| aac307f9dd5ce1fe651140a036ab4b0a0571b54a |
|
26-Aug-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: comedi_pci: introduce comedi_pci_detach()
Introduce a generic (*detach) function for comedi PCI drivers to handle
the boilerplate code needed to detach a PCI driver.
This function works similar to comedi_legacy_detach() where it will:
* free the dev->irq if it has been requested
* iounmap the dev->mmio addres if it has been ioremap'ed
The helper then calls comedi_pci_disable() to release the regions and
disable the PCI device.
Use the new helper directly for the (*detach) in the following cases:
* where comedi_pci_disable() is used directly for the (*detach)
* where the detach function is just boilerplate
Use the new helper in the (*detach) of the simpler PCI drivers. Call
the helper after disabling interrupts (reset) and before any additional
cleanup (kfree) to avoid any race conditions with the interrupt handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 472cd3db7b47a0720678e4c7cc1a472d2c06c218 |
|
19-Jul-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: remove unnecessary PCI_DEVICE_ID_* defines
These defines are only used once in the pci_device_id tables. Remove
them and just open code the values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| c93999c21319439c4fe2da85f2ec40ed477379ac |
|
03-Feb-2014 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: remove final 'attach' messages
These messages are just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 41e043fcfa2236bb2c4a8335eb09f4c8cee224b3 |
|
03-Dec-2013 |
Jingoo Han <jg1.han@samsung.com> |
staging: remove DEFINE_PCI_DEVICE_TABLE macro
Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 97f4289ad08cffe55de06d4ac4f89ac540450aee |
|
30-Aug-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: drivers: use comedi_dio_update_state() for simple cases
Use comedi_dio_update_state() to handle the boilerplate code to update
the subdevice s->state for simple cases where the hardware is updated
when any channel is modified.
Also, fix a bug in the amplc_pc263 and amplc_pci263 drivers where the
current state is not returned in data[1].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| ce157f8032bbd46d9427034c335b0afd751da25d |
|
25-Jun-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: don't rely on comedidev.h to include headers
comedidev.h is the main kernel header for comedi. Every comedi
driver includes this header which then includes a number of
<linux/*> headers. All the drivers need <linux/module.h> and some
of them need <linux/delay.h>. The rest are not needed by any of
the drivers.
Remove all the includes in comedidev.h except for <linux/dma-mapping.h>,
which is needed to pick up the enum dma_data_direction for the
comedi_subdevice definition, and "comedi.h", which is the uapi
header for comedi.
Add <linux/module.h> to all the comedi drivers and <linux/delay.h>
to the couple that need it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 641f064e5df6fb3aaeb6256031a153a5efb16ca6 |
|
25-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove FSF address from boilerplate text
Addresses change...
Remove the paragraph with the FSF address from all the comedi source
files.
Also, remove the paragraph about the finding the complete GPL in the
COPYING file since it's unnecessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5993f3a2692eed3c74c86882155b8703a0060ad5 |
|
08-Apr-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: remove unnecessary dev->board_name initialization
The dev->board_name is now initialized by the comedi core before calling
the(*attach) or (*auto_attach) function in a driver. As long as the driver
does no additional probing, it's no longer necessary initialize the board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 818f569fe930c5b8a05d1a44ece3c63c99c13c88 |
|
13-Mar-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi_pci: pass comedi_device to comedi_pci_enable()
Make comedi_pci_enable() use the same parameter type as
comedi_pci_disable(). This also allows comedi_pci_enable
to automatically determine the resource name passed to
pci_request_regions().
Make sure the errno value returned is passed on instead of
assuming an errno. Also, remove any kernel noise that is
generated when the call fails.
The National Instruments drivers that use the mite module
currently enable the PCI device in the mite module. For
those drivers move the call to comedi_pci_enable into the
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 7f072f54ae5dc9965cbe450419b1389d13e2b849 |
|
13-Mar-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi_pci: make comedi_pci_disable() safe to call
Currently all the comedi PCI drivers need to do some checking in
their (*detach) before calling comedi_pci_disable() in order to
make sure the PCI device has actually be enabled.
Change the parameter passed to comedi_pci_disable() from a struct
pci_dev pointer to a comedi_device pointer and have comedi_pci_disable()
handle all the checking.
For most comedi PCI drivers this also allows removing the local
variable holding the pointer to the pci_dev. For some of the drivers
comedi_pci_disable can now be used directly as the (*detach) function.
