer = MIN_SAMPLING_PERIOD; 646 647 if (cmd->convert_src == TRIG_TIMER) { 648 steps = cmd->convert_arg * 30; 649 if (steps < (minSamplPer * 1000)) 650 steps = minSamplPer * 1000; 651 652 if (steps > (MAX_SAMPLING_PERIOD * 1000)) 653 steps = MAX_SAMPLING_PERIOD * 1000; 654 655 /* calc arg again */ 656 tmp = steps / 30; 657 if (cmd->convert_arg != tmp) { 658 cmd->convert_arg = tmp; 659 err++; 660 } 661 } 662 663 if (cmd->scan_begin_src == TRIG_TIMER) 664 err++; 665 666 /* stop source */ 667 switch (cmd->stop_src) { 668 case TRIG_COUNT: 669 if (!cmd->stop_arg) { 670 cmd->stop_arg = 1; 671 err++; 672 } 673 break; 674 case TRIG_NONE: 675 if (cmd->stop_arg != 0) { 676 cmd->stop_arg = 0; 677 err++; 678 } 679 break; 680 /* 681 * TRIG_EXT doesn't care since it doesn't trigger 682 * off a numbered channel 683 */ 684 default: 685 break; 686 } 687 688 if (err) 689 return 3; 690 691 /* step 4: fix up any arguments */ 692 693 return 0; 694 695} 696 697static int usbduxfast_ai_inttrig(struct comedi_device *dev, 698 struct comedi_subdevice *s, 699 unsigned int trignum) 700{ 701 int ret; 702 struct usbduxfastsub_s *udfs = dev->private; 703 704 if (!udfs) 705 return -EFAULT; 706 707 down(&udfs->sem); 708 if (!udfs->probed) { 709 up(&udfs->sem); 710 return -ENODEV; 711 } 712#ifdef CONFIG_COMEDI_DEBUG 713 printk(KERN_DEBUG "comedi%d: usbduxfast_ai_inttrig\n", dev->minor); 714#endif 715 716 if (trignum != 0) { 717 printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: invalid" 718 " trignum\n", dev->minor); 719 up(&udfs->sem); 720 return -EINVAL; 721 } 722 if (!udfs->ai_cmd_running) { 723 udfs->ai_cmd_running = 1; 724 ret = usbduxfastsub_submit_InURBs(udfs); 725 if (ret < 0) { 726 printk(KERN_ERR "comedi%d: usbduxfast_ai_inttrig: " 727 "urbSubmit: err=%d\n", dev->minor, ret); 728 udfs->ai_cmd_running = 0; 729 up(&udfs->sem); 730 return ret; 731 } 732 s->async->inttrig = NULL; 733 } else { 734 printk(KERN_ERR "comedi%d: ai_inttrig but acqu is already" 735 " running\n", dev->minor); 736 } 737 up(&udfs->sem); 738 return 1; 739} 740 741/* 742 * offsets for the GPIF bytes 743 * the first byte is the command byte 744 */ 745#define LENBASE (1+0x00) 746#define OPBASE (1+0x08) 747#define OUTBASE (1+0x10) 748#define LOGBASE (1+0x18) 749 750static int usbduxfast_ai_cmd(struct comedi_device *dev, 751 struct comedi_subdevice *s) 752{ 753 struct comedi_cmd *cmd = &s->async->cmd; 754 unsigned int chan, gain, rngmask = 0xff; 755 int i, j, ret; 756 struct usbduxfastsub_s *udfs; 757 int result; 758 long steps, steps_tmp; 759 760#ifdef CONFIG_COMEDI_DEBUG 761 printk(KERN_DEBUG "comedi%d: usbduxfast_ai_cmd\n", dev->minor); 762#endif 763 udfs = dev->private; 764 if (!udfs) 765 return -EFAULT; 766 767 down(&udfs->sem); 768 if (!udfs->probed) { 769 up(&udfs->sem); 770 return -ENODEV; 771 } 772 if (udfs->ai_cmd_running) { 773 printk(KERN_ERR "comedi%d: ai_cmd not possible. Another ai_cmd" 774 " is running.\n", dev->minor); 775 up(&udfs->sem); 776 return -EBUSY; 777 } 778 /* set current channel of the running aquisition to zero */ 779 s->async->cur_chan = 0; 780 781 /* 782 * ignore the first buffers from the device if there 783 * is an error condition 784 */ 785 udfs->ignore = PACKETS_TO_IGNORE; 786 787 if (cmd->chanlist_len > 0) { 788 gain = CR_RANGE(cmd->chanlist[0]); 789 for (i = 0; i < cmd->chanlist_len; ++i) { 790 chan = CR_CHAN(cmd->chanlist[i]); 791 if (chan != i) { 792 printk(KERN_ERR "comedi%d: cmd is accepting " 793 "only consecutive channels.\n", 794 dev->minor); 795 up(&udfs->sem); 796 return -EINVAL; 797 } 798 if ((gain != CR_RANGE(cmd->chanlist[i])) 799 && (cmd->chanlist_len > 3)) { 800 printk(KERN_ERR "comedi%d: the gain must be" 801 " the same for all channels.\n", 802 dev->minor); 803 up(&udfs->sem); 804 return -EINVAL; 805 } 806 if (i >= NUMCHANNELS) { 807 printk(KERN_ERR "comedi%d: channel list too" 808 " long\n", dev->minor); 809 break; 810 } 811 } 812 } 813 steps = 0; 814 if (cmd->scan_begin_src == TRIG_TIMER) { 815 printk(KERN_ERR "comedi%d: usbduxfast: " 816 "scan_begin_src==TRIG_TIMER not valid.