| 92fe173391b3e0d0a7212fa8b9d72c8d61f31c26 |
|
12-Apr-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: issues in Sx on 82577/8/9
A workaround was previously put in the driver to reset the device when
transitioning to Sx in order to activate the changed settings of the PHY
OEM bits (Low Power Link Up, or LPLU, and GbE disable configuration) for
82577/8/9 devices. After further review, it was found such a reset can
cause the 82579 to confuse which version of 82579 it actually is and broke
LPLU on all 82577/8/9 devices. The workaround during an S0->Sx transition
on 82579 (instead of resetting the PHY) is to restart auto-negotiation
after the OEM bits are configured; the restart of auto-negotiation
activates the new OEM bits as does the reset. With 82577/8, the reset is
changed to a generic reset which fixes the LPLU bits getting set wrong.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 3d3a1676561cfb0dcef0cf5e146ddefbb16f5598 |
|
23-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup whitespace and indentation
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| e85e36390c55230975f842ed5b14aad6ab490059 |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: rename e1000e_reload_nvm() and call as function pointer
Rename e1000e_reload_nvm() to e1000e_reload_nvm_generic() to signify the
function is used for more than one MAC-family type, and set and use it as a
MAC ops function pointer to be consistent with the driver design.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 57cde7630c1911ea7e8e1561cccfde8096e8bcc7 |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: rename e1000e_config_collision_dist() and call as function pointer
Rename e1000e_config_collision_dist() to
e1000e_config_collision_dist_generic() to signify the function is used for
more than one MAC-family type, and set and use it as a MAC ops function
pointer to be consistent with the driver design.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 6e3c807504a573aba1ff5aad99e235d04ac72269 |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: comment correction in e1000e_set_kmrn_lock_loss_workaround_ich8lan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 944ce011cfc0b261b74c36e2c1c2e725c72c72ac |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup calls to setup_physical_interface function pointer
Call the MAC ops setup_physical_interface function pointer instead of the
MAC-family-specific function to conform to the rest of the driver design.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 44abd5c12767a8c567dc4e45fd9aec3b13ca85e0 |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup use of check_reset_block function pointer
Replace e1000_check_reset_block() inline function with calls to the PHY ops
check_reset_block function pointer.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 1a46b40fbb1dfd698efbc7a9575aa64aed04d568 |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: rename e1000e_setup_link() and call as function pointer
Rename e1000e_setup_link() to e1000e_setup_link_generic() to signify the
function is used for more than one MAC-family type. The 82571-family has
a custom setup_link function which also calls the generic function. The
ich8lan-family has a custom function which should just be called via the
function pointer. The 80003es2lan-family just uses the generic function.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| d1964eb138901286a170de8ed422efd227dd4daf |
|
22-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: rename e1000e_id_led_init() and call as function pointer
Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the
function is used for more than one MAC-family type. For the ich8lan MAC
family, some MACs use the generic function and others use the function
e1000_id_led_init_pchlan(). In all cases where e1000e_id_led_init() was
called directly, change to call the function pointer to be consistent with
the driver design.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 5015e53a4cf0c88977120faede7eb02b0459d90e |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup goto statements to exit points without common work
Per ./Documentation/CodingStyle, goto statements are acceptable for the
centralized exiting of functions when there are multiple exit points which
share common work such as cleanup. When no common work is required for
multiple exit points, the function should just return at these exit points
instead of doing an unnecessary jump to a centralized return. This patch
cleans up the inappropriate use of goto statements, and removes unnecessary
variables (or move to a smaller scope) where possible as a result of the
cleanups.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| e561a705a61e8d4c32a1259c611703a3976347aa |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: potentially incorrect return for e1000_init_hw_ich8lan
In the unlikely event that e1000_setup_link_ich8lan() returns an error,
the returned error code value is not propagated to the caller of
e1000_init_hw_ich8lan().
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 3fa82936347bba431f147e23c788f6364c3e5b36 |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: minor whitespace addition (insert blank line separator)
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| f71dde6a44c6f817a104ab8a95a2eeabac5614df |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: remove unnecessary variable initializations
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 55920b5eae24cfd2666f3f80bc5f2c0b3b18043b |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: remove unnecessary variable ret_val
ret_val gets initialized to -E1000_ERR_NVM and never set differently, so
get rid of it and just return -E1000_ERR_NVM.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| f1a3fe17f9ef0e51c63662b82e9915a693e8e375 |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: remove unreachable statement
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| d7eb33840bee3c8de3f64f3861350bcfac3eaf82 |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lan
In the unlikely event that e1e_wphy() returns an error, the returned error
code is not propogated to the caller of e1000_set_d3_lplu_state_ich8lan().