The National Instruments drivers that use the mite module currently
enable/disable the PCI device in the mite module. For those drivers
move the call to comedi_pci_disable into the driver and make sure
dev->iobase is set to a non-zero value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| b8f4ac237e382accd4b30c75043939f7ed9e79a6 |
|
05-Mar-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: comedi_pci: change the comedi_pci_auto_config() 'context'
The comedi_pci_auto_config() function is used to allow the PCI driver
(*probe) function to automatically call the comedi driver (*auto_attach).
This allows the comedi driver to be part of the PnP process when the
PCI device is detected.
Currently the comedi_pci_auto_config() always passes a 'context' of '0'
to comedi_auto_config(). This makes the 'context' a bit useless.
Modify comedi_pci_auto_config() to allow the comedi pci drivers to pass
a 'context' from the PCI driver.
Make all the comedi pci drivers pass the pci_device_id 'driver_data' as
the 'context'. Since none of the comedi pci drivers currently set the
'driver_data' the 'context' will still be '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 33782dd5edf8db3cdb7c81a3523bf743dd0209b7 |
|
30-Jan-2013 |
H Hartley Sweeten <hsweeten@visionengravers.com> |
staging: comedi: conditionally build in PCI driver support
Separate the comedi_pci_* functions out of drivers.c into a new
source file, comedi_pci.c. This allows conditionally building
support for comedi PCI drivers into the comedi core. Fix the
Kconfig and Makefile appropriately.
Group all the comedi_pci_* prototypes and related defines into one
place in comedidev.h. Protect these prototypes with an #ifdef and
provide some dummy functions so that the mixed ISA/PCI comedi
drivers will still build correctly.
Remove the #include <linux/pci.h> from comedidev.h and drivers.c. This
include is only needed by the comedi PCI driver support code and the
PCI drivers. The include should occur in those files.
Also, remove the #include <linux/pci.h> from a couple non-PCI drivers
since it's not needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 9901a4d75d007686e8f6473189cafc4b216b7449 |
|
22-Jan-2013 |
Peter Huewe <peterhuewe@gmx.de> |
staging/comedi: Use comedi_pci_auto_unconfig directly for pci_driver.remove
(Almost) all comedi pci drivers have some wrapper for their
pci_driver.remove function which simply calls comedi_pci_auto_unconfig
which has the same function prototype as the wrapper.
-> we can remove these wrappers and call comedi_pci_auto_unconfig
directly. This removes a lot some boilerplate code and saves some bytes.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 53b800198592b0ff96577ecc5f116f7d902a4362 |
|
19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
staging: comedi: remove use of __devexit
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| a690b7e535f2f97a3a05ee570715abeb60a8910f |
|
19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
staging: comedi: remove use of __devinit
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| a471eace7baa40cdf16d3f26b2f78ddce613ca8f |
|
19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
staging: comedi: remove use of __devexit_p
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 750af5e568d060ec6994cdcb4e86cdddfcd473c0 |
|
30-Oct-2012 |
Ian Abbott <abbotti@mev.co.uk> |
staging: comedi/drivers: use auto_attach instead of attach_pci
Change comedi drivers for PCI boards to use the new `auto_attach()`
method instead of the `attach_pci()` method. I plan to remove the
`attach_pci()` and `attach_usb()` methods from `struct comedi_driver`
once nothing is using them.
Tag the functions with `__devinit` where they are not already so tagged,
as they are only called during PCI probe.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 7fc465b106b40a598d83a0c98d0e8c2a1b4653ff |
|
23-Oct-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: auto-config drivers do not need to set hw_dev
The comedi core now sets the 'hw_dev' pointer in the function
comedi_auto_config_helper() before calling the auto attach
function in the driver.
Remove the now unnecessary call to comedi_set_hw_dev() in the
drivers that use the auto-config attach mechanism.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| b31654fe4b79ee650d12e194016c47e3640f440d |
|
06-Sep-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove subdevice pointer math
Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| d602a064f9818819d6c99d99f101bc6b1ae1540d |
|
17-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci: remove manual legacy attach
This driver uses the 'attach_pci' callback to attach the pci device
to the comedi subsystem. Since the 'attach' callback is now optional
it can be removed from the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 00d7a906cdd05b76b059102cacf98cfb853fa109 |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: cleanup contec_do_insn_bits
Create local variables for the mask and bits values passed in
the data pointer to make this function a bit clearer.
