1/* Driver for Microtek Scanmaker X6 USB scanner, and possibly others. 2 * 3 * (C) Copyright 2000 John Fremlin <vii@penguinpowered.com> 4 * (C) Copyright 2000 Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de> 5 * 6 * Parts shamelessly stolen from usb-storage and copyright by their 7 * authors. Thanks to Matt Dharm for giving us permission! 8 * 9 * This driver implements a SCSI host controller driver and a USB 10 * device driver. To avoid confusion, all the USB related stuff is 11 * prefixed by mts_usb_ and all the SCSI stuff by mts_scsi_. 12 * 13 * Microtek (www.microtek.com) did not release the specifications for 14 * their USB protocol to us, so we had to reverse engineer them. We 15 * don't know for which models they are valid. 16 * 17 * The X6 USB has three bulk endpoints, one output (0x1) down which 18 * commands and outgoing data are sent, and two input: 0x82 from which 19 * normal data is read from the scanner (in packets of maximum 32 20 * bytes) and from which the status byte is read, and 0x83 from which 21 * the results of a scan (or preview) are read in up to 64 * 1024 byte 22 * chunks by the Windows driver. We don't know how much it is possible 23 * to read at a time from 0x83. 24 * 25 * It seems possible to read (with URB transfers) everything from 0x82 26 * in one go, without bothering to read in 32 byte chunks. 27 * 28 * There seems to be an optimisation of a further READ implicit if 29 * you simply read from 0x83. 30 * 31 * Guessed protocol: 32 * 33 * Send raw SCSI command to EP 0x1 34 * 35 * If there is data to receive: 36 * If the command was READ datatype=image: 37 * Read a lot of data from EP 0x83 38 * Else: 39 * Read data from EP 0x82 40 * Else: 41 * If there is data to transmit: 42 * Write it to EP 0x1 43 * 44 * Read status byte from EP 0x82 45 * 46 * References: 47 * 48 * The SCSI command set for the scanner is available from 49 * ftp://ftp.microtek.com/microtek/devpack/ 50 * 51 * Microtek NV sent us a more up to date version of the document. If 52 * you want it, just send mail. 53 * 54 * Status: 55 * 56 * Untested with multiple scanners. 57 * Untested on SMP. 58 * Untested on a bigendian machine. 59 * 60 * History: 61 * 62 * 20000417 starting history 63 * 20000417 fixed load oops 64 * 20000417 fixed unload oops 65 * 20000419 fixed READ IMAGE detection 66 * 20000424 started conversion to use URBs 67 * 20000502 handled short transfers as errors 68 * 20000513 rename and organisation of functions (john) 69 * 20000513 added IDs for all products supported by Windows driver (john) 70 * 20000514 Rewrote mts_scsi_queuecommand to use URBs (john) 71 * 20000514 Version 0.0.8j 72 * 20000514 Fix reporting of non-existent devices to SCSI layer (john) 73 * 20000514 Added MTS_DEBUG_INT (john) 74 * 20000514 Changed "usb-microtek" to "microtek" for consistency (john) 75 * 20000514 Stupid bug fixes (john) 76 * 20000514 Version 0.0.9j 77 * 20000515 Put transfer context and URB in mts_desc (john) 78 * 20000515 Added prelim turn off debugging support (john) 79 * 20000515 Version 0.0.10j 80 * 20000515 Fixed up URB allocation (clear URB on alloc) (john) 81 * 20000515 Version 0.0.11j 82 * 20000516 Removed unnecessary spinlock in mts_transfer_context (john) 83 * 20000516 Removed unnecessary up on instance lock in mts_remove_nolock (john) 84 * 20000516 Implemented (badly) scsi_abort (john) 85 * 20000516 Version 0.0.12j 86 * 20000517 Hopefully removed mts_remove_nolock quasideadlock (john) 87 * 20000517 Added mts_debug_dump to print ll USB info (john) 88 * 20000518 Tweaks and documentation updates (john) 89 * 20000518 Version 