Searched defs:on (Results 251 - 265 of 265) sorted by relevance

<<11

/drivers/net/wireless/iwlegacy/
H A Dcommon.c470 * Adjust led blink rate to compensate on a MAC Clock difference on every HW
471 * Led blink rate analysis showed an average deviation of 0% on 3945,
472 * 5% on 4965 HW.
473 * Need to compensate on the led on/off time per HW according to the deviation
494 il_led_cmd(struct il_priv *il, unsigned long on, unsigned long off) argument
505 if (il->blink_on == on && il->blink_off == off)
510 on = IL_LED_SOLID;
515 led_cmd.on
535 unsigned long on = 0; local
[all...]
H A Dcommands.h303 /* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
501 * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
644 * table and txpower table before transmitting anything on the RXON
692 * specific rxon cmd, depending on where it is called from.
933 * with info on security keys, aggregation parameters, and Tx rates for
943 * new station table before transmitting anything on the RXON channel
947 * When getting started on a new channel, driver must set up the
1191 * The actual offsets of the hdr and end are dynamic based on
1225 __le64 timestamp; /* TSF at on air rise */
1226 __le32 beacon_time_stamp; /* beacon at on
3328 u8 on; /* # intervals on while blinking; member in struct:il_led_cmd
[all...]
/drivers/platform/x86/
H A Dsony-laptop.c10 * The SNY6001 driver part is based on the sonypi driver which includes
874 * on input validate boolean values 0/1, on output just pass the
1405 /* Try to turn the light on/off immediately */
2357 pr_warn("failed to power on camera\n");
2582 static int sonypi_misc_fasync(int fd, struct file *filp, int on) argument
2584 return fasync_helper(fd, filp, on, &sonypi_compat.fifo_async);
2595 /* Flush input queue on first open */
3000 * Based on drivers/acpi/pci_link.c:acpi_pci_link_set
/drivers/tty/
H A Dsynclink_gt.c250 int port_count; /* count of ports on adapter */
254 /* array of pointers to port contexts on this adapter */
699 /* 1st open on this device, init hardware */
820 * based on data in buffers (tbuf_bytes) and FIFO (128 bytes)
1141 * support for 32 bit ioctl calls on 64 bit systems
2544 * reconfigure adapter based on new parameters
3258 static void dtr_rts(struct tty_port *port, int on) argument
3264 if (on)
3587 * allocate device instance structure, return NULL on failure
3627 info->init_error = -1; /* assume error, set to 0 on successfu
[all...]
H A Dsynclinkmp.c455 * .text section address and breakpoint on module load.
643 * 1=release after 1 xfer on all channels
768 /* 1st open on this device, init hardware */
1045 /* Make sure transmit interrupts are on */
2483 (status & SerialSignal_DCD) ? "on" : "off");
2758 /* Reconfigure adapter based on new parameters
3271 static void dtr_rts(struct tty_port *port, int on) argument
3277 if (on)
3389 // *must* be in the same 64K block. All descriptors on a port
3785 /* Because veremap only works on pag
[all...]
H A Dsynclink.c838 /* set non-zero on successful registration with PCI subsystem */
849 * .text section address and breakpoint on module load.
1128 printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
1146 printk( "%s(%d):mgsl_bh_status() entry on %s\n",
1351 (status & MISCSTATUS_DCD) ? "on" : "off");
1846 /* on the ISA adapter. This has no effect for the PCI adapter */
1851 /* on the ISA adapter. This has no effect for the PCI adapter */
1904 /* Reconfigure adapter based on new parameters
2023 printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
2062 printk( "%s(%d):mgsl_flush_chars() entry on
3241 dtr_rts(struct tty_port *port, int on) argument
[all...]
/drivers/gpu/drm/i915/
H A Dintel_display.c49 static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
470 * Returns whether any output on the specified pipe is of the specified type
511 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
534 * For LVDS, if the panel is on, just rely on its current
622 /* based on hardware requirement, prefer smaller n to precision */
624 /* based on hardware requirement, prefere larger m1,m2 */
710 * intel_wait_for_vblank - wait for vblank on a given pipe
714 * Wait for vblank to occur on a given pipe. Needed for various bits of
730 * should *not* be performing page flips and thus not waiting on
6408 intel_crtc_update_cursor(struct drm_crtc *crtc, bool on) argument
[all...]
/drivers/infiniband/hw/qib/
H A Dqib_iba7220.c200 /* wait for TS1, then go on */
214 * on opteron (the northbridge always generates 2 separate HT 32 bit reads),
226 * Returns -1 on errors (not distinguishable from valid contents at
470 #define IBA7220_LEDBLINK_ON_SHIFT 32 /* 4ns period on after packet */
471 #define IBA7220_LEDBLINK_OFF_SHIFT 0 /* 4ns period off before next on */
964 * print * it or not depending on "normal packet errors" vs everything
1060 * get stuck if we are unlucky on timing on both sides of
1253 * even though the details are similar on most chips.
1276 * force of re-interrupt on pendin
1727 qib_setup_7220_setextled(struct qib_pportdata *ppd, u32 on) argument
[all...]
H A Dqib_iba7322.c348 * number of hdrq updates to one per flow (or on errors).
351 * on kernel contexts, we don't worry about that (we initialize
352 * those entries for ctxt 0/1 on driver load twice, for example).