Return the state of the output bits (s->state) in data[1] since
this is what comedilib is expecting.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8d02b3aa670547f307b50058b2ca1c1fab2518ed |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: use attach_pci callback
Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an attach_pci callback function. Since the
driver does not require any external configuration options, disable
the legacy attach by making the attach simply return -ENOSYS. This
removes the need to walk to pci bus to find the pci_dev and the
need for the pci_dev_put in the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 3256837311344ef7efa41c717a280f95207e5140 |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove unneeded boardinfo code
The boardinfo code is not needed by this driver. Only one board
type is supported.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 86d466b86e0c04b2f0f6ae41f0de75082865912d |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: define register map for board
Only one board type is supported by this driver. Instead of
passing the register offsets for the digital in/out ports in
the boardinfo, define the register map and use that to access
the ports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8bba4439fb784d9f1aa74c1e13a42cd21f989ffc |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove unused fields in the boardinfo
The model, in_ports, out_ports, and out_boffs information in the
boardinfo is not used by the driver. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| f7f57effa46c29984640bbcc60a8b3e9761da8f2 |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove function trace messages
The dev_dbg function trace messages in the contec_do_insn_bits
and contec_di_insn_bits functions are just noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 5432e3f3e9f2d2644115b9c881c1e9dad0e1f8fc |
|
16-Aug-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove thisboard macro
This macro relies on a local variable of a specific name. Remove the
macro and use the comedi_board() helper to get the thisboard pointer.
Move the 'dev->board_name = thisboard->name;' in contec_attach().
The contec_find_pci_dev() function modifies the dev->board_ptr.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 49cd97b9beef15f7e946b659d45820f8812a3fe1 |
|
19-Jul-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: remove the private data
The private data is no longer needed by this driver. Remove the
struct, devpriv macro, and the allocation.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| e3ab476bee2c4b038ca9c8e3a2c2fd79f7403749 |
|
19-Jul-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: store the pci_dev in the comedi_device
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| b8acd7750a2366216d9ec81f96b0594f6bb86707 |
|
19-Jul-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: cleanup "find pci device" code
Add a couple local variables and reorder the tests to make
to make the more concise.
Change the printk to a dev_err when no match is found and reword
the message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| f0bd6d357527ed40c84e75f1f3137ea944f179db |
|
19-Jul-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: contec_pci_dio: factor out the "find pci device" code
Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| a2714e3e42e746d6c8525c35fdcc58fb60c2830d |
|
18-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: fix return value for insn_bits functions
The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 520706607befd1f5c20ec14db35d6be45791bc41 |
|
18-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: remove unneeded sanity check in insn_bits functions
The comedi core does the sanity check to make sure that the data length
the INSN_BITS instruction is 2. There is no need for the drivers to do
this check. Remove all the sanity checks in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| f41ad6675f2d5705a0fc1e210af8eb4a27dbacb4 |
|
18-Jun-2012 |
Ian Abbott <abbotti@mev.co.uk> |
staging: comedi: change device used in dev_...() calls
A previous set of patches by Ravishankar Karkala Mallikarjunayya
replaced a load of printk() calls with dev_info(), dev_err(), etc.
Unfortunately, these used the 'struct device *hw_dev' member of 'struct
comedi_device') as the first parameter of these dev_...() calls, but
that pointer is usually NULL, so the kernel log messages come out a bit
wrong (they contain the phrase "(NULL device *)").
Use the 'struct device *class_dev' member of 'struct comedi_device'
instead for these dev_...() calls. It will be non-NULL and somewhat
meaningful to users. It's also consistent with those comedi drivers
that already use the class_dev member in their dev_...() calls.
Some of the messages included the format "comedi%d" with the minor
device number used for the "%d". This is now redundant as it will be
the same as the dev_name() part of the kernel log message produced by
the dev_...() calls.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 8b6c56949ffa83dbc2a6e8fa3f98b10a19372207 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: propogate error code from comedi_alloc_subdevices
comedi_alloc_subdevices can fail with -EINVAL or -ENOMEM. When it
does fail make sure to pass the proper error code back.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbott@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 2f0b9d082e5d0056a3aca4be038483a564849196 |
|
12-Jun-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: export alloc_subdevices as comedi_alloc_subdevices
Move the inline alloc_subdevices() function from comedidev.h
to drivers.c and rename it to comedi_alloc_subdevices(). The
function is large enough to warrant being an exported symbol
rather than being an inline in every driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 55c03cff7fd73349473cc0a964df9d55b312dbbc |
|
22-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: remove private header comedi_pci.h
Remove the private header, comedi_pci.h, by moving the two
helper functions into divers.c and providing the prototypes
in comedidev.h.
