| d2182b69dcb6a68b1ef6070b2efd094e13dea3f1 |
|
15-Dec-2011 |
Joe Perches <joe@perches.com> |
ath: Convert ath_dbg(bar, ATH_DBG_<FOO>, to ath_dbg(bar, FOO
Add ATH_DBG_ to macros to shorten the uses and
reduce the line count.
Coalesce ath_dbg formats.
Add missing spaces to coalesced formats.
Add missing newline terminations to ath_dbg formats.
Align ath_dbg arguments where appropriate.
Standardize ath_dbg formats without periods.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| a261f0e965b7e903873880cec1a70c9cbc776c76 |
|
22-Nov-2011 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k_hw: Fix minimum CTL power for each runtime mode
The conformance test limits (CTL) for each regulatory domains
(FCC/ETSI/MKK) are programmed for each runtime modes (11B,11G,
HT20 and HT40) in EEPROM. The lowest ctledge power value of a
particular running mode should not be used while computing
ctledge power for a different running mode.(i.e 11G's min ctledge
power should not be used while computing ctledge power for HT20).
Currently, the code does not handle this properly which would
result in incorrect txpowers in certain cases. So reset the
twiceMaxEdgePower to the default while computing min ctlegepower
for every mode.
Cc: David Quan <dquan@qca.qualcomm.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 1b428a26a13732444ca4c16914e03cfe878b15f4 |
|
08-Oct-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove EEP_REG_1
It was previously used for current_rd_ext
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec |
|
08-Oct-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up tx power handling
The code for handling various restrictions concerning regulatory limits,
antenna gain, etc. is very convoluted and duplicated across various
EEPROM parsing implementations, making it hard to review.
This patch partially cleans up the mess by unifying regulatory limit
handling in one function and simplifying handling of antenna gain.
It also removes unused transmit power scaling arrays from the EEPROM code,
which belonged to an unimplemented API that isn't supposed to be in
the driver anyway.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| d7084da0ceeddb9caf84de20cf687bb4a9b842b1 |
|
15-Sep-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove dead code in the eeprom ops
The eeprom .set_addac function is only necessary for AR9160, remove it
from eeprom_4k.c and remove the dummy function from eeprom_9287.c
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 1b8714f7dcd8b41cd2843c42a6cc16ba2d4c899f |
|
15-Sep-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up hardware revision checks
- AR_SREV_5416_20_OR_LATER is always true, remove it
- AR_SREV_9280_20_OR_LATER is always true within eeprom_4k.c and eeprom_9287.c
- (AR_SREV_9271 || AR_SREV_9285) is always true in eeprom_4k.c
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| f3d4505de539f754b78d5c30e5d2cb41a0ed0117 |
|
03-Aug-2011 |
Marek Lindner <lindner_marek@yahoo.de> |
ath9k: remove eeprom txgain override for minor version < 19
ath9k_hw_4k_get_eeprom() overrides the eeprom value for txgain if the
minor version is not 19 or above with a value of 0.
ar9002_hw_init_mode_gain_regs() relies on this information to
determine whether this is a high power wifi card or not. The override
caused the driver to always use the 'normal' power tables even for
high power devices if their minor version was not high enough. Thus
leading to reduced power output.
This isn't needed for the AR9285; the check originated with the
AR9280 setup code which requires the EEPROM version check.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Adrian Chadd <adrian@freebsd.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 4f011a2e3746ae54622fe8ee55a2447d56177633 |
|
29-Jul-2011 |
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> |
ath9k_hw: Add dump_eeprom support for eeprom_4k
Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 071bfefd6849e9acc12ca26f4f897cd907e81d1b |
|
27-Jul-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: fix calculated runtime tx power limit
Use the previously calculated maximum of all rates instead of just the one
from the lowest rate of the selected PHY mode.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| e832bf1032f8279d7df712faa9aaab6ba897c2c5 |
|
27-Jul-2011 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove the tx power index offset
It is always 0
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 78fa99abd7a7ecfd7364e7b7198c9ecc27766855 |
|
16-Jul-2011 |
Pavel Roskin <proski@gnu.org> |
ath9k: use get_unaligned_{b16, le16, le32} where possible
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 5b68138e5659cbfd5df2879d17f9ba0b66477fec |
|
17-May-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k: Drag the driver to the year 2011
The Times They Are a-Changin'.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| d88525e8fdc00c0078d38353caffc29e5a9c70cc |
|
06-Apr-2011 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_hw: Fix instable target power control b/w CCK/OFDM
The problem is that when the attenuation is increased,
the rate will start to drop from MCS7 -> MCS6, and finally
will see MCS1 -> CCK_11Mbps. When the rate is changed b/w
CCK and OFDM, it will use register desired_scale to calculate
how much tx gain need to change.