\n", dev->minor); 817 up(&udfs->sem); 818 return -EINVAL; 819 } 820 if (cmd->convert_src == TRIG_TIMER) 821 steps = (cmd->convert_arg * 30) / 1000; 822 823 if ((steps < MIN_SAMPLING_PERIOD) && (cmd->chanlist_len != 1)) { 824 printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: steps=%ld, " 825 "scan_begin_arg=%d. Not properly tested by cmdtest?\n", 826 dev->minor, steps, cmd->scan_begin_arg); 827 up(&udfs->sem); 828 return -EINVAL; 829 } 830 if (steps > MAX_SAMPLING_PERIOD) { 831 printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: sampling rate " 832 "too low.\n", dev->minor); 833 up(&udfs->sem); 834 return -EINVAL; 835 } 836 if ((cmd->start_src == TRIG_EXT) && (cmd->chanlist_len != 1) 837 && (cmd->chanlist_len != 16)) { 838 printk(KERN_ERR "comedi%d: usbduxfast: ai_cmd: TRIG_EXT only" 839 " with 1 or 16 channels possible.\n", dev->minor); 840 up(&udfs->sem); 841 return -EINVAL; 842 } 843#ifdef CONFIG_COMEDI_DEBUG 844 printk(KERN_DEBUG "comedi%d: usbduxfast: steps=%ld, convert_arg=%u\n", 845 dev->minor, steps, cmd->convert_arg); 846#endif 847 848 switch (cmd->chanlist_len) { 849 case 1: 850 /* 851 * one channel 852 */ 853 854 if (CR_RANGE(cmd->chanlist[0]) > 0) 855 rngmask = 0xff - 0x04; 856 else 857 rngmask = 0xff; 858 859 /* 860 * for external trigger: looping in this state until 861 * the RDY0 pin becomes zero 862 */ 863 864 /* we loop here until ready has been set */ 865 if (cmd->start_src == TRIG_EXT) { 866 /* branch back to state 0 */ 867 udfs->dux_commands[LENBASE + 0] = 0x01; 868 /* deceision state w/o data */ 869 udfs->dux_commands[OPBASE + 0] = 0x01; 870 udfs->dux_commands[OUTBASE + 0] = 0xFF & rngmask; 871 /* RDY0 = 0 */ 872 udfs->dux_commands[LOGBASE + 0] = 0x00; 873 } else { /* we just proceed to state 1 */ 874 udfs->dux_commands[LENBASE + 0] = 1; 875 udfs->dux_commands[OPBASE + 0] = 0; 876 udfs->dux_commands[OUTBASE + 0] = 0xFF & rngmask; 877 udfs->dux_commands[LOGBASE + 0] = 0; 878 } 879 880 if (steps < MIN_SAMPLING_PERIOD) { 881 /* for fast single channel aqu without mux */ 882 if (steps <= 1) { 883 /* 884 * we just stay here at state 1 and rexecute 885 * the same state this gives us 30MHz sampling 886 * rate 887 */ 888 889 /* branch back to state 1 */ 890 udfs->dux_commands[LENBASE + 1] = 0x89; 891 /* deceision state with data */ 892 udfs->dux_commands[OPBASE + 1] = 0x03; 893 udfs->dux_commands[OUTBASE + 1] = 894 0xFF & rngmask; 895 /* doesn't matter */ 896 udfs->dux_commands[LOGBASE + 1] = 0xFF; 897 } else { 898 /* 899 * we loop through two states: data and delay 900 * max rate is 15MHz 901 */ 902 udfs->dux_commands[LENBASE + 1] = steps - 1; 903 /* data */ 904 udfs->dux_commands[OPBASE + 1] = 0x02; 905 udfs->dux_commands[OUTBASE + 1] = 906 0xFF & rngmask; 907 /* doesn't matter */ 908 udfs->dux_commands[LOGBASE + 1] = 0; 909 /* branch back to state 1 */ 910 udfs->dux_commands[LENBASE + 2] = 0x09; 911 /* deceision state w/o data */ 912 udfs->dux_commands[OPBASE + 2] = 0x01; 913 udfs->dux_commands[OUTBASE + 2] = 914 0xFF & rngmask; 915 /* doesn't matter */ 916 udfs->dux_commands[LOGBASE + 2] = 0xFF; 917 } 918 } else { 919 /* 920 * we loop through 3 states: 2x delay and 1x data 921 * this gives a min sampling rate of 60kHz 922 */ 923 924 /* we have 1 state with duration 1 */ 925 steps = steps - 1; 926 927 /* do the first part of the delay */ 928 udfs->dux_commands[LENBASE + 1] = steps / 2; 929 udfs->dux_commands[OPBASE + 1] = 0; 930 udfs->dux_commands[OUTBASE + 1] = 0xFF & rngmask; 931 udfs->dux_commands[LOGBASE + 1] = 0; 932 933 /* and the second part */ 934 udfs->dux_commands[LENBASE + 2] = steps - steps / 2; 935 udfs->dux_commands[OPBASE + 2] = 0; 936 udfs->dux_commands[OUTBASE + 2] = 0xFF & rngmask; 937 udfs->dux_commands[LOGBASE + 2] = 0; 938 939 /* get the data and branch back */ 940 941 /* branch back to state 1 */ 942 udfs->dux_commands[LENBASE + 3] = 0x09; 943 /* deceision state w data */ 944 udfs->dux_commands[OPBASE + 3] = 0x03; 945 udfs->dux_commands[OUTBASE + 3] = 0xFF & rngmask; 946 /* doesn't matter */ 947 udfs->dux_commands[LOGBASE + 3] = 0xFF; 948 } 949 break; 950 951 case 2: 952 /* 953 * two channels 954 * commit data to the FIFO 955 */ 956 957 if (CR_RANGE(cmd->chanlist[0]) > 0) 958 rngmask = 0xff - 0x04; 959 else 960 rngmask = 0xff; 961 962 udfs->dux_commands[LENBASE + 0] = 1; 963 /* data */ 964 udfs->dux_commands[OPBASE + 0] = 0x02; 965 udfs->dux_commands[OUTBASE + 0] = 