This allows the comedi_pci_enable/disable helper functions
to be shared instead of having an inline version in every
comedi pci driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 484ecc95d9cdfa8b2f7029e2f3409cf078aed4ab |
|
18-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: cleanup all the comedi_driver 'detach' functions
1. Change the return type from int to void
All the detach functions, except for the comedi usb drivers, simply
return success (0). Plus, the return code is never checked in the
comedi core.
The comedi usb drivers do return error codes but the conditions can
never happen.
The first check is:
if (!dev)
return -EFAULT;
This checks that the passed comedi_device pointer is valid. The detach
function itself is called using this pointer so it MUST always be valid
or there is a bug in the core:
if (dev->driver)
dev->driver->detach(dev);
And the second check:
usb = dev->private;
if (!usb)
return -EFAULT;
The dev->private pointer is setup in the attach function to point to the
probed usb device. This value could be NULL if the attach fails. But,
since the comedi core is going to unload the driver anyway and does not
check for errors there is no gain by returning one.
After removing these checks from the comedi usb drivers the detach
functions required a bit of cleanup.
2. Remove all the printk noise in the detach functions
All of the printk output is really just noise. The user did a rmmod to
unload the driver, we really don't need to tell them about it.
Also, some of the messages are output using:
dev_dbg(dev->hw_dev, ...
or
dev_info(dev->hw_dev, ...
Unfortunately the hw_dev value is only used by drivers that are doing
DMA. For most drivers this variable is going to be NULL so the output
is not going to work as expected.
3. Refactor a couple static 'free_resource' functions into the detach
functions.
The 'free_resource' function is only being called by the detach and it
makes more sense to just absorb the code.
4. Remove a couple unnecessary braces for single statements.
5. Remove unnecessary comments.
Most of the comedi drivers appear to be based on the comedi skel driver
and have the comments from that driver included. These comments make
sense in the skel driver for reference but they don't need to be in any
of the actual drivers.
6. Remove all the extra whitespace.
It's not needed to make the functions any more readable.
7. Remove the now unused 'attached_successfully' variable in the
cb_pcimdda driver.
This variable was only used to conditionally output some driver noise
during the detach. Since all the printk's have been removed this
variable is no longer necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| ce41d7d666da4a3d12d0ad6d5b29146b25670037 |
|
16-May-2012 |
H Hartley Sweeten <hartleys@visionengravers.com> |
staging: comedi: refactor contec_pci_dio driver and use module_comedi_pci_driver
Move the module_init/module_exit routines and the associated
struct comedi_drive and struct pci_driver to the end of the
source. This is more typical of how other drivers are written
and removes the need for the forward declarations.
Refactor some of the other functions to remove the remaining
forward declarations.
Remove some unused code stubs that are in #if 0 / #endif
blocks.
Convert the driver to use the module_comedi_pci_driver() macro
which makes the code smaller and a bit simpler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 4c093a6dc2240fd54d71a25b284e02d51509e430 |
|
30-Mar-2012 |
Ian Abbott <abbotti@mev.co.uk> |
staging: comedi: pass 'struct comedi_driver *' to comedi_..._auto_config
The comedi_pci_auto_config() and comedi_usb_auto_config() functions
currently take a board name parameter which is actually a driver name
parameter. Replace it with a pointer to the struct comedi_driver. This
will allow comedi_pci_auto_config() and comedi_usb_auto_config() to call
bus-type-specific auto-configuration hooks in the struct comedi_driver
if they exist (they don't yet). The idea is that these
bus-type-specific auto-configuration hooks won't have to search the bus
for the device being auto-configured like 'attach()' hook has to.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
| 89c5db09627c65d5fab8b71943dd493846e25d04 |
|
12-Dec-2011 |
Ravishankar karkala Mallikarjunayya <ravishankar.km@greenturtles.in> |
Staging: comedi: fix printk issue in contec_pci_dio.c
This is a patch to the contec_pci_dio.c file that fixes up a
printk warning found by the checkpatch.pl tool.