0.0.13j 90 * 20000518 Cleaned up abort handling (john) 91 * 20000523 Removed scsi_command and various scsi_..._resets (john) 92 * 20000523 Added unlink URB on scsi_abort, now OHCI supports it (john) 93 * 20000523 Fixed last tiresome compile warning (john) 94 * 20000523 Version 0.0.14j (though version 0.1 has come out?) 95 * 20000602 Added primitive reset 96 * 20000602 Version 0.2.0 97 * 20000603 various cosmetic changes 98 * 20000603 Version 0.2.1 99 * 20000620 minor cosmetic changes 100 * 20000620 Version 0.2.2 101 * 20000822 Hopefully fixed deadlock in mts_remove_nolock() 102 * 20000822 Fixed minor race in mts_transfer_cleanup() 103 * 20000822 Fixed deadlock on submission error in queuecommand 104 * 20000822 Version 0.2.3 105 * 20000913 Reduced module size if debugging is off 106 * 20000913 Version 0.2.4 107 * 20010210 New abort logic 108 * 20010210 Version 0.3.0 109 * 20010217 Merged scatter/gather 110 * 20010218 Version 0.4.0 111 * 20010218 Cosmetic fixes 112 * 20010218 Version 0.4.1 113 * 20010306 Abort while using scatter/gather 114 * 20010306 Version 0.4.2 115 * 20010311 Remove all timeouts and tidy up generally (john) 116 * 20010320 check return value of scsi_register() 117 * 20010320 Version 0.4.3 118 * 20010408 Identify version on module load. 119 * 20011003 Fix multiple requests 120 */ 121 122#include <linux/module.h> 123#include <linux/kernel.h> 124#include <linux/signal.h> 125#include <linux/errno.h> 126#include <linux/random.h> 127#include <linux/poll.h> 128#include <linux/init.h> 129#include <linux/slab.h> 130#include <linux/spinlock.h> 131#include <linux/usb.h> 132#include <linux/proc_fs.h> 133 134#include <linux/atomic.h> 135#include <linux/blkdev.h> 136#include "../../scsi/scsi.h" 137#include <scsi/scsi_host.h> 138 139#include "microtek.h" 140 141/* 142 * Version Information 143 */ 144#define DRIVER_VERSION "v0.4.3" 145#define DRIVER_AUTHOR "John Fremlin <vii@penguinpowered.com>, Oliver Neukum <Oliver.Neukum@lrz.uni-muenchen.de>" 146#define DRIVER_DESC "Microtek Scanmaker X6 USB scanner driver" 147 148/* Should we do debugging? */ 149 150//#define MTS_DO_DEBUG 151 152/* USB layer driver interface */ 153 154static int mts_usb_probe(struct usb_interface *intf, 155 const struct usb_device_id *id); 156static void mts_usb_disconnect(struct usb_interface *intf); 157 158static const struct usb_device_id mts_usb_ids[]; 159 160static struct usb_driver mts_usb_driver = { 161 .name = "microtekX6", 162 .probe = mts_usb_probe, 163 .disconnect = mts_usb_disconnect, 164 .id_table = mts_usb_ids, 165}; 166 167 168/* Internal driver stuff */ 169 170#define MTS_VERSION "0.4.3" 171#define MTS_NAME "microtek usb (rev " MTS_VERSION "): " 172 173#define MTS_WARNING(x...) \ 174 printk( KERN_WARNING MTS_NAME x ) 175#define MTS_ERROR(x...) \ 176 printk( KERN_ERR MTS_NAME x ) 177#define MTS_INT_ERROR(x...) \ 178 MTS_ERROR(x) 179#define MTS_MESSAGE(x...) \ 180 printk( KERN_INFO MTS_NAME x ) 181 182#if defined MTS_DO_DEBUG 183 184#define MTS_DEBUG(x...) \ 185 printk( KERN_DEBUG MTS_NAME x ) 186 187#define MTS_DEBUG_GOT_HERE() \ 188 MTS_DEBUG("got to %s:%d (%s)\n", __FILE__, (int)__LINE__, __func__ ) 189#define MTS_DEBUG_INT() \ 190 do { MTS_DEBUG_GOT_HERE(); \ 191 MTS_DEBUG("transfer = 0x%x context = 0x%x\n",(int)transfer,(int)context ); \ 192 MTS_DEBUG("status = 0x%x data-length = 0x%x sent = 0x%x\n",transfer->status,(int)context->data_length, (int)transfer->actual_length ); \ 193 mts_debug_dump(context->instance);\ 194 } while(0) 195#else 196 197#define MTS_NUL_STATEMENT do { } while(0) 198 199#define MTS_DEBUG(x...) MTS_NUL_STATEMENT 200#define