0xFF & rngmask; 966 udfs->dux_commands[LOGBASE + 0] = 0; 967 968 /* we have 1 state with duration 1: state 0 */ 969 steps_tmp = steps - 1; 970 971 if (CR_RANGE(cmd->chanlist[1]) > 0) 972 rngmask = 0xff - 0x04; 973 else 974 rngmask = 0xff; 975 976 /* do the first part of the delay */ 977 udfs->dux_commands[LENBASE + 1] = steps_tmp / 2; 978 udfs->dux_commands[OPBASE + 1] = 0; 979 /* count */ 980 udfs->dux_commands[OUTBASE + 1] = 0xFE & rngmask; 981 udfs->dux_commands[LOGBASE + 1] = 0; 982 983 /* and the second part */ 984 udfs->dux_commands[LENBASE + 2] = steps_tmp - steps_tmp / 2; 985 udfs->dux_commands[OPBASE + 2] = 0; 986 udfs->dux_commands[OUTBASE + 2] = 0xFF & rngmask; 987 udfs->dux_commands[LOGBASE + 2] = 0; 988 989 udfs->dux_commands[LENBASE + 3] = 1; 990 /* data */ 991 udfs->dux_commands[OPBASE + 3] = 0x02; 992 udfs->dux_commands[OUTBASE + 3] = 0xFF & rngmask; 993 udfs->dux_commands[LOGBASE + 3] = 0; 994 995 /* 996 * we have 2 states with duration 1: step 6 and 997 * the IDLE state 998 */ 999 steps_tmp = steps - 2; 1000 1001 if (CR_RANGE(cmd->chanlist[0]) > 0) 1002 rngmask = 0xff - 0x04; 1003 else 1004 rngmask = 0xff; 1005 1006 /* do the first part of the delay */ 1007 udfs->dux_commands[LENBASE + 4] = steps_tmp / 2; 1008 udfs->dux_commands[OPBASE + 4] = 0; 1009 /* reset */ 1010 udfs->dux_commands[OUTBASE + 4] = (0xFF - 0x02) & rngmask; 1011 udfs->dux_commands[LOGBASE + 4] = 0; 1012 1013 /* and the second part */ 1014 udfs->dux_commands[LENBASE + 5] = steps_tmp - steps_tmp / 2; 1015 udfs->dux_commands[OPBASE + 5] = 0; 1016 udfs->dux_commands[OUTBASE + 5] = 0xFF & rngmask; 1017 udfs->dux_commands[LOGBASE + 5] = 0; 1018 1019 udfs->dux_commands[LENBASE + 6] = 1; 1020 udfs->dux_commands[OPBASE + 6] = 0; 1021 udfs->dux_commands[OUTBASE + 6] = 0xFF & rngmask; 1022 udfs->dux_commands[LOGBASE + 6] = 0; 1023 break; 1024 1025 case 3: 1026 /* 1027 * three channels 1028 */ 1029 for (j = 0; j < 1; j++) { 1030 if (CR_RANGE(cmd->chanlist[j]) > 0) 1031 rngmask = 0xff - 0x04; 1032 else 1033 rngmask = 0xff; 1034 /* 1035 * commit data to the FIFO and do the first part 1036 * of the delay 1037 */ 1038 udfs->dux_commands[LENBASE + j * 2] = steps / 2; 1039 /* data */ 1040 udfs->dux_commands[OPBASE + j * 2] = 0x02; 1041 /* no change */ 1042 udfs->dux_commands[OUTBASE + j * 2] = 0xFF & rngmask; 1043 udfs->dux_commands[LOGBASE + j * 2] = 0; 1044 1045 if (CR_RANGE(cmd->chanlist[j + 1]) > 0) 1046 rngmask = 0xff - 0x04; 1047 else 1048 rngmask = 0xff; 1049 1050 /* do the second part of the delay */ 1051 udfs->dux_commands[LENBASE + j * 2 + 1] = 1052 steps - steps / 2; 1053 /* no data */ 1054 udfs->dux_commands[OPBASE + j * 2 + 1] = 0; 1055 /* count */ 1056 udfs->dux_commands[OUTBASE + j * 2 + 1] = 1057 0xFE & rngmask; 1058 udfs->dux_commands[LOGBASE + j * 2 + 1] = 0; 1059 } 1060 1061 /* 2 steps with duration 1: the idele step and step 6: */ 1062 steps_tmp = steps - 2; 1063 1064 /* commit data to the FIFO and do the first part of the delay */ 1065 udfs->dux_commands[LENBASE + 4] = steps_tmp / 2; 1066 /* data */ 1067 udfs->dux_commands[OPBASE + 4] = 0x02; 1068 udfs->dux_commands[OUTBASE + 4] = 0xFF & rngmask; 1069 udfs->dux_commands[LOGBASE + 4] = 0; 1070 1071 if (CR_RANGE(cmd->chanlist[0]) > 0) 1072 rngmask = 0xff - 0x04; 1073 else 1074 rngmask = 0xff; 1075 1076 /* do the second part of the delay */ 1077 udfs->dux_commands[LENBASE + 5] = steps_tmp - steps_tmp / 2; 1078 /* no data */ 1079 udfs->dux_commands[OPBASE + 5] = 0; 1080 /* reset */ 1081 udfs->dux_commands[OUTBASE + 5] = (0xFF - 0x02) & rngmask; 1082 udfs->dux_commands[LOGBASE + 5] = 0; 1083 1084 udfs->dux_commands[LENBASE + 6] = 1; 1085 udfs->dux_commands[OPBASE + 6] = 0; 1086 udfs->dux_commands[OUTBASE + 6] = 0xFF & rngmask; 1087 udfs->dux_commands[LOGBASE + 6] = 0; 1088 1089 case 16: 1090 if (CR_RANGE(cmd->chanlist[0]) > 0) 1091 rngmask = 0xff - 0x04; 1092 else 1093 rngmask = 0xff; 1094 1095 if (cmd->start_src == TRIG_EXT) { 1096 /* 1097 * we loop here until ready has been set 1098 */ 1099 1100 /* branch back to state 0 */ 1101 udfs->dux_commands[LENBASE + 0] = 0x01; 1102 /* deceision state w/o data */ 1103 udfs->dux_commands[OPBASE + 0] = 0x01; 1104 /* reset */ 1105 udfs->dux_commands[OUTBASE + 0] = 1106 (0xFF - 