Converted printks to dev_dbg().
Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankar.km@greenturtles.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 9fb7d6fa1d471338de747c0cdae015bde696f8df |
|
07-Nov-2011 |
Peter Huewe <peterhuewe@gmx.de> |
staging/comedi/contec: Convert pci_table entries to PCI_DEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 20fb2280815510533cbd7785b53821ca7209345b |
|
03-Jul-2010 |
Kulikov Vasiliy <segooon@gmail.com> |
Staging: comedi: use for_each_pci_dev()
Use for_each_pci_dev() to simplify the code.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 727b286b44ea359d66f47d241cc2cdad36ed7bdc |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_PCI_INITCLEANUP macro
Move the PCI devinit/devexit routines to the respective C source files
instead of calling COMEDI_PCI_INITCLEANUP
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90f703d30dd3e0c16ff80f35e34e511385a05ad5 |
|
06-Jun-2010 |
Arun Thomas <arun.thomas@gmail.com> |
Staging: comedi: Remove COMEDI_MODULES_MACRO
Add MODULE_AUTHOR, MODULE_LICENSE, and MODULE_DESCRIPTION calls
to the respective C source files instead of calling COMEDI_MODULES_MACRO
Signed-off-by: Arun Thomas <arun.thomas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 426054ce11ecb416048aa0f92628fa4ba93c3a0e |
|
26-Feb-2010 |
Andrea Gelmini <andrea.gelmini@gelma.net> |
Staging: comedi: contec_pci_dio.c: Checkpatch cleanup
WARNING: braces {} are not necessary for single statement blocks
+ if (dev->iobase) {
+ comedi_pci_disable(devpriv->pci_dev);
+ }
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0a85b6f0ab0d2edb0d41b32697111ce0e4f43496 |
|
08-Jun-2009 |
Mithlesh Thukral <mithlesh@linsyssoft.com> |
Staging: Comedi: Lindent changes to comdi driver in staging tree
Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.
Signed-off-by: Mithlesh Thukral <mithlesh@linsyssoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 5f74ea14c07fee91d3bdbaad88bff6264c6200e6 |
|
27-Apr-2009 |
Greg Kroah-Hartman <gregkh@suse.de> |
Staging: comedi: remove comedi-specific wrappers
There are a number of comedi "wrappers" for some RT functions that are
about to go away. This patch removes all of the wrapper calls within
the comedi drivers and core in order to prepare for removing the RT
comedi code.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 68c3dbff9fc9f25872408d0e95980d41733d48d0 |
|
23-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix the way structs are initialized.
Change from the foo: bar format to the .foo = bar format.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| da91b2692e0939b307f9047192d2b9fe07793e7a |
|
09-Apr-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: fix "foo * bar" should be "foo *bar"
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 216ed755f720eb4df79a184fbb13798831976adb |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove contec_model typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 4f4123ba6dba07ae20c7b6eb9ca5532c0cee8614 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove contec_private typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 72e7b74d505f901450e92d873dd3605a57435c1a |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove contec_board typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 0707bb04be89b18ee83b5a997e36cc585f0b988d |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_devconfig typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 90035c0886b256d75bced13b3b3cea5234aff136 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_insn typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| ea6d0d4cab4f4f2d6a88f3bce4707fe92696fd3f |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_cmd typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 139dfbdfacb02e3ef3df936d2fabd1ad5f14ea88 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_driver typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 34c43922e62708d45e9660eee4b4f1fb7b4bf2c7 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_subdevice typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 71b5f4f11971dea972832ad63a994c7e5b45db6b |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove comedi_device typedef
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| 790c55415aa31f4c732729f94d2c3a54f7d3bfc2 |
|
17-Mar-2009 |
Bill Pemberton <wfp5p@virginia.edu> |
Staging: comedi: Remove lsampl_t and sampl_t typedefs
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
| a613614545e5ab17b357b2e7954857920bf03436 |
|
18-Feb-2009 |
Stefano Rivoir <s.rivoir@gts.it> |
Staging: comedi: add contec_pci_dio driver
driver for Contec PIO1616L digital I/O board
From: Stefano Rivoir <s.rivoir@gts.it>
Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|