MTS_DEBUG_GOT_HERE() MTS_NUL_STATEMENT 201#define MTS_DEBUG_INT() MTS_NUL_STATEMENT 202 203#endif 204 205 206 207#define MTS_INT_INIT()\ 208 struct mts_transfer_context* context = (struct mts_transfer_context*)transfer->context; \ 209 MTS_DEBUG_INT();\ 210 211#ifdef MTS_DO_DEBUG 212 213static inline void mts_debug_dump(struct mts_desc* desc) { 214 MTS_DEBUG("desc at 0x%x: toggle = %02x%02x\n", 215 (int)desc, 216 (int)desc->usb_dev->toggle[1],(int)desc->usb_dev->toggle[0] 217 ); 218 MTS_DEBUG("ep_out=%x ep_response=%x ep_image=%x\n", 219 usb_sndbulkpipe(desc->usb_dev,desc->ep_out), 220 usb_rcvbulkpipe(desc->usb_dev,desc->ep_response), 221 usb_rcvbulkpipe(desc->usb_dev,desc->ep_image) 222 ); 223} 224 225 226static inline void mts_show_command(struct scsi_cmnd *srb) 227{ 228 char *what = NULL; 229 230 switch (srb->cmnd[0]) { 231 case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break; 232 case REZERO_UNIT: what = "REZERO_UNIT"; break; 233 case REQUEST_SENSE: what = "REQUEST_SENSE"; break; 234 case FORMAT_UNIT: what = "FORMAT_UNIT"; break; 235 case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break; 236 case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break; 237 case READ_6: what = "READ_6"; break; 238 case WRITE_6: what = "WRITE_6"; break; 239 case SEEK_6: what = "SEEK_6"; break; 240 case READ_REVERSE: what = "READ_REVERSE"; break; 241 case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break; 242 case SPACE: what = "SPACE"; break; 243 case INQUIRY: what = "INQUIRY"; break; 244 case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break; 245 case MODE_SELECT: what = "MODE_SELECT"; break; 246 case RESERVE: what = "RESERVE"; break; 247 case RELEASE: what = "RELEASE"; break; 248 case COPY: what = "COPY"; break; 249 case ERASE: what = "ERASE"; break; 250 case MODE_SENSE: what = "MODE_SENSE"; break; 251 case START_STOP: what = "START_STOP"; break; 252 case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break; 253 case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break; 254 case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break; 255 case SET_WINDOW: what = "SET_WINDOW"; break; 256 case READ_CAPACITY: what = "READ_CAPACITY"; break; 257 case READ_10: what = "READ_10"; break; 258 case WRITE_10: what = "WRITE_10"; break; 259 case SEEK_10: what = "SEEK_10"; break; 260 case WRITE_VERIFY: what = "WRITE_VERIFY"; break; 261 case VERIFY: what = "VERIFY"; break; 262 case SEARCH_HIGH: what = "SEARCH_HIGH"; break; 263 case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break; 264 case SEARCH_LOW: what = "SEARCH_LOW"; break; 265 case SET_LIMITS: what = "SET_LIMITS"; break; 266 case READ_POSITION: what = "READ_POSITION"; break; 267 case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break; 268 case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break; 269 case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break; 270 case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break; 271 case COMPARE: what = "COMPARE"; break; 272 case COPY_VERIFY: what = "COPY_VERIFY"; break; 273 case WRITE_BUFFER: what = "WRITE_BUFFER"; break; 274 case READ_BUFFER: what = "READ_BUFFER"; break; 275 case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break; 276 case READ_LONG: what = "READ_LONG"; break; 277 case WRITE_LONG: what = "WRITE_LONG"; break; 278 case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break; 279 case WRITE_SAME: what = "WRITE_SAME"; break; 280 case READ_TOC: what = "READ_TOC"; break; 281 case LOG_SELECT: what = "LOG_SELECT"; break; 282 case LOG_SENSE: what = "LOG_SENSE"; break; 