With this change, there is a rare possibility that ret_val might not get
set so it must be initialized.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 826072555b0dceac44a6e69a0c5be137e829c9d4 |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: always return 0
These are a few instances of returning a value that can only be 0 so just
use a 'return 0' to make it more obvious.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 75ce15327030128d713079d1f5e23cbe7af532f6 |
|
08-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup: rename goto labels to be more meaningful
In the following functions, rename the generic 'out' goto label to the more
descriptive 'release' to indicate the type of common work that is done
before exiting the functions. No functional change, cosmetic only.
e1000_sw_lcd_config_ich8lan()
e1000_oem_bits_config_ich8lan()
e1000_init_phy_wakeup()
e1000e_write_phy_reg_bm()
e1000e_read_phy_reg_bm()
e1000e_read_phy_reg_bm2()
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| ec34c170da8798f521f0d40cad54580ff93cea3a |
|
01-Feb-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX()
The e1000_init_mac_params_XXX() functions (where XXX is one of the three
MAC-family types 80003es2lan, 82571 and ich8lan) was not meant to require a
pointer to the adapter struct but does require a pointer to the hw struct.
Pass that pointer in to the functions instead.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| fe1e980f24697edb7d4e17cd74bbeae4a0388525 |
|
31-Jan-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: remove unnecessary returns from void functions
...and convert some goto's which simply return to just return.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 0e15df490eef6f5080b84533dcd3068a78122768 |
|
31-Jan-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: minor whitespace and indentation cleanup
Cleanup of some whitespace and indentation of a single code block.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 9e2d7657e2a8fb40f732563dffb05151ea2d7e01 |
|
31-Jan-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: cleanup - check return values consistently
The majority of the e1000e code checks most function return values using a
test like 'if (ret_val)' or 'if (!ret_val)' but there are a few instances
of 'if (ret_val == 0)'. This patch converts the latter to the former for
consistency.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| f5e261e626eb3fe07adf484aaad2ecfc757feba3 |
|
01-Jan-2012 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: update copyright year
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| c8243ee0488d9bc12995ca7ea02f651db820622e |
|
17-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: call er16flash() instead of __er16flash()
__er16flash() is not meant to be called directly.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 434f1392ae3a3934a33d2d16987d857c97951c3d |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: concatenate long debug strings which span multiple lines
To ease searching for debug message strings, concatenate strings that span
multiple lines even if the resulting line exceeds 80 columns; these will
not cause checkpatch warnings.
Also, add '\n' and remove unnecessary '\r' from a few debug strings.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 464c85e37e6b2d2ad4f3bea23a59408c5595db15 |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: conditionally restart autoneg on 82577/8/9 when setting LPLU state
When setting the Low Power Link Up (LPLU, a.k.a. reverse auto-negotiation)
on 82577/8278/82579, do not restart auto-negotiation if reset of the Phy is
blocked by the Manageability Engine.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 7f1557e1422a4cc842af641c6716714751c06865 |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: increase Rx PBA to prevent dropping received packets on 82566/82567
During bi-directional stress on some 82566/82567 devices, some received
packets were dropped. Increasing the Receive Packet Buffer Allocation
resolves this.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| c077a9065b8d4612e4d55bd53c3563ca10d5c944 |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: ICHx/PCHx LOMs should use LPLU setting in NVM when going to Sx
When going to Sx with an ICHx/PCH device, the default Low Power Link Up
(LPLU, a.k.a. reverse auto-negotiation) behavior should be whatever is set
in the NVM. However, the function e1000_suspend_workarounds_ich8lan()
called when going to Sx always enabled LPLU in all power states.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 90b82984a4ce689d7b1d7132e50bc61ac6f8b74f |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: update workaround for 82579 intermittently disabled during S0->Sx
The workaround which toggles the LANPHYPC (LAN PHY Power Control) value bit
to force the MAC-Phy interconnect into PCIe mode from SMBus mode during
driver load and resume should always be done except if PHY resets are
blocked by the Manageability Engine (ME). Previously, the toggle was done
only if PHY resets are blocked and the ME was disabled.