0x02) & rngmask; 1107 /* RDY0 = 0 */ 1108 udfs->dux_commands[LOGBASE + 0] = 0x00; 1109 } else { 1110 /* 1111 * we just proceed to state 1 1112 */ 1113 1114 /* 30us reset pulse */ 1115 udfs->dux_commands[LENBASE + 0] = 255; 1116 udfs->dux_commands[OPBASE + 0] = 0; 1117 /* reset */ 1118 udfs->dux_commands[OUTBASE + 0] = 1119 (0xFF - 0x02) & rngmask; 1120 udfs->dux_commands[LOGBASE + 0] = 0; 1121 } 1122 1123 /* commit data to the FIFO */ 1124 udfs->dux_commands[LENBASE + 1] = 1; 1125 /* data */ 1126 udfs->dux_commands[OPBASE + 1] = 0x02; 1127 udfs->dux_commands[OUTBASE + 1] = 0xFF & rngmask; 1128 udfs->dux_commands[LOGBASE + 1] = 0; 1129 1130 /* we have 2 states with duration 1 */ 1131 steps = steps - 2; 1132 1133 /* do the first part of the delay */ 1134 udfs->dux_commands[LENBASE + 2] = steps / 2; 1135 udfs->dux_commands[OPBASE + 2] = 0; 1136 udfs->dux_commands[OUTBASE + 2] = 0xFE & rngmask; 1137 udfs->dux_commands[LOGBASE + 2] = 0; 1138 1139 /* and the second part */ 1140 udfs->dux_commands[LENBASE + 3] = steps - steps / 2; 1141 udfs->dux_commands[OPBASE + 3] = 0; 1142 udfs->dux_commands[OUTBASE + 3] = 0xFF & rngmask; 1143 udfs->dux_commands[LOGBASE + 3] = 0; 1144 1145 /* branch back to state 1 */ 1146 udfs->dux_commands[LENBASE + 4] = 0x09; 1147 /* deceision state w/o data */ 1148 udfs->dux_commands[OPBASE + 4] = 0x01; 1149 udfs->dux_commands[OUTBASE + 4] = 0xFF & rngmask; 1150 /* doesn't matter */ 1151 udfs->dux_commands[LOGBASE + 4] = 0xFF; 1152 1153 break; 1154 1155 default: 1156 printk(KERN_ERR "comedi %d: unsupported combination of " 1157 "channels\n", dev->minor); 1158 up(&udfs->sem); 1159 return -EFAULT; 1160 } 1161 1162#ifdef CONFIG_COMEDI_DEBUG 1163 printk(KERN_DEBUG "comedi %d: sending commands to the usb device\n", 1164 dev->minor); 1165#endif 1166 /* 0 means that the AD commands are sent */ 1167 result = send_dux_commands(udfs, SENDADCOMMANDS); 1168 if (result < 0) { 1169 printk(KERN_ERR "comedi%d: adc command could not be submitted." 1170 "Aborting...\n", dev->minor); 1171 up(&udfs->sem); 1172 return result; 1173 } 1174 if (cmd->stop_src == TRIG_COUNT) { 1175 udfs->ai_sample_count = cmd->stop_arg * cmd->scan_end_arg; 1176 if (udfs->ai_sample_count < 1) { 1177 printk(KERN_ERR "comedi%d: " 1178 "(cmd->stop_arg)*(cmd->scan_end_arg)<1, " 1179 "aborting.\n", dev->minor); 1180 up(&udfs->sem); 1181 return -EFAULT; 1182 } 1183 udfs->ai_continous = 0; 1184 } else { 1185 /* continous aquisition */ 1186 udfs->ai_continous = 1; 1187 udfs->ai_sample_count = 0; 1188 } 1189 1190 if ((cmd->start_src == TRIG_NOW) || (cmd->start_src == TRIG_EXT)) { 1191 /* enable this acquisition operation */ 1192 udfs->ai_cmd_running = 1; 1193 ret = usbduxfastsub_submit_InURBs(udfs); 1194 if (ret < 0) { 1195 udfs->ai_cmd_running = 0; 1196 /* fixme: unlink here?? */ 1197 up(&udfs->sem); 1198 return ret; 1199 } 1200 s->async->inttrig = NULL; 1201 } else { 1202 /* 1203 * TRIG_INT 1204 * don't enable the acquision operation 1205 * wait for an internal signal 1206 */ 1207 s->async->inttrig = usbduxfast_ai_inttrig; 1208 } 1209 up(&udfs->sem); 1210 1211 return 0; 1212} 1213 1214/* 1215 * Mode 0 is used to get a single conversion on demand. 1216 */ 1217static int usbduxfast_ai_insn_read(struct comedi_device *dev, 1218 struct comedi_subdevice *s, 1219 struct comedi_insn *insn, unsigned int *data) 1220{ 1221 int i, j, n, actual_length; 1222 int chan, range, rngmask; 1223 int err; 1224 struct usbduxfastsub_s *udfs; 1225 1226 udfs = dev->private; 1227 if (!udfs) { 1228 printk(KERN_ERR "comedi%d: ai_insn_read: no usb dev.\n", 1229 dev->minor); 1230 return -ENODEV; 1231 } 1232#ifdef CONFIG_COMEDI_DEBUG 1233 printk(KERN_DEBUG "comedi%d: ai_insn_read, insn->n=%d, " 1234 "insn->subdev=%d\n", dev->minor, insn->n, insn->subdev); 1235#endif 1236 down(&udfs->sem); 1237 if (!udfs->probed) { 1238 up(&udfs->sem); 1239 return -ENODEV; 1240 } 1241 if (udfs->ai_cmd_running) { 1242 printk(KERN_ERR "comedi%d: ai_insn_read not possible. Async " 1243 "Command is running.