283 case MODE_SELECT_10: what = "MODE_SELECT_10"; break; 284 case MODE_SENSE_10: what = "MODE_SENSE_10"; break; 285 case MOVE_MEDIUM: what = "MOVE_MEDIUM"; break; 286 case READ_12: what = "READ_12"; break; 287 case WRITE_12: what = "WRITE_12"; break; 288 case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break; 289 case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break; 290 case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break; 291 case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break; 292 case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break; 293 case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break; 294 case WRITE_LONG_2: what = "WRITE_LONG_2"; break; 295 default: 296 MTS_DEBUG("can't decode command\n"); 297 goto out; 298 break; 299 } 300 MTS_DEBUG( "Command %s (%d bytes)\n", what, srb->cmd_len); 301 302 out: 303 MTS_DEBUG( " %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", 304 srb->cmnd[0], srb->cmnd[1], srb->cmnd[2], srb->cmnd[3], srb->cmnd[4], srb->cmnd[5], 305 srb->cmnd[6], srb->cmnd[7], srb->cmnd[8], srb->cmnd[9]); 306} 307 308#else 309 310static inline void mts_show_command(struct scsi_cmnd * dummy) 311{ 312} 313 314static inline void mts_debug_dump(struct mts_desc* dummy) 315{ 316} 317 318#endif 319 320static inline void mts_urb_abort(struct mts_desc* desc) { 321 MTS_DEBUG_GOT_HERE(); 322 mts_debug_dump(desc); 323 324 usb_kill_urb( desc->urb ); 325} 326 327static int mts_slave_alloc (struct scsi_device *s) 328{ 329 s->inquiry_len = 0x24; 330 return 0; 331} 332 333static int mts_slave_configure (struct scsi_device *s) 334{ 335 blk_queue_dma_alignment(s->request_queue, (512 - 1)); 336 return 0; 337} 338 339static int mts_scsi_abort(struct scsi_cmnd *srb) 340{ 341 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 342 343 MTS_DEBUG_GOT_HERE(); 344 345 mts_urb_abort(desc); 346 347 return FAILED; 348} 349 350static int mts_scsi_host_reset(struct scsi_cmnd *srb) 351{ 352 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 353 int result; 354 355 MTS_DEBUG_GOT_HERE(); 356 mts_debug_dump(desc); 357 358 result = usb_lock_device_for_reset(desc->usb_dev, desc->usb_intf); 359 if (result == 0) { 360 result = usb_reset_device(desc->usb_dev); 361 usb_unlock_device(desc->usb_dev); 362 } 363 return result ? FAILED : SUCCESS; 364} 365 366static int 367mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb); 368 369static void mts_transfer_cleanup( struct urb *transfer ); 370static void mts_do_sg(struct urb * transfer); 371 372static inline 373void mts_int_submit_urb (struct urb* transfer, 374 int pipe, 375 void* data, 376 unsigned length, 377 usb_complete_t callback ) 378/* Interrupt context! */ 379 380/* Holding transfer->context->lock! */ 381{ 382 int res; 383 384 MTS_INT_INIT(); 385 386 usb_fill_bulk_urb(transfer, 387 context->instance->usb_dev, 388 pipe, 389 data, 390 length, 391 callback, 392 context 393 ); 394 395 res = usb_submit_urb( transfer, GFP_ATOMIC ); 396 if ( unlikely(res) ) { 397 MTS_INT_ERROR( "could not submit URB! Error was %d\n",(int)res ); 398 context->srb->result = DID_ERROR << 16; 399 mts_transfer_cleanup(transfer); 400 } 401} 402 403 404static void mts_transfer_cleanup( struct urb *transfer ) 405/* Interrupt context! */ 406{ 407 MTS_INT_INIT(); 408 409 if ( likely(context->final_callback != NULL) ) 410 context->final_callback(context->srb); 411} 412 413static void mts_transfer_done( struct urb *transfer ) 414{ 415 MTS_INT_INIT(); 416 417 context->srb->result &= MTS_SCSI_ERR_MASK; 418 context->srb->result |= (unsigned)(*context->scsi_status)<<1; 419 