The output power with the same tx gain for CCK and OFDM modulated
signals are different. This difference is constant for AR9280
but not AR9285/AR9271. It has different PA architecture
a constant. So it should be calibrated against this PA
characteristic.
The driver has to read the calibrated values from EEPROM and set
the tx power registers accordingly.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 04cf53f465049c7c509aac7b776f75d38ef68e69 |
|
04-Jan-2011 |
Sujith Manoharan <Sujith.Manoharan@atheros.com> |
ath9k_hw: Offload USB eeprom reading to target
For USB devices, reading the EEPROM data can be offloaded
to the target. Use multiple register reads to take advantage
of this feature to reduce initialization time.
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| df3c8b2b10b47429d2f3fe79d00daa38a3381aad |
|
12-Dec-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: remove antenna configuration eeprom ops and variables
AR9280 based hardware with 3 antennas and slow antenna diversity has
not been seen in the wild and ath9k does not support that form of
antenna diversity, so remove the EEPROM ops for it.
These EEPROM ops are currently only used for setting the
AR_PHY_SWITCH_COM register, which is being done in the EEPROM specific
file already.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 115277a3bc0683d04da797268ddafdc3bf67ca33 |
|
12-Dec-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: merge ath9k_hw_get_gain_boundaries_pdadcs between eeprom_def.c and eeprom_4k.c
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 4ddfcd7daf57247ff718b849a152d97a80b7ae4d |
|
12-Dec-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up duplicate and unnused eeprom related defines
AR*_MAX_RATE_POWER => MAX_RATE_POWER
AR*_EEPROM_MODAL_SPURS => AR_EEPROM_MODAL_SPURS
AR*_OPFLAGS_* => AR5416_OPFLAGS_*
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 226afe68fdbd1aa3680158aca0a3631cbd019626 |
|
03-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print to ath_dbg
Remove ath/debug.h and the includes of these files.
Coalesce long formats.
Correct a few misspellings and missing "\n"s from these logging messages.
Remove unnecessary trailing space before a newline.
Remove ARRAY_SIZE casts, use printf type %zu
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 3800276a40751539a920ef8e0537ef2e19126799 |
|
03-Dec-2010 |
Joe Perches <joe@perches.com> |
ath: Convert ath_print(.., ATH_DBG_FATAL to ath_err
So these errors are always emitted at KERN_ERR level.
Remove ARRAY_SIZE casts, use printf type %zu
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 07b2fa5a2368accf0fe6cb16e7eca6d1150554ed |
|
21-Nov-2010 |
Joe Perches <joe@perches.com> |
ath9k: Use static const
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.
