/drivers/staging/media/go7007/ |
H A D | go7007-driver.c | 305 * Store a byte in the current video buffer, if there is one. 307 static inline void store_byte(struct go7007_buffer *gobuf, u8 byte) argument 313 *((u8 *)page_address(gobuf->pages[pgidx]) + pgoff) = byte;
|
/drivers/net/can/ |
H A D | mcp251x.c | 196 #define GET_BYTE(val, byte) \ 197 (((val) >> ((byte) * 8)) & 0xff) 198 #define SET_BYTE(val, byte) \ 199 (((val) & 0xff) << ((byte) * 8))
|
/drivers/net/irda/ |
H A D | donauboe.c | 182 /* Set the DMA to be byte at a time */ 594 /*Enable DMA controller in byte mode and RX */ 636 xbofs=xbofs/80000; /*Eight bits per byte, and mtt is in us*/ 681 stuff_byte (__u8 byte, __u8 * buf) argument 683 switch (byte) 690 buf[1] = byte ^ IRDA_TRANS; /* Complement bit 5 */ 695 buf[0] = byte;
|
H A D | w83977af_ir.c | 642 /* Transmit next byte */ 908 __u8 byte = 0x00; local 919 byte = inb(iobase+RBR); 921 byte);
|
/drivers/net/wireless/ |
H A D | at76c50x-usb.h | 228 u8 byte; member in union:set_mib_buffer::__anon3177
|
/drivers/usb/host/ |
H A D | ehci-dbg.c | 60 char buf [46], tmp [7], byte; local 65 byte = readb (&ehci->caps->portroute[(i>>1)]); 67 ((i & 0x1) ? ((byte)&0xf) : ((byte>>4)&0xf)));
|
H A D | imx21-hcd.c | 245 int byte = 0; local 249 byte = i % 4; 250 word += (*p++ << (byte * 8)); 251 if (byte == 3) { 258 if (count && byte != 3) 366 size += (~size + 1) & 0x3; /* Round to 4 byte multiple */
|
/drivers/media/common/tuners/ |
H A D | tuner-simple.c | 39 this value takes the low bits of control byte 2 54 this value takes the low bits of control byte 2 81 /* Control byte */ 91 /* Status byte */ 125 unsigned char byte; local 127 if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1)) 130 return byte; 430 tuner_dbg("setting aux byte: 0x%02x 0x%02x\n", buffer[0], buffer[1]); 704 /* Bandswitch byte */ 754 /* Write AUX byte */ [all...] |
/drivers/mtd/nand/ |
H A D | alauda.c | 60 u8 id; /* id byte */ 402 size_t byte = from & al->bytemask; local 403 size_t cplen = min(len, mtd->writesize - byte); 410 memcpy(buf, bounce_buf + byte, cplen);
|
/drivers/sn/ |
H A D | ioc3.c | 102 static void nic_write_byte(struct ioc3_driver_data *idd, int byte) argument 107 bit = byte & 1; 108 byte >>= 1;
|
/drivers/media/video/cx231xx/ |
H A D | cx231xx-core.c | 364 * need chop to 4 byte per request 451 int byte; local 460 for (byte = 0; byte < len; byte++) 461 cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]);
|
/drivers/staging/ft1000/ft1000-pcmcia/ |
H A D | ft1000_hw.c | 793 // check for odd byte and increment to 16-bit word align value 931 //copy odd byte from fifo 979 u8 byte[2]; member in union:__anon5176 1212 convert.byte[0] = info->DspVer[0]; 1213 convert.byte[1] = info->DspVer[1]; 1215 convert.byte[0] = info->DspVer[2]; 1216 convert.byte[1] = info->DspVer[3]; 1512 DEBUG(0, "Flush Data byte count to dsp = %d\n", i); 1668 // Need to read one more word if odd byte 1832 // Check for odd byte [all...] |
/drivers/usb/gadget/ |
H A D | pxa25x_udc.c | 546 u8 byte = (u8) *ep->reg_uddr; local 558 *buf++ = byte; 595 u8 *buf, byte; local 602 byte = (u8) UDDR0; 613 *buf++ = byte;