420 mts_transfer_cleanup(transfer); 421} 422 423 424static void mts_get_status( struct urb *transfer ) 425/* Interrupt context! */ 426{ 427 MTS_INT_INIT(); 428 429 mts_int_submit_urb(transfer, 430 usb_rcvbulkpipe(context->instance->usb_dev, 431 context->instance->ep_response), 432 context->scsi_status, 433 1, 434 mts_transfer_done ); 435} 436 437static void mts_data_done( struct urb* transfer ) 438/* Interrupt context! */ 439{ 440 int status = transfer->status; 441 MTS_INT_INIT(); 442 443 if ( context->data_length != transfer->actual_length ) { 444 scsi_set_resid(context->srb, context->data_length - 445 transfer->actual_length); 446 } else if ( unlikely(status) ) { 447 context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; 448 } 449 450 mts_get_status(transfer); 451} 452 453 454static void mts_command_done( struct urb *transfer ) 455/* Interrupt context! */ 456{ 457 int status = transfer->status; 458 MTS_INT_INIT(); 459 460 if ( unlikely(status) ) { 461 if (status == -ENOENT) { 462 /* We are being killed */ 463 MTS_DEBUG_GOT_HERE(); 464 context->srb->result = DID_ABORT<<16; 465 } else { 466 /* A genuine error has occurred */ 467 MTS_DEBUG_GOT_HERE(); 468 469 context->srb->result = DID_ERROR<<16; 470 } 471 mts_transfer_cleanup(transfer); 472 473 return; 474 } 475 476 if (context->srb->cmnd[0] == REQUEST_SENSE) { 477 mts_int_submit_urb(transfer, 478 context->data_pipe, 479 context->srb->sense_buffer, 480 context->data_length, 481 mts_data_done); 482 } else { if ( context->data ) { 483 mts_int_submit_urb(transfer, 484 context->data_pipe, 485 context->data, 486 context->data_length, 487 scsi_sg_count(context->srb) > 1 ? 488 mts_do_sg : mts_data_done); 489 } else { 490 mts_get_status(transfer); 491 } 492 } 493} 494 495static void mts_do_sg (struct urb* transfer) 496{ 497 struct scatterlist * sg; 498 int status = transfer->status; 499 MTS_INT_INIT(); 500 501 MTS_DEBUG("Processing fragment %d of %d\n", context->fragment, 502 scsi_sg_count(context->srb)); 503 504 if (unlikely(status)) { 505 context->srb->result = (status == -ENOENT ? DID_ABORT : DID_ERROR)<<16; 506 mts_transfer_cleanup(transfer); 507 } 508 509 sg = scsi_sglist(context->srb); 510 context->fragment++; 511 mts_int_submit_urb(transfer, 512 context->data_pipe, 513 sg_virt(&sg[context->fragment]), 514 sg[context->fragment].length, 515 context->fragment + 1 == scsi_sg_count(context->srb) ? 516 mts_data_done : mts_do_sg); 517} 518 519static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 }; 520static const u8 mts_read_image_sig_len = 4; 521static const unsigned char mts_direction[256/8] = { 522 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, 523 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, 524 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, 525 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 526}; 527 528 529#define MTS_DIRECTION_IS_IN(x) ((mts_direction[x>>3] >> (x & 7)) & 1) 530 531static void 532mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc) 533{ 534 int pipe; 535 struct scatterlist * sg; 536 537 MTS_DEBUG_GOT_HERE(); 538 539 desc->context.instance = desc; 540 desc->context.srb = srb; 541 desc->context.fragment = 0; 542 543 if (!scsi_bufflen(srb)) { 544 desc->context.data = NULL; 545 desc->context.data_length = 0; 546 return; 547 } else { 548 sg = scsi_sglist(srb); 549 desc->context.data = sg_virt(&sg[0]); 550 desc->context.data_length = sg[0].length; 551 } 552 553 554 /* can't rely on srb->sc_data_direction */ 555 556 /* Brutally ripped from usb-storage */ 557 558 if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len ) 559) { pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image); 560 MTS_DEBUG( "transferring from desc->ep_image == %d\n", 561 (int)desc->ep_image ); 562 } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) { 563 pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response); 564 MTS_DEBUG( "transferring from desc->ep_response == %d\n", 565 (int)desc->ep_response); 566 } else { 567 MTS_DEBUG("transferring to desc->ep_out == %d\n", 568 (int)desc->ep_out); 569 pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out); 570 } 571 desc->context.data_pipe = pipe; 572} 573 574 575static int 576mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback) 577{ 578 struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]); 579 int err = 0; 580 int res; 581 582 MTS_DEBUG_GOT_HERE(); 583 mts_show_command(srb); 584 mts_debug_dump(desc); 585 586 if ( srb->device->lun || srb->device->id || srb->device->channel ) { 587 588 MTS_DEBUG("Command to LUN=%d ID=%d CHANNEL=%d from SCSI layer\n",(int)srb->device->lun,(int)srb->device->id, (int)srb->device->channel ); 589 590 MTS_DEBUG("this device doesn't exist\n"); 591 592 srb->result = DID_BAD_TARGET << 16; 593 594 if(likely(callback != NULL)) 595 callback(srb); 596 597 goto out; 598 } 599 600 601 usb_fill_bulk_urb(desc->urb, 602 desc->usb_dev, 603 usb_sndbulkpipe(desc->usb_dev,desc->ep_out), 604 srb->cmnd, 605 srb->cmd_len, 606 mts_command_done, 607 &desc->context 608 ); 609 610 611 mts_build_transfer_context( srb, desc ); 612 desc->context.final_callback = callback; 613 614 /* here we need ATOMIC as we are called with the iolock */ 615 res=usb_submit_urb(desc->urb, GFP_ATOMIC); 616 617 if(unlikely(res)){ 618 MTS_ERROR("error %d submitting URB\n",(int)res); 619 srb->result = DID_ERROR << 16; 620 621 if(likely(callback != NULL)) 622 callback(srb); 623 624 } 625out: 626 return err; 627} 628 629static DEF_SCSI_QCMD(mts_scsi_queuecommand) 630 631static struct scsi_host_template mts_scsi_host_template = { 632 .module = THIS_MODULE, 633 .name = "microtekX6", 634 .proc_name = "microtekX6", 635 .queuecommand = mts_scsi_queuecommand, 636 .eh_abort_handler = mts_scsi_abort, 637 .eh_host_reset_handler = mts_scsi_host_reset, 638 .sg_tablesize = SG_ALL, 639 .can_queue = 1, 640 .this_id = -1, 641 .cmd_per_lun = 1, 642 .use_clustering = 1, 643 .emulated = 1, 644 .slave_alloc = mts_slave_alloc, 645 .slave_configure = mts_slave_configure, 646 .max_sectors= 256, /* 128 K */ 647}; 648 649/* The entries of microtek_table must correspond, line-by-line to 650 the entries of mts_supported_products[]. */ 651 652static const struct usb_device_id mts_usb_ids[] = 653{ 654 { USB_DEVICE(0x4ce, 0x0300) }, 655 { USB_DEVICE(0x5da, 0x0094) }, 656 { USB_DEVICE(0x5da, 0x0099) }, 657 { USB_DEVICE(0x5da, 0x009a) }, 658 { USB_DEVICE(0x5da, 0x00a0) }, 659 { USB_DEVICE(0x5da, 0x00a3) }, 660 { USB_DEVICE(0x5da, 0x80a3) }, 661 { USB_DEVICE(0x5da, 0x80ac) }, 662 { USB_DEVICE(0x5da, 0x00b6) }, 663 { } /* Terminating entry */ 664}; 665 666MODULE_DEVICE_TABLE (usb, mts_usb_ids); 667 668 669static int mts_usb_probe(struct usb_interface *intf, 670 const struct usb_device_id *id) 671{ 672 int i; 673 int ep_out = -1; 674 int ep_in_set[3]; /* this will break if we have more than three endpoints 675 which is why we check */ 676 int *ep_in_current = ep_in_set; 677 int err_retval = -ENOMEM; 678 679 struct mts_desc * new_desc; 680 struct usb_device *dev = interface_to_usbdev (intf); 681 682 /* the current altsetting on the interface we're probing */ 683 struct usb_host_interface *altsetting; 684 685 MTS_DEBUG_GOT_HERE(); 686 MTS_DEBUG( "usb-device descriptor at %x\n", (int)dev ); 687 688 MTS_DEBUG( "product id = 0x%x, vendor id = 0x%x\n", 689 le16_to_cpu(dev->descriptor.idProduct), 690 le16_to_cpu(dev->descriptor.idVendor) ); 691 692 MTS_DEBUG_GOT_HERE(); 693 694 /* the current altsetting on the interface we're probing */ 695 altsetting = intf->cur_altsetting; 696 697 698 /* Check if the config is sane */ 699 700 if ( altsetting->desc.bNumEndpoints != MTS_EP_TOTAL ) { 701 MTS_WARNING( "expecting %d got %d endpoints! Bailing out.