text data bss dec hex filename
11161 56 2136 13353 3429 drivers/net/wireless/ath/ath9k/ar9003_paprd.o.new
11167 56 2136 13359 342f drivers/net/wireless/ath/ath9k/ar9003_paprd.o.old
15428 56 3056 18540 486c drivers/net/wireless/ath/ath9k/eeprom_4k.o.old
15451 56 3056 18563 4883 drivers/net/wireless/ath/ath9k/eeprom_4k.o.new
14087 56 2560 16703 413f drivers/net/wireless/ath/ath9k/eeprom_9287.o.old
14036 56 2560 16652 410c drivers/net/wireless/ath/ath9k/eeprom_9287.o.new
10041 56 2384 12481 30c1 drivers/net/wireless/ath/ath9k/ani.o.new
10088 56 2384 12528 30f0 drivers/net/wireless/ath/ath9k/ani.o.old
9316 1580 2304 13200 3390 drivers/net/wireless/ath/ath9k/htc_drv_init.o.new
9316 1580 2304 13200 3390 drivers/net/wireless/ath/ath9k/htc_drv_init.o.old
16483 56 3432 19971 4e03 drivers/net/wireless/ath/ath9k/ar9003_phy.o.new
16517 56 3432 20005 4e25 drivers/net/wireless/ath/ath9k/ar9003_phy.o.old
18221 104 2960 21285 5325 drivers/net/wireless/ath/ath9k/rc.o.old
18203 104 2960 21267 5313 drivers/net/wireless/ath/ath9k/rc.o.new
19985 56 4288 24329 5f09 drivers/net/wireless/ath/ath9k/eeprom_def.o.new
20040 56 4288 24384 5f40 drivers/net/wireless/ath/ath9k/eeprom_def.o.old
23997 56 4984 29037 716d drivers/net/wireless/ath/ath9k/ar5008_phy.o.old
23846 56 4984 28886 70d6 drivers/net/wireless/ath/ath9k/ar5008_phy.o.new
24285 56 3184 27525 6b85 drivers/net/wireless/ath/ath9k/ar9003_eeprom.o.old
24101 56 3184 27341 6acd drivers/net/wireless/ath/ath9k/ar9003_eeprom.o.new
6834 56 1032 7922 1ef2 drivers/net/wireless/ath/ath9k/ar9002_phy.o.old
6780 56 1032 7868 1ebc drivers/net/wireless/ath/ath9k/ar9002_phy.o.new
36211 64 8624 44899 af63 drivers/net/wireless/ath/ath9k/hw.o.new
36401 64 8624 45089 b021 drivers/net/wireless/ath/ath9k/hw.o.old
9281 56 1496 10833 2a51 drivers/net/wireless/ath/ath9k/ar9003_calib.o.old
9150 56 1496 10702 29ce drivers/net/wireless/ath/ath9k/ar9003_calib.o.new
Use ARRAY_SIZE instead of a magic number.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| de40f316c01b1ba9535e6dc99f6a67e7655b07da |
|
20-Oct-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: extend ath9k_hw_set_txpowerlimit to test channel txpower
ath9k_hw_set_txpowerlimit gets an extra boolean parameter that - if set -
causes the rate txpower table and the regulatory limit to be calculated
and stored, without changing hardware registers.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 435c1610f46dc4d86a6633adb037b18109e6ffdc |
|
05-Oct-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: clean up register write buffering
Throughout the code, DISABLE_REGWRITE_BUFFER is always called right after
REGWRITE_BUFFER_FLUSH. Since that's unlikely to change any time soon, that
makes keeping those ops separate rather pointless, as it only increases
code size and line number counts.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 970bf9d40c03e48cc34ee2c1a70693a0e0fca3f6 |
|
05-Oct-2010 |
Gabor Juhos <juhosg@openwrt.org> |
ath9k: get correct tx gain type in ath9k_hw_4k_get_eeprom
The base_eep_header_4k structure contains information that the
device supports high power tx gain table or not. However the
ath9k_hw_4k_get_eeprom function does not return that value when
it is called with EEP_TXGAIN_TYPE. This leads to that the tx gain
initialization will use the init values from the original tx gain
table even if the device inidicates that the high power table
should be used.
