25f73ed5c67d17ecf8cefd560f55211cce726086 |
|
27-Sep-2013 |
Vivien Didelot <vivien.didelot@savoirfairelinux.com> |
misc: (at24) move header to linux/platform_data/ This patch moves the at24.h header from include/linux/i2c to include/linux/platform_data and updates existing support accordingly. It also fixes the following checkpatch warning: WARNING: please, no space before tabs #436: FILE: include/linux/platform_data/at24.h:31: + * ^Iu8 *mac_addr = ethernet_pdata->mac_addr;$ Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
834acb2af6e8255a026c754fac3d1bc3f32b0c1a |
|
18-Aug-2013 |
Philip Avinash <avinashphilip@ti.com> |
ARM: davinci: board: gpio device creation Create GPIO device for existing DaVinci boards. While at it, group related header files together. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> [nsekhar@ti.com: remove soc bits from this patch and simplify commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
016b9eb0c52ed7349ffdb42b4e51c93ad1f5d90a |
|
04-Sep-2013 |
Brian Norris <computersforpeace@gmail.com> |
ARM: davinci: dm365 evm: fix unused variable warning If neither CONFIG_SND_DM365_AIC3X_CODEC nor CONFIG_SND_DM365_VOICE_CODEC are defined, we may get warnings like: arch/arm/mach-davinci/board-dm365-evm.c:179:33: warning: 'dm365_evm_snd_data' defined but not used [-Wunused-variable] To fix this, just mark the struct as __maybe_unused. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
fcf7157ba3b50e57653544421250ebbe81a33d81 |
|
19-Jun-2013 |
Manjunathappa, Prakash <prakash.pm@ti.com> |
ARM: davinci: serial: get rid of davinci_uart_config "struct davinci_uart_config" was introduced to specify UART ports brought out or enabled on the board. But none of the boards use it for that purpose and we are not going to add anymore board files, so remove the structure. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Suggested-by: Sekhar Nori <nsekhar@ti.com> [nsekhar@ti.com: split patch to remove davinci_serial_setup_clk() changes.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
9c559708b6cda71d8fdabc3f98cb7e98edbd4f0b |
|
12-Jul-2013 |
Sekhar Nori <nsekhar@ti.com> |
ARM: davinci: make file local variables static Make file local variables static in mach-davinci. This fixes sparse warnings of the form: arch/arm/mach-davinci/dm355.c:863:27: warning: symbol 'dm355_venc_pdata' was not declared. Should it be static? Cc: Prabhakar Lad <prabhakar.csengg@gmail.com> Acked-by: Prabhakar Lad <prabhakar.csengg@gmail.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
68f9f8ae98a580fa710f9652b01b9690e224fb1f |
|
25-May-2013 |
Lad, Prabhakar <prabhakar.csengg@gmail.com> |
[media] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata Remove init_enable from ths7303 pdata as it is being dropped from ths7303_platform_data. The purpose of init_enable was that the device should start streaming video immediately but instead the bridge drivers should call s_stream explicitly for such devices. This is in fact what happens for the dm365, so setting init_enable here never made sense in the first place. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> [hans.verkuil@cisco.com: improve the commit comment] Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
89cdbba84157a41404ee2de30142d839596eece9 |
|
12-Apr-2013 |
Lad, Prabhakar <prabhakar.csengg@gmail.com> |
[media] ARM: daVinci: dm644x/dm355/dm365: replace V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL respectively as this are the proper video standards. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
542b5bd226b0f5d5e9190cb96e6d96a912394795 |
|
14-Mar-2013 |
Lad, Prabhakar <prabhakar.csengg@gmail.com> |
[media] ARM: davinci: dm365 EVM: add support for VPBE display add support for V4L2 video display to DM365 EVM. Support for SD and ED modes is provided, along with Composite and Component outputs. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
120c66046cc8931259867ac1cdc6de0d0e742fb5 |
|
19-Mar-2013 |
Lad, Prabhakar <prabhakar.csengg@gmail.com> |
[media] ARM: davinci: dm365: add support for v4l2 video display Create platform devices for various video modules like venc,osd, vpbe and v4l2 driver for dm365. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
d7ca4c755a82eda8f0fc4f72c52130056b28c7d2 |
|
28-Mar-2013 |
Manjunathappa, Prakash <prakash.pm@ti.com> |
ARM: davinci: mmc: derive version information from device name Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
6bb27d7349db51b50c40534710fe164ca0d58902 |
|
08-Nov-2012 |
Stephen Warren <swarren@nvidia.com> |
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