\n", 702 (int)MTS_EP_TOTAL, (int)altsetting->desc.bNumEndpoints ); 703 return -ENODEV; 704 } 705 706 for( i = 0; i < altsetting->desc.bNumEndpoints; i++ ) { 707 if ((altsetting->endpoint[i].desc.bmAttributes & 708 USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_BULK) { 709 710 MTS_WARNING( "can only deal with bulk endpoints; endpoint %d is not bulk.\n", 711 (int)altsetting->endpoint[i].desc.bEndpointAddress ); 712 } else { 713 if (altsetting->endpoint[i].desc.bEndpointAddress & 714 USB_DIR_IN) 715 *ep_in_current++ 716 = altsetting->endpoint[i].desc.bEndpointAddress & 717 USB_ENDPOINT_NUMBER_MASK; 718 else { 719 if ( ep_out != -1 ) { 720 MTS_WARNING( "can only deal with one output endpoints. Bailing out." ); 721 return -ENODEV; 722 } 723 724 ep_out = altsetting->endpoint[i].desc.bEndpointAddress & 725 USB_ENDPOINT_NUMBER_MASK; 726 } 727 } 728 729 } 730 731 732 if ( ep_out == -1 ) { 733 MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); 734 return -ENODEV; 735 } 736 737 738 new_desc = kzalloc(sizeof(struct mts_desc), GFP_KERNEL); 739 if (!new_desc) 740 goto out; 741 742 new_desc->urb = usb_alloc_urb(0, GFP_KERNEL); 743 if (!new_desc->urb) 744 goto out_kfree; 745 746 new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL); 747 if (!new_desc->context.scsi_status) 748 goto out_free_urb; 749 750 new_desc->usb_dev = dev; 751 new_desc->usb_intf = intf; 752 753 /* endpoints */ 754 new_desc->ep_out = ep_out; 755 new_desc->ep_response = ep_in_set[0]; 756 new_desc->ep_image = ep_in_set[1]; 757 758 if ( new_desc->ep_out != MTS_EP_OUT ) 759 MTS_WARNING( "will this work? Command EP is not usually %d\n", 760 (int)new_desc->ep_out ); 761 762 if ( new_desc->ep_response != MTS_EP_RESPONSE ) 763 MTS_WARNING( "will this work? Response EP is not usually %d\n", 764 (int)new_desc->ep_response ); 765 766 if ( new_desc->ep_image != MTS_EP_IMAGE ) 767 MTS_WARNING( "will this work? Image data EP is not usually %d\n", 768 (int)new_desc->ep_image ); 769 770 new_desc->host = scsi_host_alloc(&mts_scsi_host_template, 771 sizeof(new_desc)); 772 if (!new_desc->host) 773 goto out_kfree2; 774 775 new_desc->host->hostdata[0] = (unsigned long)new_desc; 776 if (scsi_add_host(new_desc->host, &dev->dev)) { 777 err_retval = -EIO; 778 goto out_host_put; 779 } 780 scsi_scan_host(new_desc->host); 781 782 usb_set_intfdata(intf, new_desc); 783 return 0; 784 785 out_host_put: 786 scsi_host_put(new_desc->host); 787 out_kfree2: 788 kfree(new_desc->context.scsi_status); 789 out_free_urb: 790 usb_free_urb(new_desc->urb); 791 out_kfree: 792 kfree(new_desc); 793 out: 794 return err_retval; 795} 796 797static void mts_usb_disconnect (struct usb_interface *intf) 798{ 799 struct mts_desc *desc = usb_get_intfdata(intf); 800 801 usb_set_intfdata(intf, NULL); 802 803 usb_kill_urb(desc->urb); 804 scsi_remove_host(desc->host); 805 806 scsi_host_put(desc->host); 807 usb_free_urb(desc->urb); 808 kfree(desc->context.scsi_status); 809 kfree(desc); 810} 811 812module_usb_driver(mts_usb_driver); 813 814MODULE_AUTHOR( DRIVER_AUTHOR ); 815MODULE_DESCRIPTION( DRIVER_DESC ); 816MODULE_LICENSE("GPL"); 817