| 0d24d1f2495ec4d6996c70c8edec202053cf7e69 |
|
13-May-2014 |
Yang Wei <Wei.Yang@windriver.com> |
clocksource: dw_apb_timer_of: Do not trace read_sched_clock
We do not need to trace read_sched_clock function,
so add notrace attribute for this function.
Signed-off-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
| 9ab4727c1d41e50b67aecde4bf11879560a3ca78 |
|
10-Dec-2013 |
Dinh Nguyen <dinguyen@altera.com> |
clocksource: dw_apb_timer_of: Fix support for dts binding "snps,dw-apb-timer"
In commit 620f5e1cbf (dts: Rename DW APB timer compatible strings), both
"snps,dw-apb-timer-sp" and "snps,dw-apb-timer-osc" were deprecated in place
of "snps,dw-apb-timer". But the driver also needs to be udpated in order to
support this new binding "snps,dw-apb-timer".
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
| 85dc6ee1237c8a4a7742e6abab96a20389b7d682 |
|
10-Dec-2013 |
Dinh Nguyen <dinguyen@altera.com> |
clocksource: dw_apb_timer_of: Fix read_sched_clock
The read_sched_clock should return the ~value because the clock is a
countdown implementation. read_sched_clock() should be the same as
__apbt_read_clocksource().
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
| 1cf0203ac9e3d7abed67196db494469b24fe09e3 |
|
01-Oct-2013 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
clocksource: dw_apb_timer_of: Mark a few more functions as __init
These are all only called by dw_apb_timer_init which is an __init
function, too
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
| 326e31eebe61dc838e031ea16968b2cfb43443e3 |
|
01-Oct-2013 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
clocksource: Put nodes passed to CLOCKSOURCE_OF_DECLARE callbacks centrally
Instead of letting each driver call of_node_put do it centrally in the
loop that also calls the CLOCKSOURCE_OF_DECLARE callbacks. This is less
prone to error and also moves getting and putting the references into the
same function.
Consequently all respective of_node_put calls in drivers are removed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: David Brown <davidb@codeaurora.org>
|
| fa8296ae62364d80bb82c4c011469ae3e423d509 |
|
19-Jul-2013 |
Stephen Boyd <sboyd@codeaurora.org> |
clocksource: dw_apb_timer_of: Switch to sched_clock_register()
The 32 bit sched_clock interface now supports 64 bits. Upgrade to
the 64 bit function to allow us to remove the 32 bit registration
interface.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
| d3d8fee4138a06b4b9ca172d25b8412fc33ad3f3 |
|
18-Jun-2013 |
John Stultz <john.stultz@linaro.org> |
Revert "dw_apb_timer_of.c: Remove parts that were picoxcell-specific"
This reverts commit 55a68c23e0a675b2b8ac2656fd6edbf98b78e4c6.
In order to avoid a collision with dw_apb_timer changes in
the arm-soc tree, revert this change.
I'm leaving it to the arm-soc folks to sort out if they want
to keep the other side of the collision or if they're just going
to back it all out and try again during the next release cycle.
Reported-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
| 38ff87f77af0b5a93fc8581cff1d6e5692ab8970 |
|
02-Jun-2013 |
Stephen Boyd <sboyd@codeaurora.org> |
sched_clock: Make ARM's sched_clock generic for all architectures
Nothing about the sched_clock implementation in the ARM port is
specific to the architecture. Generalize the code so that other
architectures can use it by selecting GENERIC_SCHED_CLOCK.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[jstultz: Merge minor collisions with other patches in my tree]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
| 10021488997317d1121505a7ac659124c058efed |
|
04-Jun-2013 |
Heiko Stuebner <heiko@sntech.de> |
clocksource: dw_apb_timer_of: use clocksource_of_init
dw_apb_timer_init used to search the devicetree for matching timer
devices, making calls to it from board files necessary.
Change the dw_apb_timer_init to work with CLOCKSOURCE_OF_DECLARE.
With this change the function gets called once for each timer node
and tracks these number of calls to attach clockevent and clocksource
devices to the nodes.