b6f1ffed9d8a830ab94fd3fc6182e2fc8c77cba0 |
|
02-Aug-2012 |
m-karicheri2@ti.com <m-karicheri2@ti.com> |
ARM: davinci: convert platform code to use clk_prepare/clk_unprepare As a first step towards migrating davinci platforms to use common clock framework, replace all instances of clk_enable() with clk_prepare_enable() and clk_disable() with clk_disable_unprepare(). Until the platform is switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just adds a might_sleep() call and would work without any issues. This will make it easy later to switch to common clk based implementation of clk driver from DaVinci specific driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
ec2a0833e5157fab6cac5f57a49b2f31eb418a39 |
|
24-Aug-2012 |
Arnd Bergmann <arnd@arndb.de> |
ARM: davinci: move platform_data definitions Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
|
3aa3e8407ae9023c5ff59bf5c81fc2553c31eb70 |
|
26-Apr-2012 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: davinci: use machine specific hook for late init Cc: Kevin Hilman <khilman@ti.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sekhar Nori <nsekhar@ti.com>
|
39c6d2d1d743b8c925abae7043acc35e6cdc0051 |
|
21-Dec-2011 |
Manjunath Hadli <manjunath.hadli@ti.com> |
ARM: davinci: create new common platform header for davinci Remove individual platform header files for dm365, dm355, dm644x and dm646x and consolidate it into a single and common header file davinci.h placed in arch/arm/mach-davinci. This reduces the pollution in the include/mach and is consistent with Russell's suggestions as part of his "pet peaves" mail. (See #4 in: http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/071516.html) While at it, fix the forward declaration of spi_board_info, and include the right header file instead. The further patches in the series take advantage of this consolidation for easy implementation of IO_ADDRESS elimination. Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com> [nsekhar@ti.com: make davinci.h the first local include file, fix forward declaration of spi_board_info and add back Deep Root Systems, LLC copyright] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
f6f97588a42373a0181215a5f70958756f2492c2 |
|
20-Jan-2012 |
Sekhar Nori <nsekhar@ti.com> |
ARM: davinci: update mdio bus name Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac: use an unique MDIO bus name") introduced during the v3.3 merge window updated the davinci mdio bus name to make it unique. Update the bus name in board files which use DaVinci MDIO bus to match the new name. Without this PHY is not detected with error like: PHY 0:01 not found net eth0: could not connect to phy 0:01 Tested on DM365 and DA850 EVMs. Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
c6121ddd1f75278ab77504af2914d07831558672 |
|
05-Dec-2011 |
Sekhar Nori <nsekhar@ti.com> |
ARM: 7190/1: restart: davinci: use new restart hook Rather than using DaVinci specific davinci_soc_info based restart hook, use the restart hook available in the machine descriptor instead. Tested on DM365 and AM18x EVMs. v2: Changed to use restart hook in machine descriptor per Russell's comment. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
45fc4cce939adc883fba5e02f1f3e0e9ff020c30 |
|
09-Nov-2011 |
Shankarmurthy,Akshay <akshay.s@ti.com> |
ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay <akshay.s@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
bb9ebd4e714385a2592a482845865ef2d58b2868 |
|
01-Jun-2011 |
Brian Norris <computersforpeace@gmail.com> |
mtd: nand: rename NAND_USE_FLASH_BBT Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
a40f73419f02e40555f692785ea1c1813d5b4c12 |
|
01-Jun-2011 |
Brian Norris <computersforpeace@gmail.com> |
mtd: nand: consolidate redundant flash-based BBT flags This patch works with the following three flags from two headers (nand.h and bbm.h): (1) NAND_USE_FLASH_BBT (nand.h) (2) NAND_USE_FLASH_BBT_NO_OOB (nand.h) (3) NAND_BBT_NO_OOB (bbm.h) These flags are all related and interdependent, yet they were in different headers. Flag (2) is simply the combination of (1) and (3) and can be eliminated. This patch accomplishes the following: * eliminate NAND_USE_FLASH_BBT_NO_OOB (i.e., flag (2)) * move NAND_USE_FLASH_BBT (i.e., flag (1)) to bbm.h It's important to note that because (1) and (3) are now both found in bbm.h, they should NOT be used in the "nand_chip.options" field. I removed a small section from the mtdnand DocBook because it referes to NAND_USE_FLASH_BBT in nand.h, which has been moved to bbm.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