|
/drivers/atm/ |
H A D | idt77252.c | 381 u8 byte; local 394 byte = 0; 396 byte <<= 1; 401 byte |= idt77252_read_gp(card) & SAR_GP_EEDI ? 1 : 0; 409 return byte; 415 u8 byte; local 442 byte = 0; 444 byte <<= 1; 449 byte |= idt77252_read_gp(card) & SAR_GP_EEDI ? 1 : 0; 457 return byte; [all...] |
H A D | zatm.c | 191 align = 32; /* for 32 byte alignment */ 1137 unsigned char *byte,unsigned short cmd) 1141 *byte = 0; 1145 *byte <<= 1; 1146 if (eprom_get(zatm_dev,cmd) & ZEPROM_DO) *byte |= 1; 1136 eprom_get_byte(struct zatm_dev *zatm_dev, unsigned char *byte,unsigned short cmd) argument
|
/drivers/scsi/ |
H A D | dc395x.c | 196 u8 cfg0; /* Target configuration byte 0 */ 198 u8 cfg2; /* Target configuration byte 2 */ 199 u8 cfg3; /* Target configuration byte 3 */ 1992 * We have transferred a single byte (PIO mode?) and need to update 1994 * entry to either point to next byte in the current sg entry, or of 2105 * The counter always decrement by one for every SCSI byte transfer. 2120 "data_out_phase0: Discard 1 byte (0x%02x)\n", 2282 I just assume it's on a 4-byte boundary */ 2290 u8 byte; local 2291 byte 2315 u8 byte = DC395x_read8(acb, TRM_S1040_SCSI_FIFO); local 4003 trms1040_set_data(unsigned long io_port, u8 addr, u8 byte) argument [all...] |
/drivers/i2c/busses/ |
H A D | i2c-highlander.c | 297 dev->buf = &data->byte;
|
H A D | i2c-bfin-twi.c | 125 /* Get read number from first byte in block 421 iface->transPtr = &data->byte; 433 iface->transPtr = &data->byte;
|
/drivers/pci/hotplug/ |
H A D | cpqphp_nvram.c | 55 } byte; member in union:register_foo::__anon3803
|
/drivers/s390/scsi/ |
H A D | zfcp_fsf.h | 301 u8 byte[FSF_STATUS_QUALIFIER_SIZE]; member in union:fsf_status_qual
|
/drivers/staging/comedi/drivers/ |
H A D | ni_daq_700.c | 72 void (*write_byte) (unsigned int byte, unsigned int address);
|
H A D | ni_labpc.c | 412 static inline void labpc_outb(unsigned int byte, unsigned long address) argument 414 outb(byte, address); 422 static inline void labpc_writeb(unsigned int byte, unsigned long address) argument 424 writeb(byte, (void *)address); 1347 /* clear flip-flop to make sure 2-byte registers for 1552 /* clear flip-flop to make sure 2-byte registers for
|
/drivers/staging/rtl8187se/ |
H A D | r8185b_init.c | 1755 u8 byte; local 1759 byte = read_nic_byte(dev, MSR); 1760 byte |= MSR_LINK_ENEDCA; 1761 write_nic_byte(dev, MSR, byte);
|
/drivers/usb/serial/ |
H A D | ti_usb_3410_5052.c | 145 __u8 mask, __u8 byte); 1608 __u8 mask, __u8 byte) 1615 dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", 1616 __func__, addr, mask, byte); 1631 data->bData[1] = byte; 1607 ti_write_byte(struct ti_device *tdev, unsigned long addr, __u8 mask, __u8 byte) argument
|
/drivers/edac/ |
H A D | i5100_edac.c | 287 #define I5100_DIMM_ADDR_LINES (6 - 3) /* 64 bits / 8 bits per byte */ 698 u8 ch, u8 slot, u8 addr, u8 *byte) 725 *byte = i5100_spddata_data(w); 697 i5100_read_spd_byte(const struct mem_ctl_info *mci, u8 ch, u8 slot, u8 addr, u8 *byte) argument
|