Also remove the calls to dw_apb_timer_init from all previous users, as
clocksource_of_init is the default for init_time now.
Tested on the upcoming rk3066 code.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Dinh Nguyen <dinguyen@altera.com>
|
| a8b447f2bbbba737ff4478f498d7f83c75a9461b |
|
04-Jun-2013 |
Heiko Stuebner <heiko@sntech.de> |
clocksource: dw_apb_timer_of: add clock-handling
Add the possibility to get the clock-frequency from a timer clock instead
of specifying it as dt property. Additionally also add the possibility
to also define a controlling periphal clock for the timer block.
The clock-frequency property is kept to act as fallback if no clocks
are specified.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
|
| a1198f83407ae3421f3f58355a0f296d5ea6249c |
|
04-Jun-2013 |
Heiko Stuebner <heiko@sntech.de> |
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Currently the dw_apb_timer always expects a separate special timer to be
availbable for the sched_clock. Some devices using dw_apb_timers do not
have this sptimer but can use the clocksource as sched_clock instead.
Therefore enable the driver to distiguish between devices with and without
sptimer based on the devicetree data and select the correct timer as
sched_clock.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jamie Iles <jamie@jamieiles.com>
|
| 1a33bd2be705cbb3f57d7223b60baea441039307 |
|
29-May-2013 |
Baruch Siach <baruch@tkos.co.il> |
clocksource: dw_apb: Fix error check
irq_of_parse_and_map() returns 0 on error, while the code checks for NO_IRQ.
This breaks on platforms that have NO_IRQ != 0.
Cc: <stable@vger.kernel.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
| 0a0a7e66fa269de78975ea8d4e825a66d92b8d70 |
|
26-May-2013 |
Baruch Siach <baruch@tkos.co.il> |
clocksource: dw_apb: Remove unused header
The time.h header seems not to be used by current code.
Removing this include allows the driver to build on other
architecture that do not have this header.
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[tweaked commit message and header]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
| 55a68c23e0a675b2b8ac2656fd6edbf98b78e4c6 |
|
07-May-2013 |
Pavel Machek <pavel@denx.de> |
dw_apb_timer_of.c: Remove parts that were picoxcell-specific
It seems we made a mistake when creating dw_apb_timer_of.c:
picoxcell sched_clock had parts that were not related to
dw_apb_timer, yet we moved them to dw_apb_timer_of, and tried to
use them on socfpga.
This results in system where user/system time is not measured
properly, as demonstrated by
time dd if=/dev/urandom of=/dev/zero bs=100000 count=100
So this patch switches sched_clock to hardware that exists on both
platforms, and adds missing of_node_put() in dw_apb_timer_init().
Signed-off-by: Pavel Machek <pavel@denx.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
| 6bb27d7349db51b50c40534710fe164ca0d58902 |
|
08-Nov-2012 |
Stephen Warren <swarren@nvidia.com> |
ARM: delete struct sys_timer
Now that the only field in struct sys_timer is .init, delete the struct,
and replace the machine descriptor .timer field with the initialization
function itself.
This will enable moving timer drivers into drivers/clocksource without
having to place a public prototype of each struct sys_timer object into
include/linux; the intent is to create a single of_clocksource_init()
function that determines which timer driver to initialize by scanning
the device dtree, much like the proposed irqchip_init() at:
http://www.spinics.net/lists/arm-kernel/msg203686.html
Includes mach-omap2 fixes from Igor Grinberg.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
|
| cfda590178a16e2b5edb09e131460b3e64819807 |
|
11-Jul-2012 |
Dinh Nguyen <dinguyen@altera.com> |
clocksource: dw_apb_timer: Add common DTS glue for dw_apb_timer
Make a common device tree glue for clocksource/dw_apb_timer.
Move mach-picoxcell/time.c to be a generic device tree application
of the dw_apb_timer.
Configure mach-picoxcell to use the dw_apb_timer_of device tree
implementation in drivers/clocksource.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|