e7e5601458a49fdcb1b49b4696e7530c25f86f25 |
|
06-Jul-2011 |
Nicolas Pitre <nicolas.pitre@linaro.org> |
ARM: mach-davinci: convert boot_params to atag_offset Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
|
9daedd833a38edd90cf7baa1b1fcf61c3a0721e3 |
|
18-Jul-2011 |
Jon Povey <jon.povey@racelogic.co.uk> |
davinci: DM365 EVM: fix video input mux bits Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
f68deabf3dc6c13fb80ec28575d0153c59f7ecce |
|
06-Jul-2011 |
Nicolas Pitre <nicolas.pitre@linaro.org> |
ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
|
6451d7783ba5ff24eb1a544eaa6665b890f30466 |
|
15-Oct-2010 |
Nicolas Pitre <nicolas.pitre@linaro.org> |
arm: remove machine_desc.io_pg_offst and .phys_io Since we're now using addruart to establish the debug mapping, we can remove the io_pg_offst and phys_io members of struct machine_desc. The various declarations were removed using the following script: grep -rl MACHINE_START arch/arm | xargs \ sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }' [ Initial patch was from Jeremy Kerr, example script from Russell King ] Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: Eric Miao <eric.miao at canonical.com>
|
782f2d782771484bb951be1c394ca2128ed7774e |
|
15-Sep-2010 |
Cyril Chemparathy <cyril@ti.com> |
davinci: cleanup mdio arch code and switch to phy_id This patch removes davinci architecture code that has now been rendered useless by the previous patches in the MDIO separation series. In addition, the earlier phy_mask definitions have been replaced with corresponding phy_id definitions. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Tested-by: Michael Williamson <michael.williamson@criticallink.com> Tested-by: Caglar Akyuz <caglarakyuz@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
13d36a923da6a1e0584e07d91320373c790c01c3 |
|
27-Aug-2010 |
Sekhar Nori <nsekhar@ti.com> |
davinci: dm365 evm: use EDMAQ_3 as the audio DMA queue By default the audio driver uses EDMAQ_0 as the DMA queue, but on DM365 this queue is specially designed for video transfers with a large fifo size. Having both audio and video transfers on the same queue leads to noise on the audio side. This patch changes the audio queue number for DM365 to EDMAQ_3. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
bd808947040ba53b2b0e52dde598a9414fb27bba |
|
07-May-2010 |
Cyril Chemparathy <cyril@ti.com> |
Davinci: aintc/cpintc - use ioremap() This patch implements the following: - interrupt initialization uses ioremap() instead of passing a virtual address via davinci_soc_info. - machine definitions directly point to cp_intc_init() or davinci_irq_init() - davinci_intc_type and davinci_intc_base now get initialized in controller specific init functions instead of davinci_common_init() - minor fix in davinci_irq_init() to use intc_irq_num instead of DAVINCI_N_AINTC_IRQ Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
7034217467abe91b5bc63fc2993bb8eec1cf3c9f |
|
16-Apr-2010 |
Sergei Shtylyov <sshtylyov@ru.mvista.com> |
DaVinci: move AEMIF #define's to the proper headers Currently each DaVinci board file #define's its own version of the EMIFA base addresses (all named DAVINCI_ASYNC_EMIF_*_BASE), which leads to duplication. Move these #define's to the SoC specific headers, changing their prefixes from 'DAVINCI' to the 'DM355', 'DM644X', and 'DM646X' since all these base addresses are SoC specific... And while at it, rename DM646X_ASYNC_EMIF_DATA_CE0_BASE to DM646X_ASYNC_EMIF_CS2_SPACE_BASE in order to match the DM646x datasheet. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
5a0e3ad6af8660be21ca98a971cd00f331318c05 |
|
24-Mar-2010 |
Tejun Heo <tj@kernel.org> |
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
aa9b88ee80d3985ebae9567a8f4e0d07ce15b5a7 |
|
11-Mar-2010 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
DaVinci: DM365: Voice Codec support for the DM365 EVM The DM365 EVM has two codecs: the Audio Codec (AIC3x) and the Voice Codec, the idea is to have both enabled in the same kernel simultaneously. However, the current soc-core doesn't support simultaneous codecs, once that support will have added, a patch will be posted to enable both codecs in the DM365 EVM. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
5f19daa16ffca55db5b0253eba2bd0f71ee7f7f4 |
|
01-Feb-2010 |
Sandeep Paulraj <s-paulraj@ti.com> |
DaVinci DM365: Adding support for SPI EEPROM The DM365 Spectrum Digital EVM comes with an EEPROM connected to SPI0. This patch adds support for the SPI EEPROM. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