\n", dev->minor); 1244 up(&udfs->sem); 1245 return -EBUSY; 1246 } 1247 /* sample one channel */ 1248 chan = CR_CHAN(insn->chanspec); 1249 range = CR_RANGE(insn->chanspec); 1250 /* set command for the first channel */ 1251 1252 if (range > 0) 1253 rngmask = 0xff - 0x04; 1254 else 1255 rngmask = 0xff; 1256 1257 /* commit data to the FIFO */ 1258 udfs->dux_commands[LENBASE + 0] = 1; 1259 /* data */ 1260 udfs->dux_commands[OPBASE + 0] = 0x02; 1261 udfs->dux_commands[OUTBASE + 0] = 0xFF & rngmask; 1262 udfs->dux_commands[LOGBASE + 0] = 0; 1263 1264 /* do the first part of the delay */ 1265 udfs->dux_commands[LENBASE + 1] = 12; 1266 udfs->dux_commands[OPBASE + 1] = 0; 1267 udfs->dux_commands[OUTBASE + 1] = 0xFE & rngmask; 1268 udfs->dux_commands[LOGBASE + 1] = 0; 1269 1270 udfs->dux_commands[LENBASE + 2] = 1; 1271 udfs->dux_commands[OPBASE + 2] = 0; 1272 udfs->dux_commands[OUTBASE + 2] = 0xFE & rngmask; 1273 udfs->dux_commands[LOGBASE + 2] = 0; 1274 1275 udfs->dux_commands[LENBASE + 3] = 1; 1276 udfs->dux_commands[OPBASE + 3] = 0; 1277 udfs->dux_commands[OUTBASE + 3] = 0xFE & rngmask; 1278 udfs->dux_commands[LOGBASE + 3] = 0; 1279 1280 udfs->dux_commands[LENBASE + 4] = 1; 1281 udfs->dux_commands[OPBASE + 4] = 0; 1282 udfs->dux_commands[OUTBASE + 4] = 0xFE & rngmask; 1283 udfs->dux_commands[LOGBASE + 4] = 0; 1284 1285 /* second part */ 1286 udfs->dux_commands[LENBASE + 5] = 12; 1287 udfs->dux_commands[OPBASE + 5] = 0; 1288 udfs->dux_commands[OUTBASE + 5] = 0xFF & rngmask; 1289 udfs->dux_commands[LOGBASE + 5] = 0; 1290 1291 udfs->dux_commands[LENBASE + 6] = 1; 1292 udfs->dux_commands[OPBASE + 6] = 0; 1293 udfs->dux_commands[OUTBASE + 6] = 0xFF & rngmask; 1294 udfs->dux_commands[LOGBASE + 0] = 0; 1295 1296#ifdef CONFIG_COMEDI_DEBUG 1297 printk(KERN_DEBUG "comedi %d: sending commands to the usb device\n", 1298 dev->minor); 1299#endif 1300 /* 0 means that the AD commands are sent */ 1301 err = send_dux_commands(udfs, SENDADCOMMANDS); 1302 if (err < 0) { 1303 printk(KERN_ERR "comedi%d: adc command could not be submitted." 1304 "Aborting...\n", dev->minor); 1305 up(&udfs->sem); 1306 return err; 1307 } 1308#ifdef CONFIG_COMEDI_DEBUG 1309 printk(KERN_DEBUG "comedi%d: usbduxfast: submitting in-urb: " 1310 "0x%p,0x%p\n", udfs->comedidev->minor, udfs->urbIn->context, 1311 udfs->urbIn->dev); 1312#endif 1313 for (i = 0; i < PACKETS_TO_IGNORE; i++) { 1314 err = usb_bulk_msg(udfs->usbdev, 1315 usb_rcvbulkpipe(udfs->usbdev, BULKINEP), 1316 udfs->transfer_buffer, SIZEINBUF, 1317 &actual_length, 10000); 1318 if (err < 0) { 1319 printk(KERN_ERR "comedi%d: insn timeout. No data.\n", 1320 dev->minor); 1321 up(&udfs->sem); 1322 return err; 1323 } 1324 } 1325 /* data points */ 1326 for (i = 0; i < insn->n;) { 1327 err = usb_bulk_msg(udfs->usbdev, 1328 usb_rcvbulkpipe(udfs->usbdev, BULKINEP), 1329 udfs->transfer_buffer, SIZEINBUF, 1330 &actual_length, 10000); 1331 if (err < 0) { 1332 printk(KERN_ERR "comedi%d: insn data error: %d\n", 1333 dev->minor, err); 1334 up(&udfs->sem); 1335 return err; 1336 } 1337 n = actual_length / sizeof(uint16_t); 1338 if ((n % 16) != 0) { 1339 printk(KERN_ERR "comedi%d: insn data packet " 1340 "corrupted.\n", dev->minor); 1341 up(&udfs->sem); 1342 return -EINVAL; 1343 } 1344 for (j = chan; (j < n) && (i < insn->n); j = j + 16) { 1345 data[i] = ((uint16_t *) (udfs->transfer_buffer))[j]; 1346 i++; 1347 } 1348 } 1349 up(&udfs->sem); 1350 return i; 1351} 1352 1353#define FIRMWARE_MAX_LEN 0x2000 1354 1355static int firmwareUpload(struct usbduxfastsub_s *usbduxfastsub, 1356 const u8 *firmwareBinary, int sizeFirmware) 1357{ 1358 int ret; 1359 uint8_t *fwBuf; 1360 1361 if (!firmwareBinary) 1362 return 0; 1363 1364 if (sizeFirmware > FIRMWARE_MAX_LEN) { 1365 dev_err(&usbduxfastsub->interface->dev, 1366 "comedi_: usbduxfast firmware binary it too large for FX2.\n"); 1367 return -ENOMEM; 1368 } 1369 1370 /* we generate a local buffer for the firmware */ 1371 fwBuf = kmemdup(firmwareBinary, sizeFirmware, GFP_KERNEL); 1372 if (!fwBuf) { 1373 dev_err(&usbduxfastsub->interface->dev, 1374 "comedi_: mem alloc for firmware failed\n"); 1375 return -ENOMEM; 1376 } 1377 1378 ret = usbduxfastsub_stop(usbduxfastsub); 1379 if (ret < 0) { 1380 dev_err(&usbduxfastsub->interface->dev, 1381 "comedi_: can not stop firmware\n"); 1382 kfree(fwBuf); 1383 return ret; 1384 } 1385 1386 ret = usbduxfastsub_upload(usbduxfastsub, fwBuf, 0, sizeFirmware); 1387 if (ret < 0) { 1388 dev_err(&usbduxfastsub->interface->dev, 