Changes-licensed-under: ISC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Shu Hwa Shen <shensh@zcomm.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| e17f83eafd37129f9e09425136e59bc4333bdb9c |
|
22-Sep-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: simplify revision checks for AR9285
Since AR9285 v1.0 and v1.1 were never sold (and the initvals removed),
its revision checks can be simplified similar to AR9280
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 7a37081e2e25e58701b17c41579fd06bc353b392 |
|
22-Sep-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: simplify revision checks for AR9280
Since AR9280 v1.0 was never sold (and the initvals removed), v1.0 specific
revision checks can be removed and the 'v2.0 or later' check can be
simplified to a check for AR9280 or later.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| f799a301abf77b87133d624164d28dc2b521e99d |
|
16-Sep-2010 |
Rajkumar Manoharan <rmanoharan@atheros.com> |
ath9k_hw: remove warning in ath9k_hw_def_get_num_ant_config
This patch fixes following warning
drivers/net/wireless/ath/ath9k/eeprom_def.c: In function 'ath9k_hw_def_get_num_ant_config'
drivers/net/wireless/ath/ath9k/eeprom_def.c:1425:47: warning: comparison
between 'enum ath9k_hal_freq_band' and 'enum ieee80211_band'
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 754dc53641e0038cd4fd3574b1f5b3c7239f73ce |
|
02-Sep-2010 |
Vasanthakumar Thiagarajan <vasanth@atheros.com> |
ath9k_hw: Add capability flag for Antenna diversity and combining feature
This is enabled only for ar9285.
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 6eb90d46c59a75ceeccfef7c6c6705fb64b593dc |
|
06-Jul-2010 |
Pavel Roskin <proski@gnu.org> |
ath9k: remove unneeded calculation of minimal calibration power
Remove tMinCalPower from ath9k_hw_set_def_power_cal_table(), as it's
never used. Remove corresponding arguments of the functions calculating
that value.
Original patch by Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 601e0cb165e65dc185b31fe7ebd2c0169ea47306 |
|
11-Jul-2010 |
Felix Fietkau <nbd@openwrt.org> |
ath9k_hw: fix antenna diversity on AR9285
On AR9285, the antenna switch configuration register uses more than just
16 bits. Because of an arbitrary mask applied to the EEPROM value that
stores this configuration, diversity was broken in some cases, leading
to a significant degradation in signal strength.
Fix this by changing the callback to return a 32 bit value and remove
the arbitrary mask.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| a5fdbcad0a3f461d43f7b801f8fc176cd2840704 |
|
27-May-2010 |
Prarit Bhargava <prarit@redhat.com> |
ath: Fix uninitialized variable warnings
Fixes 'make -j24 CONFIG_DEBUG_SECTION_MISMATCH=y' warning:
drivers/net/wireless/ath/ath9k/eeprom_4k.c: In function ‘ath9k_hw_get_4k_gain_boundaries_pdadcs.clone.1’:
drivers/net/wireless/ath/ath9k/eeprom_4k.c:311: error: ‘minPwrT4’ may be used uninitialized in this function
drivers/net/wireless/ath/ath9k/eeprom_9287.c: In function ‘ath9k_hw_get_AR9287_gain_boundaries_pdadcs’:
drivers/net/wireless/ath/ath9k/eeprom_9287.c:302: error: ‘minPwrT4’ may be used uninitialized in this function
drivers/net/wireless/ath/ath9k/eeprom_def.c: In function ‘ath9k_hw_get_def_gain_boundaries_pdadcs.clone.0’:
drivers/net/wireless/ath/ath9k/eeprom_def.c:679: error: ‘minPwrT4’ may be used uninitialized in this function
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 7d0d0df0eca695c83a08dc386824a9d1d7c526a4 |
|
16-Apr-2010 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k_hw: Use buffered register writes
This patch adds macros at certain places
which could be optimized for multiple register writes.
The performance of ath9k_htc improves considerably,
especially reducing the latency involved in a scan run.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 49101676b2f1a66e0043509423e876414c73b5aa |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: restore mac address reading logic
Once upon a time the AR_EEPROM_MAC macro was added to let us
add a random attribute to the three 4-bytes of MAC addresses
entries we read from the EEPROM. This was good while a random
high-enough value was used which did not conflict with any
of the already existing enum eeprom_param values. With AR9003
support the enums overlap and it means we either increment
the random offset or just restore the reading logic to match
what the HAL has. I choose to do the later to synchronize
the logic on both code bases.