a30d6744cf3bfc62d5cdcc9756e7e8e97fe39f17 |
|
01-Feb-2010 |
Murali Karicheri <mkaricheri@gmail.com> |
V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365 This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
f2a4c59df62f4493c7cf7dfd349ec66bdd4b9fec |
|
01-Feb-2010 |
Murali Karicheri <m-karicheri2@ti.com> |
DaVinci - Adding platform & board changes for vpfe capture on DM365 This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
c92b29ec4a7a197199b8b937b909d80dc79d8e5b |
|
13-Nov-2009 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
DaVinci: DM365: Add the device_enable for the DaVinci Keyscan Adds the device_enable function to the DaVinci Keyscan platform data to setup the PINMUX configuration. It also removes #ifdef from the DM365 EVM board in order to load it properly as a module. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
99381b4f114d00ccfe2495aa79755b6094bdd0c9 |
|
05-Nov-2009 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
990c09d5f5b2079e8bf3c6615c78fa5ed2b97147 |
|
13-Oct-2009 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
Davinci: DM365: Enable DaVinci Key Scan support for DM365 EVM The general structures are defined at DM365 SoC file and the specific platform data structure for the EVM is defined at board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com>
|
42d399e4189346b495fec8a9a267e8b7f744ee48 |
|
02-Oct-2009 |
Sergei Shtylyov <sshtylyov@ru.mvista.com> |
DaVinci: remove unneeded #include's There have accumulated quite a lot of them after the code reorganizations... In several cases I had to replace #include <linux/dma-mapping.h> which wasn't needed directly but happened to #include <linux/err.h> which was needed. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
dc4c05a5131d691ccbc06c2e670385127871bdbe |
|
17-Sep-2009 |
Sneha Narnakaje <nsnehaprabha@ti.com> |
davinci: DM365: Update NAND driver platform data This patch updates the NAND driver platform data to use 4-bit ECC and the ECC_HW/ECC_HW_OOB_FIRST modes. Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
e9ab3214a8fc546d62e22064caa559b912620106 |
|
02-Sep-2009 |
Miguel Aguilar <miguel.aguilar@ridgerun.com> |
Davinci: DM365: Add platform device for McBSP 1) Registers the platform device for McBSP on dm365. 2) Add platform data to DM365 EVM board file. 3) Set i2c address for audio codec at DM365 EVM board file. Signed-off-by: Miguel Aguilar <miguel.aguilar@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
9a0f6b4646a0acaf7f06fd2e02f10f303fe85d8f |
|
22-Sep-2009 |
Jaswinder Singh Rajput <jaswinder@kernel.org> |
ARM: includecheck fix: mach-davinci, board-dm365-evm.c fix the following 'make includecheck' warning: arch/arm/mach-davinci/board-dm365-evm.c: mach/common.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
ff255c6caa389c90c68f5421f60ebfc40b68ea1b |
|
21-Jun-2009 |
David Brownell <dbrownell@users.sourceforge.net> |
davinci: dm365 evm cpld support: leds, card detect, other setup Add basic support for the CPLD on the DM365 EVM board: - Read SW5 to set up NAND and keypad vs (someday) OneNAND - Export MMC/SD card detect and writeprotect signals - LED support (same layout as on DM355 EVM) - Static config for video input: * external HD imager precludes MMC1, Ethernet, audio * else either tvp5146 (SD/default) or tvp7002 (HD) The video input could actually be switched around dynamically; change that if/when that's needed (and after those other video inputs have driver support). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
37b798da5df377521a8cd32a82467aa2d431f33e |
|
20-Jun-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
davinci: dm365: add NAND support to EVM board Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
a45c8ba30bca0c3257785cae28680781fd356a85 |
|
20-Jun-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
davinci: MMC/SD Support for dm365 EVM Patch adds support for MMC/SD in the DM365 EVM. Pinmux for MMC/SD slot 1 on the DM365 EVM is also configured. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
8ed0a9d4e7cfff439f95d08c882841f25a12bf54 |
|
20-Jun-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
davinci: dm365: EMAC support for SoC and dm365 EVM The patch adds Support for EMAC in the DM365 SOC and the DM365 EVM board. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|
37dd00956361528776d1dd76eb303a55b91fb23a |
|
09-Jun-2009 |
Sandeep Paulraj <s-paulraj@ti.com> |
davinci: Adding DM365 EVM board support The patch adds support for Evaluation Module (EVM) board for the dm365 SoC. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
|