1389 "comedi_: firmware upload failed\n"); 1390 kfree(fwBuf); 1391 return ret; 1392 } 1393 ret = usbduxfastsub_start(usbduxfastsub); 1394 if (ret < 0) { 1395 dev_err(&usbduxfastsub->interface->dev, 1396 "comedi_: can not start firmware\n"); 1397 kfree(fwBuf); 1398 return ret; 1399 } 1400 kfree(fwBuf); 1401 return 0; 1402} 1403 1404static void tidy_up(struct usbduxfastsub_s *udfs) 1405{ 1406#ifdef CONFIG_COMEDI_DEBUG 1407 printk(KERN_DEBUG "comedi_: usbduxfast: tiding up\n"); 1408#endif 1409 1410 if (!udfs) 1411 return; 1412 1413 /* shows the usb subsystem that the driver is down */ 1414 if (udfs->interface) 1415 usb_set_intfdata(udfs->interface, NULL); 1416 1417 udfs->probed = 0; 1418 1419 if (udfs->urbIn) { 1420 /* waits until a running transfer is over */ 1421 usb_kill_urb(udfs->urbIn); 1422 1423 kfree(udfs->transfer_buffer); 1424 udfs->transfer_buffer = NULL; 1425 1426 usb_free_urb(udfs->urbIn); 1427 udfs->urbIn = NULL; 1428 } 1429 1430 kfree(udfs->insnBuffer); 1431 udfs->insnBuffer = NULL; 1432 1433 kfree(udfs->dux_commands); 1434 udfs->dux_commands = NULL; 1435 1436 udfs->ai_cmd_running = 0; 1437} 1438 1439static void usbduxfast_firmware_request_complete_handler(const struct firmware 1440 *fw, void *context) 1441{ 1442 struct usbduxfastsub_s *usbduxfastsub_tmp = context; 1443 struct usb_device *usbdev = usbduxfastsub_tmp->usbdev; 1444 int ret; 1445 1446 if (fw == NULL) 1447 return; 1448 1449 /* 1450 * we need to upload the firmware here because fw will be 1451 * freed once we've left this function 1452 */ 1453 ret = firmwareUpload(usbduxfastsub_tmp, fw->data, fw->size); 1454 1455 if (ret) { 1456 dev_err(&usbdev->dev, 1457 "Could not upload firmware (err=%d)\n", ret); 1458 goto out; 1459 } 1460 1461 comedi_usb_auto_config(usbdev, BOARDNAME); 1462 out: 1463 release_firmware(fw); 1464} 1465 1466/* 1467 * allocate memory for the urbs and initialise them 1468 */ 1469static int usbduxfastsub_probe(struct usb_interface *uinterf, 1470 const struct usb_device_id *id) 1471{ 1472 struct usb_device *udev = interface_to_usbdev(uinterf); 1473 int i; 1474 int index; 1475 int ret; 1476 1477 if (udev->speed != USB_SPEED_HIGH) { 1478 printk(KERN_ERR "comedi_: usbduxfast_: This driver needs" 1479 "USB 2.0 to operate. Aborting...\n"); 1480 return -ENODEV; 1481 } 1482#ifdef CONFIG_COMEDI_DEBUG 1483 printk(KERN_DEBUG "comedi_: usbduxfast_: finding a free structure for " 1484 "the usb-device\n"); 1485#endif 1486 down(&start_stop_sem); 1487 /* look for a free place in the usbduxfast array */ 1488 index = -1; 1489 for (i = 0; i < NUMUSBDUXFAST; i++) { 1490 if (!usbduxfastsub[i].probed) { 1491 index = i; 1492 break; 1493 } 1494 } 1495 1496 /* no more space */ 1497 if (index == -1) { 1498 printk(KERN_ERR "Too many usbduxfast-devices connected.\n"); 1499 up(&start_stop_sem); 1500 return -EMFILE; 1501 } 1502#ifdef CONFIG_COMEDI_DEBUG 1503 printk(KERN_DEBUG "comedi_: usbduxfast: usbduxfastsub[%d] is ready to " 1504 "connect to comedi.\n", index); 1505#endif 1506 1507 sema_init(&(usbduxfastsub[index].sem), 1); 1508 /* save a pointer to the usb device */ 1509 usbduxfastsub[index].usbdev = udev; 1510 1511 /* save the interface itself */ 1512 usbduxfastsub[index].interface = uinterf; 1513 /* get the interface number from the interface */ 1514 usbduxfastsub[index].ifnum = uinterf->altsetting->desc.bInterfaceNumber; 1515 /* 1516 * hand the private data over to the usb subsystem 1517 * will be needed for disconnect 1518 */ 1519 usb_set_intfdata(uinterf, &(usbduxfastsub[index])); 1520 1521#ifdef CONFIG_COMEDI_DEBUG 1522 printk(KERN_DEBUG "comedi_: usbduxfast: ifnum=%d\n", 1523 usbduxfastsub[index].ifnum); 1524#endif 1525 /* create space for the commands going to the usb device */ 1526 usbduxfastsub[index].dux_commands = kmalloc(SIZEOFDUXBUFFER, 1527 GFP_KERNEL); 1528 if (!usbduxfastsub[index].dux_commands) { 1529 printk(KERN_ERR "comedi_: usbduxfast: error alloc space for " 1530 "dac commands\n"); 1531 tidy_up(&(usbduxfastsub[index])); 1532 up(&start_stop_sem); 1533 return -ENOMEM; 1534 } 1535 /* create space of the instruction buffer */ 1536 usbduxfastsub[index].insnBuffer = kmalloc(SIZEINSNBUF, GFP_KERNEL); 1537 if (!usbduxfastsub[index].insnBuffer) { 1538 printk(KERN_ERR "comedi_: usbduxfast: could not alloc space " 1539 "for insnBuffer\n"); 1540 tidy_up(&(usbduxfastsub[index])); 1541 up(&start_stop_sem); 1542 return -ENOMEM; 1543 } 1544 /* setting to alternate setting 1: enabling bulk ep */ 1545 i = usb_set_interface(usbduxfastsub[index].usbdev, 1546 usbduxfastsub[index].ifnum, 1); 1547 if (i < 0) { 1548 printk(KERN_ERR "comedi_: usbduxfast%d: could not switch to " 1549 "alternate setting 1.