This should fix reading the MAC address from the EEPROM
on AR9003 hardware.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 8fe6536850ae49609704a263cbc7542133536922 |
|
15-Apr-2010 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: Move some RF ops to the private callbacks
The PHY split is easier done in a few steps. First move
the RF ops to the private ops and rename them accordingly.
We split PHY stuff up first for the AR5008 and AR9002
families. There are some callbacks that AR9002 share
with the AR5008 familiy so we set those first, if AR9002
has some different callbacks it will override them upon
hardware init.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 60ece4047e4870c7be28dcf661162d8312c161e7 |
|
24-Mar-2010 |
Frans Pop <elendil@planet.nl> |
wireless/ath: remove trailing space in messages
Signed-off-by: Frans Pop <elendil@planet.nl>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 0cab6559f878f328906949c5c20cbbc411cddeb7 |
|
19-Oct-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k_hw: modify the rf control register for ar9271 revision 1.0
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| e41f0bfcb130d9f17cf5ee8e46d739c1bebda963 |
|
18-Sep-2009 |
Senthil Balasubramanian <senthilkumar@atheros.com> |
ath9k: Fix bugs in handling TX power
* Get power table offset from the EEPROM instead of using
a hardcoded value of -5 if the EEPROM rev is >= 21.
* Add support in the 4k eeprom code for tx power offset
in case we have a 4k AR9280 implementation.
* Fix tx power accuracy at high powers.
Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 5bb127913299b37fceecf66ce86ee8ede70e7d13 |
|
14-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: move bus ops to ath_common
This is the last part to make ath9k hw code core driver agnostic.
I believe ath9k_htc can now use use the hw code unmodified.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| cfe8cba982cda73d4970dab712411bebdcc3b9cd |
|
14-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: clarify what hw code is and remove ath9k.h from a few files
hw code will be shared between ath9k and ath9k_htc.
Just a few more files are left to clean up, mark them as well.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| c46917bb53a546f60c7d3103407fe953c418dd5b |
|
13-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
atheros: add common debug printing
ath9k uses this for now, ath9k_htc is expected to re-use this
as well. We lave ath5k as is, but it certainly can also be
converted later.
The ath9k module parameter and debugfs entry is kept.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 4d6b228d84ba992ee13c90312c1ed539191c94b1 |
|
07-Sep-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath9k: use ath_hw for DPRINTF() and debug init/exit
DPRINTF() is used in hw specific related code, as such
ensure we don't rely on the private driver core ath_softc
struct when calling it. Drivers can then implement their
own DPRINTF() as they see fit.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 608b88cb34b0e70a538ee1fc334cc833ef691836 |
|
18-Aug-2009 |
Luis R. Rodriguez <lrodriguez@atheros.com> |
ath: move regulatory info into shared common structure
This moves the shared regulatory structure into the
common structure. We will use this ongoing for common
data.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 180d674bab10ce10747f7bc7214462da185431bd |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Remove local chainmask variable
The chainmask can be obtained directly from ath_hw.
Also, use a helper macro for comparing CTLs - this improves readability.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| bf466fb67c8e0559ba1875232b03ee8dee32ae09 |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Cleanup TX power calculation for 4K chips
Write CCK power-per-rate array always and report
correct TX power to regulatory.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| 7f63845f2a5f54c64968a4221561c619468b8a54 |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Clean antenna configuration for 4K EEPROM chips
This patch revamps the antenna configuration mechanism
for 4K chips.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| a37414a220990614de376a155e23dfed471efbdc |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Cleanup ath9k_hw_4k_set_gain() interface
regChainOffset is always zero, remove it.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|
| b5aec950eeb433d4850c1e5fcf14b666048e647d |
|
07-Aug-2009 |
Sujith <Sujith.Manoharan@atheros.com> |
ath9k: Split eeprom.c into manageable pieces
Add eeprom_def.c, eeprom_4k.c and eeprom_9287.c
This improves maintainability.
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
/drivers/net/wireless/ath/ath9k/eeprom_4k.c
|