600 * errors and linkrecovery errors. They can be reported on
666 /* wait for TS1, then go on */
692 * Returns -1 on errors (not distinguishable from valid contents at
713 * Returns -1 on errors (not distinguishable from valid contents at
1476 /* Commit writes to memory and advance the tail on the chip */
1697 * get stuck if we are unlucky on timing on bot
2502 qib_setup_7322_setextled(struct qib_pportdata *ppd, u32 on) argument
[all...]
/drivers/net/wireless/bcmdhd/
H A Ddhd_sdio.c127 /* Bump up limit on waiting for HT to account for first startup;
278 bool rxflow; /* Is rx flow control on */
318 uint rx_hdrfail; /* SDIO errors on header reads */
322 uint fc_xoff; /* Number which turned on flow-control */
403 /* Force even SD lengths (some host controllers mess up on odd bytes) */
427 /* Limit on rounding up frames */
746 dhdsdio_clk_kso_enab(dhd_bus_t *bus, bool on) argument
752 KSO_DBG(("%s> op:%s\n", __FUNCTION__, (on ? "KSO_SET" : "KSO_CLR")));
754 wr_val |= (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
758 if (on) {
796 dhdsdio_clk_kso_iovar(dhd_bus_t *bus, bool on) argument
871 dhdsdio_clk_devsleep_iovar(dhd_bus_t *bus, bool on) argument
1005 dhdsdio_htclk(dhd_bus_t *bus, bool on, bool pendok) argument
1153 dhdsdio_sdclk(dhd_bus_t *bus, bool on) argument
[all...]
/drivers/net/wireless/brcm80211/brcmfmac/
H A Ddhd_sdio.c52 __le32 buf; /* Can't be pointer on (64-bit) hosts */
96 #define TXHI (TXQLEN - 256) /* turn on flow control above TXHI */
297 /* Bump up limit on waiting for HT to account for first startup;
529 bool rxflow; /* Is rx flow control on */
540 uint rx_hdrfail; /* SDIO errors on header reads */
544 uint fc_xoff; /* Number which turned on flow-control */
606 /* Limit on rounding up frames */
630 * adresses on the 32 bit backplane bus.
684 /* Turn backplane clock on or off */
685 static int brcmf_sdbrcm_htclk(struct brcmf_sdio *bus, bool on, boo argument
806 brcmf_sdbrcm_sdclk(struct brcmf_sdio *bus, bool on) argument
[all...]
/drivers/net/ethernet/sun/
H A Dniu.c214 static void niu_ldg_rearm(struct niu *np, struct niu_ldg *lp, int on) argument
218 if (on)
224 static int niu_ldn_irq_enable(struct niu *np, int ldn, int on) argument
241 if (on)
250 static int niu_enable_ldn_in_ldg(struct niu *np, struct niu_ldg *lp, int on) argument
261 err = niu_ldn_irq_enable(np, i, on);
268 static int niu_enable_interrupts(struct niu *np, int on) argument
276 err = niu_enable_ldn_in_ldg(np, lp, on);
281 niu_ldg_rearm(np, &np->ldg[i], on);
2671 static int niu_enable_alt_mac(struct niu *np, int index, int on) argument
2875 tcam_enable(struct niu *np, int on) argument
2902 tcam_user_eth_class_enable(struct niu *np, unsigned long class, int on) argument
2945 tcam_user_ip_class_enable(struct niu *np, unsigned long class, int on) argument
3139 fflp_llcsnap_enable(struct niu *np, int on) argument
3150 fflp_errors_enable(struct niu *np, int on) argument
4625 niu_txc_enable_port(struct niu *np, int on) argument
4656 niu_txc_port_dma_enable(struct niu *np, int on) argument
4900 niu_enable_rx_channel(struct niu *np, int channel, int on) argument
5728 niu_enable_tx_xmac(struct niu *np, int on) argument
5739 niu_enable_tx_bmac(struct niu *np, int on) argument
5750 niu_enable_tx_mac(struct niu *np, int on) argument
5758 niu_enable_rx_xmac(struct niu *np, int on) argument
5777 niu_enable_rx_bmac(struct niu *np, int on) argument
5796 niu_enable_rx_mac(struct niu *np, int on) argument
7858 niu_force_led(struct niu *np, int on) argument
[all...]
/drivers/net/wireless/brcm80211/brcmsmac/
H A Dmain.c239 /* Max # of entries in Tx FIFO based on 4kb page size */
241 /* Max # of entries in Rx FIFO based on 4kb page size */
386 * cause SB error if aphy is in reset on 4306B0-DB. Need a simple accessible
1072 /* prohibit use of slowclock on multifunction boards */
1226 * on backplane, but mac core will still run on ALP(not HT) when
1228 * set. Should wakeup mac if driver wants it to run on HT.
1278 * keep the ucode wake bit on if forcefastclk is on since we
1365 /* IHR accesses are always enabled, PSM disabled, HPS off and WAKE on */
2793 brcms_b_core_phypll_ctl(struct brcms_hardware *wlc_hw, bool on) argument
3778 brcms_c_txflowcontrol_signal(struct brcms_c_info *wlc, struct brcms_txq_info *qi, bool on, int prio) argument
[all...]
/drivers/net/wireless/brcm80211/brcmsmac/phy/
H A Dphy_n.c20370 void wlc_phy_switch_radio_nphy(struct brcms_phy *pi, bool on) argument
20372 if (on) {
/drivers/net/wireless/iwlwifi/
H A Diwl-commands.h269 /* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
430 u32 lmpm_pmg_sel; /* indicate which clocks are turned on
575 * table and txpower table before transmitting anything on the RXON
650 * @rxon_flags: Rx on flags
671 * @rxon_flags: Rx on flags
850 * with info on security keys, aggregation parameters, and Tx rates for
859 * new station table before transmitting anything on the RXON channel
863 * When getting started on a new channel, driver must set up the
967 * operate on single or multiple queues, the command queue can't be flushed by
1080 __le64 timestamp; /* TSF at on ai
3231 u8 on; /* # intervals on while blinking; member in struct:iwl_led_cmd
[all...]

Completed in 1360 milliseconds

<<11