\n", index); 1550 tidy_up(&(usbduxfastsub[index])); 1551 up(&start_stop_sem); 1552 return -ENODEV; 1553 } 1554 usbduxfastsub[index].urbIn = usb_alloc_urb(0, GFP_KERNEL); 1555 if (!usbduxfastsub[index].urbIn) { 1556 printk(KERN_ERR "comedi_: usbduxfast%d: Could not alloc." 1557 "urb\n", index); 1558 tidy_up(&(usbduxfastsub[index])); 1559 up(&start_stop_sem); 1560 return -ENOMEM; 1561 } 1562 usbduxfastsub[index].transfer_buffer = kmalloc(SIZEINBUF, GFP_KERNEL); 1563 if (!usbduxfastsub[index].transfer_buffer) { 1564 printk(KERN_ERR "comedi_: usbduxfast%d: could not alloc. " 1565 "transb.\n", index); 1566 tidy_up(&(usbduxfastsub[index])); 1567 up(&start_stop_sem); 1568 return -ENOMEM; 1569 } 1570 /* we've reached the bottom of the function */ 1571 usbduxfastsub[index].probed = 1; 1572 up(&start_stop_sem); 1573 1574 ret = request_firmware_nowait(THIS_MODULE, 1575 FW_ACTION_HOTPLUG, 1576 "usbduxfast_firmware.bin", 1577 &udev->dev, 1578 GFP_KERNEL, 1579 usbduxfastsub + index, 1580 usbduxfast_firmware_request_complete_handler); 1581 1582 if (ret) { 1583 dev_err(&udev->dev, "could not load firmware (err=%d)\n", ret); 1584 return ret; 1585 } 1586 1587 printk(KERN_INFO "comedi_: usbduxfast%d has been successfully " 1588 "initialized.\n", index); 1589 /* success */ 1590 return 0; 1591} 1592 1593static void usbduxfastsub_disconnect(struct usb_interface *intf) 1594{ 1595 struct usbduxfastsub_s *udfs = usb_get_intfdata(intf); 1596 struct usb_device *udev = interface_to_usbdev(intf); 1597 1598 if (!udfs) { 1599 printk(KERN_ERR "comedi_: usbduxfast: disconnect called with " 1600 "null pointer.\n"); 1601 return; 1602 } 1603 if (udfs->usbdev != udev) { 1604 printk(KERN_ERR "comedi_: usbduxfast: BUG! called with wrong " 1605 "ptr!!!\n"); 1606 return; 1607 } 1608 1609 comedi_usb_auto_unconfig(udev); 1610 1611 down(&start_stop_sem); 1612 down(&udfs->sem); 1613 tidy_up(udfs); 1614 up(&udfs->sem); 1615 up(&start_stop_sem); 1616 1617#ifdef CONFIG_COMEDI_DEBUG 1618 printk(KERN_DEBUG "comedi_: usbduxfast: disconnected from the usb\n"); 1619#endif 1620} 1621 1622/* 1623 * is called when comedi-config is called 1624 */ 1625static int usbduxfast_attach(struct comedi_device *dev, 1626 struct comedi_devconfig *it) 1627{ 1628 int ret; 1629 int index; 1630 int i; 1631 struct comedi_subdevice *s = NULL; 1632 dev->private = NULL; 1633 1634 down(&start_stop_sem); 1635 /* 1636 * find a valid device which has been detected by the 1637 * probe function of the usb 1638 */ 1639 index = -1; 1640 for (i = 0; i < NUMUSBDUXFAST; i++) { 1641 if (usbduxfastsub[i].probed && !usbduxfastsub[i].attached) { 1642 index = i; 1643 break; 1644 } 1645 } 1646 1647 if (index < 0) { 1648 printk(KERN_ERR "comedi%d: usbduxfast: error: attach failed, " 1649 "no usbduxfast devs connected to the usb bus.\n", 1650 dev->minor); 1651 up(&start_stop_sem); 1652 return -ENODEV; 1653 } 1654 1655 down(&(usbduxfastsub[index].sem)); 1656 /* pointer back to the corresponding comedi device */ 1657 usbduxfastsub[index].comedidev = dev; 1658 1659 /* trying to upload the firmware into the chip */ 1660 if (comedi_aux_data(it->options, 0) && 1661 it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]) { 1662 firmwareUpload(&usbduxfastsub[index], 1663 comedi_aux_data(it->options, 0), 1664 it->options[COMEDI_DEVCONF_AUX_DATA_LENGTH]); 1665 } 1666 1667 dev->board_name = BOARDNAME; 1668 1669 /* set number of subdevices */ 1670 dev->n_subdevices = N_SUBDEVICES; 1671 1672 /* allocate space for the subdevices */ 1673 ret = alloc_subdevices(dev, N_SUBDEVICES); 1674 if (ret < 0) { 1675 printk(KERN_ERR "comedi%d: usbduxfast: error alloc space for " 1676 "subdev\n", dev->minor); 1677 up(&(usbduxfastsub[index].sem)); 1678 up(&start_stop_sem); 1679 return ret; 1680 } 1681 1682 printk(KERN_INFO "comedi%d: usbduxfast: usb-device %d is attached to " 1683 "comedi.