1##### hostapd configuration file ##############################################
2# Empty lines and lines starting with # are ignored
3
4# Example configuration file for wired authenticator. See hostapd.conf for
5# more details.
6
7interface=eth0
8driver=wired
9logger_stdout=-1
10logger_stdout_level=1
11debug=2
12dump_file=/tmp/hostapd.dump
13
14ieee8021x=1
15eap_reauth_period=3600
16
17use_pae_group_addr=1
18
19
20##### RADIUS configuration ####################################################
21# for IEEE 802.1X with external Authentication Server, IEEE 802.11
22# authentication with external ACL for MAC addresses, and accounting
23
24# The own IP address of the access point (used as NAS-IP-Address)
25own_ip_addr=127.0.0.1
26
27# Optional NAS-Identifier string for RADIUS messages. When used, this should be
28# a unique to the NAS within the scope of the RADIUS server. For example, a
29# fully qualified domain name can be used here.
30nas_identifier=ap.example.com
31
32# RADIUS authentication server
33auth_server_addr=127.0.0.1
34auth_server_port=1812
35auth_server_shared_secret=radius
36
37# RADIUS accounting server
38acct_server_addr=127.0.0.1
39acct_server_port=1813
40acct_server_shared_secret=radius
41