The rest of the patch is just indentation changes as a consequence of the
updated workaround.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 79d4e9087a6ecd6bf2103bf378bf8e0d79278b5a |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: disable Early Receive DMA on ICH LOMs
Internal stress testing with jumbo frames shows the reliability of ICH9 and
ICH10D devices is improved in certain corner cases by disabling the Early
Receive feature. To reduce the performance impact caused by disabling this
feature, the packet buffer sizes and relevant flow control settings are
modified accordingly.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 4d24136c8ea03ecfdb6b8256571da8b520b92d8b |
|
16-Dec-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: 82579: workaround for link drop issue
When connected to certain switches, the 82579 PHY might drop link
unexpectedly. Work around the issue by setting the Mean Square Error
higher than the hardware default.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 34c9ef8bc66e21bdecb215b2fb7d93092468d27d |
|
21-Oct-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: demote a debugging WARN to a debug log message
This debugging message was recently added but it does not need to be as
alarming as a WARN.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| a90b412cb8c7ccc1689f9ea130883d00a1f0a5bb |
|
07-Oct-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: locking bug introduced by commit 67fd4fcb
Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update
statistics more accurately and on-demand through the net_device_ops
.ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when
linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and
CONFIG_PROVE_LOCKING=y). The commit introduced code paths that caused a
mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when
irqbalance reads the stats from /sys/class/net/ethX/statistics causing the
mutex to be locked to read the Phy half-duplex statistics registers.
The mutex was originally introduced to prevent concurrent accesses of
resources (the NVM and Phy) shared by the driver, firmware and hardware
a few years back when there was an issue with the NVM getting corrupted.
It was later split into two mutexes - one for the NVM and one for the Phy
when it was determined the NVM, unlike the Phy, should not be protected by
the software/firmware/hardware semaphore (arbitration of which is done in
part with the SWFLAG bit in the EXTCNF_CTRL register). This latter
semaphore should be sufficient to prevent resource contention of the Phy in
the driver (i.e. the mutex for Phy accesses is not needed), but to be sure
the mutex is replaced with an atomic bit flag which will warn if any
contention is possible.
Also add additional debug output to help determine when the sw/fw/hw
semaphore is owned by the firmware or hardware.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Reported-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
|
| b64e9dd5d04561c2cee7e9d9d70bd6d45cc01e7c |
|
30-Sep-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: bad short packets received when jumbos enabled on 82579
When short packets are received with jumbos enabled on 82579, they can be
interpreted to have a receive address that does not match any configured
address. This is due to a hardware bug that can be worked around by
reducing the number of IPG octets added when the packet is transferred from
the PHY to the MAC.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 462d599449c1047259ec56bfdcca4f55f7a93038 |
|
30-Sep-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: WoL fails on device ID 0x1501
PCI device ID 0x1501 has a hardware bug when the link downshifts for
whatever reason which requires a workaround. The workaround already exists
for other similar devices but is not called for 0x1501 (it should be called
for any ICH8-based device that uses a GbE PHY). There is also one other
instance when the workaround should be called - after disabling gigabit
speed when going to Sx.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 03299e46c9e857b885bf66c47bebc1bcac5dba55 |
|
30-Sep-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: WoL can fail on 82578DM
During suspend, the PHY must be reset for workaround updates to take effect
without restarting auto-negotiation. Also, set the disable GbE and enable
Low Power Link Up (LPLU) if the EEPROM is configured to do likewise in
either D0 or non-D0a instead of just the latter.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| 8ce9d6c725b01989d2b18ee1df853837388ceaf6 |
|
24-Sep-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
e1000e: make function tables const
The initial function and setup tables can be marked as constant.
Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
|
| dc221294719ae0f28cc260cc37edd439161088a9 |
|
19-Aug-2011 |
Bruce Allan <bruce.w.allan@intel.com> |
e1000e: convert to netdev features/hw_features API
Private rx_csum flags are now duplicate of netdev->features &
NETIF_F_RXCSUM. Remove those duplicates and use the net_device_ops
ndo_set_features. This is based on the original patch submitted by
Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
| dee1ad47f2ee75f5146d83ca757c1b7861c34c3b |
|
07-Apr-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
intel: Move the Intel wired LAN drivers
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|