\n", dev->minor, index); 1684 /* private structure is also simply the usb-structure */ 1685 dev->private = usbduxfastsub + index; 1686 /* the first subdevice is the A/D converter */ 1687 s = dev->subdevices + SUBDEV_AD; 1688 /* 1689 * the URBs get the comedi subdevice which is responsible for reading 1690 * this is the subdevice which reads data 1691 */ 1692 dev->read_subdev = s; 1693 /* the subdevice receives as private structure the usb-structure */ 1694 s->private = NULL; 1695 /* analog input */ 1696 s->type = COMEDI_SUBD_AI; 1697 /* readable and ref is to ground */ 1698 s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; 1699 /* 16 channels */ 1700 s->n_chan = 16; 1701 /* length of the channellist */ 1702 s->len_chanlist = 16; 1703 /* callback functions */ 1704 s->insn_read = usbduxfast_ai_insn_read; 1705 s->do_cmdtest = usbduxfast_ai_cmdtest; 1706 s->do_cmd = usbduxfast_ai_cmd; 1707 s->cancel = usbduxfast_ai_cancel; 1708 /* max value from the A/D converter (12bit+1 bit for overflow) */ 1709 s->maxdata = 0x1000; 1710 /* range table to convert to physical units */ 1711 s->range_table = &range_usbduxfast_ai_range; 1712 1713 /* finally decide that it's attached */ 1714 usbduxfastsub[index].attached = 1; 1715 1716 up(&(usbduxfastsub[index].sem)); 1717 up(&start_stop_sem); 1718 printk(KERN_INFO "comedi%d: successfully attached to usbduxfast.\n", 1719 dev->minor); 1720 1721 return 0; 1722} 1723 1724static int usbduxfast_detach(struct comedi_device *dev) 1725{ 1726 struct usbduxfastsub_s *udfs; 1727 1728 if (!dev) { 1729 printk(KERN_ERR "comedi?: usbduxfast: detach without dev " 1730 "variable...\n"); 1731 return -EFAULT; 1732 } 1733#ifdef CONFIG_COMEDI_DEBUG 1734 printk(KERN_DEBUG "comedi%d: usbduxfast: detach usb device\n", 1735 dev->minor); 1736#endif 1737 1738 udfs = dev->private; 1739 if (!udfs) { 1740 printk(KERN_ERR "comedi?: usbduxfast: detach without ptr to " 1741 "usbduxfastsub[]\n"); 1742 return -EFAULT; 1743 } 1744 1745 down(&udfs->sem); 1746 down(&start_stop_sem); 1747 /* 1748 * Don't allow detach to free the private structure 1749 * It's one entry of of usbduxfastsub[] 1750 */ 1751 dev->private = NULL; 1752 udfs->attached = 0; 1753 udfs->comedidev = NULL; 1754#ifdef CONFIG_COMEDI_DEBUG 1755 printk(KERN_DEBUG "comedi%d: usbduxfast: detach: successfully " 1756 "removed\n", dev->minor); 1757#endif 1758 up(&start_stop_sem); 1759 up(&udfs->sem); 1760 return 0; 1761} 1762 1763/* 1764 * main driver struct 1765 */ 1766static struct comedi_driver driver_usbduxfast = { 1767 .driver_name = "usbduxfast", 1768 .module = THIS_MODULE, 1769 .attach = usbduxfast_attach, 1770 .detach = usbduxfast_detach 1771}; 1772 1773/* 1774 * Table with the USB-devices: just now only testing IDs 1775 */ 1776static const struct usb_device_id usbduxfastsub_table[] = { 1777 /* { USB_DEVICE(0x4b4, 0x8613) }, testing */ 1778 {USB_DEVICE(0x13d8, 0x0010)}, /* real ID */ 1779 {USB_DEVICE(0x13d8, 0x0011)}, /* real ID */ 1780 {} /* Terminating entry */ 1781}; 1782 1783MODULE_DEVICE_TABLE(usb, usbduxfastsub_table); 1784 1785/* 1786 * The usbduxfastsub-driver 1787 */ 1788static struct usb_driver usbduxfastsub_driver = { 1789#ifdef COMEDI_HAVE_USB_DRIVER_OWNER 1790 .owner = THIS_MODULE, 1791#endif 1792 .name = BOARDNAME, 1793 .probe = usbduxfastsub_probe, 1794 .disconnect = usbduxfastsub_disconnect, 1795 .id_table = usbduxfastsub_table 1796}; 1797 1798/* 1799 * Can't use the nice macro as I have also to initialise the USB subsystem: 1800 * registering the usb-system _and_ the comedi-driver 1801 */ 1802static int __init init_usbduxfast(void) 1803{ 1804 printk(KERN_INFO 1805 KBUILD_MODNAME ": " DRIVER_VERSION ":" DRIVER_DESC "\n"); 1806 usb_register(&usbduxfastsub_driver); 1807 comedi_driver_register(&driver_usbduxfast); 1808 return 0; 1809} 1810 1811/* 1812 * deregistering the comedi driver and the usb-subsystem 1813 */ 1814static void __exit exit_usbduxfast(void) 1815{ 1816 comedi_driver_unregister(&driver_usbduxfast); 1817 usb_deregister(&usbduxfastsub_driver); 1818} 1819 1820module_init(init_usbduxfast); 1821module_exit(exit_usbduxfast); 1822 1823MODULE_AUTHOR(DRIVER_AUTHOR); 1824MODULE_DESCRIPTION(DRIVER_DESC); 1825MODULE_LICENSE("GPL"); 1826